The Guide To EasySubli™ 

Thank you for the feedback! Rudy

@@SISERSRL with the cameo. Can ypu cut the vinyl horizontally

Hey Karen! Thank you for the kind words, I hope all is well! Rudy M.

Thank you for the feedback Debbie!

Hi Rosemary, hope all is well! Let us know how you like the new material :)

Hey Crafty Gal, with Sublimation, you are not able to print onto cotton or dark fabrics, which can be limiting to some. This is a vinyl which can be printed on with Sublimation inks (to achieve the vibrant colors), and can be applied to cotton and dark fabrics. Hope this information is helpful!

Hi Tasha! Great to hear from you! Hoping all is well :) Rudy M.

Hi! Hope you are well :) Rudy

Good Luck!

Thank you for the feedback! Let us know if you have any questions at all :)

Muchas gracias amigo! Espero que todos estan bien por alla! Un abrazo fuerte!

Hey Latonna, Thank you for the feedback, we look forward to your comparison video :)

he said 'between linen and cotton'

Yes!! I'm laughing so hard at this comment. He may have meant linen but he said "line-in". Bahahahaha

@@lovelymsL1 Lol! English is not my first language, there are certain words that still stomp me, looks like I found a new one! Either way, I hope you enjoyed the video :) Rudy

Hey Dennis, if the design is one piece, then yes, you only need the vinyl. If the design has multiple parts, like lettering, then you will also need the TTD Special mask, which will help you transfer the design from the carrier. Hope this helps!

I would like an answer to this also...

I was told that you shouldnt change inks but IF you do then you need to flush ALL of the old ink out....but was told that it can be risky and its not recommended.

Hi! You are going to have to help me out with this one! Lol Rudy M

Hey Roshanda, yes you can still use the Epson printers, it comes down to having the correct profile. Hope this helps!

Thank you for the feedback!

Hi Katrina! Hope you are well :)

Thank you for the feedback Jerri :)

Thank you for the feedback Michael. Unfortunately this would not work, as the Sublimation Inks print very dull colors... the true vibrancy comes out once you apply under a heat source. Hope this helps! Rudy

SISERSRL thanks

Hey Sammy, thank you very much for your feedback. Since we do not sell the machinery, our main focus in this video was to educate our customers on the how this new material works, and showing the process from start to finish. We understand the importance of cost analysis, and we can certainly think about doing such a video in the future, but for this particular one, we wanted to focus solely on the process. Hope this helps!

Hey Mark, it does not feel like our PU vinyl, I would say more towards a much thinner flock material. It also does have some stretchability to it, once the adhesive has crystallized. I am planning on doing a video that shows this key feature of the product. Hope this helps!

Hey Ashra, we have had customers who have been successful with the Epson printers. It really comes down to finding the correct color profile, based on the model and inks you are working with. Regarding the feel, it actually has a very soft feel, probably one of the most surprising aspects of the product to those who are working with it. Hope this helps!

Literally just tried it w/ my ET-2750 & it jammed up my printer, I only put 1 paper- jammed. Put a stack thinking that would be better, jammed. Said something like my printer head might be damaged now. DON'T DO IT!

Hey David! Great to hear from you, hope all is well! We have tested the material with great results, will last 50 washes with no problems. The hand is surprisingly very soft, and does have some stretch to it, after you let the adhesive crystallize. Hope this helps! Let us know if you have any questions at all! Rudy M.

@@SISERSRL Rudy I know you probably don't remember us( David and Angie from Florida the shaved ice people)but we met you back in the early days of TRW . Glad to see you are doing well ! I have herd this product is only available in England when is it coming to the US ?

​@@David-nn7vo and Angie! Of course I remember, it was always great seeing you guys at the shows and our open houses, I hope you both are doing well. Please say hello to Angie on my behalf :) Regarding the material, yes, as of right now, it is available in Europe and Asia, but it is coming to the States very very soon :)

Hey Maxim, yes it will work with other inks as well. Please send us an email to info@siser.it and we will be happy to further assist you :)

Hey I.W Mcfarlane, it actually has a very soft feel. Even though it is a bit thicker than our P.S Vinyl, the feel is much softer. Hope this helps!

@@SISERSRL Thanks a lot for answering my question. I will certainly give this new approach some thoughts!

@@HMcdon You are very welcome, have a great day!

Hey Pali, if your plotter has an optic eye, than the registrations can be done in your cutting program.

Hello Derek, yes, it will work with any Sublimation Printer. The quality will depend on the profile and inks used. Hope this helps.

Hey Rick, which cutter are you working with?

@@SISERSRL Silhouette Cameo version 1.

@@SISERSRL I have a picture of the issue if you guys can supply an email address to forward it. The regular paper cut fine, the Easy Subli is way off.

@@AirbrushingtipsNet Hye Rick, that would be great, you can send the image to info@siser.it thank you in advance!

@@SISERSRL Sent. I also sent it to support@siserna.com on Feb 4.

Buenos dias Hay, disculpa la demora. Si imprimes directo en el material, modo normal :)

SISERSRL SISERSRL gracias amigo un gran saludo apenas estoy empezando en esto y ya tengo todo voy empezar a comprar material en su website

@@haytvo7910 Saludos amigo, avisanos si tienes algunas dudas o preguntas, aqui estamos a sus servicios. un abrazo!

