My Best Jerkbait Now Bigger, How to make a Wooden Jerkbait. #luremaking #lurefishing

A to Z Tutorial|Jerk Bait Glider Lure making Tutorial-Part Two

Оксана Самойлова - о скандале на «Выжить в Дубае», жизни с Джиганом, воспитании детей и бизнесе

أثاث مثمر DIY من الخشب والحنطة السوداء! 🍇

Украли ЛЕГЕНДАРНЫЙ МЕЧ "Дюрандаль" #shorts #шортс

Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House

The Jerk - Handmade Jerkbait

Подписаться 16 тыс.

Просмотров 148 тыс.

50% 1

Видео Поделиться Скачать Добавить в

This video covers all the steps involved in making your own homemade jerkbait in balsa. We start out with some pieces of balsa and end up with som beautiful lures that really catch northern pikes.
Download the sketch here: harreby.com/div/TheJerk.pdf
To see a bit about how well the lure work when fishing for northern pike please see this video: • Fishing for Brackish P...
If you understand danish you should consider watching the danish version of the video, that is in 2 parts and has a bit more details: • The Jerk - Hjemmelaved...
For a complete and very thorough tutorial on how to make balsa fishing lures, I advise you to visit Paul Adams youtube channel called the Handmade Fisherman and see the series in 6 parts starting with this one: • How To Make A Balsa Fi...
Materials needed:
- Balsa plate 8 mm
- Stainless steel wire 0,8-1 mm
- Round bar of lead 7 mm
- Wood glue
- Epoxy
- Paint
- 3D stick on eyes

Опубликовано:

22 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 216

@zampara81 8 лет назад

wow excellent work, very nice lures. Thank you for sharing your ideas and the sketch

@jamesallen2960 9 лет назад

Excellent video and extremely informative! Your lures look amazing!

@jackreeves3001 4 года назад

Thanks for sharing! Very inventive. Your design, it shows a lot of thought. Thanks again!

@alexanderplatinhair8867 8 лет назад

"Thank you" comes from Warsaw, PL. I'am happy, I found your tutorial. Your lures look fantastic.

@only_builds8819 6 лет назад

Nareszczie

@Daltonnb1 3 года назад

Z jakiego to materiału ?

@Exmilkman 7 лет назад

Wow!! I'm going to have a go at this, thank you for sharing this video!

@chrislockard7308 4 года назад

Thanks for making this video. Making my fist now. It looks great, used a foil tape for scales. Can’t wait to try it. Will be targeting musky at cave run lake in KY, USA.

@bigbassmann 9 лет назад

Great tutorial on your jerkbaits, I enjoyed it very much. The finished baits look fantastic.

@sherifahmed6446 7 лет назад

you are very thorough and explain things very well. I really love this channel! Thanks so much!!

@SplishSplashFishing 7 лет назад

You are welcome. My aim is to be helpfull for even complete beginners, so I guess I succeed on that

@KayakChris 8 лет назад

Beautiful work, very inspiring. Thank you for sharing.

@SplishSplashFishing 8 лет назад

+Kayak Chris Thanks Chris

@hawaiilife2367 7 лет назад

thanks bro.you make beautiful lures.i make some out of surf foam and works pretty good.just if a big fish bites the foam explodes into pieces.even with strong epoxys.

@SplishSplashFishing 7 лет назад

Consider switching to making lures in resin then. Those can really take a beating without breaking.

@theurbantrapper614 8 лет назад

Awesome tutorial! ... very well done! ... nice jerkbaits!

@smkgldb9112 9 лет назад

Great video from Ohio USA those lures will work great for small mouth bass

@G-man45444 7 лет назад

Very very good video!! I will make some of your style lures for big pike here in northern Saskatchewan Canada 👍🏼

@SplishSplashFishing 7 лет назад

Do that, and make sure to see some of my other movies, as there are many with focus on pike lures

@guidoandreoni3575 8 лет назад

Great work! Bravo!

@SplishSplashFishing 8 лет назад

+guido andreoni Thanks

@LBendandi 8 лет назад

Great work and very good video

@SplishSplashFishing 8 лет назад

+L Bendandi Thanks

@tundralaksamana584 5 лет назад

exelent teknic my friend...thanks so much...greating from Batam, indonesia

@SplishSplashFishing 5 лет назад

Thanks. Nice to hear feedback from so far away

@tundralaksamana584 5 лет назад

@@SplishSplashFishing haha me to my friend...greating from the summer place everyday .

@Cocofish1775 5 лет назад

Hello! I very much enjoy watching your tutorials and have learnt a great deal from them. Thank you tremendously for your dedication to lure making and for sharing your knowledge with the world. I do have a question to ask of you. Balsa wood is not available in my neck of the woods, do you have any recommendations on alternate wood types that I can use to substitute?

@SplishSplashFishing 5 лет назад

Thanks for the kind words. You can use almost any kind of wood. The advantage with balsa is that it is very light and easy to shape. If you havent tried, the look for shops that sell materials for model airplanes and ships. They use balsa for that. Otherwise pick any kind of wood thats available, and you will just have to adjust the amount of weight if you folow my plan. Good luck

@agentp5393 9 лет назад

Thanks, great tutorial best i've seen yet and i have watched a few! i'm thinking of making a pine GT popper so mine will be different but it's good to see how people make them. Pitty everything is so expensive in Australia.

