The Lightest MTB: Just 6.5 KG!!!: UNNO Rockshox SID 1x12 Shimano XTR  

Go easy on the grease buddy, your gonna make that bike weigh an extra half gram.

No pedals - no medals ! :)

I actually was riding my bike in Austria a few weeks ago up a gravel climb to around 1900 meters above sea level and met a guy who had such a mountainbike. It was the brand of a former mtb world champ who now builds these fancy ass bikes. With pedals and bottle cage it weighed just 6.8 kg, absolute madness

I did not believe at first, and then listed. I am impressed. Frame Unno aora = 690g Fork Sid = 1315g Seatpost Tune = 200g Stem Tune = 120g Saddle Tune = 105g Handlbar ~ 120g Wheelset ~ 1000g Tire Continental pair ~ 910g Crank E13= 345g Chain ring ~ 60g Brake rotor Hope pair = 160g Brake xtr pair = 395g Shifter Xtr = 117g Rear derailleurr Xtr = 222g Casette Xtr = 363g Chain Xtr = 242g Botombraket and headset and other ~ 150g Grips @esi ~ 50g Total = 6564g+tube+bolt+rear axel

Here I am riding my 23kg dh bike everyday. I think if I rode a bike this light I'd fly away like E.T.!

Life becoming easy for bike thief’s 😌

These are almost road tires though if you base on continental's site claimed scores based on terrains. I reckon it's closer to 7kg if you put on proper XC tires. But this is still very impressive.

I don't think it's great for the stem bolts to tighten one first then the other, should they not be evenly tightened? Same goes with the handlebar clamp and rotor bolts with the power drill! Then the cassette, not even making sure the lockring was straight before cranking it down. Very hard to watch I must say from a bike mechanic point of view.

Guys, he's not using an impact driver. He's using a clutched drill which is set to a very low number, so it's barely putting through any torque once the bolts are in. He also has what looks like a star bit on there so cam-outs are extremely low chance and he isn't going to strip any threads with the clutch set so low. He probably torqued it manually and then went back and fourth with the drill adjusting the clutch until it put fourth a good amount to get the bolt in there but not fully tightened. I do the same thing with my RC car - I know that a 5 on my Makita cordless will get my wheel nuts as snug as I would do with a wrench.

I like how you attach one disc rotor carefully to torque and the other one just winging it with the clutched screwdriver :) Also, I didn't see you put in any hydraulic fluid, so either that wasn't filmed because it's boring or you didn't do it yet in which case add another 200g to that weight total.

Komponentler özel marka Tune harika olmuş unno kadroyu Tr toplanacağı hiç aklıma gelmezdi iyi olmuş sid maşayı anlatmaya gerek yok pompalı tüfek misali conti speedking 27.5 şu an kullanıyorum yol bisikleti lastikleri kadar akıcı ve konforlu bir o kadar yakışıklı bir lastiktir aynakol keşke Shimano veya race face Next SL olsaydı frenler beton gibi tutuyor Shimano fren konusunda tartışmasız en iyisidir diğer markalarda hep sorun yaşadım bisiklet kısaca süper ama benim şu an imkanım olsa Scott scale sl veya Sworks epic ht varken unno almazdım tercih meselesi

Dk 45 oyuncu değişlikliği 🤗

Nice bike. With those tires and not being tubeless, I’d stick to the gravel roads, ;)

İyi ki varsın Caner ❤️

In case it's not lite enough already, titanium cranks and fox step-cut Factory team issue fork would make it even lighter.

EKipmanlar ve ürünler müthiş. Tabii işçilik de :)👌👌🏼

I have a 7kg road bike, and I get scared I'm gonna break something every time I cross railroad tracks. Not sure I'd be willing to ride this in the woods.

I’ve one Aora and is an awesome bike, the best bike I’ve ever ride. Made and handcrafted in Spain, only 50 bikes per year, per model, the best components and the best engineer

Nice video. Also good, that you exposed yourself to new ideas in these comments.

лучшее видео по сборке ещё и с таким прекрасным музыкальным сопровождением

Incredible... And there's still a few weight savings to be made.

