Тёмный

The Ultimate Honda CR250 2 Stroke Engine Build 

Kincade Pavich
Подписаться 118 тыс.
Просмотров 202 тыс.
50% 1

Enter to win the CR250: kincadepavich.com/win/2023-ho...
In this episode of the CR250 build I assemble the engine tons of great new components. If you want to see me Cerakote the cases and install the crank and transmission, check out the previous episode here: • I Cerakoted These CR25...
Thank you all for the continued support on this series!
Follow me on other social media:
Instagram: / kincadepavich
TikTok: / kincadepavich
LINKS AND PRODUCTS DISCUSSED:
WISECO (KP10 for 10% off): www.wiseco.com/powersports-home/
This build is utilizing tons of great new parts from Wiseco including a crankshaft, bearings, seals, gaskets, clutch pack, and piston. Wiseco offers tons of quality engine components. You can use the code "KP10" for 10% off your order at Wiseco!
MILLENNIUM TECHNOLOGIES: millennium-technologies.com
Millennium took my nasty, scored, damaged old CR250 cylinder and brought it back to life. I would highly recommend their services!
PHATHEAD RACING: phatheadracing.com
Luke absolutely crushed it on this custom laser etched cylinder head for the CR250. With interchangeable domes to change the characteristics of your bike, a Phathead is a solid upgrade to your 2 stroke.
SMARTCARB: smartcarbfuelsystems.com/
We will go much more in-depth on this carb in a future episode, but I am thrilled to be working with them on this build. Smart Carb adjusts to altitude and increases power.
PROX: www.prymemx.com/?ref=kincade
Thanks to ProX for providing the water pump rebuild kit! You can find tons of ProX parts over at Pryme.
STUCK NUTZ (KP10 for 10% off): stuck-nutz.com/
A thread locker committed to supporting trails so that we can enjoy them for many years to come. Use the code "KP10" for 10% off.
FAST METRIC: fastmetricfasteners.com
I've been using these kits on all of my builds for years now. It is such an easy way to complete revamp the look of your bike with shiny new hardware. The way kits come separated and labelled makes installation easy.
DIRT TRICKS: dirttricks.com
Best sprockets around! Wait till you see the rear...
PRYME MX: www.prymemx.com/?ref=kincade
The cleaning wheels I used to polish up the kickstarter as well as other bolts and components are essential to any bike build!
Want to support the channel? Bookmark this affiliate link to make your purchases on MotoSport:
Music from Epidemic Sounds:
High Tech by Rocket Jr
Masenko by Sugoi
Chapters:
0:00: A wandering mind
0:23: Bottom end assembly
2:30: This song ends soon
2:55: Replated cylinder
3:33: Top end assembly
4:00: New hardware
4:40: Kickstarter rebuild
5:28: Reeds and SmartCarb
6:30: Glamour shots
7:04: Engine discussion
7:40: Stuck Nutz winners

Авто/Мото

Опубликовано:

 

7 авг 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 159   
@KincadePavich
@KincadePavich 11 месяцев назад
I hope you guys enjoy the engine build! If you'd like to support the build, you can enter for a chance to win here! kincadepavich.com/win/2023-honda-cr250/
@Sir_Wilo
@Sir_Wilo 11 месяцев назад
The website is nit working
@KincadePavich
@KincadePavich 11 месяцев назад
@@Sir_Wilo what’s going on with it?
@andreazanotti9818
@andreazanotti9818 11 месяцев назад
È possibile installarlo sulla Honda NSR 125 con tutto l impianto elettrico funzionante?
@wernerxldata
@wernerxldata 11 месяцев назад
Really nice motor build. I actually like the original type bolts from Honda more, even use them in KTM's 😂 What template engine is this in the first few seconds of the video ?
@Sir_Wilo
@Sir_Wilo 11 месяцев назад
@@KincadePavich ok now its working. Was giving me an error before
@stsid1
@stsid1 11 месяцев назад
Motor looks great and glad to see someone use a torque wrench.
