The Ultimate Foam Cannon: Griot’s Garage BOSS Foam Cannon!

Подписаться 1 млн

Просмотров 40 тыс.

50% 1

The Ultimate Foam Cannon: Griot’s Garage BOSS Foam Cannon! Welcome to the foam party wars! I present the Griot’s Garage BOSS Foam Cannon, pitting it against two formidable contenders: the MTM PF22.2 and Griot’s Garage Brilliant Shine Foam Cannon.
✅ Click here to purchase on Amazon: amzn.to/3swfza2
Discover why the Griot’s BOSS Foam Cannon emerges as the champion of foam cannons!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - ‪@PanTheOrganizer‬
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Griot’s Garage BOSS foam cannon (Amazon): amzn.to/3swfza2
Griot’s Garage BOSS foam cannon (Obsessed Garage): bit.ly/3swfT8K
Griot's replacement bottles: bit.ly/3uOCs9x
Griot's Garage BOSS foam cannon rebuilt kit: bit.ly/47ZlX9r
Mosmatic 1/4” plug: bit.ly/46btcJm
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/465OPe5
Koch Chemie Gfx (Car Supplies Warehouse): bit.ly/40w1XYY
Koch Chemie Gfx (Obsessed Garage): bit.ly/3QTUVK9
Koch Chemie Gsf: bit.ly/3slua8l
🇨🇦 For people in Canada:
Griot’s Garage BOSS foam cannon (Amazon): amzn.to/47xodUF
Griot’s Garage BOSS foam cannon (Obsessed Garage): bit.ly/3swfT8K
Mosmatic 1/4” plug: bit.ly/47rkurr
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3ud267D
Koch Chemie Gfx (Car Supplies Warehouse): bit.ly/40w1XYY
Koch Chemie Gfx (Obsessed Garage): bit.ly/3QTUVK9
Koch Chemie Gsf: bit.ly/3QJgKZG
🇬🇧 For people in the UK: bit.ly/3fgoENJ
🇫🇷 For people in France: c3po.link/QCWWjkv74R
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Watch more of my videos below:
✅ Foam cannon battle: • FOAM CANNON BATTLE !! ...
✅ New MJJC Foam Cannon S v3.0: • NEW MJJC FOAM CANNON S...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on RU-vid, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my RU-vid videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#GriotsGarage #BOSS #FoamCannon #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Авто/Мото

Опубликовано:

5 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 363

@PanTheOrganizer 7 месяцев назад

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: Griot’s Garage BOSS foam cannon (Amazon): amzn.to/3swfza2 Griot’s Garage BOSS foam cannon (Obsessed Garage): bit.ly/3swfT8K Griot's replacement bottles: bit.ly/3uOCs9x Griot's Garage BOSS foam cannon rebuilt kit: bit.ly/47ZlX9r Mosmatic 1/4” plug: bit.ly/46btcJm Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/465OPe5 Koch Chemie Gfx (Car Supplies Warehouse): bit.ly/40w1XYY Koch Chemie Gfx (Obsessed Garage): bit.ly/3QTUVK9 Koch Chemie Gsf: bit.ly/3slua8l 🇨🇦 For people in Canada: Griot’s Garage BOSS foam cannon (Amazon): amzn.to/47xodUF Griot’s Garage BOSS foam cannon (Obsessed Garage): bit.ly/3swfT8K Mosmatic 1/4” plug: bit.ly/47rkurr Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3ud267D Koch Chemie Gfx (Car Supplies Warehouse): bit.ly/40w1XYY Koch Chemie Gfx (Obsessed Garage): bit.ly/3QTUVK9 Koch Chemie Gsf: bit.ly/3QJgKZG 🇬🇧 For people in the UK: bit.ly/3fgoENJ 🇫🇷 For people in France: c3po.link/QCWWjkv74R Watch more of my videos below: ✅ Foam cannon battle: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wF5pDPE7vr0.html ✅ New MJJC Foam Cannon S v3.0: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L-3608MjklU.html

@mnmn1665 7 месяцев назад

I've been using the BOSS cannon since it's release. No issues. I also use a deionizer. Mine is an On-The-Go dual bed. Also works perfectly. Thanks for all your reviews.

@str8racn 6 месяцев назад

YOU have made it with your quality content and honesty, so thank YOU! I typically only buy what you review with some new things here and there, but your reviews have been on point for years. Explanations of whys and hows and don'ts. I said a lot lol, but appreciate your content.

@PanTheOrganizer 6 месяцев назад

I appreciate that! And thanks for the trust you place in my opinion. Of course my videos highlight the stuff I like and it might not work for everyone, but hopefully my videos help people make better purchasing decisions all while providing important information and the ability to share my passion. Happy new year!!

@gouldnj 7 месяцев назад

I just bought the MJCC V2 because of your review and it’s my 4th from different manufacturers. I use the Adam’s 2.0 washer @ 1.8gpm and 2500psi. It’s far and away the best foam cannon I’ve used. Thank you for your unbiased reviews.

@PanTheOrganizer 7 месяцев назад

That's also a very good foam cannon!! Enjoy it.

@jamesgiannakis6455 7 месяцев назад

A nice feature on the boss cannon is you can screw any griot's standard spray bottles into the spray head without using the reservoir and the gun is designed to mix the solution ratio right out of the attached solution bottle. Works great . Glad to see you reviewing Griot's products. Great job!!

@PanTheOrganizer 7 месяцев назад

Thanks James! Yes I even tested screwing the foam cannon onto a bottle of Koch Chemie Gsf and that works too!

@ronaldomendoncavilela1706 7 месяцев назад

Congratulations, Pan! Very useful information, as usual!

@PanTheOrganizer 7 месяцев назад

Thanks Ronaldo!

@tonydibartolo191 7 месяцев назад

Yes I have both cannons from Griot’s. Excellent products.the 3 in 1. Ceramic spray is awesome too

@PanTheOrganizer 7 месяцев назад

Cool! Which is your favourite of the two Griot's foam cannons?

@MyGuyKirby 7 месяцев назад

I too have both MJCC and GRIOTS BOSS cannon and both do fine. Key with Griots is the ability to mount directly on a bottle is key to my use. But the best is having their customer satisfaction and product warranty, I have the pleasure of knowing they do stand on the word.

@PanTheOrganizer 7 месяцев назад

Good points!! Which specific MJJC foam cannon do you have?