@SplishSplashFishing 9 лет назад

+Daniel Kontor Hi daniel. Glad you liked my video. Not knowing much about GT i think that they will be able to damage even pine. You could consider even harder wood or to cast them in plastic (Polyurethane resin). that can really take some teeth without being damaged. Try to have a look at this movie: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kbCk_Mwertw.html Good luck with the project

@agentp5393 9 лет назад

thanks for replying! yes i agree but i don't have access to many tools now I no longer live with my parents and i thought pine is a good place to start! never used plastic before and i don't even know where i could get resin of any kind without selling a body part!

@SplishSplashFishing 9 лет назад

+Daniel Kontor He he - Dont think any baits are worth a body part. Use pine and take the scars on your bait as proof that it is working. They can easily be patched up with a few drops of epoxy.

@jasondaigle6887 7 лет назад

I would love to have one one thoes or a cupple of them u are very talented I injoyed watching this video u keep up the good work I hope to see more

@SplishSplashFishing 7 лет назад

Hi Jason. I have stopped selling the balsa version, after I stated making the plastic version (check The Plastic Jerk movie). The plastic Jerk has similar movement in the water but is much more durable. Catch me on facebook if you are interested.

@motoandy6839 8 лет назад

Beautiful!

@SplishSplashFishing 8 лет назад

+MotoAndy Thanks

@vantonetti1 8 лет назад

Great Video!

@fischercustombaits 9 лет назад

Great Job !

@antonio999us 9 лет назад

Hello Jorgen Greetings from Peru!!! ... I watched some of your videos and I like them a lot... you are very creative, tidy and organized...congratulations for your work...I like to do my own lures as well, I found it as a very passionate hobby. Here, it is very rare to find an angler who do its own lures... Would you please tell me what was that liquid that you mixed with the epoxy in your danish version???. Also you talked about the hardness of the epoxy you use, would you please give me a little more of details of what are you using? Thanks in advance and have a safe fishing...Antonio

@SplishSplashFishing 9 лет назад

Hi Antonio Thanks, i am happy that you like the video and that it has inspired you to do your own. I think that the hobby of doing your own fishing vary a lot from country to country. To me its is a hobby on its own. This liquid in the danish movie is alcohol, but i dont use that with the Envirorex epoxy as i seems to work fine without it. The full name of the EnviroTex epoxy is: "EnviroTex Lite Pour-On High Gloss Epoxy". You should be able to find that on the net. Hope this was helpfull Jorgen

@iii-fi3et 8 лет назад

very nice

@61diemai 9 лет назад

Very interesting tutorial , thanks for displaying your admittably little uncommon jerkbait making method . ........and I'm really fond of the simplicity of your lure rotator , .......greetings from northern Germany , 61diemai

@SplishSplashFishing 9 лет назад

61diemai Thanks - Im very font of the KISS methology ( Keep It Simple Stupid). Dont make anything more advanced than needed

@61diemai 9 лет назад

Splish Splash KISS method , .....haha , that's funny, .......I don't even use a lure rotator , but fast curing epoxy , that won't drip . Keep up the good work , ....greetings , Dieter

@goovaerg 8 лет назад

Hi Jorgen. KISS methology? Are You an IT-guy? :)

@SplishSplashFishing 8 лет назад

+Glenn Goovaerts Yes Glenn - Nice spotted :)

@goovaerg 8 лет назад

I'm an it consultant to so... :)

@gshunting 6 лет назад

Hi..was wondering where you get your stencils for the mackerel lines and scales ..great vid thanks

@SplishSplashFishing 6 лет назад

Hi Gavin. I make all stencils by myself. Quite easy - just find a piece of plastic a cut the desired pattern into it. I will be makeing a "luremaking Hour" live cast soon, and I will try to go through stencilmaking in that. Maybe even making some downloadable prints you can use to make your own. Regarding scale printing, I think you should watch this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZolHhjl3tMo.html

@MegaFlyinggoose 6 лет назад

Brilliant video the details on how to make them and and the photography is excellent, i have subscribed keep the video's coming ; one question is will we ever see you lures on sale i think they would do very well. Mike from the UK

@SplishSplashFishing 6 лет назад

Mike Bailey check me out on facebook. There is often lures for sale

@maxj1151 8 лет назад

Félicitations de la France ! :)

@jaimangeruncordonbleue6 5 лет назад

La Mème mais préfère ceux de brubru is fishings

@bogdanRules 7 лет назад

very impressive. I can't find those micro bubbles in my country. You think it will work if I substitute it with some styrofoam powder? What kind of epoxy do you use for topcoat ?

@SplishSplashFishing 7 лет назад

Make a test with the styrofoam before pouring into a mould. It might react with the resin. For epoxy I use Envirotex Lite.

@crobinson3128 8 лет назад

these would be killer for striped bass

@thatdude1079 8 лет назад

THANK YOU I HAD THE SAME IDEA

@ubb4me 8 лет назад

Very impressive results. It would kill me if I spent all that time making one of these and I lost it.

