The Genius of 3D Printed Rockets

Подписаться 16 млн

Просмотров 12 млн

50% 1

3D printed rockets save on up front tooling, enable rapid iteration, decrease part count, and facilitate radically new designs. For your chance to win 2 seats on one of the first Virgin Galactic flights to Space and support a great cause, go to www.omaze.com/veritasium
Thanks to Tim Ellis and everyone at Relativity Space for the tour!
www.relativityspace.com/
/ relativityspace
Special thanks to Scott Manley for the interview and advising on aerospace engineering.
Check out his channel: / szyzyg
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
References:
Benson, T. (2021). Rocket Parts. NASA. - ve42.co/RocketParts
Boen, B. (2009). Winter Wonder: Rocket Icicles. NASA. - ve42.co/EngineIcicles
Hall, N. (2021). Rocket Thrust Equation. NASA. - ve42.co/RocketEqn
Benson, T. (2021). Rocket Thrust. NASA. - ve42.co/RocketThrust
Regenerative Cooling - ve42.co/RegenCooling
How A Gold Bullet Almost Destroyed A Space Shuttle by Scott Manley - ve42.co/ManleyEngine
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
Special thanks to Patreon supporters: Burt Humburg, Blake Byers, Dumky, Mike Tung, Evgeny Skvortsov, Meekay, Ismail Öncü Usta, Paul Peijzel, Crated Comments, Anna, Mac Malkawi, Michael Schneider, Oleksii Leonov, Jim Osmun, Tyson McDowell, Ludovic Robillard, Jim buckmaster, fanime96, Juan Benet, Ruslan Khroma, Robert Blum, Richard Sundvall, Lee Redden, Vincent, Marinus Kuivenhoven, Alfred Wallace, Arjun Chakroborty, Joar Wandborg, Clayton Greenwell, Pindex, Michael Krugman, Cy 'kkm' K'Nelson, Sam Lutfi, Ron Neal
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
Written by Derek Muller, Petr Lebedev, and Emily Zhang
Animation by Mike Radjabov
Filmed by Derek Muller, Raquel Nuno, Trenton Oliver, and Emily Zhang
Edited by Trenton Oliver
SFX by Shaun Clifford
Additional video supplied by Getty Images & Pond5
Produced by Derek Muller, Petr Lebedev, and Emily Zhang

Опубликовано:

15 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12 тыс.

@drrockf4d 2 года назад

The old joke. "If the weld is stronger than the metal, then why don't we make the whole thing from weld?" Finally joke becomes reality

@Gianfranco_69 2 года назад

Ba-fricking-da-boom... thats funny

@carlojones8610 2 года назад

That wire and other factors make the total structural stress factors all over the surface on a micro scale that they can't find. Slag inside not easy to find. Like the sheet metal press molded auto body .. the stress factors are many and randomly happening on the microscopic surfaces that are hard the find and causes the whole thing to be no good.

@MooneLightEntertainment 2 года назад

@@carlojones8610 so are you saying it's not better to make the whole thing from weld?

@agitatorjr 2 года назад

@@carlojones8610 you should call them and let them know they are wasting money. SpaceX too. They are 3d printing parts as well. You'll be their hero.

@shaider1982 2 года назад

I was thinking the same thing. It now is practical to do it.

@wolfetit 2 года назад

Look at his smile as he talks about every single little step, mistake, success, finished pieces. You can tell he’s passionate about what he’s doing

@darkamagumo716 2 года назад

must be nice being passionate about something

@khatharrmalkavian3306 2 года назад

That's a business smile.

@MrEazyE357 2 года назад

He kinda has to be, no?

@JavierChiappa 2 года назад

Awesome guy and very clear to explain everything.

@rh4009 2 года назад

@@JavierChiappa If rocket science can be explained in simple terms, it might not be rocket science.

@guffels Год назад

Congrats Relativity on your successful Terran 1 launch tonight. So cool to have known so much from this video while I was watching the launch with my coworkers.

@johnvonludd1738 Год назад

Terran1 failed and they will not make any more Terran1 rockets and no more 3D printed tanks. TerranR will be another 1 stage only reusable rocket with some 3D printed parts which will be launched somewhen in 2027. So I wouldn't say it is successful.

@grandmasterautistwizard4291 5 месяцев назад

@@johnvonludd1738 Gotta start somewhere, right?

@JaivianDean 3 месяца назад

@johnvonludd1738 Ima introduce the starship argument; Terran 1 was quite successful since its goal is MAXQ because they wanted to prove its structural integrity. Terran R was only skipped to because of the success of 1.

@Aikano9 Год назад

When I first heard of 3d printing, one of my first thoughts was that in the future you could stick a welder on a robot arm and 3d print metal. Really cool to see a way more sophisticated iteration of that idea being used to 3d print a freaking rocket.

@The_Phoenix_Saga Год назад

And you know what the scary thing is - provided we don't wind up wiping ourselves out or what not: in a hundred years or less - this sort of "revolutionary" technology will be relegated to child's play. I mean just look at the Internet and computers - they were originally devised for advanced means and yet these days kids can do things with them that the original creators would never have imagined.

@id10tbutton 2 года назад

This guy loves his job. Heaps of positivity and enthusiasm. Most excellent.

@TimecastGaming 2 года назад

Most excellent! *Hand guitar solo*

@Ratchet2022 2 года назад

Tim Ellis is the cofounder and CEO.

@xTrqdz 2 года назад

ahh yes!

@bmxscape 2 года назад

yeah if you started a rocket ship company i am sure you would show some positivity about it

@trader2137 2 года назад

that could be a PR move

@Moonbo 2 года назад

The StarCraft referencing was the icing on the cake...

@aer2964 2 года назад

The whole nerdiness vibe really says something about the passion involved with this company.

@thegrape426 2 года назад

didnt expect to see you here

@thesteamengineer442 2 года назад

Oh hi moonbo I see you take inspiration from Veritasium for your builds.

@christianmeeks4430 2 года назад

It's incredibly nerdy and I love it.

@harmsc12 2 года назад

NOT ENOUGH MINERALS

@4g4m3n0n Год назад

Well.... it worked!!!! I just watched their launch video and it was amazing! To get through Max Q and first stage separation on their first try with a 3d printed rocket is just nuts. I heard about Relativity for the first time here and was really skeptical about it working, but I'm so glad it did.

@masterimbecile Год назад

Looking for such a comment. It wasn’t a 100% success, but at least the part we’re interested in seeing did make it.

@johnvonludd1738 Год назад

@erinaisshu Год назад

@@johnvonludd1738 i mean it was more successful than the first Starship launch ;)

@johnvonludd1738 Год назад

@Erina Isshu I'm not against failing, I'm against using wrong ways to do something and trying to convince everyone that it's the best way just to give up on it later and start making things like everyone else.