@davestewart9146 7 месяцев назад

As a DIYer I always appreciate the options you share on your channel, thanks Pan 👍😁

@PanTheOrganizer 7 месяцев назад

Glad you like them! What foam cannon are you currently using?

@davestewart9146 7 месяцев назад

@@PanTheOrganizer the mjjc and yes at 60 years old I’m like a little kid playing with the foam lol, have a great day my friend

@PanTheOrganizer 7 месяцев назад

Hehe I totally get that! I'm 42 and still feel like a teenager when detailing, I enjoy it so much. It's a soothing and relaxing experience for me.

@mirsohail 7 месяцев назад

Dear Pan I respect you a lot for all your honesty and brilliant reviews. I too own 911 and used all your techniques and recommendations. It’s looks amazing. Thank you much. I own GG brilliant finish foam cannon - regarding this video, in my humble opinion, MTM has the best output ( it leaves even /uniform wet surface behind). Cheers.

@PanTheOrganizer 7 месяцев назад

Thanks! All three foam cannons in this video are excellent, no doubt about it. People can pick which features or price point they prefer.

@jeepinspence 7 месяцев назад

My first splurge for my shop. I love it. No issues at all and performs flawlessly every day. I don't use the auto metering insert on mine, didn't care for it. Love the stainless internals and I've dropped it numerous times to no effect. I was so smitten with it I bought all their soaps and a G8 and G9 DA. The stripping shampoo has an unpleasant aroma but all of them foam and work well. The DAs are far more powerful than the Porter Cable 7424xp. I'm looking at a cordless(likely DeWalt since I'm the battery line) rotary as I'm finding I need more power for some tasks and I cut my teeth on rotaries when I started back in the 90s. I had a big old Milwaukee that was built like a Sherman tank and was about as heavy. :) Have a blessed day.

@PanTheOrganizer 7 месяцев назад

Good to know! Thanks for sharing your personal experience with it. It's always valuable information for viewers who want to see how people like a product or not.

@tz1708 7 месяцев назад

I've used the Boss Foam Cannon for several years now and its best feature is the metering system and hooking directly to their Surface Wash bottles. No mixing or not making too much or too little soap when washing the car. You should try it. Love the video and all your reviews. Thanks

@PanTheOrganizer 7 месяцев назад

Thanks for sharing your experience!

@bobbyjones2112 7 месяцев назад

I also really like the Adams premium foam cannon. It’s got a wide mouth too and it’s a really well-made unit.

@Brutusofbaine 7 месяцев назад

Great video. I have the MTM and it is awesome. I just switched to koche Chemie GSF. Game changer! Thank you for everything!

@PanTheOrganizer 7 месяцев назад

Thanks!

@neilwalker5041 7 месяцев назад

The Griots foam cannon looks like it will perform at a high level for a long time. Nothing is more frustrating than a foam cannon making weak foam after it use to be awesome. The lifetime warranty is the best warranty available. Thank you for the video Pan.

@PanTheOrganizer 7 месяцев назад

Yeah it seems built like a tank, with internals to match the overall high quality design. What foam cannon are you currently using Neil?

@neilwalker5041 7 месяцев назад

@@PanTheOrganizer Pan I am still using my MTM as it still works very well. The plastic container does twist when I tighten the lid and having to use a funnel is a pain too. Otherwise it just works and I love the foam it produces.

@gnawty4662 3 месяца назад

Thank you Pan for another incredible video. Just ordered using your link 😊 I went w/the Griots Brilliant. If it works well, great!

@PanTheOrganizer 3 месяца назад

Good pick! Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@Spaz_Racing 7 месяцев назад

I bought the GG Brilliant Finish FC back in January 2021. I probably have 75-100 hours on it with zero issues ever. It’s still exactly how it came out of the box when brand new.

@PanTheOrganizer 7 месяцев назад

Good to know! I also have zero issues with my Brilliant Finish foam cannon. Thanks for sharing!

@nomad509 7 месяцев назад

With my limited usage I honestly have not been a huge fan of the PF22.2 foam cannon. I feel sometimes it is still susceptible to tipping over and I could never get any consistency but this video may have highlighted a few mistakes. I believe going forward I will most likely fall in love with the BOSS cannon! I am actually surprised you did not mention the screw on bottle feature. If I gathered your recommendations correctly I'd be using roughly 2.5 ounces of soap to 25 ounces of water according to how much liquid I visually saw in your Griot's cannon.

@bstewartexecutivecarcare3797 7 месяцев назад

I first bought the MTM 2.0 then tried the Brilliant Finish and found it to be fantastic. One note the metal ball will rust in the canister if you leave any type of water in it. So I normally start with my pre rinse with the MTM and then use the Brilliant Finish for laying down the nice thick coat of foam for the contact wash. 👍✌️☮️

@PanTheOrganizer 7 месяцев назад

With all my foam cannons, I like emptying the container after use, then filling the container with clean warm water, running it through the foam cannon head with the pressure washer, which helps to better dissolve and flush out any chemical residue that might still be in there. And then I let the parts air dry overnight. I also use deionized water in my pressure washer setup, which helps.

@Riverguide33 7 месяцев назад

Thanks, Pan. 👍

@PanTheOrganizer 7 месяцев назад

Thanks for watching

@flytyingguy1 7 месяцев назад

I had a cheap foam cannon from Amazon & couldn’t understand why I wasn’t getting a nice thick foam. I thought it may have been the soap? After seeing a few of your videos I decided to give the Boss Griot’s Garage a try & it’s like night & day! Love it!

@PanTheOrganizer 7 месяцев назад

Sometimes even cheaper foam cannons can still deliver good foam. There are many factors that influence the quantity, thickness and richness of snow foam: 1. Type of foam cannon (smaller orifices lead to thicker foam, but can potentially trip your circuit breaker depending on your setup) 2. Type of pressure washer (a higher amount of GPM water output leads to more foam, so a pressure washer with 1.3 GPM will produce less foam than one that pumps out 2.1 GPM) 3. Type of snow foam (not all snow foams produce the same amount of foam) 4. Dilution ratio of snow foam (adjust the dilution according to your setup. Start with the recommendations on the label, and increase the amount as needed). 5. Water quality. The better the water, the more foam and suds you get. So deionized water will always produce more foam compared to hard tap water, for example.

