@@OllieTalksAirsoft mad, I come through bexley on a daily getting into London. Small world it is. Out of all the people you finally tipped me over the edge to get an MWS, and dump we tech once and for all lol Keep the knowledge coming bud 👌 👍
Excellent info! I had the bolt setup already, so I added the spacers to short stroke and used my TM mags with the AMG HOV and Guarder airtight rubber. Watched this and then it took 2 minutes to get insane speed! Wow, I gotta find the chrono... Thanks for all the great info and demonstrations!
@@OllieTalksAirsoft I'm excited to see what your Bucking experiment shows. you listed so many buckings I couldn't remember them all. I've used the Maple Leaf and Modify buckings and am not happy with either.
Nice! I would definitely recommend though to stay away from the MWS drum mags. They are incredibly hit and miss with regards to the loading mechanism inside. I've heard of many of them breaking very quickly, including mine. Also, if you use them with green gas, it's incredibly wasteful and will kill your efficiency and introduce a lot of cooldown.
If you HPA the gun using a mag well adapter, you could run MP5 mid or high caps. It’s probably more reliable than a drum mag. But you could HPA tap the drum mag… if it’s a reliable one
Do you have a link towards the 'high speed nozzle' ? I cannot find the right one. Would be a great help :). Or better yet: Can you make a part list of the stuff you've used in here? I would like to make a similiar build on my MWS.
Tyvm for this video. My 1st gbb is the kwa mp7. But I finally bought the tm m4a1 mws last year. I haven't done anything to it because I was unsure what I could do to mine. I'm wondering if there is way to get a list of all the parts, not mags, used to make your mws 20 rps? And how much you actually buffered? I'm looking to to the work myself. I'll try my hand at gbb, but for now any aeg rifles I bring to my local shop. Any info you give will be greatly appreciated. Thank you for your time.
You are actually building an MG42 lol. Have you seen the SP system super high-speed bolt? I don't know how heavy that bolt is, but in its demonstration video released by the SP system, it looks really fast. It even drilled two holes on the bolt, that could allow the gas exhaust out when it's halfway cycling, which meant the nozzle could pick up a round reliably. You might try this method on your F1 bolt as well, I guess it could bring the ROF even higher.
Ive not seen it but I will check it out, thanks for letting me know! I was thinking about drilling the holes in one of my bolts to add more realism but wasn't sure how it would affect the performance as they aren't cheap so ill definitely have a look into this. thank you 😁
hey Ollie, thx for your vids, huge help to a new MWSer, just wanna ask if there is any other bolt is under 100g ? bcs I cant find any F1 in Europe. thx.
Hey Ollie, I've got a mtr G editition I bought second hand. Where would you start with upgrading the internals. Running Propane instead of green gas and want to get it to to where it kicks hard and shoots fast. Where would you start?
Hi i have a question about my stock tm MK18 so i run a stock mk18 but the nozzle wont stick in the barrel if i have no mag in it an was wondering what could cause this? (sorry for the bad spelling got dyslexia)
Hey bud, thanks for the great content! I've been looking at getting the angery gnu high speed bcg (no g&p in stock anywhere uk side :/ ) how did it fair up over the stock bolt? Did the steel hammer reset hold up? Cheers!
personally id be looking overseas to get what you want. AG bolts have a few horror stories attached to them but they are complete which is nice, the power adjustment on them is iffy at best but easy enough to replace the internals of the bolt. id be more likely to go for an Iron Airsoft lightweight from shootercbgear in Hong Kong or a HAO directly from them in Taiwan, Angry Gnu are just not that good. but if you need it like this week and have to order from the UK it will work but its not as drop in as you would hope, my friend Alex brought 2 and I think only 1 is working properly so that's 50%, a risk. but complete, its a tightrope buddy!!
@@OllieTalksAirsoft thanks ollie, I was only going to get the bolt and swap out the internals anyway with the reinforced nozzle, ratech or g&p npas ect. Have you tried the orga bolts at all?
@@OllieTalksAirsoft I wonder how many people you've convinced to buy an mws, mine just came in a few days ago from fire support which included a 3 spare mags, and i got the last one in stock!