@benayers8622 10 месяцев назад

@@johnvonludd1738 He said "smooth surface is same as rough aerodynamically" i wouldnt let him near anything technical if thats an example of his intelligence! I hate spoilt rich kids with a vengeance, wastes of oxygen. Bout time we gave the best opportunity to poor people. The rich can be eduated to enjoy their inheritance and not be greedy and the poor can be taught to better themselves for their kids future. The current system is broken the rich bend evry rule law and tax in their favour as well as take all the decent jobs because it dont matter how clever or good you are its about being born rich enough and next its who do you know so again the rich employ and help their rich mates dont matter theres a faster better harder working option cos sadly wev let democracy totally fail and none of that matters anymore

@starcrashr Год назад

The aerodynamics of 3d printed parts are pretty surprising. Some experiments have shown that the texture forms a cushion of air that actually reduces friction.

@ohioplayer-bl9em 7 месяцев назад

Like a golf ball..

@MrTsiolkovsky 3 месяца назад

like a golf ball

@Terrestre1 3 месяца назад

Or shark's skin

@halbarad7932 25 дней назад

Almost unbelievable

@DoodleChaos 2 года назад

We must construct additional pylons

@-SquareBird- 2 года назад

Yeah, 3D PRINT PYLONS

@theonetralewolf 2 года назад

We must construct additional pylons.

@nerdsmith_uk 2 года назад

We need a DoodleChaos liner rider hitting the pylons!

@MarcusOania8 2 года назад

WE MUST CONSTRUCT ADDITIONAL PYLONS!

@kman6004 2 года назад

RUSH E

@LitchKB 2 года назад

As a hobby welder, this was really interesting. The fact they wrote their own software to compensate for warping so well blows me away.

@korok2619 2 года назад

there must be some hardcore AI engeneers at works there

@pavellelyukh5272 2 года назад

@@korok2619 this is so freaking obvious, this could applied to fdm, ultra fast antiwarping printing, although I rather print scram jet parts at 4500C instead using classified solid state flame synthesis 3D printing using planetary ball milled nano composite metal-ceramic powder. Mentioned the 3D printing idea to a post doc in 2018, couldn't talk about his DoD research, but my creativity isn't classified and I'm an anarchist IDK what they did but I think my approach has a chance of succeeding .

@TauAlphaVu 2 года назад

Seriously, the fact that they modeled thing so well that they intentionally print it "wrong" so that when it warps it will be exactly how they want it is really *really* impressive.

@niladrimukherjee7 2 года назад

It's actually easier to use ML to control defects than what you feel. I feel very excited thinking about what future holds for us

@JesusHerrera-vx2pn 2 года назад

That was the most impressive to me

@max2562 2 года назад

I love the idea. I've been watching 3D printing grow to serious industry for a while now, but haven't seen something this ambitious. However, there is something that may need to be considered and that is the standardized testing that is typically performed on equipment like this before it is considered flight/space worthy. Currently, Non-destructive testing (NDT) is performed using many techniques, all of which are designed to look for discontinuities on material surfaces or porosities in welds, etc. When things are 3D printed they are not formed or created in the same manner and so they may or may not have the same types of flaws that are found by modern methods searching for these flaws. I mean to say, it is hard to tell what types of imperfections or flaws we might see as the norm within 3D printing. It could be that the material is better in every way. There just needs to be more testing and research in these larger scale things that 3D printers can create.

@stevegarcia3731 2 года назад

I hear you loud and clear. The imperfections within the material are something that has to prove itself. Years ago I did design work for ASME Code VIII pressure vessels. We tested Japanese flanged and dished heads for the radius ends of the vessels. The Japanese steel of the day had a problem with voids that arose when forming those heads. Big failure. But testing had to be done. 2 years later Japanese steel was higher quality than from U.S. Steel Corp. But the welding process used here is so controlled, my guess is that testing will give great results. Small welds have very much less wattage than heavier welds. I also see this as eliminating 'stress risers', which are serious failure points if they exist. All metal products start out as molten. That used to be in like Bessemer furnaces. Melting it as it is built is so effing cool. Removing all the machining and forming steps is a quantum leap in manufacturing slash assembly. Removing the individual parts and cutting down on how many - that is absolute genius, whatever company does it. I am retired now, but if I were 25 or 35, this is a company I would want to work with. The amount of creativity they get to do would have suited me perfectly. limi

@steamboi5208 Год назад

3d printing plastic is is now affordable to any one, the Positron v3 is like $90 more precise that almost any non resin 3d printer and it can FOLD the thing can fold into a shape smaller than a laptop adding on to that is is among the fastest plastic 3d printers ever.

@erikgrahn3363 Год назад

Spray it with spot checker and x ray it

@dethtour Год назад

I do inspections for the refineries. CWI and various API's stuff like this won't get x-rays. They'll end up doing UT (Ultrasound testing) due to how big it is. With a UT they can see any imperfections in the metal without using dinosaur sized film for X-ray. I'm pretty sure they check PT (Penatration testing) and before doing the UT. Interesting how simple this process is. I'm pretty sure porosity can be mitigated in a room filled with argon gas to keep the filler clean.

@max2562 Год назад

@@dethtour I can't imagine the PT process for something this huge, but UT has come so far that it would likely be very easy. The problem I'm seeing now is that they talked about wanting to have this technology on Mars to make equipment there. I know they want to create buildings and structures, which arguably would not need much NDT, but if they are planning on creating anything space worthy while on Mars then there may be issues with that. The only way is if they created facilities large enough like hangars to house the equipment and have atmosphere. UT might be best without atmosphere, but I haven't really ever thought about that before. Regardless, there still is atmosphere on Mars just not much of it. Gotta wonder tho, if the low oxygen and no water environment will be a large enough advantage to the equipment's prolonged use.

@jakubgro 2 года назад

You got urself a new follower Relativity, really like the vibe and the direction you're going with. I believe manufacturing will be "printed" of some kind, master it and show the world how its done. Big thumbs up.

@Syy 2 года назад

I ADORE that the whole company is full of Starcraft nerds.

@shadowcheto85 2 года назад

@cnmmd qiuoo Not enough Printer Spools The "we regularily joke that we need to build additional Pilons" just got me. The Final rocket will for sure be called a Carrier. Or OR Gantrithor (Tasadar's Carrier)

@imbobb 2 года назад

Well you kinda need people that needs to know about spacecrafts to like... Build a spacecraft...

@imbobb 2 года назад

@Kenric Young dude i literally was just saying you need people that knows about spacecrafts for a company like this.... calm down...

@imbobb 2 года назад

@Kenric Young when did I ever say that.. I didn't assume they don't, my comment was saying the opposite of what you somehow thought I said..