@SlimThug78
@SlimThug78 11 месяцев назад
Kincade you are an absolute legend! Your build/revival series gave me the motivation to start reviving my 1993 yz250. My dad got it for me when I was a kid and it was absolutely ragged out, like rear fender zip tied on ragged out. A few years ago my grandfather rebuilt the engine for me and one day while riding it, it bogged out and never started back. I determined that it wasn't getting spark and all of the 30 year old electronics had been shot. I've replaced the ignition coil, stator, and spark plug and still no spark, I'm putting on a new CDI box today and hoping for the best. Once I get it running I'm hoping to get a few hours on it before I start the build. I found a forum linking a 1993 Damon Bradshaw replica graphics kit as well as the old factory frame color code and I also have a full UFO plastics kit lined up. The guy who had it before me already threw on a full Pro Circuit exhaust and forks as well as Pro Taper bars but it's probably going to need the forks rebuilt and the linkages/bearings serviced as well as the silencer repacked before I take it to the track. Thanks for docuumenting all of your work, I've been learning everything I need to get this bike revived!
@KincadePavich
@KincadePavich 11 месяцев назад
That’s so awesome man! Best of luck with the build!
@JBZofficial812
@JBZofficial812 Месяц назад
Thumbnail is eye-catching, BEAUTIFUL little engine, youre an artist brother.
@pranupranav5563
@pranupranav5563 4 месяца назад
Bro gave me motivation to work.
@VincentPagee
@VincentPagee 11 месяцев назад
This is gonna be your best build yet KP!! Love watching you and learning from you!!
@KincadePavich
@KincadePavich 11 месяцев назад
Much appreciated!
@RonnieMacJr69
@RonnieMacJr69 11 месяцев назад
Good looking engine. Looking forward to dyno mine once it’s finished, hopefully break into the 55hp+ club. That’s all I can expect while retaining a mx fitted expansion chamber.
@eamh2002
@eamh2002 11 месяцев назад
I know many might not pay attention BUT big thumbs up for Millenium for relieving the exhaust ridge area. Many dont do it :)
@martycech5844
@martycech5844 11 месяцев назад
Beautiful Build… Thank You for sharing!
@TORKiT
@TORKiT 11 месяцев назад
I do think those bolt kits are super handy. Nice motor!
@sakisSAVAGER
@sakisSAVAGER 11 месяцев назад
That's a great build! Hello from Greece 🇬🇷 💙
@Weirdhourmoto
@Weirdhourmoto 11 месяцев назад
Keeps getting better and better!!
@JohanFasth
@JohanFasth 11 месяцев назад
That's a beauty! Well done, Sir!
@matthewtomlinson9476
@matthewtomlinson9476 11 месяцев назад
That carb is sick! Looks almost like it's fuel injected! Smart carb 🤔 mhmm interesting. Need more Budd awesome job. Great work!!
@jordanorozco7505
@jordanorozco7505 11 месяцев назад
Sheeeshh, KP that engine looks too fresh. Your a pro bro💪💪👍👍
@gus9272
@gus9272 11 месяцев назад
Awesome!!!! Man you are killing it.
@Adideva01
@Adideva01 11 месяцев назад
W😎W! That engine is a beauty. Thanxs for keeping the 2T ALIVE! 👍
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks a ton!
@ruanstrydom6471
@ruanstrydom6471 11 месяцев назад
Kincade! Well done Bruh!
@ivarjohansson256
@ivarjohansson256 11 месяцев назад
loved the vid man keep uploading cant wait for next part
@nathanvanlieshout7834
@nathanvanlieshout7834 10 месяцев назад
I used a phathead cylinder head on my 2007 CR134 many years ago and could not get it to seal properly and destroyed a couple pistons from coolant getting into the cylinder. Went back to a standard head and no more issues. Ahh, I miss that bike.
@KincadePavich
@KincadePavich 10 месяцев назад
Bummer! I wonder if you had some damage or imperfections on top of the cylinder.
@ODRoach
@ODRoach 11 месяцев назад
Crazy how quick this is coming together!! Love it and great job Sir!
@bigrich7026
@bigrich7026 11 месяцев назад
Me too can't wait to see you on the dyno..my 2001 cr250 makes 65hp on c12. To the tire. I'm sure your gonna blow me away😅!