@SplishSplashFishing 8 лет назад

Sure its a pain, but also an incredible feeling to catch on your own lure. However you could go for a plastic lure in stead: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kbCk_Mwertw.html

@spartt4360 4 года назад

Wow, that's amazing.. I'm really considering getting all stuff and try it myself. My only consideration- what is lure's finish weight? As I'm fishing on light rod 2-10g casting weight it looks quite heavy for me. Do you do smaller jerk lures at all? Or do you know where I would be able to get drawing for a smaller one? Believe making all myself by existing small lure and get it right could be a nightmare

@SplishSplashFishing 4 года назад

You should definately make you r own lures. This lure ends up at 35 g but you can make smaller and other type. Just check out some of the other movies in the channel

@SuperRossy81 9 лет назад

Hello Jorgen from sunny Stockhom!Great video sir, I am very new to the lure building scene but since I live not too far from you I could ask where you buy your certain materials, namely the "Pour on epoxy" and the straight wire to make the internal wire form as well as the lead weights. I have everything else but these three items are eluding me. Please help!

@SplishSplashFishing 9 лет назад

+Ross Seward Hi Ross. I purchased the pour on Epoxy on E-Bay from UK, but i know there are shops in Sweden that sells an product like it under the brand C&W Lure Epoxy. The wire comes from www.bleigussformen.de, but you can use stainless welding wire as well. I make my own lead weights with lead from a company the purchases and recycle old metal. Locate one of those a see if they have some. Hope this was helpfull. /Jorgen

@SuperRossy81 9 лет назад

+Splish Splash Tack se mycket Jorgen! I will have a look into this.

@antonio999us 9 лет назад

Jorgen, one more question... what kind of knife did you use to carve the holes for the lead??? it was very sharped ... I thought it could be some kind of scalpel...

@SplishSplashFishing 9 лет назад

Hi Yes it is a scalpel, but you should be able to use any sharp knife with a thin blade. Jorgen

@WATTSROBIN 7 лет назад

hi, i'm just wondering what cameras you use. i could see a gopro, but what type were the others. fantastic video by the way and the lures look brilliant.

@SplishSplashFishing 7 лет назад

Hi Robin. The GoPros are both Hero 3 Black, and the last camera is a "cheap" Sony videocam capable of recording HD (1080p) I don't remember the model, but it is nothing fanzy

@darrelldaniels9436 7 лет назад

awesome

@laboiteduweb9698 8 лет назад

Hello can you say me where to find stencil for a great finish like you? Sorry for my english i'm french....

@SplishSplashFishing 8 лет назад

+Remi M Hi Remi. I make all my own stencils. If you want to try the one in this movie, check out this movie: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QN6G6bE-Pw8.html In the text bellow that movie you will find a link to download a copy of my stencil. By the way - Your english is fine. Good luck with your lures

@scottbeebe3348 8 лет назад

do you have a template for the Wiring part for the jig ? Thanks!

@SplishSplashFishing 8 лет назад

+Scott Beebe Hi Scott. If you download the sketch from the link in the text to the movie there is a part showing the wire. Cut that one out and place it on a piece of wood. Drill holes through each turning point, and put a pin of approx 3 mm i each hole. Then you have a rig to bend the wire. Hope that is understandable. Good luck

@goovaerg 8 лет назад

Hello Jorgen. Very nice lures. Congrats. Where do you get the lure holders for airbrushing your lures?Greetz,Glenn

@SplishSplashFishing 8 лет назад

+Glenn Goovaerts Hi Glenn. The holders are bought in the local hardware store. They are known as a "third hand" and are used for soldering. I found this version on DealExtreeme, and they ship all over the world: www.dx.com/p/helping-third-hand-soldering-stand-w-5x-magnifying-glass-107293#.VidHPX7hBaQ

@durvalfazerganho2924 8 лет назад

Olá, sou do Brasil e tenho assistido os seus Vídeos, que vem me inspirando bastante, pois gosto demais da pesca e com suas dicas, vou com certeza fazer as minhas Iscas artificiais e poupar um bom dinheiro, pois aqui no Brasil são bastante caras, se tiverem a qualidade e o carinho de quem as Produziu, parabéns pelo seu excelente trabalho e obrigado por repassar seus conhecimentos. Um Abraço.

@SplishSplashFishing 8 лет назад

Hi Durval. I don't speak portuguese, but Google translate helped me. I am very glad you like my videos and I hope you will make some great baits. Good luck

@durvalfazerganho2924 8 лет назад

Olá de novo, fiquei feliz por ter respondido, tambem conheço muito pouco o Inglês, mas o Google tradutor, tem sido uma mão na roda. Você ganhou um amigo e fã do Brasil, continue o seu excelente trabalho com essa beleza de simplicidade. Um abraço.

@hannestornkvist2628 5 лет назад

Really Great videos! Ive just started making ny own jerkbaits, similar to urs but slightly bigger. I wonder if there is any specific formula to calculate how much weight i should use? Very thankful for ur answer. /hannes

@SplishSplashFishing 5 лет назад

I don't think that there is an easier way than putting them in water and see how much they can carry. Especially with wood there are too many variables to make an useable formula. Even the same type of wod has different density, and with cutting and sanding the bait will have slightly different size each time

@hannestornkvist2628 5 лет назад

@@SplishSplashFishing okay, sorry for asking so silly questions but should i put on o layer with epoxy before i put the wood in water? Im using balsa...