@dfsdfsdfdg50 2 года назад

Carrier has arrived !

@MissingChunks 2 года назад

As a qualified welder, the reverse warp simulation is amazing. Given the number of variables in the welding process this is very impressive.

@JoshGariepy 2 года назад

As a welding student - im curious how they avoid problems with oxide layer inconsistencies seeing as its aluminum welding. I guess maybe the printer runs cleaning passes before depositing metal?

@vitruvianman7170 2 года назад

As a pressure vessel inspector, I have serious doubts that that tank can handle 50psi of pressure. All it would take is one microscopic flaw in one of the welds would cause catastrophic failure. Welded metal air cooled as it is in this video is way weaker than forged or rolled metal. I would like to see the pressure testresults.

@Jerichoswa11 2 года назад

@@JoshGariepy I'm pretty sure the wave form changes are wiping any oxidation.

@JoshGariepy 2 года назад

@@Jerichoswa11 thats true, but i think it has potential for inclusions regardless unless the printer has some sort of precleaning action prior to adding filler

@vitruvianman7170 2 года назад

@@JoshGariepy agree, if they did the welding in a controlled chamber filled with a gas maybe. This is just a room at ambient temperature. Molten metal that cools at room temperature inherently cracks, when welding, preheating is used and post heating to align the grains in the welds. My bet there is cracks all through these welds.

@itstisguy1456 2 года назад

The amount of work and people you have long conversations with only to show highlights in the actual video of is truly astonishing man. Thanks for all the time and effort that you put in to each of your videos man

@Vatsyayana87 Год назад

Literally on the pad right now, Good luck Relativity.

@AtomicFrontier 2 года назад

Whenever I try 3D printing rockets they end up smashed into pieces in the Aussie outback. Guess the secret ingredient was GIANT LASERS! Thanks for the video Derek!

@YokoYokoOneTwo 2 года назад

@@thishandleistaken. hey

@jamismiscreant7514 2 года назад

I’m pretty sure the answer to any high level physics issue is more lasers

@arnabnahiarunabh 2 года назад

Hey @Veritasium Can we expect a video on the poll on your community page stating why most of us prefer odd no.s being red and even no.s being blue??

@ASRocketry 2 года назад

lmao

@jip5889 2 года назад

When is the crossover episode with Veritasium? I am a big fan of Atomic Frontier!

@Erik-pu4mj 2 года назад

This is quite the incredible company. I'm particularly impressed with their algorithm enabling them to print warped in order to cool straight.

@aleciacarpenter7856 2 года назад

This is the best comment in the comment section! Super impressed with Ellis and Relativity Space!

@anirudhasinghthakur6435 2 года назад

Yeah that's a huge deal.

@tomk3732 2 года назад

This is standard stuff in metal 3d printing - just here a lot of it is done with an actual welder. The 3D printed parts are also made larger so they can be heat treated and end up with dimensions that frequently are finish machined to proper size.

@madhouse5213 2 года назад

I know this is pretty insane.

@kabotteam 2 года назад

You can also check out resonance filtering in Klipper 3D printer software. It uses resonant frequency models of printhead at high accelerations to cancel ringing, thus enabling faster printing. Oh, and it's free software (free as in speech ;) )

@nathanroberson 2 года назад

@9:05 loved hearing about the brazing. It’s not actual welding. The base metals don’t melt. The best steel bicycle frames are brazed. And it was neat to learn they use brazing to move liquid hydrogen.

@MissSpaz Год назад

The thing about (home) 3D printing is that it can be incredibly frustrating if you expect it to be something you can just set up like a paper printer and you get perfect results right out of the gate. Honestly it can be so incredibly frustrating that I've wanted to throw in the towel. But now I'm printing full body armor for cosplay like Iron Man. In the end, the concept is roughly the same for how this rocket is 3D printed. Pretty incredible.

@HumanBeingSpawn Год назад

Haha yes. I bought a printer about 3-4 months ago but didn't have time to start printing. I wanted to print some items for my house's ceiling fan plumbing and I thought I'd just upload my GCODE and press PRINT . Nope. You have to tune the damn thing based on filament and other factors. I'm learning quickly. I've printed 2 functional items so far and I'm loving it. My goal is to add another printer because waiting for ~10hrs is painful

@mortenrobinson5421 Год назад

I've been wanting to get a 3D printer, but now you are scaring me. I do work in an office with a 3D printer and some skilled design engineers though, so maybe I can get some pro tips at work?

@doulos5322 Год назад

add a BL touch I haven't leveled a 3d printer except the initial setup in years.

@Fluffy3DP Год назад

@@doulos5322 I recently got a kingroon kp3s, I made the mistake of not leveling it properly the first time, and I made a hole in the middle of the magnetic print bed. I want to add the sensor for auto leveling, but I'm not sure.

@Fluffy3DP Год назад

@@mortenrobinson5421 3D printers are really cool, and I think you should get one. I got the kingroon kp3s, which is relatively cheap. Make sure you learn how it works (basics, nothing too fancy). I usually print small models, and simple things though. Get one once you think your ready, and make sure you join help forums, or ask for help, because you will need it.

@midimusicforever 2 года назад

"3D printing ain't rocket science." These guys: Hold my beer

@Predated2 2 года назад

To be fair, the point of science has always been to understand more so we can make life easier. If we have a proof of concept of such a rocket going to space with relatively normal expectations, we could cut the price of space missions in half, if not more. But what to do for all those rocket engineers? Focus more manpower on developing better 3D print systems, perfect the systems that have to go inside the rocket.

@AxxLAfriku 2 года назад

I have a big... BIG... BIIIIGGGGG... muscles!!! HAHAHA!!! What did you think I was going for? That's so DIRTY of you! GAGAGAGA!!! I am the funniest RU-vidr ever! Maybe that's the reason why I have TWO (!!!) HOT (!) GIRLFRIENDS. Thanks for being alive, dear mi

@h-hhh 2 года назад

@@AxxLAfriku ok

@CombraStudios 2 года назад

Even rocket science is so easy it's not rocket science

@dragon.fromindia3235 2 года назад

GOD PLEASE DECREASE GOLD PRICE

@gothemcloud 2 года назад

I recognized Scott Manley's voice way before his face was on screen. What a LEGEND.

@masterofwriters4176 2 года назад

I knew I wasn't the only one.

@loganmoon380 2 года назад

Same, all those hours of ksp tutorials...

@remliqa 2 года назад

Same, I actually had to check if I opened up another tab for Scott Manley video by mistake when I heard his voice.

@quantumrandomness5114 2 года назад

how unexpected that scott manley appeared lol

@CJordanNicholson 2 года назад

Awe, I need to start playing Kerbal again.

