The easiest way to unbrick an ELRS receiver

Подписаться 331 тыс.

Просмотров 12 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the Radiomaster USB Programming Adapter at:
* Radiomaster - bit.ly/4alCrJm
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
---
00:00:00 - What if you bricked your receiver?
00:00:52 - ExpressLRS "bootloader" mode
00:01:29 - Why Betaflight Passthrough sucks
00:02:26 - Radiomaster programming adapter is better!
00:03:32 - Set up ELRS Configurator
00:04:49 - How to put the RX in bootloader mode
00:05:57 - Align the pins correctly
00:06:30 - Flash!
00:07:16 - There are pro's and con's here
The fastest, easiest way to bind an ELRS receiver:
• Easiest Way To Flash a...
ExpressLRS Model Match:
• Discover the Power (an...

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@tomelpunktfpv 18 дней назад

Thanks Joshua Bardwell, you made my start into fpv possible, otherwise i wont get anything done :D

@warrenjervis7640 21 день назад

As a non-ELRS user, we watch to the end because its good for your metrics!

@daRealGamer22 21 день назад

I'm working on my first build. I already blew out the 5v BEC and had to hook up an external 5v regulator. Today, I will be working on my elrs receiver so this video is good timing

@Arek_R. 22 дня назад

You didn't need the pogo pins at all, you also didn't need to solder it. Just needed a pin strip and you just tension it against the pads on the receiver. At my workplace we literally use this technique during development and even on production (tho the products have normal holes not castellated edge). Works 99.9% of the time. The drivers even for obscure chinese USB-UART adapters are most of the time installed automagically by windows so you shouldn't need to download the drivers separately.

@hankhasemeier6887 21 день назад

That's actually insanely good info. Thank you

@bulufish8208 22 дня назад

Thanks for keeping us updated on this hobby. Hey they don't have to watch the video on elrs...................

@LehtusBphree2flyFPV 19 дней назад

Instead of pogo pins I wish there was an adapter you could just slide the RX into like a SD card reader and have the freedom to do more.

@marcosricardoFPV 19 дней назад

I have been doing this with a few different Serial-USB adapters and it worked with all of them. The best one is the Arduino, which I also use to play in simulators

@CapnBry 22 дня назад

It's not a bind button it's a boot button! 😅 I wish the pogopin part on these adapters had a built in push-push power switch in them so I could get it all lined up before I applied power. This was a great description of all the things you need to know, and what problems you'll run into. Perfect!

@Belrmar 22 дня назад

Well, now it kinda is right?

@aaron6516 22 дня назад

You are the reason most of us can fly!!

@DaywalkerFPV 21 день назад

Man! I have the one from BetaFPV. I didn't know i could've pre-flashed all of my RX's beforehand. Could've had em all ready to go while waiting on other parts. Thanks JB! I'll def be using this in the future.

@patrickgidusko281 18 дней назад

When are you going to post the video about full setup on iNav on your chimera7? I’m looking forward to that!

@MCsCreations 22 дня назад

Thanks a bunch for the tutorial, Joshua! 😃 Stay safe there with your family! 🖖😊

@Nik_FPV621 17 дней назад

Are you gonna review the 2207 aos supernova?

@Cre8ionz. 19 дней назад

❓Happymodel ELRS Rx - double blinks: short and a bit longer (the blinking code isn't mentioned in the ELRS Wiki) (I can flash it but the problem stays - doesn't connect to my radio)

@423chriscampbell 17 дней назад

Your videos are helping a lot. Once my parts come in and I get it built any chance I could get you to meet up in the area by “the duck pond” to test it out lol.

@gunasekharansuppaiyan450 20 дней назад

Joshua I want to bye it because it is the one diy kit at low price

@gunasekharansuppaiyan450 20 дней назад

Joshua I wanted to buy "Beginner DIY FPV Drone Kit - QAV-S 2 Joshua Bardwell SE 5” - Analog" kit every time I went to check it for buying it says out of stock

@parkourrush3820 22 дня назад

Yesss

@jiatan_fpv 22 дня назад

Maybe use your Bambu to print a clip to hold the test pins :)

@PiDsPagePrototypes 22 дня назад

Wish more gear was able to be unbricked that easy

@MikeCarr07 22 дня назад

So what's the secret to keeping the fun-tak clean and not end up a blob stuck in a plastic drawer? Also, do you have issues with it sticking to parts?

@blanza215 22 дня назад

Expresslrs... because I learned something one day.

@TohikaChophy 17 дней назад

Please help me I delet my radiomaster boxer elrs sd card and now I'm facing problem how to fix this problem and how will I get sd card file for radiomaster boxer elrs

@Mupshot 22 дня назад

I solder a wire to bridge them, then cut the wire. now I dont have to hold anything and can just tape them up for use later.

@Nik_FPV621 22 дня назад

has anyone an idea what the humongus quad in the lower left corner of bardwell in the intro is?

@juliomatta1683 22 дня назад

If using a FTDI do you need to download the USB to UART driver for the COM port to appear?

@JoshuaBardwell 22 дня назад

You need whatever driver is correct for your FTDI adapter.

@jiatan_fpv 22 дня назад

You definitely don't need telemetry off FYI. Once passthrough is enabled all other BF functions aren't running (it's an infinite loop that only processes the data for the passthrough), the only way to exit is to turn FC power off and on again.

@JoshuaBardwell 22 дня назад

You might need telemetry off because the configurator will try to automatically activate passthrough mode without you having to go to the CLI. And for that to work, the configurator needs 2-way communication with the FC.

@duraesc 20 дней назад

👏👏👏

@kennykobi 22 дня назад

C-3PO say huh lol 😂

@jiatan_fpv 22 дня назад

Pro tip: if you use test clips instead of pogo pins you don't have to hold them while flashing. That's how I used to flash my R9 receivers before soldering them to the FC..

@JoshuaBardwell 22 дня назад

I talk in this video about why I dislike test clips for this purpose.

@butcher 22 дня назад

Never bricked a receiver, but to be safe, I write a comment here whether I will come back years later :D

@Doboxik 22 дня назад

I put mine on a shelf for 2 months and gave up on fpv. When i decided to try again it was unbricked

@gunasekharansuppaiyan450 20 дней назад

Pls reply

@CarlPaulsen 22 дня назад

Oh, another video about something to do with ELRS

@JoshuaBardwell 22 дня назад

Yayyy! The most popular control link in use today is getting the attention it deserves!

@bulufish8208 22 дня назад

Well said 👏

@CarlPaulsen 22 дня назад

@@JoshuaBardwell I only typed exactly what you said in the video at 8:36 😀 I use ELRS exclusively. Thanks for the vid...

@PsychonautFPV 22 дня назад

i'm retiring my dji rc and ordered a boxer, and like a little devil out of a box JB. makes this vid. every time a bullseye with this guy. Amazing! tnx JB.