Them: we have the lightest mtb only 6,5 kg Dangerholm : 6,25kg

Wow 😯! Thanks for the Mtb video, i saw it for the first time.

Valla tr de unno göreceğimi düşünmezdim companentlerde tune olunca tadından yenmiyor. Xtr sette candır. Sram setleride çok severim ama derdi çok bakımı zor anlayan adam bulmak zor kronik sorunları var. Ama shimano öylemi candır can. Bir sram level tl fren setim vardı, dot yağından dolayı süreki sıcak havalarda piston şişiriyor çok uğraştırıcıydı. Shimano deore xt set aldım gençleştim resmen bu kadar mı farkeder :D

Cassette bolt got striped by not running a few treads by hand first. Grease is always good, specially for the next guy to service it. But the cassette bolt part is mind boggling on such a project.

meu sonho de consumo ter uma bike dessas show de bola 🤩🤩🤩

I don't often say this and don't want to be condescending, but with components like these please use your torque wrench carefully! You're not holding it right (your forearm should be perpendicular to the wrench to get an accurate torque reading) and you're fully torqueing the first bolt before you even tighten the others! Instead, you should gradually tighten each bolt (say 2Nm, then 3Nm, then the final torque), otherwise you may put a pressure point on the bars (which can fracture the carbon) and leave it undertightened once the others are done (if you try tightening it again the first bolt won't click the wrench, when the 4th will). Don't get me wrong this is a beautiful bike build, I'm just saying this before you learn the hard way as I have before! Edit: not to mention the cordless drill!!! Have fun stripping the hub threads and bolt heads

This video was extremely calming and satisfying! beautiful bike and video!

Please can you include a parts list breakdown for this build, I’d like to create something like this myself one day.

Elinize sağlık çok iyi bisiklet iyi iş👍👍👍

Wow!!! but only in my dream🤩

Now that is one pretty bike. LOL, 20 years ago I would have given a body part to own that beautiful machine. And now at 40 suspension and comfort are a little more important.. But still that is a work of art. Great video man. 👍👍👍

7:40 that slap had me rollin

Essentially a gravel bike. Especially with those tires. Now that Rockshox introduced front forks specifically designed for gravel bikes I feel like this bike and modern gravel bikes are becoming one. The big difference of course being the drop bars. This bike is made for those light XC trails.

super! ...that means a real mountain bike - congratulations!

Very nice, I’ll take two please!!! Unfortunately I’ll break it the first time I take it out mountain bike riding.

I had the passion of building a light MTB about 3 years ago and I achieved an 8kg bike, pedals included. Weighting a bike without pedals is bullshit, just like the manufacturer's declared weights of many bike parts. This clip would be really useful if it would list each part and it's weight and price

Nice bike but I think I’ll stick with full suspension, pedals and a dropper seat for just under 10kg

Nice build bro, awesome 👍

you know what works really well for spreading an even layer of grease... a small paint brush.

10 parmağında 128 marifet var kardeşimin :) Sahne de Caner Sağcan ...

Would you add component list to the description? Thanks!

I really like the stealth bike with the loud fork.

Light and nimble bike! Pure ride!

Easy to do 6.5 with pedals. I love that Aora frame, it has many details. But the rotor discs ... Ai2 cheap and light, the crank set, the brakes i would chage for the lightest disc brakes: TR¡CKSTUFF piccola. Tires ... that are not for XC use. Fork ... I like it because works fine so for me it is OK as the wheel set. Screws in Ti or alu. and some more details like Darimo or Gemini stem, handlebar and seat post. That will give enough room for pedals, better tires and it would be 6.5 again or even less.

oooo caner beylerde burdaymış naysooo

oyuncu değişikliği güzel olmuş☺️

It can be lighter. Replace all bolts for titanium and aluminium. Replace cables from 1.2mm to 1mm. Cut cables, remove paint and coat, drill some parts of groupset, maybe will be better to use sram groupset. You can use their x-dome technology cassette. Xd hubnut lighter. So I think its possible to remove 500 grams from bike. Its very presumptuously call this bike lightest.