@5845623 2 года назад

A great story, makes you wonder what else will be metal 3D printed that we never imagined. Thanks for the tour and the information.

@Zaid0611 Год назад

The genius behind all is the creator who design and build this 3D Printer.. Just incredible

@Caspar_Stanley 2 года назад

Love that Scott is credited as "Internet Rocket Scientist". Just how he describes himself, and incredibly accurate 😂

@livedandletdie 2 года назад

Scott Manley is a legend, an absolute Legend, there's no other epitaph or superlative that could be used to describe him.

@my3dprintedlife 2 года назад

I heard his voice and smiled!

@Caspar_Stanley 2 года назад

@@my3dprintedlife Me too!

@coltrinculo703 2 года назад

@@my3dprintedlife yes

@jake_ 2 года назад

I thought "hey, this guy sounds exactly like Scott Manley" and a few seconds later he appeared on screen..

@smartereveryday 2 года назад

This video was fantastic. I love how it embraced the philosophical implications. I thought Scott's comments at the end about the future of 3D printing rockets were very interesting. Man, what a great video.

@akshits630 2 года назад

HI DESTIN!

@cauchyschwarzkabhai257 2 года назад

YO DESTIN!

@donaldtrump2598 2 года назад

A living legend has arrived

@savepalestineuyghurs7735 2 года назад

Waiting for something even cooler from you...

@JWilliams12117 2 года назад

Destin's just shaking his head about the lack of Laminar flow over that bumpy rocket.

@kiaraquinn9130 2 года назад

love to see great educators teaming up to spread information to the masses

@arthurprior4638 Год назад

Caveat occurs at 5:00 when he explains that this manufacturing method adds 5 to 10 % mass compared to traditional methods.

@243WW 2 года назад

Don't care what he's building, flying to Jupiter or whatever, the fact that he's worked out the distortion into the weldment has got me sold. Nice job.

@gnatdagnat 2 года назад

Yea I thought that was insane, how can it be a predictable pattern which they can reverse engineer? Who tf would have thought to try that?

@SyrupSplash 2 года назад

@@gnatdagnat Rocket scientists who understand physics at a level so unbelievably high above our heads In seriousness I think material scientists would hold the crown on that achievement

@noanyobiseniss7462 2 года назад

@@SyrupSplash They are too busy wasting their time trying to figure out how to create materials to fail for forced obsolescence.

@slateslavens 2 года назад

yeah. ^^^ this.

@djbabidadi2545 2 года назад

Yeah, time to invest for sure. EDIT: Apparently the private sector is very interested, so there's no immediate plans to go public. :(

@flatbill2 2 года назад

I love that Scott Manley is delivering all of the technical details!

@cengizteouluyurt7053 2 года назад

The second i heard his voice i knew video is gonna get lit afterwards. Such a amazing guy

@jackp.1711 2 года назад

Yeah, the founder is clearly a very smart guy, but I would rate his tour 4/10. And his English 3/10. Scott Manley basically saved the video.

@annando 2 года назад

When Scott is speaking about something you instantly know that the content is well thought and correct.

@coenraadloubser5768 2 года назад

Yes... great video... but I hate that Derek is going real low on his sponsors :~-( I don't think any amount of money is worth supporting some of the last ones.

@YuriusSan 2 года назад

Bruh. His name is manly

@bluetech2809 Год назад

I could definitely see SpaceX acquiring them and keeping the entire team there just with way more resources at their disposable.

@sfguzmani Год назад

I would love to

@nick_0 Год назад

Sounds good, but also having theme compete for the low orbit market sound's like a good way to boost innovation for both companies.

@--Nath-- Год назад

Except you'd have Elon as a boss.. I'd be the hell out of there if you wanted to work for any sort of decent company..

@AlexanderNash 11 месяцев назад

Competition is good

@dsdy1205 8 месяцев назад

The founder was actually an intern at SpaceX before he decided to strike out and start Relativity

@zdeneksc2895 Год назад

I hope they leveled the bed before.

@SilliS 2 года назад

Nice, nice... So are the STLs on Thingiverse yet or...?

@kele9891 2 года назад

Milloin uusi agu angka video

@SuperJompaVideos 2 года назад

Milloin uusi agu angka video

@kevinshen9391 2 года назад

lol

@alexsmith7801 2 года назад

@@ArmorLightning uhhh can I use PETG? I don't have an enclosure.

@ocdkirby 2 года назад

The scaling was off, I imported it and it was huge

@stenlykorn28 2 года назад

I showed this video to my dad who have been working all his life at one of Russian Rocket assemble plant until recent retirement. He was one of leading engineers and knows thing or two about rocket stuff. At first he doubted about 3d-printing from scratch such complex structure like spacecraft but when I translated all mentioned solutions for different issues he got truly amazed by the progress of such technology. He even forget for a moment all his anti-usa biases raised by soviet and Russian propaganda and had said - "This is our future. Hope, they gonna do the best for humanity."

@commanderofkesariyaknights 2 года назад

In Russia, future 3d prints the past

2 года назад

Good thing 3d printers exist everywhere. Pretty sure China and Russia are watching this video and taking notes.

@peterpike 2 года назад

@@Solid_Snake88 -- Why wouldn't they be when you have an entire political party and all the media in the West constantly accusing Russia of being behind every election they dislike?

@thorblast7896 2 года назад

@@Solid_Snake88 lol! usa is anti russia and china aswell my friend. wtf are u talking about?

@kingdodongo4126 2 года назад

@@Solid_Snake88 go away with your shitty vision of world politics we are about science here

@pratheekec 2 года назад

This almost looked like a sci fi movie.....seriously inspired by these men who are revolutionizing everything...much love

@karthikaddanki7749 Год назад

Naming your rockets and equipment after Starcraft is the cherry on top!! You got me hooked..

@fahadsgmustafa 2 года назад

the founder is such a wholesome and passionate guy, wish his company the best.

@aktan4ik 2 года назад

*cofounder

@mac3864 2 года назад

Terrible fashion sense though

@noanyobiseniss7462 2 года назад

@@mac3864 Good engineers could care less what you think they look like, they have better things on their mind.

@FishFatty 2 года назад

@@noanyobiseniss7462 except he's wearing a $200 belt buckle...

@Trias805 2 года назад

@@mac3864 Who cares? Thankfully, his job isn't about appearances.

@fakjbf3129 2 года назад

At a minimum, a company that can rapidly prototype large, complex, and precision parts is never going to run short of potential clients. As Scott said once you get to the point of mass producing parts the benefits of 3D printing get eaten away by dedicated tooling. But if they focus on the flexibility of 3D printing, they can pivot to fill a niche in basically any manufacturing industry.

@thornelderfin 2 года назад

Well said! Plus even if you have dedicated factories for mass production you will still need the 3D printing for prototyping improvements.

