THE SECRET of the Old Masters of CARPENTRY | Woodworking Tricks and Tips for Beginners 

😅'

❤❤❤

Hey, that makes sense I'm using it today thank you. This will save me time because I nitpick every connection that way w my high demand boxes under the pressure 5k watts puts on them

la tecnica es muy buena y queda hermoso , pero cometes un error , al poner cola en los tarugos o varillas, si observas cuando van entrando la cola queda afuera, por lo tanto no queda bien encolado ,la cola la debes poner en los agujeros y de esa manera al ir metiendo las varillas la van arrastrando a lo largo de todo el agujero y asi te queda todo encolado

I use this technique on my speaker boxes that need to be the strongest for very high power applications. It's the best, and easiest while saving money on no ugly metal fasteners. Plus reduces weight and shipping costs too!

Y es mucha mas bella que tornillos de metal tambien, y mas fuerte! Me encanta

I understand the concept of this video as many people do not have the sophisticated tools to achieve such an outcome. Thanks for an informative video. Perfect corner!

I agree but the dowels are in tightly enough that they are not dependent on the glue to stay in.

Hello. Thanks for watching and leaving your comment. Be always welcome.

I thought I saw him use a block where the drill bit came out (4:20)

@@rosc2022 yeah, but holding it by hand didn't prevent any of the tear out, it needed to be clamped.

Good additional comment to an excellent video I was thinking the same thing.

Disagree on your suggestion for placement. Right through the middle of the 45 cut will make for the all-around strongest joint. If you are mostly worried about stress pushing the joint towards an obtuse angle then yes, your suggestion would be better. But you would be sacrificing strength in the other direction- it would weaken the joint for stresses pushing the joint towards an acute angle. Two pegs toward the edge and two toward the center would be best if strength of the joint was the primary concern

Lol spot on 😄

I am sorry, this is video is borderline BS, and I am extremely noob. If it's about the concept of miter joint with dowels, then the thumbnail alone is good enough to know what to do. Anybody who wants to learn mitre joint with dowels from this video, will only be misled. Video shows mitre cut with a pull saw, but doesn't show how the mitre is matched. Any inexperienced woodworker will find out that their mitres aren’t aligning if they follow this. Video shows glue is applied to the miter but doesn't show how they are held together with applied force. No master of woodcraft will ever glue their joint without ever reinforcing it. Video shows finnish is applied yet mitre gaps aren't sealed with wood powder and glue.

This isn’t for beginners

Thanks for watching 😉👍🙏

thanks for watching and leaving your comment 😉👍🙏🙏

Yeah - thought the same - that's what i would have done!

Right...and how did he get that perfect 45 degrees on the mitre cut block? Hmmmmm

Olá amigo. Angelim. Grande abraço e cuide-se. 😉👍🙏🙏

Thanks for watching my friend 😉👍🙏

Wood glue is super strong usually the wood will break first before the glued joint

@@moistfart9569 And how does this apply to what I stated??? Of course the wood will break before the glue line but that is not in any way what I STATED. Read the comment before you reply!!!

I agree. I would have sanded the dowels a bit, just to create a little more room for glue. It does need a little body to gain strength.

@@rhandley1000 any more glue will be visible when sanding down since the purpose of joints like these is to give an illusion it is just wood and nothing else but all of you are clearly woodworking professionals

@@moistfart9569 That is an excellent point, which is why I save my sawdust amigo ;) And yes, I am a professional - Maple Creek Woodworking, Baroda, MI. Didn't know it was that obvious....

Thank you for watching and leaving your comment 😉👍🙏

@mwc8493: Make your own video instead of criticizing!

Hello. Terima kasih kerana menonton dan meninggalkan komen anda. Sentiasa dialu-alukan.