Hey Ollie! I’m new to mws platform. I was wondering if you would go with a guns modify mws or a stock tm mws if they were around the same price? Any help would be grateful! Thanks!
Personally I'd go with the stock one, they're so good out of the box and you'll have a world of support with RU-vid and the TM discord group. The Guns Modify versions are cool but I'd go for the full TM experience and get one from new. If the GM was cheaper then I'd probably go for that instead but for the same money standard TM is better then the best AEG you've ever fired!
Hello, please I have a question for you. I have a Tokyo Marui MWS with standard recoil and I want to put a red dot sight. Do you recommend a real one or a copy? I saw a real one in a gun store, it's a Vector Red Dot Omega 8 Reticle/SCRD-04. Thank you very much.
It all depends on what you want and how much you play, if it's a lot you want to go for something with a warranty on it, if it's just for backyard plinking then a cheaper optic will usually stand up fine to Airsoft recoil
Hey Ollie Great video, as always. I have a question for you. I have a Volante Airsoft nozzle just like you. But I prefer a high speed bolt setup, but the Volante nozzle only fit in my stock bolt and not the lightweight AG one I have. So, was wondering what bolt you use yours in and if you know of any lightweigth bolts that will take the Volante nozzle, so that I don't have to waste my money? And have you changed the valve in the Volante nozzle, if so, to what?
Sleeper is right I'm using the MWC bolt, I've not tested it in the other BCG's but I can. Other than the nozzle return spring being GM I'm using the volante nozzle with their rocket valve and rocket valve spring.
@@OllieTalksAirsoft when you say their rocket valve and rocket valve spring, you mean the units delivered with the nozzle itself from Volante? And should you find the time to test, in which bolts the Volante nozzle fits, that would be awesome. Also what brand would you recommend for a lightweight bolt?
Hi again, stupid question maybe but this spring i think it's from the rear like the big spring that devolpe recoil has a rattling noise in my brothers mk18, is there a way to make it go away? I think it has increased a little bit over time, almost as an old bed (wring wring)
probably the best setup for that balance is the stock setup, heavier bolt and lighter buffer. you could add some extra weight to the back of the bolt like the HAO steel extension and use the stock buffer and you'll get a bit more recoil but the ROF won't fall too much.
Dytac are usually pretty decent but if HAO made one then that will be the best. Also the MK4 was one of the only rails to be made in "federal" green, it's a cool look and pretty different. Check places like JKarmy and wgcshop as they're most likely to have them , shipping to the UK usually isn't too bad either.
No buffer will reduce the FPS as the BB is fired before the gun recoils, you will need to look at one of the following; the rocket valve, rocket valve spring, gas you're using, inner barrel length and inner barrel diameter.
Salut superbe vidéo !! Je n’ai pas compris d’où proviennent les tempons violet ? Il est possible de les utiliser avec un buffer d’origine ? Merci pour tes réponses !! Le bonjour de France !!
I think you'll need to be looking for a 250mm as that's the stock and cqbr length which is 10.3 inches. You'll need a GBB/VSR cut window inner barrel too.
Allthough i got my MWS into an DDM4v7, im still jealous of you guys having Full-Auto ;_; aint possible over here in Germany....shooting an MP7 in Single is boring xD its MADE for being shot in Full...damn laws.
Re-watching this - during the slowdown video, I noticed that the mags tend to wobble about a bit (never noticed before) - can that cause performance issues?
@@OllieTalksAirsoft i search and read a lot and all reviews from angry gun high speed , (i heared all bad opinions)are from years ago , i hope the AG guys fix the issues from years ago..
@@OllieTalksAirsoft i lookimg for short stroking now , you recomended some one? btw the nozzle return spring 130%g&p is good choche too to improve BCG?
the hand guard is a real Geissele Mk2 Mod1 9" the gas block is a repro BCM I believe, im using guns modify p mags mostly as they're the best aftermarket
@@OllieTalksAirsoft i just bought original pts handguard , and boe i need a gas blck too hahah i think i use the new gen pmags with visible bullets effect