@johnlastname2895
@johnlastname2895 11 месяцев назад
250 - 2 stroke 65hp to the tire.........lmao um no
@jay-14
@jay-14 11 месяцев назад
so clean bro 🔥
@adambatchelder4121
@adambatchelder4121 11 месяцев назад
Good job making it pretty. Now those studs and sleeves need Greece or anti seize to keep them from sticking next time. The paper case gaskets need to be coated with grease to keep them from sticking. Vertex pistions are much less likely to stick than the wisco. Squish , thats pistion to head clearance should always be checked especially when using aftermarket parts. Last the smart carb. Well set it rich out of the box and work your self leaner as you go . They are still a carburetor and no Matter who tells you they are completely self-adjusting for altitude and temperature they are not
@harrypeterson9287
@harrypeterson9287 11 месяцев назад
Definitely agree on the last part big time. Too bad they don't make simple closed loop EFI systems with a screw that can adjust in increments of 250 feet of elevation per click with an arrow pointing to a dial between 0K and 8K. There you go, unless you're riding in the depths of hell or hill climbing Everest you're covered. No more guess work and testing required. People whine about EFI being complicated and impossible to work on. Those same people are working on their carb AT LEAST once every season to keep it running right.
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks for the feedback!
@MrAlternation
@MrAlternation 11 месяцев назад
GOOD WORK!
@kinangeagle133
@kinangeagle133 11 месяцев назад
So thats how you afford all these bike stuff
@w1llu
@w1llu 11 месяцев назад
How?
@jackoostinjen5387
@jackoostinjen5387 11 месяцев назад
Codes like a pro
@MaxFitnessExperiance
@MaxFitnessExperiance 11 месяцев назад
@@w1llucoding don’t know if he has a job as a web dev or something similar but it pays really well😂
@lilspunkey
@lilspunkey 11 месяцев назад
Great work
@andreacioni1271
@andreacioni1271 11 месяцев назад
Cr 250.. il mio tesorooo!!
@mxrevival
@mxrevival 11 месяцев назад
“CODING SUCKS, I’M GOING ENGINE-BUILDING‼️” Nice job, KP. I’m about to pop this monster’s frame out of the box and vapor blast it for you & your awesome viewers. 💎
@KincadePavich
@KincadePavich 11 месяцев назад
You're the man Charles! Cannot wait to see you work your magic on that thing.
@superfram81
@superfram81 11 месяцев назад
what a motor nice job sir
@Menniti_129
@Menniti_129 11 месяцев назад
looks sweet!
@josephforcino6399
@josephforcino6399 6 месяцев назад
Does anyone know how much of a difference a fat head would make on bottom end power on 2002 Cr 250.
@sunnyvale104
@sunnyvale104 11 месяцев назад
Awesome work. Do i have to live in the states to enter?
@superscum0311
@superscum0311 6 месяцев назад
Where did you find the motor jig?
@user-iu9fb8ry9f
@user-iu9fb8ry9f 3 месяца назад
Hey man where did u get the red engine components from
@adamsbikebuilds4265
@adamsbikebuilds4265 11 месяцев назад
Satisfying 🔥🔥
@andrewwilson9130
@andrewwilson9130 11 месяцев назад
Sooo SICK!
@geoffmcwiggan2814
@geoffmcwiggan2814 5 месяцев назад
So what’s the outright bhp of a CR 250 with all the go fast parts 👍🥃🇦🇺
@JamesMartin-rb7zr
@JamesMartin-rb7zr 11 месяцев назад
It looks absolutely amazing the red and black are a great combo can’t wait to see the finished bike
@AridersLifeYT
@AridersLifeYT 11 месяцев назад
Beautiful thank you for sharing
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@zardportugal
@zardportugal 11 месяцев назад
Beautiful.
@dwik7648
@dwik7648 10 месяцев назад
Kepingin punya mesin motor seperti itu tapi nasip berkata lain 😊
@iven2430
@iven2430 11 месяцев назад
Love it 😍
@jasonjavelin
@jasonjavelin 11 месяцев назад
Hype to have a chance to win this machine!!! Also: what brand T handles do you have? I like how compact they are. I’m looking at picking up the Tusk racing ones
@KincadePavich
@KincadePavich 11 месяцев назад
They are motion pro! I've got the small tusk 1/4" drive one in my trail pack.
@hanzdeutsche5603
@hanzdeutsche5603 11 месяцев назад
clean build :D
@tomatoknuckles
@tomatoknuckles 11 месяцев назад
Looks bad ass man, awesome work 👌 is the link you posted for fast metric an affiliate link. I'm doing an rm250 myself at the moment and need a kit.
