THE LOSI MINI-B | HOW TO INSTALL TLR314001 & TLR314002 SWAY BARS 

Honestly a great video/presentation. But as with the rear you guys mentioned you need the rear sway bar mount, correct me if I’m wrong but you need the V2 aluminum camber block up front which I think you forgot to mention. Also just my 2 cents, make em 280$ and include aluminum shocks that we can tune and change fluids. These plastic shocks are flat, wrinkly booty. Besides that I’m wildly obsessed with the mini B hahahaha

Ok here's what they're not telling you. 1: If you have an early model mini b, you probably need a rear diff cover to make this work. If you don't have two empty screw holes in the back between the axles, you need more parts. 2. The sway bar sets aren't the only parts you need. You need 4 part packs in total to install the sway bars on any mini b. Possibly a fifth, the rear diff cover. TLR314001 Front Sway Bars TLR314002 Rear Sway Bars TLR314003 Front Camber Block TLR314004 Rear Sway Bar Cover

Very nice vid. Thanks for sharing 👊

What’s the front wing model number

Thank you sir.

Will you offer a smaller pinion ? Is it a 3mm shaft but what pitch and tooth is it stock ?

The b set fits the t ?

Which mini B is this model? Mine doesn’t have those 2 holes below the back tower where you installed the aluminum where the rear sway bar goes zzz

I have the pro roller and there is no groove anywhere and nowhere to put the screws.?

You need to get rid of the music and when you’re showing the pieces especially the tiny ones you need to zoom in some more so we can actually see the piece not your fingers

Will these work on the losi mini T or is it just for the B

Why does your rear have mounting holes for the rear sway bar? Mine doesn’t

Plz Losi release a TLR tuned Tenacity TT Pro ……Plzzzzzz!!!!!