@BXGreen 7 месяцев назад

Looks like a pretty good foam cannon! Love made in the US! Lots of features for price. Looks to me like Boss wins, but u can’t go wrong. I do like a wide opening, but I also like to adjust direction like the Mtm or the MJJC. Good to know there’s another great option! Feel better sounds like u may have a little cold!

@PanTheOrganizer 7 месяцев назад

Yeah I was a little under the weather here. Even that doesn't stop me from making videos for you guys hehe. Thanks for watching!

@shrubs2k2 Месяц назад

Great comparison... I'm a weekend warrior for cleaning my vehicles so I went with the Brilliant Finish Foam Cannon.

@PanTheOrganizer Месяц назад

Good pick! The Brilliant Finish Foam Cannon had taken first place in a previous foam cannon battle video that I made here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wF5pDPE7vr0.htmlsi=iD5RMNZfUv7cXiGD Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@shrubs2k2 Месяц назад

@@PanTheOrganizer Update! I washed my ruck with this yesterday and was amazed at the foam. Thanx again!!

@jiml9855 7 месяцев назад

Hi Pan, great video and review as always!

@PanTheOrganizer 7 месяцев назад

Glad you enjoyed it! What's your current foam cannon?

@jiml9855 7 месяцев назад

@@PanTheOrganizer MTM Hydro and MJJC Pro. Both are great, the larger mouth for filling is preferred.

@PanTheOrganizer 7 месяцев назад

Yeah I also prefer wider openings.

@PapaSmurf918Detail 7 месяцев назад

Love the boss foam cannon. Definitely prefer the wide opening. Makes for easy clean out as well. Great video brother! Hey, happy holidays from the Smurf Family my friend 🤜🤛

@PanTheOrganizer 7 месяцев назад

Thanks man!! I hope you're doing well brother, and I hope you will have awesome holidays!!

@PapaSmurf918Detail 7 месяцев назад

@PanTheOrganizer All is well my friend! 🤜🤛 Will do man!

@aldussavila2805 7 месяцев назад

Ah yes, another episode of my favorite detailing channel

@birddogg3270 7 месяцев назад

Looks like it is right on the griots garage web site, and in stock. Also , “the clean garage” has it. I buy a lot from them, and they are in PA. I just recently upgraded my old mtm to the larger bottle myself. I do like the idea of the ball on the siphon though.

@PanTheOrganizer 7 месяцев назад

Thanks Aldus!

@wescat2 5 месяцев назад

Great video Pan. I have the Boss and my first one leaked and they replaced it no questions asked. I did have pay for return shipping though. One note. The Boss also has a horizontal and vertical fan like the MTM.

@PanTheOrganizer 5 месяцев назад

Thanks for sharing! Good to know the customer service is as good as people say.

@Jumalten001 7 месяцев назад

Im sticking with my MJJC, still cant be beat.

@PanTheOrganizer 7 месяцев назад

Which one do you have?

@jimprovax6846 7 месяцев назад

Thanks Pan. Griot’s garage BOSS is the best foam cannon in my mind. Quality built for sure. This baby should last for years. Enjoy your evening.

@PanTheOrganizer 7 месяцев назад

Thanks Jim! Is that the foam cannon that you use?

@jimprovax6846 7 месяцев назад

Yes. I started out using the inexpensive foam cannons. Decent results. They didn’t last! I started researching and got the BOSS. No joke quality piece. If you buy quality and take care of it. It will last. Solid construction. I really enjoy what you bring to the table. Keep up the great work.

@jimprovax6846 7 месяцев назад

Hope you’re feeling better soon.

@PanTheOrganizer 7 месяцев назад

Thanks for the kind words Jim! It's nice to see my viewers appreciate my videos and the fact I share my knowledge and experience with you all. And I fully agree with you in when you buy a quality piece, it will outlast a cheap product. Sometimes people default to buying the less expensive thinking it's just a foam cannon, who cares. Then they have issues or might have to replace it more often, compared to buying one high quality piece, taking care of it, and have it last for years at peak performance if they take care of it. :)

@LarryKay41510 7 месяцев назад

@@jimprovax6846didn’t last? How did it not last?

@JuanVazquez-gg8nc 7 месяцев назад

Pan is the GOAT of car detailing !!!!!

@PanTheOrganizer 7 месяцев назад

Thanks Juan! Let’s goooo! 👍🏻

@JuanVazquez-gg8nc 7 месяцев назад

@@PanTheOrganizer your welcome 🙏🏼

@PanTheOrganizer 7 месяцев назад

🙏🏼 What's your favourite video on my channel, so far, by the way?

@JuanVazquez-gg8nc 7 месяцев назад

@@PanTheOrganizer the award & new products videos 💯

@trifin5772 7 месяцев назад

Thanks for the video! You have the snuffles - get well soon!

@PanTheOrganizer 7 месяцев назад

Hehe this was filmed a while ago, I'm fine now. But this is proof that even under the weather, that doesn't stop me from making videos for you guys! ;)

@user-ut3lb5fd5c 7 месяцев назад

Sticking with my MJJC. Options are great for all though

@PanTheOrganizer 7 месяцев назад

Yes they make very good foam cannons too. I have done videos about some of them, including the newest S v3.0

@bobbyjones2112 7 месяцев назад

All three are good. I think the boss is the best though for sure. I have the MJJC foam canon pro V2.

@piggietruckerjones7545 7 месяцев назад

Griot's is local to me so I am very happy you are checking out their stuff!!

@PanTheOrganizer 7 месяцев назад

Oh cool! Which state is this in?

@piggietruckerjones7545 7 месяцев назад

@@PanTheOrganizer Washington State they are in Tacoma Washington. Their store is awesome!

@PanTheOrganizer 7 месяцев назад

Good to know!!

@TheBreakfastLover 7 месяцев назад

I would also add to ensure you have a large gauge extension cord for power supply. My Active 2.0 kept shutting off despite plenty of amperage. It turned out my extension cord from Crappy Tire was the culprit.

@PanTheOrganizer 7 месяцев назад

Yes it's important to get extension cords in the gauge that matches the pressure washer's electrical requirements.

@omranmkv 7 месяцев назад

Hi Pan, love your channel Have you tried testing thick foam vs runny foam effectiveness on removing dirt!?