@KincadePavich
@KincadePavich 11 месяцев назад
I do not have an affiliate link with them but would definitely recommend their kits!
@frasermacmannis614
@frasermacmannis614 10 месяцев назад
Do you follow a service manual for knowing what order to do things and and torque specs?
@KincadePavich
@KincadePavich 10 месяцев назад
Not so much for order anymore, I've done enough engines. For torque specs, yes.
@Markonacr250r
@Markonacr250r 11 месяцев назад
2sm has power valve brackets right now
@dennismacwilliams196
@dennismacwilliams196 11 месяцев назад
What can I say... WOW
@alikalany6586
@alikalany6586 10 месяцев назад
bro how u find tutorials of engine torque specs bolts case and gears?? plz help me i want to build mine but there’s nothing about it
@KincadePavich
@KincadePavich 10 месяцев назад
I buy a service manual for every bike I work on!
@domenicomarts6463
@domenicomarts6463 11 месяцев назад
You double gasketed the reed boot to reed cage but no gasket from reed cage to cylinder!!! But beautiful work man! Can’t wait to win this bike!
@KincadePavich
@KincadePavich 11 месяцев назад
There is a gasket behind the reed cage to cylinder as well. Just hard to see in the vid! And double gasket was supplied by VForce for clearance. Thanks man!
@PeakyJammer
@PeakyJammer 11 месяцев назад
Let’s go!!
@mattcollins3572
@mattcollins3572 11 месяцев назад
Impressive
@brianpurvis2407
@brianpurvis2407 11 месяцев назад
awesome Build Really but u gotta use some kind of lubricant anythings better than nothin the chances of it tankin are slim to none but it will prolong the life of the motor
@KincadePavich
@KincadePavich 11 месяцев назад
I did use lubricant. Assembly lube on all the bearings, transmission is caked in oil.
@muffintastedum3444
@muffintastedum3444 11 месяцев назад
Hey bro, I love your videos and I am looking for a pit / dirt bike. Do you have any suggestion my buget is 500-1500.
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you! Tough to find anything nice in that price range, but if you keep your eyes out you could probably find a decent pit bike!
@muffintastedum3444
@muffintastedum3444 11 месяцев назад
@@KincadePavichThanks bro
@user-vr3ke9mr9r
@user-vr3ke9mr9r 11 месяцев назад
Hi what is the polishing wheel you used called?
@KincadePavich
@KincadePavich 11 месяцев назад
They're from Pryme MX: www.prymemx.com/?ref=kincade
@frz_akbar
@frz_akbar 11 месяцев назад
that was me, when i'm frustrated about code, i just move on to my bike 😅
@Beaubrent12
@Beaubrent12 11 месяцев назад
Honestly I feel like a lot of people would agree with me on this one but I think it would be really awesome for you to do a build on a ktm 144.
@Beaubrent12
@Beaubrent12 11 месяцев назад
Sorry I sound kinda like a loser right there but this bike is ganna be awesome and can’t wait for the final product. I learn a ton of stuff from you and honestly just love playing your vids for something to do when I’m bored.
@ghaniapple46
@ghaniapple46 11 месяцев назад
awesome.. 👍👍👍
@paulawestcott7228
@paulawestcott7228 11 месяцев назад
All is a great master piece except the black color on the engine.. Black attack more Sunlight heat this keeps the engine hotter. Silver is the way to go. Have you ever touch a black color car and a silver one under the Sun? Mayor difference of heat retention. Try it!
@OO-mo8mr
@OO-mo8mr 11 месяцев назад
1:59 bearing + hammer = damage to balls
@user-hg8if8ls1k
@user-hg8if8ls1k 11 месяцев назад
Hello, I'm from Brazil and it's difficult to find two-stroke engine parts here, is there a website where I can buy parts in the US?
@KincadePavich
@KincadePavich 11 месяцев назад
I'm not sure who ships to Brazil to tell you the truth!
@user-hg8if8ls1k
@user-hg8if8ls1k 11 месяцев назад
@@KincadePavich OK thanks
@sidecarbod1441
@sidecarbod1441 11 месяцев назад
0:20 one white shoe, one blue shoe?
@zanefernandez8432
@zanefernandez8432 11 месяцев назад
Awesome video what engine stand is that?
@KincadePavich
@KincadePavich 11 месяцев назад
Fly racing! Thank you!
