The Final Panel - Ultimate Custom Desk Build 

My man got the ADHD Premium Ultra Plus

I've been dwindling off watching electronics on RU-vid because 90% of the content is watered down, they skip over the in-depth build process, the challenges and solutions along the way, like you said, the iterative process. This video is the perfect mix between technical depth, the journey of problem solving, awesome factor, and entertainment. By far the best DIY electronics video I have came across in a very long time. Top work Cam!!

This has been such a satisfying build series to watch, looking forward to see what the custom PC is going to be like!!

This is, hands down, my favorite RU-vid channel right now. Just fantastic.

"I'm not a designer but I really like designing things!" - 3:59 Truely Inspirational😂😂

cam really is the only youtuber that im subscribed to where i immediately click on the video, you never fail to amaze me cam!

Your are right focus on cable management and the foam underside and it will be so cool!

This has to be singlehandedly one of the coolest desks I've seen.

so interesting and loved the video and film making!

Not only did you create a video showcasing this awesome project, but you also provided us with the plans and models for it. Awesome content!

I have a dream to build a an entire set up like this

The moment you realised it all fit, gave me instant goose bumps. Absolutely love this project. Super excited for the next one.

This would be my dream project if I owned a laser cutter and had any confidence in soldering. I would love to make a highly customized solution like this. Maybe someday... Never had any formal training with CAD software, but as a graphic designer I have plenty of experience with Illustrator, so I use practically the same method for designing complex 3D printed mounts. I recreate my precise bits in illustrator then import that SVG into TinkerCAD and kit bash everything together.

MAAAAAATTTEEEEEE!!!!! So bloody stoked to see this all come together! Got those chills with you. Good luck w/ the cable management, with the amount of tech you're cramming in it's worth looking into some form of cable labelling. My desk is a dual display PC and Macbook setup run through a HDMI/USB switch (via thunderbolt dock) and the takeaways from a tonne of cable management iterations over the years due to component failures and moves would be; - Draw and maintain a labelled wiring diagram, both intended design and "as built" once done. - Label each cable at Source, Output and mid-run. Especially important if you end up using more than one plane (X/Y/Z) - So you can hotswap cables ideally have each managed seperately. If not, then manage groups applying "seperation of concerns" - In an ideal world I'd find a way to use "junctions" to seperate "zones" and run appropriate length cables between. The idea being that if I wanted to swap my monitor cable I just have to swap the cable from [[ Monitor Desktop Junction ]] rather than having to remove the entire cable run back to the PC. This would have been invaluable when the DisplayPorts on my GPU went and I had to swap to the HDMI and USB C outputs. - To minimise wear and tear from bumps and day-to-day vibrations on ports/connections, fix and secure as close to the port as practical. Love your stuff man and pumped for what else you dream up.

"It's not gonna fit" hahaha, the moment you realize you forgot something and now you have to think about another solution, good thing it was a "little" change, 12:29, that was literally me waiting for it, man hahaha, I'm so excited to see what you do next, that custom PC is gonna be awesome I know it for sure.

AMAZING! There is nothing like building custom items for a desk for the specific tech you use. Great video and short enough so as not to bore the viewers. You are truly gifted!

Loved the entire process. Killed it.

Man, this is one of the BEST DIY/desk setup video on RU-vid, I can't wait for the next video to drop!!

Really enjoyed this entire collection of videos. Congratulations on your desk setup! You're a fantastic creator!!

This is FANTASTIC. Love it

Dude great work and dedication. This is showing your real talent of showing what's in your head

Made my freaking day ! Quite the build ! And without the use of expensive tech in general ! You did an amazing job !

Bro never disappoints

This is SICK

This video was so wholesome. It's the first I see from you and I promptly subbed. Thanks for sharing your talent.

As a fellow Aussie, I am glad I have stumbled across your channel, I have binge watched pretty much all of your recent videos (mainly the desk build) over the last few nights. Subscribed and can’t wait to see what you do next! Keep up the great work mate.

This project has been so fun to watch. I don't have a clue what you're doing 90% of the time but in a world of problems you are a solutions person and I love it. Well done.

what a beautiful desk!

Amazing job man!! It's impressive and your desk look f* awesome!!! 🤯🤯🤯

Fantastic man. Love it.

First time seeing your channel or hearing of you. Enjoyed the video and the format. Subscribed. Cheers!

Good job! It looks incredible!

Awesome job Cam. Keep it going💪

I found your channel about 3 videos into the desk build and have seen each part a few time. Love the great Custom work you're doing. Huge fan!

after watching this, I AM STOKED! this is just absolutely gorgeous, and i CAN NOT wait for that next video! Nice work cam!

That's really impressive craftsmanship and creativity. Keep up the good work.

Nicely done!

OVERALL this is dope!!