@steveottavaino3804 7 месяцев назад

I love my MTM cannon, the foam produced in comparison to others is milking mice in terms of effectiveness. Were I to replace it I’d have two solid reasons, 1) the threads are easy to misalign and potentially strip, and 2) when trying to clean the bottle out for storage the soap bubbles hang at the bottom and take far to long to get out, a PIA for sure. This is important for getting pure water through the cannon for the post use flushing procedure. Long term durability of the MTM is proven, the Griots will need prove itself over time/heavy use. When, if ever, the MTM goes off line I’ll for sure have the Griots newest model on my short list. Thanks for the enjoyable and educational content always. Be well!!

@PanTheOrganizer 7 месяцев назад

Thanks Steve!

@paulattanasio3061 7 месяцев назад

My tip that I use to keep my foam cannons clean is that I have extra bottles for each type and only keep fresh clean water in them so all I have to do is remove the unit from the bottle with the soap and screw it on the bottle with the water and run it. That way i also save whatever product is still in the bottle.

@GLI_1701 7 месяцев назад

I have my mjjc V2 connect it to my active 2.0 and it is super effective

@Dstromb232 7 месяцев назад

Nice info.

@PanTheOrganizer 7 месяцев назад

Thanks!

@vaskodimoski5690 7 месяцев назад

I have McGuire's mega cannon it has the feature of horizontal and vertical spray and it has good foaming capabilities

@StudentLankaTube 7 месяцев назад

I found you through podcast. great content.

@piggietruckerjones7545 7 месяцев назад

Which podcast?

@armoredsaint007 2 месяца назад

Great review, wish MTM would keep up with the times, I do like the detent but it took them many years to go wide mouth and that cheap zinc connector

@iamsam8446 5 месяцев назад

The BOSS cannon is a BEAST. To use the regulator tips, you have to use Griot's chemicals. This is the one you want if you're a pro because of it's hefty construction and mostly SS build. However, if you're an enthusiast, this is more than likely overkill. The Brilliant Shine cannon may have better results depending on your setup.

@PanTheOrganizer 5 месяцев назад

Thanks for sharing your thoughts. Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@dtna 7 месяцев назад

I still love my original MJJC foam cannon. No peoblems and a good value for three years.

@PanTheOrganizer 7 месяцев назад

Yes they make good foam cannons. Especially their newest MJJC S v3.0 and Foam Pro v 2.0

@gflores7018 7 месяцев назад

Ver.2

@jseels 7 месяцев назад

I have the MJJC Pro as well. Still get great foam output from the little Ryobi 1800psi 1.2gpm brick unit - honestly the best value pressure washer for $99… you can own basically own a 2nd as a backup and never have to worry about a pressure washer issue out on the job.

@lmSteveo 7 месяцев назад

How many oz of soap are you all using for the mjjc?

@jseels 7 месяцев назад

@@lmSteveo I use like 1:7 ratio or 100ml soap and 700ml water. I’ve heard some use 1:5 ratio but that seems like way too much soap

@08c6vette 3 месяца назад

Very well done, informative video, just started shopping for my first foam cannon so I've watched a 1/2 dozen or so comparison videos today and most of them have the Griots as #1, although there was some impressive ones at a much lower price point. Most likely going to go with the boss, although it looked like the cheaper Griots foam was actually a little thicker.

@PanTheOrganizer 3 месяца назад

Yeah there are tons of high quality foam cannons these days even at lower price points. But for build quality, for the sure the BOSS foam cannon takes the cake. That being said, there are other very very good foam cannons like MJJC Foam Cannon S V3.0, MJJC Foam Cannon Pro v2.0, Griot's Garage Brilliant Finish Foam Cannon, MTM PF22.2, etc.

@08c6vette 3 месяца назад

@@PanTheOrganizer I had pretty much made up my mind on the Boss after watching the other comparison videos, as I've always had pretty good luck with Griot's products (even though they're sometimes ridiculously pricey) but your in depth video on the quality of it and how well it works finally sold me on spending the $100, rather than buying one for $40 or 50 bucks that I might have to replace every or every other year. Amazon just delivered it and I can't wait to try it out. I also ordered a bottle of the Kochchemie GSF and a bottle of their Green star too. Thanks.

@roanokejoe 2 месяца назад

Another great video! A slight correction. Griot's will not REPAIR the BOSS foam cannon. They will replace it if faulty.

@chrissweet391 7 месяцев назад

Pan, I'd love to see your opinions on the best snow removal tools and techniques. Are the foam sweeps safer in paint than a brush? Winter is here in Nova Scotia.

@PanTheOrganizer 7 месяцев назад

Hi Chris! I have many winter detailing tips videos on my channel, here are a few: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0zBK5Kxorko.htmlsi=QtNTOr92v7S4tD5I ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XmM2NzAlrts.htmlsi=VKThJ94HwdWrTqvr Any time you are searching for a topic, just add "Pan The Organizer" at the end and you'll likely find a video on it. For example "winter detailing tips Pan The Organizer" in the RU-vid search bar, and you would have found those. With over 1000 videos on my channel so far, and new ones added twice weekly (Wednesdays and Saturdays), you'll likely always find what you're looking for. Cheers from Montreal !! (It's -14C already here, and we had 30 cm of snow last week. I HATE winter hahaha).

@daviddin8863 7 месяцев назад

I have not tried the boss yet. But i have the other one, a couple cheap ones, and the mtm. I actually use their 3 in 1 ceramic as a drying aid, i put about an ounce into the foam cannon with water and just foam the car rinse and dry. Works great as a ceramic refresh. You should try to get a hold of their new ceramic rinseless.

@PanTheOrganizer 7 месяцев назад

Thanks for sharing David!!

@Scyths1 7 месяцев назад

I use the bigboi pressure washer and they have their own foam cannon so I also opted to use that and it works incredibly well. Plus, I saw 5 other detailing channels were using the same one so they must know something and I'm not going to pretend to be an expert. If it's good enough for their professional job, then it's good enough to wash my car.

@PanTheOrganizer 7 месяцев назад

Oh for sure there are many good foam cannons out there. In fact, most of the ones in my battle videos for foam cannons do well. I haven't tested the Bigboi pressure washers yet. They seem interesting. I do like their Bigboi BlowR dryer that I have.

@P-47D_theJug 7 месяцев назад

I never thought the Mtm was any good the mjjc is my fav. But I am a rinse-less guy now.