Ficou linda essa bicicleta, deu vontade de pedalar, uma bicicleta com esses componentes aqui no Brasil custa mais caro que um carro, pode acreditar.

Amazing 👍👏

Отличный байк получился!

Dream job Hayta. :)

Now drop into any trail other than a gravel road and watch it explode on the first decent.

Amazing!

With a dropper post and more aggressive tread it’s the perfect trail hardtail

Beautiful build. The Unno HT is a beauty but you can buy the Epic HT for half the price and it's lighter.

This guy: Say “torque to spec” Me “UGGIE DUGGIES!!!”

Это прям какая-то медитация!

Nice ASMR. Hasn't been my experience with wrenching bikes but hey 😂

I want a single speed rim brake 26” version, with pedals. Also those tires are just good rim protectors.

Going 1x11 with a e13 9-46t cassette and smaller front chain ring would shave even More weight, while saving money as well 🤷🏻‍♂️

Lighter than my fixed gear 😍😍

Awesome build appreciate.

hope someday had a workshop like you, sir.

You can use trickstuff piccola brakes and ashima ai2 rotors, garbaruk cassette

Hayatabike: we have the lightest bike @6.5kg me with a 15kg hardtail: 👁👄👁

Loads of fun downhill I bet...

Bravooo Maestroo

eline sağlık

Koşun koşun millet Ömer hayta Mtb topluyor..!!!

Wi-fi pedals? 😂 Great job bro 👍🏽👏🏽

How has that ethirteen crank been holding up? I'm thinking about getting it for my gravel bike.

This double torque wrench clicking drives me insane 😀 The torque only "clicks" correctly when reaching it from a constant tightening motion, not from standstill

Did one rotor by hand… then said FTS and grabbed the drill for the other.

Congrats for 1 million wievs

wow i like them wow..Maybe someday thats my dreambike

Them tires can’t do anymore than ride light dirt and no pedals or bottle cage :/ so it would be more like 7.5-8 KG but very nice build

Nice build but the tyre lettering not being aligned with the rim lettering is sending my OCD haywire!

what is that pink grease to put shock and handle bar? Thank you

Ke relajante es ver este tipo de videos ,para uno ke le facina meter las manos

Nefis bisiklet allah sahibine bagislasin.

What if it's just 8x1 or 6x1 I will just become lighter

Круть ! 👍🏻💪🏻👏🏻😁

Perfect ASMR video: Heavy dude assembles lightweight bike

Unno'nun kadroları HA Rİ KA allah sahibine bağışlasın ne diyelim

I thought the cable for the M9100 needs a u-turn in order to tighten it.

increible. como una de carretera .dios mio que buena

Wow dream build

Something feels fishy hear. There is no way that is 6.5 kg bike. Without pedals it must have at least 200-300g more, perhaps even as much as 7kg (depending on the tolerances).🤔

I’ve made my bike lighter by making it airtight and filling it full of helium. It now weighs 4kg

He didn't put an end cap on the gear cable outer into the rear mech? Also why mix Allen rotor bolts on rear but Torx bolts on front?

Since you can leave parts off my avg scoot full suspended weighs less at 4.6 kg. I did remove the wheels and crankset, but it is about as useful as a bike without pedals.

Should have at least installed some bar end caps, very dangerous.

Most of the parts are same as mine but it still weights 12 kg Or 10 kg

did he change gloves evrytime he puts on grease before holding the frame,rim,b lever,hand grip? etc..

That's insanely light!

Is the cable housing cap missing on the RD?

Bike build vids on RU-vid are like Tarantino movies. They’d be twice as good if they were half as long.

Vay be Türkiyede UNNO göreceğim aklıma gelmezdi. Marka ilk instagram hesabını açtığında keşfette denk gelip takip etmeye başlamıştım ve yıllardır bütün gelişimlerini ve argelerini takip ediyordum taaki ürünler satılacak kıvama gelip fiyatları açıklanana kadar:( o günden beri sadece hayallerimizde kendisi

Is this the new sid ultimate (none SL)? Why is it not milled out?