@SplishSplashFishing 5 лет назад

@@hannestornkvist2628 Not a stupid question at all. Yes it would be a good idea to seal the wood before you drop them in water. The wood won't be damaged, but will have to dry a while before you can paint it. Mayby you can find a varnis that dries a bit quicker than epoxy for that layer

@dylanprice2765 9 лет назад

I was wondering do you need a air brush compressor for the air brush thanks

@SplishSplashFishing 9 лет назад

Dylan Price Hi Dylan. Generally you need compressed air to use an airbrush. Normally this involves a compressor, but there are some airbrush sets that uses compressed air from a can. However in then long run, a small compressor is preferable, and you can get beginner sets that are not that expensive.

@come_cycle_with_mecome_cyc1284 7 лет назад

Thank you for this great tutorial! I browsed through the comments to see if someone else asked this already but could not find it... Which size hooks do you use with this jerkbait? Thank you in advance!

@SplishSplashFishing 7 лет назад

For this lure I use the Owner ST36BC size 1. That is an excellent hook with a very sharp point that easily penetrate the pikes jaw. It is also very light, so if I used at heavier hook, I would probably have to adjust the weight, if I wanted it to be "just floating"

@come_cycle_with_mecome_cyc1284 7 лет назад

Splish Splash thank you for your quick answer! I appreciate it. All the best from the Netherlands..

@zilzuman 6 лет назад

Thanks.

@Exmilkman 2 года назад

Hi I know it's an old vide I had this pdf years ago and have misplaced it. The link doesn't work is it possible for you to put a link up again please for the jerk pdf. Thanks

@jorgenharreby 2 года назад

Please check the link again. It works from my PC

@andru6403 8 лет назад

Hey man that's a great video, I did my own lure but i don't know why swim invert, i mean with the belly up, how can i correct that?

@SplishSplashFishing 8 лет назад

+Andres Moreno Hi Andres. You must have misplaced the weights somehow. The weights should always be bellow the middle of the lure. The closer to the bottom, the more stable the lure will bee. I like mine to be able to tilt a bit when I jerk, so the are placed a bit up. In your case they must be above the "floating center" of the lure, thus making it go belly up. If you are at the state where you put it in water, it is not easy to rearrange the weights. So I'm sad to say, that you'll probably have to start over. Good luck.

@andru6403 8 лет назад

+Splish Splash ... thanks a lot!, i'll try it again and i'll put the weights near of the bottom, and well i think i'm gonna start again with your templates, in my lures i use 4 lead balls with 3 gms each one, it's ok that weight?... i'll let you know how any news haha and of course i have to say that you're welcome to fish in the beatifull beaches of the venezuelan caribbean, regards!

@SplishSplashFishing 8 лет назад

+Andres Moreno .. If you follow my sketch, and make the lure the same size, you will need more weight. The point where the bait becomes sinking is 25-26 gram. Good luck with the project

@michaelbrabham6437 4 года назад

Fantastic video. You're very talented. The weights that you've added, are they around 40g? I know it says 7mm but wondering on the weight. Many thanks

@SplishSplashFishing 4 года назад

I dont remember precisely how much, but the lure weighs around 35 g, so I guess its around 25 g weight added

@michaelbrabham6437 4 года назад

@@SplishSplashFishing thank you very much. I've made two. One with 26g and one at 30g. Thank you very much for your reply and brilliant content. Keep up the good work!

@jakobchristensen6931 4 года назад

Fed video!! Hvor for du dit bly fra?

@SplishSplashFishing 4 года назад

Det letteste er at finde en produkthandel i nærheden. Der kan man typisk købe "brugt" bly, tin, skriftmetal osv. som kan støbes om.

@davidmiller2388 3 года назад

Can I ask where you got the lead bar from?

@SplishSplashFishing 3 года назад

I cast those myself in a plaster mold. It's a bit of work, but once its made you can quickly cast a bunch of bars.

@julianasencion8408 3 года назад

Wow!!

@Predator-Angler.Denmark Год назад

wauuu et flot arbejde

@jeroenbrandsma285 7 лет назад

How does these lures keep up when catching big pike? Balsa wood is quit soft, does the lure get easy damaged when the pike bite them?

@SplishSplashFishing 7 лет назад

The lures will take some damage along the way, but I usually just give them a drop of 5 min epoxy, and then they are ready again. The brown one on this picture has caught 50+ pikes and still lives on: scontent.xx.fbcdn.net/v/t31.0-8/15039631_1341667742550581_5836728614612862383_o.jpg?oh=073523948bb5bcb341832edd1957a9f6&oe=58F2C6A2 The brown and green on this picture is balsa, and the others are plastic (resin). If you want harder baits, you should consider making them in plastic. Start by watchng this movie: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kbCk_Mwertw.html

@jeroenbrandsma285 7 лет назад

Alright, looking good! How much do your lures weight? I’ve build an example lure which was around 45 grams and it was floating when dropped one the water but dived when jerked. I use Sapiupira wood (little brother of mahogany) so for that lure I used around 10 grams of weight. The wood is quit hard.