@FlyingJetpack1 2 года назад

They can pratically be the company that would handle almost all the prototyping of rockets in the industry. It would be unfeasable for any other company to start this kind of 3D printing factory for their testing from the ground up just for their own needs, especially when there's a company that exists, and is willing to create your machiened pieces with years of experience in the field.

@christophejamoye8394 2 года назад

also note that, just like this shell type fuel tank structure he's shown, really weird shaped metal parts are almost impossible automate with normal tools, so even during mass production, some parts will need to be 3d printed.

@dragon.fromindia3235 2 года назад

GOD PLEASE DECREASE GOLD PRICE

@bronzejourney5784 2 года назад

Always wondered if it will ever be possible to print stuff with/as metals and rock(minerals?). Great stuff. I like the explanation at the end too, its not about who is a billionare or who is poor, its about enriching what it means to be a human being.

@ninehundreddollarluxuryyac5958 2 года назад

Love your description of 3-D printing as that thing you thought would be great but never get a result you're happy with. The beginning of that industry was dominated by start-ups that couldn't or wouldn't do the quality control needed to produce machines that actually worked as advertised. Lack of government or private lawsuits or arrests encouraged this.

@WillN2Go1 2 года назад

I like what Scott Manley said about their developing 3D metal printing capabilities as a solid contribution and business even if they don't make it as a rocket company. I usually just groan when some glassy eyed kid starts talking about 3D printing - because they never talk about material properties or metallurgy. These guys do. That is very very cool.

@neoneo4221 2 года назад

100% fake comment.

@tuscansun2320 2 года назад

@@neoneo4221 ?

@christophejamoye8394 2 года назад

IMHO they definitely should partner with spacex (not merge), SpaceX will have better rockets in the short term (more advanced on reusability), but the direction they are taking here is better for building the Mars base and the long term scaling up of Earth Mars transit.

@Seraphim262 2 года назад

@@christophejamoye8394 So they would lose the 3D printing knowledge to SpaceX and noone will further invest in them? I don't know.

@gracialonignasiver6302 2 года назад

@@christophejamoye8394 I doubt they want to seeing as how the two founders each previously worked for a rocket company, Spacex and Blue Origin, and decided that neither was innovating enough so they quit and started their own company.

@nexusyang4832 2 года назад

The fact this guy wants to create a build a factory through automation is exactly what you do in StarCraft. It all makes perfect sense.

@hu-ry 2 года назад

Time to warp in Carriers and 3D print some interceptors

@listen1st267 2 года назад

I'm still waiting for a reason to make a Colossus. Now that'd be tight

@mikedaniel1771 2 года назад

Pitch meeting references are tight!

@whitealiens 2 года назад

Well ,he said, they need more Pylons. He clearly is not from this planet.

@stdesy 2 года назад

But while you’re doing that the Zerg swarm all over you and you’re screwed

@davidtibben6498 2 года назад

The implications for 3-D printing tools when we eventually get to Mars is amazing. Very excited for the future.

@zdenekburian1366 2 года назад

Better first they buy a 3d cloth print machine able to complete the t-shirt of the poor employee at 4:44

@mukuljobra3972 Год назад

At the end of the video, a crucial question was asked and the totally convincing answer was made. It's really very important to vision about that diverse mentality which may arise between those who will be traveling to space and those who can't afford it. After all we are humans, not the martians. Thanks to @Veritasium (Sir Derek Muller) for showing again, such an extraordinary and commendable work. 👍🏻👍🏻

@DOITWITHDAN 2 года назад

as soon as he said starcraft, I got really invested lmao

@kevinhale8162 2 года назад

It took you 14 minutes to get invested into a 20 minutes video? 😂

@Liam-fd4uh 2 года назад

@@kevinhale8162 yes

@adrianouellette6094 2 года назад

ahhh... I still remember the old Jessica Alba map for StarCraft lol. Now I wanna play the OG starcraft.

@ranveerkumawat5867 2 года назад

@@kevinhale8162 km K K

@ranveerkumawat5867 2 года назад

@@Liam-fd4uhk K Vvk K Vkk V Mmkm Jm

@armedtoe 2 года назад

Scott Manley x Veritasium crossover?… Perfection.

@logicbuilder1204 2 года назад

@@thishandleistaken. This guy who plays kerbal space program and knows a lot of rocket science.

@columbus8myhw 2 года назад

Slim Inkognito One of the people interviewed in this video. He has a RU-vid channel discussing space and rockets

@Hello-vz1md 2 года назад

I hope veritasium do a crossover with Everyday astronaut RU-vid channel

@dragon.fromindia3235 2 года назад

GOD PLEASE DECREASE GOLD PRICE

@skysurferuk Год назад

So... Just ally M.I.G., then. I've always seen that since my first 3D printer (retired Boilermaker), but quickly realised the massive tech issues that'd be needed to be overcome. Good to see it actually done, & love the close-ups of the process. Great work, guys! 👍

@Asal181 Год назад

I love his answer at the end. Excited, genuine, curious

@slippythefrog 2 года назад

I love that this rocket scientist nerd threw on his black jacket, leather pants and flashy belt buckle and just owned it and acted like himself. He rocked it.

@peterkotara 2 года назад

Don't forget those boots.

@Michael-ij6kg 2 года назад

And he based his company culture baseline from a video game. Awesome

@ikimihimiri633 2 года назад

@@Michael-ij6kg which game?

@toradoraization 2 года назад

@@ikimihimiri633 starcraft

@Tarvoskemwer 2 года назад

and he comes off as far more trustworthy than someone in a suit

@davetoms1 2 года назад

"You must construct additional Pylons" 14:38 ~ The world expert on 3D printing rocket hardware. Absolutely love it!

@Go.Shaman 2 года назад

i was looking for this comment. could we edit it with a timestamp? 14:38

@davetoms1 2 года назад

@@Go.Shaman done and done! :D

@Go.Shaman 2 года назад

@@davetoms1 thank you so much!

@reddaxtor5662 2 года назад

@VeroMithril Even I didn't get it. Can someone explain it please?

@annybodykila 2 года назад

Lmao i just posted the same comment and then found yours 😃

@katsauce Год назад

Today was the day that Relativity finally got their maiden launch. The mission was to gather data at Max-Q. GLHF made its liftoff tonight and performed all throughout Max-Q and stage separation, but the 2nd stage engine didn't stay lit. GGs

@conception3509 Год назад

It's great to see it all happen a year after I was introduced to this project by this very video.

@at0mly 2 года назад

I love that Scott's title is "Internet Rocket Scientist"

@vive335 2 года назад

Benis

@mdtanjirrahman2591 2 года назад

Ha ha... I thought that was weird in a funny way

@cuuh. 2 года назад

oh no scott is the irs get out before they take your tax money

@genXstream 2 года назад

I'm just happy see there's a Scottish guy named Scott Manley. Sounds like a trope or placeholder name for a Scottish action hero.