@jimodem490 7 месяцев назад

My GG Boss has vertical and horizontal spray that can be changed by rotating the nozzle past the wide open setting.

@georgemicha6756 7 месяцев назад

Hi Pan, it might be interesting at some point to test PH levels on different products, as you said for this snow foam it was PH8, but diluted it goes down a bit closer to 7. Just an off topic one, but it might be cool how different products behave when diluted or even to see their actual PH levels out of the bottle. Great video btw 👏🏻💪🏻

@PanTheOrganizer 7 месяцев назад

Thanks George!

@TheBreakfastLover 7 месяцев назад

ObsessedGarage did just that. Most of the time the pH will change as you'd expect based on dilution, with minor variability. A lot of it has to do with the pH of your water which may vary.

@PanTheOrganizer 7 месяцев назад

Correct. People need to not overthink the pH on dilution. It's never significant, to my knowledge.@@TheBreakfastLover

@vatropav 7 месяцев назад

I use the Griot's Garage Brilliant Finish foam cannon with a Ryobi 1800 PSI 1.2 GPM pressure washer and Adam's Mega Foam, and it works great! The foam cannon reservoir is big enough that I can completely coat my Tesla Model S in foam all in one pass.

@PanTheOrganizer 7 месяцев назад

Yes I think the Brilliant Finish foam cannon is top notch and certainly amazing value for money!

@returnyt9848 2 месяца назад

Hey Pan, I was wondering if I could pair this Griot's Garage BOSS Foam Cannon with my 1100 psi and 1.5 gpm pressure washer? and do I need to use 1.1 to make the foam thicker? Thank you!

@J1Z06 7 месяцев назад

The hose is gone for the season, so I'm in rinseless mode. I'll give one of these a try in 2024/Springtime. Thanks, Pan!

@PanTheOrganizer 7 месяцев назад

Spring can't come quickly enough right?! Have a good day Jay!

@J1Z06 7 месяцев назад

@@PanTheOrganizer Light snow flurries here!! Argh!! I hate it!!!!!

@PanTheOrganizer 7 месяцев назад

You're telling me! It's below freezing here, and we had a mini snow storm that dropped almost 12 inches of snow already this past week. :(@@J1Z06

@J1Z06 7 месяцев назад

@@PanTheOrganizer 12 inches of snow doesn't sound like a mini storm, Pan! Any plans to move to a warmer place in the future?

@gflores7018 7 месяцев назад

I also like my mjjc if my mjcc breaks down on me. I will try the boss from cannon. Thank you for the video

@PanTheOrganizer 7 месяцев назад

Thanks! Which exact MJJC model do you have?

@RightChange1 7 месяцев назад

Hi Pan! Just a little feedback. I purchased the Griot's Garage 51185, and used it a few times. The top appears to screw on tight, but the side to side motion causes the top to come off. Very frustrating watching the product and hit the floor, but that's ok. I'm going to try another Cannon, and as usual, thanks for the best channel on Social Media.

@PanTheOrganizer 6 месяцев назад

Thanks!

@joevanseeters2873 7 месяцев назад

I absolutely love my BOSS Foam Cannon. I've had mine for over two years and it has held up very well over that time period. I've still never had to change anything inside the foam cannon or even clean it out. I also use those metering tips quite a bit and attach bottles of product directly to the foam cannon head. The BOSS is the BOSS, THE KING OF THE HILL in terms of foam cannons! Just get one. You won't be disappointed.

@PanTheOrganizer 7 месяцев назад

Hehe yeah it’s great! Thanks for sharing your personal experience Joe!! I hope you are doing well.

@ljgmdad 4 месяца назад

Thanks for your videos! Could I ask, which size orifice should I use (1.1 or 1.25) with an Active 2.0? Much appreciated!

@PanTheOrganizer 4 месяца назад

I would keep the stock orifice 1.25 When you have a good pressure washer no need to swap to a smaller orifice.

@barbouradam 7 месяцев назад

I can never get the little plastic plugs to stay in the bottom of the hose, so I just run without.... Not sure if thats an issues but they never stay in

@Tamale_King 6 месяцев назад

Hey pan can you do a video on tips for fleet washing?

@_DannyG 7 месяцев назад

The Mtm foam canon is still my favorite, just wished it had a larger opening.

@PanTheOrganizer 7 месяцев назад

Hopefully they give the next version a wide mouth for easier pouring of liquids in the container for sure.

@TheSprinterVan 7 месяцев назад

Wow! That foam Cannon checks all the boxes Even boxes I didn't think about😂 Also you gave me a great idea: I need two foam cannons😊 You didn't exactly say that but it's a great excuse to check out that new offering Christmas and Boxing Day is coming!!!!

@PanTheOrganizer 7 месяцев назад

Hehehe yeah it's pretty well engineered. Which features impressed you the most? And which current foam cannon are you using?

@TheSprinterVan 7 месяцев назад

@@PanTheOrganizer using a reasonably priced knockoff from Amazon. It does okay but I can tell by the construction it's not going to last. One feature on the new boss Cannon I love is the weighted pick up tube. I am familiar with that setup using sprayers for insecticide and chemical application and find it quite handy. Also I love the lifetime guarantee as I like to have my equipment last as long as possible. And not have to treat it like a baby. Also the smaller orifice included is nice because I don't have to buy it before I try it it's already there. Manufactured in North America a plus. And a BIG thank you for continuing to put out all the great easy to understand yet comprehensive videos.😮

@PanTheOrganizer 7 месяцев назад

Thanks for the positive feedback about my videos man. Always appreciated!

@dinokarakostas4246 7 месяцев назад

I wonder if the siphon tube with the weighted ball will fit in the MTM foam cannon. I'm also hopeful that MTM will design a new wide mouth bottle, i have two 22.2 cannons. i buy lots of griots merch including their polishers, creeper and soaps.

@S_Paoli 7 месяцев назад

Thanks to Pan the Organizer, I have become a foam addict. 😍 Got a foam question that's puzzling me for a few weeks. I use Adam's Mega Foam with my MJCC(?) foamer. The foam comes out thick and beautiful. I completely cover my car and then wash it... after I rinse it off thoroughly, the foam remains on the driveway and then flows towards the sewer opening by the curb. I have noticed that the white foam was so thick that it remained there for a day or two. The weather was sunny and warm. No, I did not use too much Mega Foam. I put about 1 tablespoonful into the warm water inside the foamer plastic container. So what could be causing the foam to remain outside after almost 2 days?