@SplishSplashFishing 7 лет назад

The Jerk is just bellow 40 g when floating

@xmtowntyx 4 года назад

Where do you buys your balsa wood from

@SplishSplashFishing 4 года назад

Shops that sell items for model planes usually has it. Try searching for "Balsa Plates"

@strandfishing9786 8 лет назад

Hej - Fantastisk guide, efter et par års geddefiskeri nu er det vist tid til at lave mine egne jerkbaits og tailbaits, det eneste jeg mangler svar på er hvad træet hedder på dansk, også hvor man køber en air brush og hvordan den lige fungere? Har du evt. link? På forhånd tak for svar :)

@SplishSplashFishing 8 лет назад

Ja da se at komme i gang - Det giver virkelig en fantastisk vinkel til dit fiskeri. Træet jeg bruger i denne film er balsa - Det kan man købe i mange modelfly forretninger. Bare søg på balsatræ eller balsa plade i google. Airbrush kommer i mange varianter lige fra de billige fra feks BilTema til de helt dyre. Jeg kan anbefale airbrushshop danmark, der har alt til airbrush og er super til levering og kundeservice. Der findes utrolig mange giudes til airbrush maling på youtube - prøv at se nogle forskellige, så får du en ide om hvordan det gøres

@strandfishing9786 8 лет назад

Fedt, tusinde tak for svar!

@Mister1658 8 лет назад

How did you make those lead bars? Or did you buy them? I can't find 7mm lead bars online..

@SplishSplashFishing 8 лет назад

I casted those myself i a plaster mould, but I think you could even use a "wood mould". Place two pieces of fairly hard wook up against each other i a vice. Drill a 7 mm hole along the gathering. Leaving half a hole in each piece of wood. A mould like that will work for a few castings

@Mister1658 8 лет назад

+Splish Splash Ok, thanks for your answer.

@abdoabdou9039 6 лет назад

Good job thune you

@Fernando-uo4nq 5 лет назад

u are the best

@Fernando-uo4nq 5 лет назад

can i use the brand Amazing Clear cast ? easy to get it in my country. thankyou.

@SplishSplashFishing 5 лет назад

Thanks - I try :D

@Just_Enni 8 лет назад

Very nice Video, want to start making my own lures after watching your videos!! Can you tell me the name of your holding device for the painting-job in your plastic-tub??? Greetings from Germany! I added you on facebook

@SplishSplashFishing 8 лет назад

+Enrico Laase You should - Its great fun, and nothing beats catching fish on your own lure. The device is called a "third hand" and is used for soldering.If you can't find locally, the you will find plenty through google

@Just_Enni 8 лет назад

+Splish Splash Thank you!!! I found it :)

@jimhorton1039 8 лет назад

what thickness for the balsa do you use?

@SplishSplashFishing 8 лет назад

+Chris Horton baseball Hi Chris - The balsa used in this movie was 8 mm ~ approx 1/3 inch

@ChainsawSquirrel 8 лет назад

using other wood such as white cedar, or other non sappy ( as in pine ) soft woods native to your region, would allow you to make a more neutral buoyancy bait "slow sink" without using a lot of weight that would reduce the action of those want to make that type of jerk bait.. just a thought :)

@SplishSplashFishing 8 лет назад

I'm aware the harder and heavier wood would have some advantages, but also disadvantages. The bait would be much more durable and need less weight added. On the other hand they would be harder to shape, and with the balsa the posibility to place most of the lureweight very low in the bait, will make the bait very stable vertically. If you want your bait to have a lot of "bellyflash" the last would be a disadvantage. I guess in the end it depends on what bait you are making.

@ChainsawSquirrel 8 лет назад

True, and Im fishing for Bass mainly .. dont have pike in my area.. do have some musky not far from here .. pike do want things a little different than bass or musky .. but bass sure do like jerk baits :)

@mariuslavignebie-olsen6552 8 лет назад

Hej hvor køber du din epoxy i små bøtter/flasker er stor fan af dine jerks så vil prøve at lave dem selv:)

@SplishSplashFishing 8 лет назад

+marius bie-olsen Hej Marius. Jeg køber det selv på nettet. Jeg plejer at købe her: www.amazon.co.uk/Envirotex-Lite-Pour-On-Sealing-Bottlecaps%20/dp/B005E2OU5U/ref=sr_1_1?ie=UTF8&qid=1400669720&sr=8-1&keywords=envirotex+lite Men hvis du synes det er for stor en potion, så søg efter Envirotex Lite på Amazon, det fås i mange andre størrelser. Vær opmærksom på at 1oz = ca 27 gram Held og lykke med at lave dem

@mariuslavignebie-olsen6552 8 лет назад

+Splish Splash mange tak:)

@thatdude1079 8 лет назад

+Splish Splash is it ok if I sell these

@thatdude1079 8 лет назад

+That Dude do I send you money or what

@SplishSplashFishing 8 лет назад

If you mean that you have made you own lures based on this tutorial and want to sell them, then sure go ahead. The lure isn't copyrighted in any way. But I would love to see your lures, so please find me on facebook and send me some pictures: facebook.com/splishsplashfishing/

@c.m.m.3293 4 года назад

Love your techniques. How about to make a "diver"? Everybody is just making gliders. But also divers are great for pike-fishing. Like the Suick or other classics.

