The Lowest Controller Delay 

Thank you for explaining everything, from install process to also uninstalling in case we encounter problems, thank you!

what you are measuring on the joystik is not the input lag, but the runtime ... there is technically no input delay per se on the joystik, the input delay is generated by the processing, which converts the signal, which is more important on the controllers which process the linear signal to transform it in exponential. to measure the input delay, on the joystick, take into account the dead zone and visually check the x and y axes, measure the response time of the joystick on a well-defined inclination, example 1 ° to measure, the input delay of the controller on the buttons (excluding Hall effect sensor of the xbox controller) either with a basic LED assembly, or with a sound recording on audacity, filmed at 1000hz in your way of proceeding, the type of joysitk, will give you results that cannot be used, if you do not set a clear protcole of tilt, because there are joystik with angles of 38 ° and 45 °, in addition to the height of the stick will also change given value,

Looks like I’m getting a dual sense controller lol. I’ve been using this overclock method and DS4 windows with a DualShock4 for about a year now, consistent reading of 0.5ms and a total night and day difference in game, especially the joystick feel. I also run Ds4 windows as a task, not a program, not sure if that matters. Nonetheless thank you so much for all of your help in the videos you post. You are a legend. Is there any way I can donate to you?

Thanks again fr33thy, been messing around with controller on cod lately. Perfect timing :D

In DS4 you created the profile, but didn't set it as the used profile. Could that be the reason you had to use the other one?

I haven't touched a controller for years but I was going to pickup one to play a couple single-player games and here you are delivering another informative video. Thank you so much!🥰 I appreciate your time and effort bro

my ps5 controller is reading 29k polling rate on the tester lmao

Great video! If you figure out any way to get better results out of the Astro C40 controller please let me know!

Does scuf have the same input delay as the ps4 controllers and with the ps5 scuf reflex because they’re using the same inners and drivers ?? If you can answer I’d appreciate it a lot

So for the Kingkong2 controller it doesnt really work, but it does help, it doesnt lower the latency, but it makes it more consistent, without this delay jumps between 8 and 12 ms every input, now it sticks at 10 ms.

Thank you god I’ve been waiting for this video from fr33thy for about 2 years . I was the original one who showed ds4 software when we worked on my pc and kept bugging him on discord lol if there’s anyone who can push this too 1400 it’ll be fre33thy. Your next project is too push the ds5 to its limits lol

Never thought we'd see a controller video :D

are you going to make an optimization video for windows 10 pro?

Hi and thanks for the tutorial, I'm trying to achieve the lowest input lag on a 8bitdo dongle does is it suitable to overclocking or does an alternatives exists to have better input lag with a dongle?

how to improve input/delay for keyboard and mouse? i mean yea u can increase refresh rate/hz of the mouse but theres is something more?

great video, explains the problems I was having with overclock software. I am waiting for the new PS5 dual sense edge controller to be released and then will run through this process again. Thanks

could you do an updated video on the ps5 pad and the new high speed support 8k rate on the hidusbf and updated firmware on the controller , i think there are many inconsistencies but maybe you can show us how to do it properly

it doesn't work when i have my wire plugged into my controller but it works without a wire. wireless works but with a wire doesnt how do i get it to work with a wire

You did not switch profiles, within profiles you didn't select "SAVE" to activate the overclock, you still had it on default which is why you saw extremely similar numbers

Thanks this helped me

i currently use a DS4 controller on PC for gaming competetively and you said in the video both the Dualsense and the Dualshock controllers have 4ms input latency so would it be even worth upgrading to a Dualsense then?

I've got the razer raiju controller you can experiment with that if you want to add it to your list

Do you know if the hidusbf overclock works with BT wirelessly connected ps4 controllers?

Ds4 has the same over clock within the software. Why are you using the mouse one?

A good tipp is by problems, disable seurce boot on the bios

Error! Player 1 - XBOX 360 Controller Not Found! Press Enter Key To Exit why wont it find my ps4 controller, i have ds4 windows running and i try it but doesnt work, pls help

Hello Chris, i can't find your video on mouse overclocking but anyway, i have a mouse that i want to overclock, i know that it's possible because on the Overclock.net thread off SweetLow someone overclock the same model at 2900hz, the problem is that i got an error with ATSIV when running the " Atsiv.exe -f hidusbf.sys", the mouse don't overclock, i can downclock but i can't overclock, so i think it's a windows version problem, can you tell me what version you use while doing your video on this? i really need it, Thx for reading this message and sorry for my bad english

do you asume it will be the same with the ps5 scuf reflex?

What’s the best Xbox controller. I prefer the shape over the ps controller?

chris can u help me : Why do i get 50 ms mouse input lag on winXP with a 125Hz no name mouse vs 100 ms lag on win 10 with logitech g403 hero with 800dpi and 500 Hz polling rate on glquake? The game is capped at 72fps.?

i have a dualsense but i cant seem to get it higher than 1040hz polling rate instead of +-1300hz what might be the cause?

Keyboard and mouse input lag after using DDU chris? Only games

Anyone trying this on fortnite on a wired ps5 controller connection found a fix when your building sometimes it feels like you have macros and sometimes when your character is running you randomly stop

my controller doesnt show up in the overclock software, only the audio point shows up can someone help? (ps5 controller)

I'm on a ps4 controller but it won't let me install it gives me an error even when I turn off secure boot

it goes red when i make the overclock and it wont work unless i revert it

If i cant use the filter on and i can only put the numbers like 1000 and still had 4 on my response it will still change ny input delay or should i stick with default?