@guillaumebraco3728
@guillaumebraco3728 11 месяцев назад
very nice
@KhingKloudYT
@KhingKloudYT 11 месяцев назад
Yooo Lemme get that Shinko shirt!!!!!
@jessederyke5000
@jessederyke5000 11 месяцев назад
Bike is gunna be so sick. I wish you didn’t put a notched basket in it though. Its okay when i win it it will get a hinson. 😅. Good work man
@KincadePavich
@KincadePavich 11 месяцев назад
I thought long and hard about the basket with the caliber of this build; I know the wear is visible, but it's practically nonexistent in reality. You can certainly see where the plates have rubbed, but the wear is so minimal it can barely catch a fingernail. I don't see this basket negatively affecting clutch performance. If I decide otherwise once we ride it, I'll get a new basket for it.
@jessederyke5000
@jessederyke5000 11 месяцев назад
@@KincadePavich oh man I am just teasing I’ve definitely seen much worse. The bike will be a power house and I’m sure that basket will be un noticed by most riders. I checked all the comments to see if anyone else caught it and they didn’t and honestly I would not have either if i didn’t JUST put a full Hinson in my 450.
@cfb9174
@cfb9174 11 месяцев назад
I thought I was watching an ad in the beginning haha
@KoematCustom
@KoematCustom 11 месяцев назад
Nice engine...
@daveengman7692
@daveengman7692 11 месяцев назад
Is there a certain place you get your tourqe specs
@KincadePavich
@KincadePavich 11 месяцев назад
I have a Haynes service manual for this bike
@jowensedycastillo3531
@jowensedycastillo3531 11 месяцев назад
I have a new OEM pedal shifter on the original package if you want to put the cherry on top of your build!👌🏼
@KincadePavich
@KincadePavich 11 месяцев назад
It just looks like the original OEM shifter?
@jowensedycastillo3531
@jowensedycastillo3531 11 месяцев назад
@@KincadePavich the one that you used will get flimsy after a couple of hours of use the original one will last years and years, when I knew that they had new shifters I went running and I bought one for myself and threw the tusk one that I had to the trash.
@rochellestanley9532
@rochellestanley9532 11 месяцев назад
Sweet
@songkrantv6620
@songkrantv6620 6 месяцев назад
ระบบวาว์ลฝั่งซ้ายหรอ🧐🧐
@michaelnesmith3513
@michaelnesmith3513 11 месяцев назад
May I ask how I can win this bike? Cannot see anything. Thank you, peace Hog
@KincadePavich
@KincadePavich 11 месяцев назад
You can enter to win here! kincadepavich.com/win/2023-honda-cr250
@johnlastname2895
@johnlastname2895 11 месяцев назад
It looked like you installed the gaskets incorrectly on the reed valve
@KincadePavich
@KincadePavich 11 месяцев назад
I don't think so... I put one behind the reeds, and then 2 between the reed cage and intake manifold. Those ones came with the VForce reeds and the instructions said they were to be used as spacers since the VForce sits up a little bit. What do you think is incorrect?
@joshellis6801
@joshellis6801 11 месяцев назад
I love the vids
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks man
@lachlanhatcher9108
@lachlanhatcher9108 11 месяцев назад
4:01 was that a spark flash???
@KincadePavich
@KincadePavich 11 месяцев назад
Whoa! I never even noticed that while editing, but it definitely was haha!
@lachlanhatcher9108
@lachlanhatcher9108 11 месяцев назад
@@KincadePavich Damn, didn't expect a reply from the creator, let alone so soon. Good job on the build and the responsiveness 👍
@TSchaetzka
@TSchaetzka 9 месяцев назад
The shoes🤣🤣
@KincadePavich
@KincadePavich 9 месяцев назад
Hahaha glad you noticed!!
@TSchaetzka
@TSchaetzka 9 месяцев назад
I had to go back to make sure!
@PeckedToDeathByADuck
@PeckedToDeathByADuck 11 месяцев назад
Seriously, who would want to sit doing coding when there's such a beautiful engine to work on 😂
@onenessseeker5683
@onenessseeker5683 10 месяцев назад
Go grab a mop son
@chamelarrogante351
@chamelarrogante351 11 месяцев назад
As always your builds are mind blowing..i hope it doesn't blow up..hehe
@user-ms5en8hj1h
@user-ms5en8hj1h 11 месяцев назад
Ашшалеть сколько там hp-шек?