@SplishSplashFishing 4 года назад

I don't have much experience with that type, but it sure could be a fun project

@c.m.m.3293 4 года назад

@@SplishSplashFishing I think that divers are more catchy than gliders. And more easy to build. Try one! Watch this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TIQgqXZTNw8.html

@simonetrazzi4733 8 лет назад

Hi SplishSplash! Could you say me the final weight of this jerk?

@SplishSplashFishing 8 лет назад

just around 40 g depending on how high it is floating

@Batuhankaygan976 4 года назад

When I made 3d eyes from the epoxy, I am using epoxy but after some time, it turns to pale and lose glossiness. What is the reason for this?. Using your advises, after hot stamping my jigs, I coated my jigs one layer of epoxy, now, I can apply zebra glow stripes easily, thanks by the way. Another question is about glow pigment paint, how can I spray this paint? What kind of binder must I use, am I use a thinner? There is no information about this in internet. And the last question, during buying epoxy what kind of epoxy we must select?

@SplishSplashFishing 4 года назад

Hi Batuhan. There are many different qualities of epoxy, and they age differently. Try different ones to find one that stays the same over time. About glow pigment, I do not have much experience with that, but you should use something that is a very fine powder. Also make sure that you airbrush has a fairly large nozzle size - like 0,5 mm. I would mix it with some sort of clear coat. I buy my epoxy from Easy Composites in UK - Top quality i think. Good luck

@Batuhankaygan976 4 года назад

Thanks@@SplishSplashFishing very clear explanation. I am keep going following you. You are one of the best

@lasseo66 8 лет назад

hej hvorfor skaffer du balsa træ henne med venlig hilsen lasse

@SplishSplashFishing 8 лет назад

Hej Lasse. Du kan finde balsa i de fleste hobby forretninger der sælger modelfly. Prøv at søg efter balsaplade i google og find en butik i nærheden. Hvis ikke det lykkes for dig, så skriv igen, så kan jeg finde et link til dig. Vh Jørgen

@sebastianmazur8938 8 лет назад

Hey Good work What do you use for surface coating ? Sebastian

@SplishSplashFishing 8 лет назад

+Sebastian Mazur Hey. I use Envirotex Lite epoxy, which gives a nice thick coating.

@sebastianmazur8938 8 лет назад

+Splish SplashTanks Thank you How many layers you need?

@SplishSplashFishing 8 лет назад

+Sebastian Mazur - For Pikes normally around 5-6 layers including the 2 before the painting

@sebastianmazur8938 8 лет назад

A lot of these layers Thank you for your answer

@johnnydavis7261 8 лет назад

how thick is the balsa wood?

@SplishSplashFishing 8 лет назад

+johnny davis The balsa plates in this movie is 8 mm ~ 1/3 inch

@jeppequist5070 9 лет назад

hey rigtig god video kan man købe det der ten eller hvad det er nogle steder? hope you are danish :D

@SplishSplashFishing 9 лет назад

Jeppe Quist Ja jeg er dansk Jeppe :D Tænker du på det jeg bruger som vægt?

@jeppequist5070 9 лет назад

ja undskyld tænker om man ikke kan få det færdigt og hva metal er det du bruger?

@jeppequist5070 9 лет назад

GODT! :) ja jeg tænker på det du bruger som vægt og hva metal det er... jeg er virkelig klar på at lave mine egne efter at have set din video! vil den blive for tung med alm træ?

@SplishSplashFishing 9 лет назад

Jeppe Quist Hej Jeppe. Man kan bruge hvidmetal, bly eller andet metal med den samme vægt. Dog fylder bly og hvismetal klart mindst i kroppen. Du kan købe det i en produkthandel (Et sted der køber og sælger gammelt metal) og du kan smelte det på et almindelilgt gasblus. Du kan godt bruge almindeligt træ, men det er noget sværere at forme, hvilket nok gør at det ikke er det letteste at starte med. Balsatræ kan man købe i hobbyforretninger, og det koster faktisk ikke det vilde. Super at du vil lave dine egne - Det er jo det det hele handler om

@jasondaigle6887 7 лет назад

hey good deal i will thank you

@endia007 8 лет назад

Hi, do you sell any of your lures?

@SplishSplashFishing 8 лет назад

+Ibrahim Al-Dabagh Hi Ibrahim. I dont have a real production going on, but I do sell a few lures now and then. But I can say right away that my prices can't compede with those of mass produced lures. If you are still interested, then catch me on facebook - facebook.com/splishsplashfishing/

@periklisphoenix6521 5 лет назад

please again , the type of the wood and diameters , how i ask it (amazing video)

@SplishSplashFishing 5 лет назад

There is a description of materials used in the text bellow the movie

@periklisphoenix6521 5 лет назад

I saw a lot of videos around, but you make it look so easy :) . I will want to make " atherina hepsetus " as i live in greece and now the last years we have a lot of "trompet" fishes here

@SplishSplashFishing 5 лет назад

@@periklisphoenix6521 You could also have a look at the movie about the Penceel (My pencil lure)- The Sand Smelt looks a bit like that

@aleksandarmakivic8843 4 года назад

Where is the water action of this lure?

@SplishSplashFishing 4 года назад

This lure has a nice s movement even with even retrieve, but it is also very jerkable

@hawaiilife2367 7 лет назад

what type of wood is that.

@SplishSplashFishing 7 лет назад

Its balsa that is very easy to carve, but you can use other if you adjust the weights

@logansavage1258 8 лет назад

What size treble hooks do you use?

@SplishSplashFishing 8 лет назад

My favourite for this lure is Owner ST36BC in size 1.

@logansavage1258 8 лет назад

+Splish Splash ok thanks I'm trying to make my own jerk baits!

@SplishSplashFishing 8 лет назад

Nice - Feel free to upload pictures of them to my facebook page at facebook.com/splishsplashfishing/ I love to see viewers projects which I in some small way have inspired to

@rickardandreasson9924 4 года назад

Hur mycket väger varje bly del?

@SplishSplashFishing 4 года назад

ca 24 g - Der er et link til tegning med vægte i teksten under filmen

@slavnatik 9 лет назад

Thank you!

@andersandersen6049 2 года назад

Hvilket træ bruger du til disse underværker

@SplishSplashFishing 2 года назад

Det er balsatræ - Meget blødt, men super let at arbejde med.

@joestinof 8 лет назад

Doesn't the "wooddust" get into you're pc's?

@SplishSplashFishing 8 лет назад

+joestinof Probably, but I usually go outside when I sand the balsa lures. The light dust just goes everywhere :P

@dylanprice2765 9 лет назад

Hi could you reply all the materials asap please

@SplishSplashFishing 9 лет назад

Dylan Price Hi Dylan. I have added a list of materials to the text below the movie, as I thought it would be something others might ask.

@caseyjtovey 8 лет назад

This is in regards to all of your lures. How do you determine how much weight to add to a lure to get it to float properly, suspend properly, or sink properly? I have tried several different equations, and cant seem to find a good equation to determine this. I have come close but not sure if the weight is going to fit. Here is my example: Lure weight - 15g Lure Volume - 30ml or 30cc equation weight divided by volume (15/30 =.50g/cc) the weight of water is 1g/cc so currently the lure weighs half as much as the water. so it will float. This means i will need 50g/cc of weight to make it neutrally buoyant. adding 50g of weight is WAY too much. This does not work. the weight required to make it float just at the surface is about 14.9g. I found this out by hanging a string with weights from the bottom of the lure. I want to know if you have a better way of doing this. Thanks again Paul!

@SplishSplashFishing 8 лет назад

+caseyjtovey Hi caseyjtovey I think You have got the formula wrong. You should not divide the weight with the volume. If you want a weightless lure in water, it should have the same weight as the volume of water it displaces. In your example it should weight 30 g like 30 ml of water. Total lureweight of less than 30 g will make it float - Like you discovered 15+14,9 = 29,9 is floating

@EatnLunch 6 лет назад

Hello, I have a series on my channel called "What to watch Wednesdays" where I feature a playlist of videos from other youtubers who I have either learned from, been inspired by, or entertained by. This week's topic is all about hand crafted baits and lures. Would you mind if I add this video to this week's playlist? Thanks for the great videos, amazing stuff!

@SplishSplashFishing 6 лет назад

Hi EatnLunch - For some reason you comment had ended up in the group to be reviewed, and I had missed it. Sorry about that. Guess I missed that week about crafted baits, but if you want to put it in you playlist another time, feel free to do so.

@EatnLunch 6 лет назад

Hey no problem. I'll just go ahead and add it to the existing playlist, thanks!

@donak1982 8 лет назад

Nice video and awesome work. The Links in your bio doesn´t match.

@SplishSplashFishing 8 лет назад

+donak1982 Sorry I forgot to fix those when my website was closed. I will reply to this once they are fixed, or you can send me your email, and I will mail them to you

@donak1982 8 лет назад

+Splish Splash That would be nice. Could you send me your stencils,too? May i have your email adress?

@SplishSplashFishing 8 лет назад

+donak1982 The links are active again. If you want to write to me regarding something else, use facebook: facebook.com/splishsplashfishing/

@pikefisher1000 9 лет назад

Hi I am a pike Fisher man from Ireland can you send me some off your lures love your work

@SplishSplashFishing 9 лет назад

pikefisher1000 Hi PikeFisher - From time to time I have sold some of my Jerks, but I am unable to compeed with the prices of mass-produced lures. In fact the price will be something like £15-20 + shipping. If this doesnt scare you, just return, and we can discuss further details. Regards Jorgen

@paulconnors2258 8 лет назад

can I purchase one of these lures from you ??

@SplishSplashFishing 8 лет назад

+Paul Connors I dont do many "The Jerk" in balsa anymore as it is a bit easier to make the plastic version. However I think i have a blank or two, so I could make one for you. However you have to be aware that my prices are not competitive with mass produced lures

@paulconnors2258 8 лет назад

+Splish Splash I don't mind paying for quality I live in Ireland so how would I pay ?? and a tiger perch pattern would be perfect 👍👍

@SplishSplashFishing 8 лет назад

+Paul Connors Could you catch me on facebook (facebook.com/splishsplashfishing/) or leave your email, then we can arrange the details

@_Riese_ 8 лет назад

Video simply great! Baits made great! It is like what you are doing. Thanks for your works. Is it possible to your e-mail address, which would write to you personally? Thanks again for the excellent work and video.

@SplishSplashFishing 8 лет назад

+Виталий Малиш Thanks - Just drop me a message on my facebook page - That is the easiest way: facebook.com/splishsplashfishing/

@_Riese_ 8 лет назад

Splish Splash Great! Now there is an opportunity to write to you personally. Thank you.

@ZalmonHD 8 лет назад

Are you from Denmark, fordi det er jeg, syntes nemlig at du lyder lidt dansk :-)

@SplishSplashFishing 8 лет назад

+ZalmonHD Ca. så meget fra Danmark som man kan være :P

@ZalmonHD 8 лет назад

fedt, syntes nemlig godt jeg kunne høre det :-)

@ChainsawSquirrel 8 лет назад

I use a dremel and a drum sander .. lil messier but I cant cut my self lol

@SplishSplashFishing 8 лет назад

With balsa that is very soft you have to be very careful when using a dremel.

@ChainsawSquirrel 8 лет назад

I make balsa baits .. I shape with dremel all the time :)

@SplishSplashFishing 8 лет назад

You must have a steady hand ;-) I expect it can remove a lot of material in no time

@ChainsawSquirrel 8 лет назад

I use a dremel flex shaft, allows very precise control .. if using just reg dremel would be very hard to do :)

@SplishSplashFishing 8 лет назад

Actually think I have a flex shaft to my dremel - Just havn't used yet. Maybe I should try

@mrfeta5548 3 года назад

ok ai like and ai luck more veeerykood sory my english

@rickpablo7118 8 лет назад

if only i got a dime for every time he said "ehhh".................

@SplishSplashFishing 8 лет назад

You would be a rich man. I am well away of it, and has really been strugling with that in all my later movies :-)

@saintathiest1606 7 лет назад

great video! music? sucks!

@kielanito 3 года назад

Reklama za reklamą jakiś kurwa dramat.

Далее

My Best Jerkbait Now Bigger, How to make a Wooden Jerkbait. #luremaking #lurefishing

17:03

My Best Jerkbait Now Bigger, How to make a Wooden Jerkbait. #luremaking #lurefishing

Просмотров 14 тыс.

A to Z Tutorial|Jerk Bait Glider Lure making Tutorial-Part Two

10:51

A to Z Tutorial|Jerk Bait Glider Lure making Tutorial-Part Two

Просмотров 10 тыс.

Оксана Самойлова - о скандале на «Выжить в Дубае», жизни с Джиганом, воспитании детей и бизнесе

1:21:27

Оксана Самойлова - о скандале на «Выжить в Дубае», жизни с Джиганом, воспитании детей и бизнесе

Просмотров 115 тыс.

أثاث مثمر DIY من الخشب والحنطة السوداء! 🍇

00:55

أثاث مثمر DIY من الخشب والحنطة السوداء! 🍇

Просмотров 1,5 млн

Украли ЛЕГЕНДАРНЫЙ МЕЧ "Дюрандаль" #shorts #шортс

00:47

Украли ЛЕГЕНДАРНЫЙ МЕЧ "Дюрандаль" #shorts #шортс

Просмотров 378 тыс.

Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House

00:18

Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House

Просмотров 17 млн

The Big Shad SwimBait | Finishing and Testing

15:00

The Big Shad SwimBait | Finishing and Testing

Просмотров 136 тыс.

A to Z Tutorial -Jerk Bait Glider Lure making Tutorial part 3

12:06

A to Z Tutorial -Jerk Bait Glider Lure making Tutorial part 3

Просмотров 7 тыс.

90% Of Anglers Don't Know How To Fish A Jerkbait! Learn To Master It With These Retrieves!

10:57

90% Of Anglers Don't Know How To Fish A Jerkbait! Learn To Master It With These Retrieves!

Просмотров 127 тыс.

The Plastic Jerk - Easy, durable and catchy

36:36

The Plastic Jerk - Easy, durable and catchy

Просмотров 119 тыс.

Lure Making Bling Bling Pike Jerkbait From Scrap Pallet Wood - Part 1

10:03

Lure Making Bling Bling Pike Jerkbait From Scrap Pallet Wood - Part 1

Просмотров 4,5 тыс.

Making a fishing lure from a broom handle (the Surreal eel)

11:11

Making a fishing lure from a broom handle (the Surreal eel)

Просмотров 147 тыс.

NÄIN TEHDÄÄN JERKKI KYLMÄÄN VETEEN

10:12

NÄIN TEHDÄÄN JERKKI KYLMÄÄN VETEEN

Просмотров 25 тыс.

FACTORY TOUR - SUICK MUSKY LURES (For Muskie and Pike Fishing)

14:39

FACTORY TOUR - SUICK MUSKY LURES (For Muskie and Pike Fishing)

Просмотров 8 тыс.

An Epic WhipWad

26:00

An Epic WhipWad

Просмотров 159 тыс.

Making a Jerkbait with a rattle, How to make a suspending Jerkbait lure #lurefishing #bassfishing

26:24

Making a Jerkbait with a rattle, How to make a suspending Jerkbait lure #lurefishing #bassfishing

Просмотров 10 тыс.

Оксана Самойлова - о скандале на «Выжить в Дубае», жизни с Джиганом, воспитании детей и бизнесе

1:21:27

Оксана Самойлова - о скандале на «Выжить в Дубае», жизни с Джиганом, воспитании детей и бизнесе

Просмотров 115 тыс.