@PanTheOrganizer 7 месяцев назад

I like that! "Foam addict" hehe!! Yeah there are many snow foams that can be quite thick, and Adam's Mega Foam is for sure one of the thickest producing on the market currently. In my garage, I rinse my floor after the job and the water and chemicals go in the floor drains. So I haven't experienced the foam staying on the ground for 2 days like you have. Perhaps write or call Adam's Polishes and see what they can help you with?

@trd3786 Месяц назад

I am considering picking up the Boss foam cannon but I really like my MJJC foam cannon pro V2. I notice on most of your videos you tend to use MJJC foam cannon. Which do you suggest I purchase. I love thick foam but I would like to get your suggestion. Thanks!

@PanTheOrganizer Месяц назад

Griot’s is the best build quality for sure. But the one I tens to use most nowadays is the newer MJJC Foam Cannon S v3 which I presented here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L-3608MjklU.htmlsi=hHgayhWG4jB4A0ky

@335i101 Месяц назад

Will the boss work fine with the ego pressure washer in turbo mode?

@stevenkono 4 месяца назад

Pan. Thank you for your videos. I've been a weekend warrior for decades but had to stop for few years due to a back injury. Now healed up, I have come back to a whole new world of foam techniques and foam equipment. I watched this video, as well as your great video on the MJJC Pro V2.0 and S V3.0, and your multiple videos praising the MTM PF22.2. I had a comment and a question. Looking at the MTM page, it seems they took some of your advice, and now offer a wide mouth version of the PF22.2. A nice quality of life upgrade. I am strongly considering the Griots Brilliant Finish foam cannon. My concern is the fact that it comes with a 1.1 orifice installed. I've heard you mention several times that a 1.1 size orifice may trigger an overload on a 15 amp breaker, which is what I have in my garage. Do weaker (lower psi, gpm) pressure washers draw less amperage than higher psi, gpm pressure washers? I guess I could buy a kilowatt type device and use the 1.25 orifice first to see the amperage draw, then try the 1.1 orifice and see how much it pulls. I'll be using the Ryobi 1800psi, 1.2 gpm pressure washer that I've seen other detailers mention as a reliable and low priced unit.

@PanTheOrganizer 4 месяца назад

It's a little different with the Griot's Garage Brilliant Finish Foam Cannon. It does come with the 1.1mm orifice pre-installed, but they also supply the 1.25mm orifice. In the case of that specific pressure washer, they only recommend using the 1.25mm orifice for pressure washers exceeding 4000 CU (cleaning units). The 1.1mm orifice they recommend for pressure washers of 1540 to 4000 CU. And cleaning units are measured by gpm x psi. So in the case of your Ryobi, 1.2 gpm X 1800 psi = 2160 cleaning units. Even with my powerful Kranzle pressure washer, it's 2.1 gpm X 1400 psi = 2940 CU so I would keep the 1.1mm orifice for mine. So you would only need to swap to the 1.25mm orifice for high powered GAS pressure washers. Here are their detailed instructions: www.griotsgarage.com/content/pdf/51185.pdf

@stevenkono 4 месяца назад

Pan. Thank you very much for your reply. After I get the foam cannon and use it, I will let you know how much amperage my pressure washer pulls at the wall socket with the 1.1 size orifice that comes installed. I'll also report my results with the Griots Brilliant Finish foam cannon. @@PanTheOrganizer

@FelixBouchardDetail 7 месяцев назад

Hey pan, so if i got this correctly, since the active 2.0 (that i own) have 2gpm, should i use a 1.25mm orifice or the 1.1mm would still give me more foam? I dont think i understood correctly... why use the 1.25 if the 1.1 gives more foam? Thanks!

@PanTheOrganizer 7 месяцев назад

Keep the 1.25 orifice as you have a pressure washer that pumps out a lot of GPM. Using the 1.1 orifice is for weaker pressure washers typically below 1.4 GPM of water output

@P4SDetails 7 месяцев назад

I know people have theirs that they love. The longest lasting ones for me have been super cheap. Just how it has worked out.

@PanTheOrganizer 7 месяцев назад

Yeah what ever works for you no problem there. 👍🏻

@JeanPierreWhite 5 месяцев назад

WHat size orifice do you recommend on the Brilliant Finish with the Active 2.0 pressure washer?

@PanTheOrganizer 5 месяцев назад

The stock one that comes pre-installed.

@bizmofunyuns6463 7 месяцев назад

I use the brilliant finish for brake buster and mjjc pro 2.0 for the rest. Great cannons, also how do you not have the rust garbage in the bottom of the brilliant finish?

@PanTheOrganizer 7 месяцев назад

I have deionized water so I’m guessing that helps with durability of components? Also, as I said in the video, it’s important to rinse out and flish residue out of the foam cannon after each use. So I empty the container, rinse it out, fill it with warm water, run that through the pressure washer for 30 seconds to flush out any chemical residue, then empty the container and let the parts air dry overnight. I always did this with my foam cannons and never had an issue.

@DNightNinja 4 месяца назад

Honestly if you want a boss cannon AND you are new to pressure washing cars and need product get the ENTIRE boss kit. It’s $164 USD comes with the cannon, surface prep, poly gloss, and surface wash liquids, a large edgeless drying towel, and an extra spray bottle. Pretty good value imo if I would have known about this I would have gotten it.

@PanTheOrganizer 4 месяца назад

Thanks for sharing. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@DNightNinja 4 месяца назад

@@PanTheOrganizer just stumbled upon the channel since Ive been watching a lot of obsessed garage lately and have been putting together an entire pressure washing kit for my car and i needed a bit more info on the cannon as to its construction specifically the quick disconnect. Some background here but I recently bought a second hand boss cannon that I had to disassemble COMPLETELY and acid wash because it had rust due to a bad quick disconnect and poor treatment from the previous owner. It will be chrome plated to better protect against corrosion and imo it probably should have been chromed out of the box even if stainless is pretty corrosion resistant. with the amount of action these things see it just makes sense but regardless it will be a pretty unique cannon as I don’t know of any chromed boss cannons and I would probably recommend doing the same to others after my experience but that’s just me. HOWEVER Had I known about this kit I would have gotten it since I already intended to buy a lot of griots products and could have saved myself the trouble and just wanted to let others know.