Hey atmany, thank you for the feedback. Some designs tend to print out more saturated, so we recommend to place under the heat press to cure the image quicker. In this case, the design printed out perfect, and we did not have to place under the press. Regarding the settings, we were between Cotton and Linen :)

Yes, this is a smooth, flat, white HTV you can sublimate on!

Hey S Sergeant, we printed two designs to simply utilize the full sheet. Regarding the Epson printers, we do have customer working with the converted printers, and have had much success. The challange is finding the right profile for the inks and printer you are working with. Cricut also works great with this process, here is a great blog our good friends at SiserNA created, explaining the proccess: www.siserna.com/easysubli-htv-cricut-air-and-easypress/

Hey S Sergeant, the Inks are only available for the Sawgrass SG series.

@@SISERSRL Might be a good idea to just sell 100ml bottles individually.

Thank you for the feedback Sabine :)

Hey Lula, yes it does have a soft hand after applying :)

Hi Latasha, the image is supposed to print on the dull side, not the shiny side :)

Hey Barbara, the EasySubli inks will yield the best results, but yes you can still use the Sublijet Inks. We recommend still using the same profile on VPM. Hope this helps!

Hey Tisha, yes it will still work with other inks as well, it just comes down to finding the correct profile for your printer :)

malmo54 let it dry under a open heat press for 30 seconds or dry with a blow dryer on low cool settings

Gregory Gauthier how long is the durability?

Hi Crafty Kelly, yes, here is a video I did a few weeks ago showing this process, using the Scan n Cut Feature: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TyJzFryQMnA.html Hope this helps!

Hello, you can still use the Sublijet Inks (we recommend to still use the EasySubli profile), but to optimize your results, we are recommending the full solution with the Siser Inks. Hope this helps! Rudy

Hey Serif, this is the information from the Sawgrass website: External dimensions (529 mm x 509 mm x 212.5 mm). You may contact Sawgrass for questions regarding the printer set up, as they have distributors worldwide: www.sawgrassink.com/ Hope this helps! Rudy

Hey Dan, they do not, Sawgrass and Epson are two different companies.

Yes they do.normal sub ink crappy product

Hi Jerri! I hope you are well! I have not tried to do this yet, but I know in Silhouette Studio you have the option to increase the cutting mat size to 12"X24" which would then allow you to cut up to this length. At this point you should be able to do a print and cut up to 11X17, assuming you are working with the SG 8000. Hope this helps!

@@SISERSRL it helps some Rudy except I have no idea how to set it up for the SG800. Can you guys maybe do a video on how to do this? There is nothing on YT or FB on this. Thanx lots for the info and getting back to me. Good to see you again! Happy Holidays. Jerri

Hola Uziel, si se puede, utilizando el perfil de EasySbuli en su VPM... Pero para los mejores resultados, recomendamos con las tintas EasySubli. Saludos!

@@SISERSRL in English please

@@ruthvillarreal8442 Hey Ruth, yes you can. You may use the EasySubli setting in the VPM software... but for the best results with the Sawgrass SG series printers, we recommend our new Siser EasySubli Inks. Hope this helps! Rudy

I agree with you, This appears to be simply a heat transfer vinyl that they are calling sublimation ??? sounds more like a name changer than a game changer ; )

Before its heat pressed the ink is sitting on the surface of the vinyl, once heat is applied the ink is sublimated into the vinyl and locked in. Big difference from inkjet printed transfers.

Hey Michael, since traditional sublimation can only be applied to a polyester based substrate, you cannot print directly onto cotton. Due to this limitation, we have engineered the new EasySubli Vinyl :)

Hello Monamittee, thank you for your feedback. With the Subliflock or Transfer Vinyl, the application still requires high temperature and time, which can damage or discolor the original garment. Also, you will notice with the Sublimation Flock, the finish result is not true vibrancy, which is expected from Sublimation. Due to the new engineering formula behind the EasySubli, we can print directly onto the vinyl, and apply at a very low temperature and time (150 degrees and 15 sec) with incredible vibrancy. There is no other sublimation formula on the market which can be applied at this time and temperature. This will not only save you time, which we know time is money, but also eliminate the possibility of damaging your garment. I hope this information is helpful. Have a nice day. Rudy

SISERSRL I called heatpress company and they said this is not vinyl and it’s paper. Is this true? Thanks

@@michaelc6553 Hey Michael, it is not a paper, it is a true heat transfer vinyl :)

@@michaelc6553 What you meant is the paper FOREVER has right? Sublimation no cut paper to cotton t-shirt... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hfzb6CEqiSc.html

Hi Karen, for more information, please send us an email at info@siser.it Thank you in advance.

Hey Alicia, you can also use other sublimation inks :)

It will work also with the standard Sawgrass ink, but the colors with standard sublimation ink will not be as vibrant as with the Sawgrass sub inks.

Will this work with toner sublimation

Hello, in this video we used the Silhouette Cameo :)

Yes it is, please send us an email to info@siser.it and we can send you distributor information.