@outsider344 2 года назад

Listening to Derek and Scott talk is like hearing the quarter finals of a RU-vid "best voice" competition.

@desktopadonis5646 Год назад

I am a programmer for aerospace inspection. We are all watching this company. If they are successful it will push the whole world to additive manufacturing.

@skenzyme81 2 года назад

The StarCraft nerdery was DELIGHTFUL.

@user-fuk3b2is4z 2 года назад

I was gonna say lol

@dooki3face 2 года назад

build additional pylons

@hutlazzz 2 года назад

@@dooki3face not enough minerals

@johnlucas463 2 года назад

You Must Place that in a Power Field

@BenReynoldsDIY 2 года назад

additional pylons required

@maxidaho 2 года назад

"Do we have enough B-roll of me nodding my head?" "Yes, yes we do"

@BradenBest 2 года назад

(in Alan Rickman's voice) "Not hardly"

@bossmanviking 2 года назад

dont forget shaking it No

@naghanass2430 2 года назад

Funny! I was thinking the same thing

@herzogsbuick 2 года назад

you mean {nods head yes}

@Under_Sky_Third_Gaia 2 года назад

(nods)

@The_Crazy_Monkey75 Год назад

Another very interesting video by Veritasium, as always. I can't wait for the future of Relativity Space!

@PhazonBlaxor Год назад

Yes. They didn't launch it last year like they said, and they won't launch anything this year either. Very interesting video by Veritasium indeed.

@intljonez 2 года назад

The guy giving the tour just seems stoked on everything he’s talking about. Love it! Haha

@fasfan 2 года назад

Every now and then Derek brings something to RU-vid that just blows my mind. This is one of those times. There's so many little things here that just blows my mind. For example... I never would have considered what was stronger... traditional builds or 3D printed metal parts. Or that they have software that helps print a warped product so that it "warps" to straight. This is fascinating stuff.

@TheDavidlloydjones 2 года назад

Fasfan, One of the best comments here, imho: 'Course that's only because you agree with me... 😎. Seriously, I think you understood the video in a way that maybe 80++% of the people here didn't.

@veryconfused9768 2 года назад

I still can't believe it.i thought it was a clickbait

@nastyy.8582 2 года назад

can we talk about the materials team developing better suited alloys for this task..? thats insane alone. the anti-warp algorithm is bananas. as a mech. e. major I am drooling over this.

@nastyy.8582 2 года назад

@Rob Bannstrom great example, this is true

@fasfan 2 года назад

@Rob Bannstrom sure the idea has been around, but there's a little bit of a difference between a CD case injection molded in one piece and a freaking rocket part made 1mm at a time. Lol

@SeanHodgins 2 года назад

Seems like a pretty cool company. I love the idea of pre-stressed materials by taking advantage of warping metal while manufacturing.

@ringsystemmusic 2 года назад

Oh *god* you’re right that’s pre-stressed isn’t it? Brilliant accident!

@Platinum199 2 года назад

@@ringsystemmusic I wish I was a brilliant accident lol

@Relatablename 2 года назад

I'm really curious about how they got that working anyways. It would surely be helpful on regular FDMs, and it'd definitely reduce the incidence of failed prints. Maybe there's some kind of sensor keeping the nozzle a uniform distance from the material?

@skoolboy991 2 года назад

omg just realized this.. it’s truly perfect

@tragile9108 2 года назад

What does that mean?

@logtrimmer Год назад

I have been keeping up with the company and they had to attempts to launch the Terran 1 with another scheduled today. This is a great leap for proving what Additive manufacturing can do.

@WasatchWind Год назад

Good luck have fun on your first launch Relativity!

@LeoStaley 2 года назад

I absolutely love that everything at this company is named after Starcraft. "YOU MUST CONSTRUCT ADDITIONAL PYLONS"

@manojlds 2 года назад

Isn't pylon a common English word in this field? 🤔

@allmybasketsinoneegg 2 года назад

I was about to comment that in all caps, now I guess I don't have to.

@ghosthunter0950 2 года назад

@@manojlds the "You must construct additional pylons" is a well known Starcraft phrase. He was clearly referring to Starcraft there. but I think that Like you said, he probably said the phrase because it was called a Pylon in the first place and they have to build a lot of it.

@AtticusHimself 2 года назад

It was SOOOO CRINGE

@aegoni6176 2 года назад

*We have embraced the glory of battle!*

@TimeBucks 2 года назад

Cant wait to see how far they go.

@astitva5002 2 года назад

i can see them getting acquired

@yeahboyz9314 2 года назад

To infinity and beyond!!!

@Figo1042 2 года назад

@@astitva5002 I took that more literally than you did haha

@shrimppasta5544 2 года назад

@DONT stfu

@AlessAbreu 2 года назад

Do you mean in meters above the sea level?

@eve_squared 2 года назад

The program that they made is absolutely insane as a concept, I have no idea where I would even start if I had to make that.

@brendanmorgan5155 2 года назад

I got an interview request from Relativity and they literally linked this video in the email. Great video!

@shoemakerleve9 2 года назад

What team did you interview for?

@StormbringerMM 2 года назад

The software adjustment for warping is aweeesommmmmmeeee

@aleciacarpenter7856 2 года назад

Toedilly!

@imponent8 2 года назад

ohh yes love email

@spirosbaltsavias7961 2 года назад

Yees, warpensation ftw

@Fley1965 2 года назад

They have three patents for machine learning systems for improving the print quality. No heated build platform, no heating chamber. This is a gamechanger.

@jaybingham3711 2 года назад

I wonder if they accomplished that via insights from adaptive optics.

@TheHackysack 2 года назад

Love the StarCraft theme. "You must construct additional pylons." Love everything about it.

@noobzerg1990 2 года назад

I wonder if he actually plays the game? I mean he sounds passionate so I hope so. If he does I bet he plays T due to the rocket being called terran

@farmergiles1065 11 месяцев назад

So great to see the word "genius" in a video title and for it not to be hype! Great video that reveals the genius.

@jurockclimb 2 года назад

He sounds like a kid showing off all the toys in his bedroom. Clearly passionate about his company’s vision

@sololeveling7390 2 года назад

ikr? so wholesome

@streekaiz1955 2 года назад

@@sololeveling7390 What does ike mean

@mistakoruto 2 года назад

I liek that guy

@thesauce1682 2 года назад

That guy is ewasome

@lactobacillusshirotastrain8775 2 года назад

@@sololeveling7390 you shouldn't have edited the typo. ike = i made a typo deal with it. lmao

@avenuex3731 2 года назад

The cutaways to Derek when Scott is explaining stuff are quietly hilarious.