@WojySmokes
@WojySmokes 11 месяцев назад
Are you a developer? Front end?
@KincadePavich
@KincadePavich 11 месяцев назад
I was a full time web developer, some front end some back end. Now I do freelance and dirt bikes.
@WojySmokes
@WojySmokes 11 месяцев назад
THat's interesting, you would think you were a mechanic by your channel hahaha. Nice man it's always kool to find out someone has another side to them. @@KincadePavich
@stfsub7503
@stfsub7503 5 месяцев назад
🤩
@user-hg8if8ls1k
@user-hg8if8ls1k 11 месяцев назад
*USA
@moneyontrees6
@moneyontrees6 11 месяцев назад
2001
@christopheramoroso6801
@christopheramoroso6801 11 месяцев назад
Tap and die 30inches off cylinder head but build is great 😅
@KincadePavich
@KincadePavich 11 месяцев назад
What about a tap and die?
@joshellis6801
@joshellis6801 10 месяцев назад
What do u mean???
@ottokirk2325
@ottokirk2325 11 месяцев назад
The new STIC Super X2 carb I installed is about as potent as you can make that 250. It's nearly impossible to imagine until you experience it. It's more like you had the best tuner both port for low end and top end. Which they can't do, BTW. There doesn't need to be any engine mods, nor race gas. Tho. you can run 93 pump on a 125 98 octane spec head...no detonation issues. I previously ran the STIC metering block. As potent as it is, it was only part of the total design of the new cast carb. On my 200SX I run a Keihin 200 main and an 80 pilot jet. These are huge compared to stock 175/45 jets. The pilot circuit actually reverses flow above the idle range and introduces air/fuel vapor just above the main. Vapor is sourced from the carb bell and venturi via passages. I use a G2 throttle cam #400(mud conditions) just so I can control the mayhem.
@PNW_MX222
@PNW_MX222 5 месяцев назад
Two different shoes?!
@KincadePavich
@KincadePavich 5 месяцев назад
Heheh twas a joke to see who would notice
@PNW_MX222
@PNW_MX222 5 месяцев назад
@@KincadePavichlol
@Frisky_FZR
@Frisky_FZR 11 месяцев назад
4:01 😂 🤷🏻‍♂️
@adyettaboci906
@adyettaboci906 11 месяцев назад
Mustahil aku yang menang,tidak mungkin😂😂😂
@stephendexter5111
@stephendexter5111 11 месяцев назад
I love you
@thedrunkendreamer
@thedrunkendreamer 11 месяцев назад
This was the most sexual video I've seen of a motorcycle engine. I love it!
@greggfuller2220
@greggfuller2220 11 месяцев назад
KP are you sporting mismatched shoes because you've destroyed your right shoe on high compression kick starts?! PS, I dress the same way due to the same problem. What dirt bike owners haven't, though?
@jacksonlott925
@jacksonlott925 11 месяцев назад
Two different shoes lol
@KincadePavich
@KincadePavich 11 месяцев назад
First person to notice lol
@dirtbiker2013
@dirtbiker2013 6 месяцев назад
How come you don’t talk anymore
@merkel2750
@merkel2750 11 месяцев назад
Just casually hammering in a bearing without a driver or socket🙄🙄🙄
@johncolossalhimself
@johncolossalhimself 11 месяцев назад
I was thinking the same
@KincadePavich
@KincadePavich 11 месяцев назад
Yaaaaa, bearing was frozen, case was warm, almost slid in by hand. She just needed a small taparoo. But you're correct, not good practice.
@bve7397
@bve7397 11 месяцев назад
Wait you do coding?
@KincadePavich
@KincadePavich 11 месяцев назад
Yep! I was a full time web developer for 4 years
@grahamchilds821
@grahamchilds821 11 месяцев назад
That is beauty
@tinolino58
@tinolino58 11 месяцев назад
Boring
@KincadePavich
@KincadePavich 11 месяцев назад
Cool
@julianlaustsen1991
@julianlaustsen1991 11 месяцев назад
this engine is no good, last good was 2001.
Далее
2003 cr125 Bottom End engine Rebuild Part 1
28:24
Просмотров 135 тыс.
Honda CR250 Full Restoration - