The knife SHARPENING jig II 

My jig arrived to Dallas, TX ten days after placing an order. The quality of the jig is superb. Craftsmanship is outstanding. Put it to a test sharpening my chef knife and the results knocked my socks off. There is no way I could have achieved the same results sharpening by hand . Great tool and thank you Mr. Kadlec.

zatím nejlepší tip na vlastní výrobu, perfektní provedení, motivoval jste mě

You have created quite a nice sharpening jig. I'm impressed. Thank you for showing us how you created it.

Great - I especially loved the cup of coffee bit!

Got my sharpening jig roughly 2 weeks after purchasing and now use it since a few weeks and I'm happy that I bought it. Thanks Michal for this great tool and the fast delivery

I'm totally impressed!

It's a large version of the Lansky sharpener, very nice work.

I made something similar for my use about 35 years ago.. but you have made something that made me go... oh heck! why didn't I think of that way!.. well done my friend.. well done indeed

jig delivered today and straight tryed ...never had such a sharpest knife as now.5 Stars .well done dear Michal.

I am amazed you still have all your fingers!

Got it as a Christmas gift for my mum. Works super well, especially with larger knifes one achieves incredibly precise results. I recommend to start with a stretched bar and work with the stone towards the knife as you move along the edge. So basically push the stone in the direction of the knife. It is also shown in the video. This prevents the stone from being damaged by the plade as there's more control when the tip of the blade is reached. Also it is necessary to check and readjust the angle after the first stroke. Begin with a slightly larger angle then after the first stroke have a very close look at the blade and lower the angle. Repeat until it is perfect.

Got the jig delivered to Australia with no problems. Fantastic product and waaaay better than some of the more expensive sharpening jigs i have bought. I especially like the fact that you can use full size sharpening stones (just make sure you use similar thickness stones tho). Gives you fantastic razor sharp knives.

Excellent system well done 10/10👍🏻

Beautiful job Michael you make such wonderful products.

I will be in touch, looks awesome!

Хороший станочек. Талантливый человек, талантлив во всем. Лайк! 👍

The magic box is great! :-)

excellent job making this jig.

Najlepszy ze wszystkich pomysłów.

Just got it today! Amazing job Michal!

¡¡BRAVO!! FÁCIL Y SIMPLE, MUY BIEN AMIGO.

EXCELLENT JOB!!!!

amazing . well done!

Just got mine today. Wife’s making me use it for her scissors first before I can use it on my stuff. Looks beautiful, very smooth action love it.

Отличная работа,аккуратно всё!,молодец.👍

That’s impressive, well done, excellent,

Amazing tool, nice looking to. Well done.....

Hola me gusto mucho tu video saludos cordiales. Daniel

¡¡BRAVO!! FÁCIL Y SIMPLE.

the guy sells the jig yet never tells you how much it is or where to get it. incredible.

great job my friend.....i keep an eye on you.....there is evrytime something interesting on your channel.....keep doing like that man....greating from italy

Thank-You for sharing,very nice detailed video! you did`nt spend 20mins telling us, how you got started!

Супер Точилка!!! Браво!

A great vidoe Mr. Kalec, I might purchase a few of them in the future for my shop! :)

Super sehr gute Arbeit!!!

It doesn't get any better than this.

I love this vid awesome no one better than

Really good job

Dear Michael Thank you very much for yours videos. Please if its possible, show us your workstation and yours machines in a next video. I´m amanzing for the quality of yours devices.

The thing I really like about this jig is that it uses stones instead of sandpaper …👌

Молодец! Браво!

Stone holder if it fails, Stone might be broken.. " But Big Thumbs Up" love your project. Great build Sir

excelente trabajo,te felicito

Muy buen vídeo. Gracias y un saludo

So satisfying

Ist's a *great* piece of workmanship Michal !👌 If You're willing to listen to my advice: If You slit the holes of the "jizzle-like"clamp- that fixates the blade/knife to the wodden block ist's easier to fixate broader blades. It would also be nice if You grind a square 40x20x10mm deep into the wodden block to hold the blade with an N52 neodym magnet the same size. The advance of the more narrow whetstones, which originally came with Apex are just about 20mm wide, so You're able to sharpen koncave internal rounded blades like karambits or hand-scissels. Also is a smaller wooden stone-holder-block lighter and easier to move with less weight esp. on curved knive tips =>less pressure to the edge and tip of the blade. The quality of Your product is *way better* than the Chinese or even Lansky ones 👌👍🙋 I'd *love* if You're improving Your product to *all sizes* => width => of whetstones 20 - 100mm=> needs to slim the wooden stone-holder-block to 25mm and a carved in 60° phase into the middle of the steel stone-brackets .😉

The price is EUR135 for the jig, it is delivered with the 1000/3000 stone. The rocommend combination: Knife sharpener - 135 2000/5000 stone - 50 Leather block with paste - 23 -------------------------------------------- Total EUR EUR 208 plus shipping cost (Europe EUR - 20, USA, CAN, ASIA, AUSTARALIA, Malaysia ... EUR 65)

this thing is so satisfying

Muy buen vídeo!