@EggBastion 2 года назад

That's one way to put it

@greenredblue 2 года назад

"Don't 'cross the line'? What in the world does that mean? I didn't even draw a line!"

@PopLadd 2 года назад

Didn't you say the same thing on one of his last videos? Or are people just that amused by such a mundane thing?

@whuzzzup 2 года назад

I'd put it more like: Unnecessary and utterly stupid.

@avenuex3731 2 года назад

@@PopLadd the second

@almaguapa-sailboatliveaboa440 2 года назад

Just amazing. 3D printing definitely reduces costs and accelerates delivery of end product.

@MrIndiemusic101 5 дней назад

Even if relativity space doesn't end up lasting these guys are certainly creating massive progress in pioneering new manufacturing techniques that will help with manufacturing in general not just rockets.

@jamief415 2 года назад

Tim seemed to handwave away the 5-10% extra weight due to roughness as if it were nothing, but from what I know of rockets (which is admittedly very little), conserving weight is the most important factor when building a rocket. Does the rocket get sanded down before use or are they just eating the extra fuel cost as a necessary consequence of using 3D printing tech?

@michaeltrew5504 2 года назад

Underrated comment here

@felipeaugusto6991 2 года назад

even if it is 10%, youd need 10 launches to lose a full other launch on cost, so it is not much, besides its a prototype, sanding it is not the way to go as you could oversand it and make it too weak, i think they seek to improve the 3d printing method to make it less rough, tackle the main thing, not the consequence, also if the whole rocket warps just a hair thickness distance from tip to bottom, thats already a win.

@Tenems941 2 года назад

@@felipeaugusto6991 well if they have the machine and file that they used to make the parts, then it seems really possible to have an attachment of sorts to the arm be a sander after the printing is complete. I don't know anything about robotics so, its very possible I'm dumb and so is this idea.

@williewarno 2 года назад

@@felipeaugusto6991 sanding can also be done automatically

@MoeStash012 2 года назад

Have to keep in mind that this is the bleeding edge of the technology. I have no doubt that if this becomes a viable solution that 10% will get engineered out just from commercial pressure.

@nobody4y 2 года назад

"you wouldn't download a car" Not till industrial 3D printing becomes home use

@lordomacron3719 2 года назад

the Replicators of Star Trek are a step closer each day, basicly 3-D printing at the atomic scale.

@aoeu256 2 года назад

Imagine having self-replicating printers... and after they double to 1000 after 10 generations of doubling, have them independently create "growable" solar collectors and and wind turbines to power themeselves to double even more and for our energy needs hmm

@Monkey-Epic 7 месяцев назад

Super cool stuff. Thanks for finding this. I had always thought 3D metal printing was a cool idea way before its time. Now a few years later, its time!

@Monkey-Epic 7 месяцев назад

You wont me back as a subscriber after the silly tungsten rod experiment. lol

@interstellar618 Год назад

What an awesome video!!! That young man is just beautifully intelligent and I'm soo grateful for his/their efforts to space flight/manufacturing and furthering the endeavor or our intrepid human condition.

@dillonbledsoe7680 2 года назад

Dude sounds like he's having a fabulous time building rockets

@coreyodell6220 2 года назад

It sounds like a literal child dream come true, especially with his passionate he seems about getting humanity out into space

@1KJRoberts 2 года назад

I love the Scott Manley cross-pollination of this segment. This is an inspiring video. Cool folks doing cool things.

@lithominium9955 2 года назад

and they also used a song from Kevin Macleode which was used in Kerbal Space Progam

@Ryeera Год назад

One and a half years later, and this rocket is 7 Minutes away from launching for the first time as I'm typing this comment. Go Terran 1, Go Relativity!

@mababymgamesyt5590 Год назад

delay kicks in**

@xsietube Год назад

“Relativity is scheduled for its second launch of Terran 1, called "GLHF" (Good Luck, Have Fun), from Launch Complex 16 in Cape Canaveral, Florida. Our launch window opens at 1300ET on March 11th, 2023. “

@xsietube Год назад

Second attempt was a no go. Third times the charm?

@fotmheki 2 года назад

Absolutely love it! Would be also very good if they will commercialize some 3D metal printer as well, lowering the cost. The only thing that bugs me is that adding 5% to 10% of the dry mass of a rocket as a huge implication on his capability as a launcher, hope they can come up with better engine to solve this!

@johnvonludd1738 Год назад

@eatyourvegetables1449 Год назад

@@johnvonludd1738 I don’t know why you keep copying and pasting this to comments that are irrelevant to yours lmao

@johnvonludd1738 Год назад

@Eat your Vegetables, how is it irrelevant? Dude absolutely loves it. I'm telling why it's stupid.

@eatyourvegetables1449 Год назад

@@johnvonludd1738 I just don’t know why you feel the need to keep copying and pasting it to every comment that exists on this video, like Jesus bro, you get fired from the team or something?

@johnvonludd1738 Год назад

@Eat your Vegetables tbh I don't know either and I too think it's not normal, I spend my time proving something to someone, but they will not probably even see it and even if they will there is no point in it. I have a little problem with arguing on the internet. But I try to fight it, I spend much less time writing pointless comments on the internet than a couple of years ago.

@xxManscapexx 2 года назад

Finally Derek/Manley crossover we always wanted.

@PTNLemay 2 года назад

Unexpected but pleasant surprise

@henanigans 2 года назад

Hullo, I'm Veritasium!

@dpmakestuff 2 года назад

here we are in the future. Love a Scott Manley cameo!

@realGBx64 2 года назад

Somehow the best rocket specialist Derek could get on a show is a software engineer who played a lot of Kerbal Space Program...

@jamespiskorz1154 2 года назад

fly safe friend

@qdsw 2 года назад

And its bright

@PAIP_Studio 2 года назад

This is idiotic...

@dpmakestuff 2 года назад

@@PAIP_Studio I just looked at the crap you upload and you have the audacity to insult anyone, anywhere… 😂😂😂🤡🤡🤡

@vvhh9578 2 месяца назад

Thanks for video on 3D printing rockets assembled

@camrynhunter6969 Год назад

Truly amazing. Cutting down construction time from 6 months to a couple weeks. Boi were evolving! God bless humanity

@skrounst 2 года назад

Seriously rooting for these guys. They seem like they are having as much fun as they are innovating space launches. Positive vibes!

@cjbrenner13 2 года назад

If you dont mind them burning up the earths oxygen while crying save the earth lmfao.

@kdog__ 2 года назад

@@cjbrenner13 I don't think you understand that rockets almost do nothing towards the environment because of the fuel used. Cars are worse and even planes. The hydrogen fuel is not actually bad.