Hey Kind Lumpy, you cannot add ciss as the SG series works with ink cartridges. For best quality results, it is recommended to use Sawgrass inks.

Do you sell bottles of ink instead of cartridges

@@kinglumpy8874 We do not :(

NO ANSWER ,WHAT A SERIOUS COMPANY DONT ANSWER A CUSTOMERS QUESTION ?

Hey Kristina, our apologies for the delay. Yes, you can use with paper as well if you would like to apply to other substrates. Hope this helps! :)

@@bulgarianinvestmentgroup9254 Please see answer below :)

Hey Amir, this is a vinyl for Sublimation, so you will need sublimation inks to work with this product. Hope this helps!

Hey LaTrese, the internal offset is a commonly used technique in Print and Cut, to eliminate having the white edges from the vinyl show. This gives us a nice clean finish. Hope this helps! Rudy

Hey Yanyan, yes it is allowed.

Hi Serentiy, as long as it has an optic eye, to cut registrations, any plotter will work :)

Hey Jennifer, it all depends on the size of the design, and the size sheet you are working with.

Hey Setiyo, to apply, yes. After washing, we recommend ironing from the inside. Hope this helps!

@@SISERSRL alright, when it will be available on indonesia :D

Hey Sue, please send us an email at info@siser.it with your location, and we can send you more information regarding this product, and where to purchase it. Thank you very much in advance. Rudy

Hello Dennis, our inks are not compatible with the Epson printers, but you can still use the Epson inks on this material :)

Thank you

@@freshMila You are very welcome!

Hey Dennis, since we do not sell direct, you can purchase the materials from one of our Authorized Distributors or Reseller. If you can tell me you location, I can better assist you. Thank you in advance! Rudy M.

Hey Brian, thank you for the feedback. Please note that the material comes in A4, A3, and rolls size. Can you please provide us with your location so that we can better assist you? Thank you in advance for your help.

I am in Las Vegas. Can you explain what A3 and A4 is? Thanks.

@@huntforhorsepower Hey Brian, our apologies for the delay. The sizing for the sheets is as follows: A3- 11.7"X16.5 and A4- 8.3"X11.7" Hope this helps!

Hey Michelle, you can purchase the vinyl from one of our Authorized Distributors or Resellers.

Hey Jose, yes you can :)

Hey Sharon, thank you for the feedback. There are already several types of Transfer Paper manufacturers on the market, that allow you to work with inkjet inks. Please note that these transfer papers do not have the same wash-ability, as other solutions on the market, like printable vinyl. Hope this helps :)

There are PRINTABLE HTV that work with regular printers I know because I use them

Buenos dias, Krismatt, con cual impresora estas trabajando? Muchas gracias antemano.

@@SISERSRL epson con tinta de sublimation

Hello, thank you for your question. You are correct, traditional sublimation is done by printing on a sublimation paper, which is then transferred to a light colored polyester substrate via gases at 200 degrees for 35-45 seconds. This is a brand new Heat Transfer Vinyl that we have engineered, which bypasses the use of Sublimation Paper. This allows us to now apply Sublimated designs onto Cotton, dark fabrics, and much more. Also, do to the new engineered composition of this new vinyl, we can actually apply our Sublimation designs at an incredibly low temperature and time, 155 degrees for 15 seconds. This allows those working with Sublimation, to eliminate most limitations of traditional Sublimation. Hope this helps! Rudy

@@SISERSRL ...thanks for your reply. It sounds to me, this is a hardware alleviating bypass. One Printer for all Garments, using Sublimation. It seems the Subli is basically using Sublimation Soft Media as it's base. It's basically no different than Printing on typical Transfer Paper. Accept you'll get a better print. I need to know if it's worth it for me (vinyl) to buy a $500 Printer, plus the extras... Is it?

@@GodKing666 yes, we are using this new media to bypass the limitations from traditional Sublimation, to give you more versatility and options to your customer, resulting in more sales. Whether it is worth it for you, that really comes down to your business plan and customer base. If your focus is personalizing, this solution along with Heat Transfer Vinyl could be a great option to offer your customers. Feel free to send me an email, and we can further explore whether or not this is the correct solution to help your business expand/grow. Thank you in advance for your time. Email: rodolfo.marrero@siser.it

Hey DK, yes, your cutter will need an optic eye to recognize the registration marks and cut the image printed. Hope this helps! Rudy

@@SISERSRL what exact model cutter in vid?...cameo 3?

@@SHOCKANDAWTV Yes, the cameo 3 :)

We have not tried with the Cricut as of yet, but I do believe there is a way to create the registration marks on the Cricut to use the "Print and Cut" feature. Hope this helps!

Yes , you can :) I use this paper whit mi cricut , works great

Hey Dan, thank you for your feedback. The actual advantage of the product is the ability to apply to cotton and dark fabrics, at a low temperature. As you may be aware, traditional sublimation only works on light colored polyester fabrics. This is a solution we have manufactured, for those in sublimation who wish to expand their offerings. Hope this helps!

Hey Dark, please send us an email to info@siser.it and we can provide you with the requested information. Have a nice day!