Nice craftsmanship and beautiful design. I was looking for something like this because I still want to use my old stones. Do you think the stone holder would lose stability if one would build a frame for the stone which would hold the stone on the sides? So that you could just flip the stoneholder around instead of removing the stone and reattaching it for using the other side?

Good Job Dude! This Tool rocks every Knife.... ✌️

O aparelho está muito bem feito e o Sr deve ter mesmo muita confiança pois arriscou colocar o dedo bem à frente do formão (?). Com a quantidade de ferramentas que possui, mal parecia que fizesse má figura.

Не ну огонь, весь сточенный металл на пол летит. Ух молодца.

Quiero uno 👍. Muy buen trabajo

Nice!

Have used your jig for several years. It's really good. I fall down on the sharpening technique - like Which stone will give me a burr? How much to use every stone? How many stones in a sharpening set? What's the angle for sharpening scissors?

Great video and your jig looks fabulous. I have a nice sharpening system now, but nothing quite like this. One day I hope to purchase one from you.

I recommed a linear bearing on the shaft to reduce friction

Hi Michal, congratulations to a fantastic Product. May I as what is the smallest angle you can adjust on your jig ? Also, which dimensions (length) of the stone fits to your jig ? Best regards from Sweden.

Super!!!!!!!!!!!!!!!!!!!!!!

Hi Mate. I have sent you an e-mail. Awesome work !!

good job

You get my respect - VYBORNE JE TO. It is much over my ambition. greetings :)

Hi my friend, how can I make one of those magic, coffee making boxes??? But seriously I love this video, great production quality as well as very informative. Please let me know if you ever decided to sell one of those jigs, I would love to have one and there is no way I can make one. Thank u and keep it up

Hi michal, very nice product. Can you advise the height from the from the jig when all is mounted? Thanks

Great!

Wow... 😮👍

Good. Ty.

I am very interested in this jig! Do you ship to the U.S. and how much does it cost? Also, what does the jig come with? Excellent video!

Well hella bells I'd rather pay you than some wicked edge big company... look like I'll be getting a early Christmas present lol thank you sir

What kind of oil do you use for the leather strop? Great job. Thanks

Do you sale the build plans? Nice job ,earlier I got bugged from pointless noise but like your finish Thanks and thumbs up

جميل جدا سلمت يداك

love it hahaha

So i only need $2,000 worth of equipment to sharpen my $20 knife... doh ! I am kidding... enjoyed every minute of it.

Wow

Hola amigo buen trabajo.q medidas tiene el afilador q fabricaste.saludos man.

Your work is very beautiful, professional and professional, but can I ask you for a request? I want the name of the application that I use on your mobile phone in the size of the semicircle to determine the required degree. Thank you

Hi mate, what is the smallest angle that can sharpen?

Dobrý den, systém Jig II je i k prodeji? Pokud ano, kolik tento systém vyjde a kde lze objednat. Děkuji za odpověď

Hola, saludos desde Argentina, muy bueno el dispositivo que hiciste, deseo hacer uno igual, pero yo usaría lijas de distintos granos, que es mas económico que las piedras, podrás pasarme un croquis con distintas medidas del dispositivo ?? muchas gracias

Hi Michal, I'm living in France and would like to order your knife sharpener with two waterstones and leather block with paste.Please, can you tell me what is the brand (and model) of waterstones and leather paste sold with the jig ? Thanks !

what's the best angle to sharpening the knife?

Top

Why are the scissor angle so different?

Parece que hicieron él vídeo más, para mostrar las herramientas que para mostrar la fabricación del afilador

With this variant of sharpening, the main advantage of large water stones is lost, this is work on suspension.

My biggest problem with this setup is the constant impression that the stone may not be attached firm enough, then seeing it falling and breaking in 100 pieces. Otherwise it's awesome to not depend on expensive specific size stones anymore.

Tell me the length of the board on which the knife is attached?

Very cool design. How much for just the jig? I already have the stones that I need.

Very Nice. I world live to but One of your super tool. How much It cost ? thanks

Very good job Michal, can you send me information on how to order one of this?

Very nice! How much does it cost?

Hi Michal! great videos and great handywork! Will the jig work to sharpen a 10 to 12 inches long knives? And if you ship to Puerto Rico?

Verry nice jig. But what is the price in Euro or Dollars

Hi Michal, Nice magic coffe maker and zinc box :-) How did you assembly the steel rod with wood part on jig holder ? Greetings from Poland :-)!

Nice job, how much this sharpner??

Se pueden afilar tijeras de peluqueria de esta manera?

Michael I want to buy one! Tell me how much in American dollars $ and how and when can I??

You could spring load that stone holder, so you don't have to unscrew and screw in the handle each time. ? 😀