@cjbrenner13 2 года назад

@@kdog__ it takes more energy to produce hydrogen than other fuel sources. If you have a theory, research it before you comment opinions. Burning anything - in massive quantities depletes O2 - thats just that way it works.

@youwantmyname9208 2 года назад

@@cjbrenner13 yet you're here, not in cars video which release about 4.5 metric ton of carbon dioxide

@jaxolotle 2 года назад

@@cjbrenner13 hey so there's plenty of ways to get all the fuel you need sustainably, just because its not being done now doesnt mean its not possible

@SnyzerTech 2 года назад

Derek: “How’d you solve the icing problem?….” Relativity space: “Icing problem?…..”

@jaibanna7724 2 года назад

😂😂😂

@NakedAvanger 2 года назад

imagine this discussion while making a cake

@sMASHsound 2 года назад

when was that?

@hamjudo 2 года назад

[Edit to add; whoosh, the cultural reference went right over my head. Either ignore the rest of my comment, or mock me gently. I can handle moderate amounts of shame.] -There isn't a significant- -problem with ice forming- -on an approximately cylindrical- -rocket. The ice simply falls off.- -Because of the shape,- -there isn't anything both important and fragile for it to hit.- -A stacked space shuttle- -did have critically important- -fragile tiles in the path of- -falling ice and insulation.-

@dontomaso11 2 года назад

@ i don´t get it either, care to explain? :|

@zombiekid2424 Год назад

I love how this guy is going with this imagine, smaller rockets to transport a small family and on top of that if we have a moon base we can make it a refueling station so that the trip to mars would be smoother and faster either way great work👍

@rotary65 2 года назад

Amazing. Faster, cheaper, better. I love how this is about a manufacturing paradigm shift. They're designing a next generation production system too.

@LateralTwitlerLT 2 года назад

"it just adds 5-10% extra weight" Isn't that quite a massive weight increase when we talk about rockets?

@benporter1997 2 года назад

Lol my thoughts exactly.

@labrinth999 2 года назад

That and "It doesn't add any air friction" didn't sit right with me...

@bestcreations4703 2 года назад

I was thinking the same thing however i would also say keep in mind they are more than likley referring to the weight of just the casing compared to a proper casing and a difference in 5% of that is very small when compared to the weight of the fuel which it holds but i do agree it is still a concern maybe the reduction in weight isnt worth the additional manufacturing required to go in and smooth out all of the surfaces

@MrKelsomatic 2 года назад

I had the same thought. My guess is that maybe there are weight savings in other parts of the rocket that make up for this difference or that there is post-print finishing done to reduce weight. Just guesses.

@mbgdemon 2 года назад

@@labrinth999 Roughness can actually improve air friction, this is why a golf ball has dimples rather than being smooth

@JoshStrunk 2 года назад

This guy and the StarCraft references has me in love with his company even more than just the thought of 3d printing models.

@Wizardboz Месяц назад

I was in ag in high school. We learned to weld, I remember him showing us jobs we could get with the skills he taught. One was just remaking gears and giant drill parts. We would slowly add layers remaking the worn out or rusted parts. We where basically 3D printing with pens. Except instead of plastic it was metal.

@Friedrich-Wilhelm-1980 2 года назад

can i just stop to say Scott Manly is fun to listen to ha is full of facts and genuinely excited

@TrueThanny 2 года назад

By far the most impressive bit for me is the reverse warping of the rocket body models. Anyone who's done 3D printing of "large" objects knows how difficult it is to make the result match the model due to warping. I wonder if they could generalize their software for different materials and scales. A lot of people doing small-scale 3D printing would love to have that kind of ability.

@MrMctastics 2 года назад

It's proprietary!

@TheMooseOnTheLeft 2 года назад

This kind of software is becoming standard for laser powder bed fusion (metals and plastics) and it exists for some other methods like the wire feed system shown in the video. Autodesk, Concept Laser, and a number of other companies and university research groups have independently developed this tech.

@MrEazyE357 2 года назад

Yeah, that amazed the hell out of me.

@korok2619 2 года назад

@@MrMctastics and that can change

@iain3713 2 года назад

For sure, metal is even worse than the plastics we're used to bc of the high temperature differentials and high expansion. It’s crazy that one section of the part is hundreds of degrees while another part is a bit over room temperature, you can only imagine the warping.

@kcharleyjk123 2 года назад

Love the founder vision and how passionate and optimistic he is about the whole process. Best of luck for his company!

@user-nf1bz3sn4z 2 года назад

U wanna play Russian roulette?

@CarbonRevo91 2 года назад

@@eabradley1108 definitely an odd duck. If he didn’t have a rocket factory behind him in these shots, I’d think he was blowing smoke about half of it. And maybe he is. Some of the things he said and tried explaining just didn’t come across right.

@vallorahn 2 года назад

Exactly, the nervousness and some vague stuff he said, exactly like a young Elon. He will be successful. To achieve the unimaginable, you have to believe in yourself even if you have to, but don't know all the answers to questions relevant to reach your goal.

@spookymanbearpig 2 года назад

@@CarbonRevo91 He said the unevenness of the surface adds "only 5-10% more weight" which is OK. Bruh, how in the world is 5-10% additional weight commercially acceptable? He just brushed it off as no biggie. LOL, that's not how it works!

@Sabrinahuskydog 2 года назад

@@spookymanbearpig We'll certainly find out if it works when he tries to launch it. I hope it's beamed publicly.

@isangedighidaniel6612 21 день назад

A pulse of concentrated heat changes a rod to a cylinder instantly. This is the holy grail of metal working.

@pcatful Год назад

!!!!! Woah. Another great video! Had no idea this sort of thing was happening.

@RKroese 2 года назад

That reverse warp design blows my mind man! THAT is sheer genius!

@samliong1446 2 года назад

@Jerome Samuel ??? Sheer is spelled correctly in the comment.

@NotOneToFly 2 года назад

It's an engineering joke! Shear stress is one of the things they're fighting with that design.

@iamnormal8648 2 года назад

where is it (timestamp)?

@CardinalTreehouse 2 года назад

@@iamnormal8648 5:18 or so

@Dec38105 2 года назад

@@samliong1446 ffs there's always one prick rattling on about spelling

@BrianTonerAndFriends 2 года назад

The mathematics around that 3D printing must be really something. It is amazing that they can account for the cooling of the structure as they print it. Awesome video, I really enjoyed.

@thomaswilson818 Год назад

Flat out, this is the way to go! Toys used to me made by hand and out of wood, then injection molding with plastic and sadly some really toxic metals were also used in injection molding for many uses in our culture. So now here we are in the moment seeing a big part of the future in mass production of space rockets and it is exactly where our technology should be as for our human species in our time line on this beautiful earth. Enjoy the ride while you can!