Unbelievable!! Great work dude!

10:05 next time you have an issue Like that, you should know, there are These Things called Heat Set Inserts. Basically Just a little brass nut, that you can Melt into your plastic, so that you have a thread within your Part. They are quite cheap and super usefull!

Man, this is so wild. Easily the most creative desk setup on RU-vid (or dare I say...the internet?) Incredible work you've done here. Nicely done! 👏🏻

Bravo!! You really captured how it is to fit existing tech into a re-purpose or different enclosure. Back in the days before 3D printing I did a lot of this type of thing and have gained a lot of experience over the years, not always successful, but that's the incentive to improve (I bricked an $800 VST player once!) With that knowledge, I would say you did very well!

Amazing proyect!!! Can’t wait for the next one

Love this, so unique to you in so many ways. Much better than the 'custom setups' kinda videos, this has depth ! nice work

Great work, just stumbled upon the playlist while skipping through yt i wanted to such things myself some time but havent quiet got the idea where to start nice inspiration keep up the pace

Loving this work man!!! Great stuff! And I wish I had your level of patience haha

Dude what. This is insane. So cool.

Bro this is phenomenal!

Looks absolutely fantastic!

Amazing stuff mate. I’m saying “I was here” now, so I can come back in the future at 1 million subs and revisit

This series has straight up been one of the most interesting series I've ever watched! Seriously incredible job Cam! Can't wait to see what you do in the future :)

nice job dude, real clean aesthetic

looks amazing

This is so sick! Well done!

Looks amazing great work

your video came up on my recommended this project is insane love what you did with all the other tech, looks very teenage engineering inspired (Swedish house mafia tour console in paticular) subscribed cant wait to see more stuff in the future.

Amazing work very inspiring, can't wait to see more.

what a beautifull set up. I hope one day i can build one like that

Good job, looks great!

Exellent! I've just watched the entire serries and i did'nt know you before! Very good work, that is my dream too ^^ Thanks for sharing your work!

Amazing stuff. This series gave me huge motivation and inspiration for my next custom setup. I didn't even know I wanted a different setup from what I have now, yet here we are. Thanks for the ideas

Very satifying to watch! Thanks.

This really was a great project!

That looks amazing

I've really been enjoying seeing your whole process. I'd love to do my own custom desk build some time, and what you've done is really inspiring.

I've seen a lot of desk build videos but nothing like this... next level insane!

That's freaking sick!

Sick build mate. So glad I found you when I did. We need more people like you on this platform!

I love your work¡¡, im slowly getting mor and more into product/industrial design and this project is such an inspiration.

Well done!

BRO THIS IS SO COOOOOOOOOOOOOL SO HYPED TO SEE WHATS NEXT

Brilliant job! I don't think I would have the patience to get this done, but the look is phenomenal. Keep up the work. Subscribed.

gotta love that you set up a new project to go into after this one, looking forward to it!

Duuuuuuude yes!! It is looking so amazing! I am so stoked for you. The physical hacking you are doing is so fun, I love the time and effort and patience you have for these tiny things you have to worry about to make it all seamless. Just brilliant. Cannot wait to see the pc get started! Congrats mate

Man, your videos are SO inspiring, definitely one of the best YT channels!! Keep it up!

This is awesome!!! Wow i m folloowing this project since the begining and i have to say that this is the best setup I have seen

Really freaking cool. Congrats on finishing this beast of a project.

Amazing 😻 how it turned out

Very nice! And also as a ham radio guy, if the ham radio guys see this they'd love it too. Our radio desks are always screaming for panels and organization. Well done!

so amazing dude, you're rocking🤯

This looks so amazing! I could never use this as i rest my arms on my desk, but this looks amazing!

Wow what an effort you put in this vision. I got to say this looks verry good and all the hard work paid out at the end. Well done !

this is so rad.

This is super cool, and I'm so glad you managed to get everything fitting together and working how you imagined it! And I can't wait for the custom PC...

I'm loving these, and has me wanted to try doing this myself!

work hard and achieve everything . Motivated by you . Thank you

That’s sooooooooooo cool 🤩🤩🔥🔥

Man you’ve grown so much. Super duper proud!!

you are brilliant 👍

great project 💪

Very nice work 👍

I just picked up a stream deck plus today and did my first page of actions and wow im inspired to do something the same!

You are a genius!! Love watching your videos!! 💪

It's been an inspiring project to follow along with. Congrats on the build and looking forward to the next project!

That is a lot of work for a desk but boy was it satisfying to watch it come together.

I got to build something like this, it´s too good!

This is like if someone put all my interests into one video. Youre going to make it man.

the best setup ever

This series has been amazing! Definitely has made so many of us want to design our own dream desk, cannot wait to see how you make a custom PC!

amazing work bro!