Thanks for watching 😉👍🙏

Thanks for watching 😉👍🙏

😉👍🙏 valeu amigo, obrigado por assistir e deixar seu comentário

Thanks for watching 😉👍🙏

😉👍🙏

😉👍🙏🙏

Thanks for watching my friend 😉👍🙏

😉👍🙏

Valeu Carlinhos! Obrigado por assistir e deixar seu comentário 😉👍🙏

Too right. This whole thing is fake. He seriously eyeballed those dowel holes that came out perfectly aligned?

What on earth are you guys talking about?

as evidenced by the circular saw blade burn on the left half

Thanks 😉🙏

@@WillWoodDiywoodworking oke

Thanks for watching 😉👍🙏

😉👍🙏🙏

Glue the holes not the dowels!

Nobody does it, and nobody has probably ever done that apart from people on youtube who try to sell it as a genuine skillful woodworking technique. In past, they would have used dovetails or maybe nails or reinforcing splines, in present it would be either the three previous or some hidden dowels, biscuits, dominos, screws, box joints/finger joints or some hardware which allows for disassembly. Given it looks ugly as hell, there is no reason to use this type of joint other than a lack of skill or laziness.

@@janbernad4729 I think it looks very nice. Many other people do also. It is a fairly inexpensive way to make a strong joint. It is stronger than most of these other joints. Dominos, LOL. $1500 dollars for a Festool Domino tool. This joint would take a fraction of the time compared to either of the mortice and tenon or finger joint, and they make jigs for it that you can use a regular drill with. And it requires considerable less skill than others which is an advantage. As far as laziness goes, one might say if you are short on time, this joint would be helpful. So your estimation of it is lacking and due to your own ignorance and subjective sense of ugly.

@@adrianalanbennett "I think it looks very nice. Many other people do also." This is just as subjective claim. "It is a fairly inexpensive way to make a strong joint. It is stronger than most of these other joints." Can you provide any arguments for this? If you look at common practice, if done properly, any of the joints I mentioned is strong enough for most applications. "Dominos, LOL. $1500 dollars for a Festool Domino tool." I know that it is expensive and provides not much advantage over dowels, I only included it just to have the list more complete. "This joint would take a fraction of the time compared to either of the mortice and tenon or finger joint, and they make jigs for it that you can use a regular drill with." Hidden dowels take even less time and they equivalent tools. "And it requires considerable less skill than others which is an advantage." Same goes for the hidden dowels. "As far as laziness goes, one might say if you are short on time, this joint would be helpful." If you're short on time, why not use the hidden dowels? If the time is your significant concern, the very dubious aesthetics of this joint are hardly worth the extra time and effort. "So your estimation of it is lacking and due to your own ignorance and subjective sense of ugly." I believe that ignorant would be to hold this joint as something genuinely useful and worth the effort, while there are many other solutions which are objectively better. As for the subjective sense of ugly, I can't claim that noone would ever find the supposed look of this joint ugly, but I can claim that majority of people would prefer some of the other options which i have listed, if they could choose. However, we can objectively judge the craftsmanship involved in making this joint, which does influence the actual look just as much as the construction of the join. Objectively speaking, the work isn't very good - there are gaps along the miter and the dowels, there is also quite a significant amount of tear out at the same places, which is something that could be in this case quite easily avoided with proper work procedures.

😉👍🙏🙏

Thanks for watching my friend 😉👍🙏

😉👍🙏🙏

I don't think the saw is necessarily dull. Could be wrong but that wood looked like hickory. Hickory is one of the hardest and most dense woods to work with.

thanks for watching and leaving your comment 😉👍🙏🙏

Thanks for watching 😉👍🙏

How very rude keyboard warrior, get a life.

‘Sharpen’, not ‘sharp’.

​@@johnstarkie9948ooh watch out the grammar nazi is out. There their they're now, your gonna be aite kid

Tell us you've never handsawn seasoned and quartersawn oak without telling us 🤦‍♂️

Also, why not just run the pieces through a table saw set to 45°?

thanks for watching and leaving your comment 😉👍🙏🙏