@TheChemoDoc 2 месяца назад

Side marking are very important to me. Does this have side markings?

@Pierre578 7 месяцев назад

je ne trouve pas l'info si ça monte sur des karsher ?

@GLI_1701 7 месяцев назад

Looks like they're just trying to keep up with the mjjc Pro 2 which is slightly less expensive and the build quality is A1

@MikesAutoDetailing 7 месяцев назад

What a paaaaaaaaantastic video

@PanTheOrganizer 7 месяцев назад

Thanks Mike!! What foam cannon do you for your daily?

@MikesAutoDetailing 7 месяцев назад

@@PanTheOrganizer MJJC Pro V2

@PanTheOrganizer 7 месяцев назад

Pro V2 or S V2?

@MikesAutoDetailing 7 месяцев назад

@@PanTheOrganizer Pro V2

@MikesAutoDetailing 7 месяцев назад

@@PanTheOrganizer you need to try Detail Firm Exterior Lather

@felipe_silve 7 месяцев назад

BOSS seems to have a wider fan pattern than Brilliant Finish. I have the Brilliant Finish and it's great, but the base is not the most stable and too light when empty, it stands upright but tips easily. Wide base of BOSS seems to fix that. My PF22 has been downgraded to Brakebuster wheel dedicated cannon and Brilliant Finish for snow foam. I might get the BOSS for the improved user experience. That way I have dedicated PF22 for Wheels, BF for Alkaline prewash and BOSS for PH neutral snow foam.

@neovisual633 3 месяца назад

Probably not the best question to ask, but do you prefer the Griot's Boss or the MJJC V3? Thanks for the videos they have been very informative and help me a lot!

@PanTheOrganizer 3 месяца назад

For build quality, the BOSS is for sure better. For overall foam output, the MJJC has a slightly better foaming capacity and also is less expensive. Both are very good, you can't go wrong really. They are top tier foam cannons. Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@TripleGAutoDetailing 7 месяцев назад

Nice review Pan. I have several "cheap" foam cannons. I put 1.1 plug in them and they work great with my Active pressure washer. I honestly don't want "shaving cream" results. Nice for videos but not necessary for detailing. Blessings from USA 🇺🇸 GGG 😎

@PanTheOrganizer 7 месяцев назад

Hehe I totally get you!! Thanks for watching!

@TripleGAutoDetailing 7 месяцев назад

Truth be told. My "pre-wash" process gets the car likely 90-95% clean before I even reach for the foam cannon. 😎@@PanTheOrganizer

@PanTheOrganizer 7 месяцев назад

What do you typically do for the pre-wash?

@TripleGAutoDetailing 7 месяцев назад

@PanTheOrganizer Typically - pressure wash 1st then using IK Foam Pro 12 with Meguiars Citrus Power Cleaner Plus 4:1 soak the entire vehicle with foam and let dwell 4 - 5 minutes. Then pressure wash rinse. Chem decon with TarX. Rinse again. Chem decon with IronX. 4th rinse. THEN foam the entire vehicle with Adams Mega Foam, let dwell for a few minutes then proceed with contact wash. 1 bucket - 5 or 6 microfiber mits. Final rinse ✨️

@PanTheOrganizer 7 месяцев назад

I hope you don't use the TarX tar remover on each regular weekly wash? That seems a bit harsh to me hehe. I'm guessing with all the chemicals you listed, those are a lot of steps, you are referring more to a maintenance wash for a customer's vehicle every other month?

@patrickdonahue777 7 месяцев назад

Their new Boss Pressure Washer Gun looks equally amazing

@PanTheOrganizer 7 месяцев назад

If I get enough viewer requests for it, I'll look into that too!

@trifin5772 7 месяцев назад

Regarding the mtm pf22: The narrow opening - it fits other bottles. It’s a standard size. It might not be that used but it might be handy. Also the metal thread is a good thing. Bottles can be replaced easier than the cannon. I know it might require a bit more care but it is correct engineering! Re Griots: No spare parts. Can you buy more bottles with lids? Made in USA AND Taiwan - mmm not sure they can claim to be good company supporting domestic economy…I do agree that someone ought to make a stainless cannon without a dosing knob - make it neater and less failures: Mosmatic!

@PanTheOrganizer 7 месяцев назад

Thanks for sharing, but some of your statements are incorrect. Griot's does have spare parts for the BOSS foam cannon, including replacement bottles here: bit.ly/3uOCs9x They also have a full foam cannon rebuilt kit here: bit.ly/47ZlX9r And the Griot's BOSS has internal threads to which you can screw regular product bottles. For example, I'm able to screw the foam cannon head directly to a bottle of Koch Chemie Gsf. Griot's knows what they're doing. And they have great customer service, as is evident through viewers' comments already. Where I do agree with you, is that I would love to see Mosmatic make a foam cannon! By the way, which foam cannon are you currently using?

@trifin5772 7 месяцев назад

That’s great - I wasn’t aware of the spares or the extra bottle thread. I am a harsh critic sometimes! I have mtm pf22.2 but I am always looking to upgrade. I did want to speak up about the narrow opening and the metal thread as they do have practical thoughts behind them as well as the drawbacks. I think I would prefer a standard narrow neck - it’s not a problem for dilution bottles. I’d like a mosmatic, full stainless, no dosing control, flexible draw with weight, no fan control at all & narrow opening 😮 perfect for my bilt hamber…

@_Answer_ 5 месяцев назад

Hey Pan! I often hear that when using prewash foams (let's say Carpro Lift), we should always "neutralize" the prewash with a ph neutral mechanical wash after. Is that's just marketing so we get more stuff from the companies or actually really needed? I mean, lots of water rinsing wouldn't neutralize the prewash also? I've always done it, but being winter in Quebec, just a quick non contact wash sometimes would be nice when it's warmer outside. I'd like to hear your opinion on that! Thx!!

@PanTheOrganizer 5 месяцев назад

Once you do the prewash with a foam cannon, you should always follow up with a contact wash. Not only to neutralize a stronger prewash soap, but also more importantly to actually fully clean the surface. The prewash can only do so much. It’s made to remove the bulk of dirt and reduce chances of swirls and scratches during the contact wash.

@kevinderenzis7193 4 месяца назад

Pan, you never talked about the metering tips? Do you use one? I have the active pressure washer

@PanTheOrganizer 4 месяца назад

I don't use the metering tips.