U didn’t apply the „save“ profile on the controller after u saved it u have to go to the first page „controller“ and select it. On urs it still says selected profile default

Yoo that's a great video. I'd like to ask you can i get the same response time of dualsense for my Dualshock4 controller? I have dualsense but i did not like cuz it feels too big on my small hands but i noticed a waaaay better response time than dualshock4, so yep the question is can i make my dualshock4 as responsive as dualsense?? Thanks!

It's unfortunate that the only two hall effect controllers I'm aware of can't be successfully overclocked.

Good video, I think I will buy a DS5 controller.

Great Vid !

So the ps4 controller with a strike pack has less input delay then the elite series 2

Wow this is life saving

does any of this apply to arcade sticks ?

Where do I get that certificate from?

Hey on the hidusbf Thing my controller dosent show up

WELP so I just made a ps4 controller 1000hz, I will do a follow up video and show how to overclock to 4k or 8k if possible. Sorry about the misinformation, looks like xbox controllers just suck and are hardware locked with the hz. Looks like you can overclock old gen playstation just as well! Want CHEAP Windows and Office Keys! Flat 10% Off on all software. Coupon code: FR33THY www.bnh-software.com/?ref=8WYNN95vZQF6S

Where are the links in the description?

My astro c40 is not showing in DS4windows how can i fix it?

I tried it and I’m on window 11 and scuff controller and it’s not working, it’s annoying

I have got 0.01ms and pulling rate 28000, and I don't know if true or not

cant see no links for the downloads

Does having a high end pc vs mid range pc affect input delay?

Man I hate that when controllers take over your audio

tested the thrustmaster eswap, out of box is getting consistent 1.9ms

oh no no no seriously tho, respect the mad video consistency and useful content

YES THANK YOU

Make an updated one for kbm plz

where you download sweet low certificate

i got the edge dont know why it dont go to 1000hz in the test higers go like 600hz

thank you ! i did the LordOfMice /hidusbf overcloack, but in latencymon wdf01000.sys is so high, and in game it s weird... is that normal ?

i just tested it and my ps5 controller came with a 1ms response straight up. No need to mess with any overclocks. The only problem is that my results very between 0Hz and about 1.5hz. Average score is 1.1hz. So very inconsistent. I am running it through Bluetooth. Is it possible that something might be interfering with the signal?

I got 1ms by default in DS4Windows in bluetooth 5.0 (Amitosai MTS-BT5PRO) with my dualsense controller

can i use xbox 1 controller on ds4 windows?

the only issue with ds4 is that it runs as an overlay so the clicks are less delayed but the stick inputs are delayed. kinda like running exclusive fullscreen vs not running it. the only way to reduce the delay is to use the "hide Ds4 Controller" option but it bugs out at doesn't launch into exclusive mode. the latency is consistent but its delayed

this also work for xbox controller?

15:55 delete overclocking for controller

Just tried my Razer Raiju and got 2000 hz and 0.48 average, thx for the nice Video btw. :)

My DS4 gives me an average of 0.55ms and 1800hz polling rate. I ordered a better usb cable as I've been using a random one so i'll see if that makes a difference. I have a PS5 controller too so i'll test it and see how it compares, but I'm happy with the results so far.

Can you overclock a keyboard and mouse like this?

Do you know what polling rate is the ports on ps5 console and what i should use wired or bluethooth i talk only for ps5 console not pc please answer

круто, спасибо!

Thanks

I wish he reviewed Google Stadia service to see how gaming over stream is in terms of latency. (as well as the Stadia controller it self)

I wish the PS5 left analog stick was in the same location as the xbox. I'm one of the very few people that like to play with a controller+mouse combo on PC, and the position of that PS5 analog stick makes playing with that combo pretty much impossible.

Now we just need ps5 controllers that have paddles they are so hard to find in stock

work with bluetooth?

how do you uninstall the sweetlow certificate? My memory integrity wont turn on because the sweetlow hidusbf.sys is blocking it.

I used a PS4 Battle Beaver controller and got a 1400 Polling Rate Hz

I do not use controllers but imma watch it anyways.

so whats the best controller latency wise?

i can’t get ds4 to work on server still trying to figure it out:/

Hi FR33THY! I have an XBox Elite 2 controller. Went through the steps but it wasn't recognized by the program you gave. Does this only work for PS controllers buddy? Thank You! Halo Infinite Is Out BTW! Huge FR33THRY Optimization Video Hoped For!!!! ♥️

Omg. Please let them bring out the back button for ps5 I need to use itttt

i just tested my dualsense after oc and got 3.5k hz

You can use a wireless controller wired.

Well some games like fortnite gets double input when DS4 is running in the background.

Chris I love you.

My ps5 controller wont go over 600 for some reason, would my cpu overclock affect this?

are you still rocking the 1809 server?

i watched the video 3 times i still dont know if its about the ps4 or ps5 controller

i get with the ps5 controller 0.01ms, polling rate 65k wtf

i just compared my xbox elite series 2 and my ps5 controller. the xboxs response time is around 7.2-7.5. as the overclocked ps5 controller is 0.22-0.01 response time. overclocking the xbox controller makes no difference.

Great idea. But when playing multiplayers you got already a delay of over 100ms within your game on console, because of international servers. So what's the point of reducing 5 ms here and there?

Im gomna try this oc with my ps2 controller

You should actually set it to 250 not 1000 poll rate as the ps5 controller will 4x the poll rate and you'll actually encounter some issues within games.

My pc gone crazy after that i have huge fps drops in game with 99% system interrupt do u know solution?

Even with 1k or 8k I get latency pretty badly from alot of different games. ;(

What's the best nvidia driver right now?