@ceerock8088 4 месяца назад

I prefer this Griots foam cannon over the MTM. I have both. Both are solid 👍

@PanTheOrganizer 4 месяца назад

Thanks for watching. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ceerock8088 4 месяца назад

@@PanTheOrganizer been following for years 😂

@PanTheOrganizer 4 месяца назад

Haha good to know!! I don’t remember seeing your username so maybe you don’t comment often? But regardless, thanks for your continued support! It has been quite the ride so far and I still have so many ideas coming up for future content. 💪🏻👍🏻

@dosnglenn 7 месяцев назад

FYI, this foam cannon is made in Taiwan, not the US.

@Ymh69969 2 месяца назад

Liar!! It’s all American made my friends sisters boyfriends cousins girlfriend brothers friends cousins dad works for griots and he said it’s made in USA

@SandS-Mobile-Detailing 7 месяцев назад

You forgot to mention the secondary set of threads that allow you to attach it to most any chemical bottle to possibly spray different mediums through the cannon, although all won’t work it is an interesting feature

@PanTheOrganizer 7 месяцев назад

Yes you are right. I did test that and I was able to screw on the bottle of Koch Chemie Gsf as a viewer asked me to try in the comments. Good point for those who might be interested in that feature.

@SandS-Mobile-Detailing 7 месяцев назад

I apologize I don’t often read the comments

@79blustone 7 месяцев назад

I really like the stainless steel, brass on my MJJC is turning black as the reaction to chemicals is apparent. So, I don't like the filters on my MJJC pro, they 'wear out' too quickly. After a while the foam comes out as a watery mess. If I had a choice now I would certainly be looking at this one, what are the filters like? Also, I have a bottle of Gfx here in the UK, after K.C announced only 3000 bottles of Gfx made only for the US. Loads of places selling it here in the UK too

@PanTheOrganizer 7 месяцев назад

They make rebuild kits for it, check the links in the description. :)

@DMUSA536 7 месяцев назад

I thought the brilliant was a little thicker foam and a little less run off.

@PanTheOrganizer 7 месяцев назад

That's another excellent foam cannon.

@adamlyman8293 7 месяцев назад

How much diluted foam cannon solution (oz or ml) are typically needed for one average vehicle (sedan/small SUV) ?? I watched further in your video; you answered my question. You mention using about half of the container (half of 33.4 oz). :)

@PanTheOrganizer 7 месяцев назад

I typically prepare a 22 oz solution

@kcalvillo1987 5 месяцев назад

Hi Pan! What hose do you use for your gun? Looking for a good hose with no kink. Thanks! 😊

@PanTheOrganizer 5 месяцев назад

The stock hose that came with my high end Kranzle pressure washer.

@kcalvillo1987 5 месяцев назад

@@PanTheOrganizer would you recommend one for a lower end gun? 😂 still beginner level.

@dragonstalk86 7 месяцев назад

the pro move is to buy a cheap wide neck one with the right nozzle features then swap out the orifice for a 1/1.1mm, swap out the filter media, then do the other water tricks for moar foam

@PanTheOrganizer 7 месяцев назад

What foam cannon are you currently using?

@dragonstalk86 7 месяцев назад

@@PanTheOrganizer YeewayVeh Foam Cannon; cheapo chinese brand, but once the parts are swapped its great

@coreymerritt7742 7 месяцев назад

Very decent foam cannon pan are you going to do a mjjc comparison thanks good video

@PanTheOrganizer 7 месяцев назад

I have already covered the MJJC foams cannons in previous videos, so I don't see the need to again, but if viewers want to set yet another foam cannon battle video, I'll look into it as those are always popular. What's your current foam cannon?

@coreymerritt7742 7 месяцев назад

@@PanTheOrganizer I as well have the mjjc and a cheaper Amazon one I use for cleaning the house and the roof thanks pan as always great video 👍

@PanTheOrganizer 7 месяцев назад

Thanks Corey!!

@JohnD0129 6 месяцев назад

What’s a good foam cannon for my current pressure washer is 1.2gpm 2,000 psi ?? I’ve notice a lot of these foam cannons recommend min 1.8gpm ??

@PanTheOrganizer 6 месяцев назад

You can still use them, just swap for the smaller 1.1mm orifice they supply with the foam cannon. Those will help for pressure washers with a water flow under 1.5 gpm Of course don’t expect the same level of foam as my higher end Kranzle pressure washer that pumps out 2.1 gpm. And I use deionized water which is the best for getting max foam and suds.

@JohnD0129 6 месяцев назад

@@PanTheOrganizer which one would you recommend for my current Pressure Washer ?

@PanTheOrganizer 6 месяцев назад

See my battle of foam cannons: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wF5pDPE7vr0.htmlsi=s52SSEWBq0geGpMY You can’t go wrong with any of those in that video. It’s personal taste on which features appeal to you and price point.

@nynomadfjc3907 4 месяца назад

any change you could do a demo on foam cannons with different flow rates from 1.3 GPM all the way up to max?

@PanTheOrganizer 4 месяца назад

I don't have a low flow pressure washer. Mine is 2.1 gpm. If you have a pressure washer below 1.4 gpm, try seeing if the stock orifice works (1.25mm) and if you want more foam, switch to the included 1.1mm orifice.

@acedavis9689 7 месяцев назад

Were the metering tips used with either Griots cannons?

@PanTheOrganizer 7 месяцев назад

No. I said in the video I don’t use metering tips.

@LEWD98 7 месяцев назад

I bought an MJJC Pro V2 from dtlrsupply and that thing puts out tons of foam with Adams Mega Foam solution. Using a cheap Harbor Freight Pittsburgh pressure washer too.

@PanTheOrganizer 7 месяцев назад

Yeah the MJJC Foam Cannon Pro V2 and S V3.0 are some of the foam cannons that produce the most foam. They work great!

@amoni1959 2 месяца назад

This was my fav foam canon until the balls rusted out. I was shocked to learn it wasn’t SS. Very disappointing 😢. Replaced it with an MJJC.

@chriscuthbertson Месяц назад

Without adjusting the dilution for the water throughput of each cannon this is not a fair comparison. Potentially the MTM just flows water at a higher rate, with a slightly stronger dilution it may produce comparable results. All foam cannon comparisons should be done with equal panel impact ratio.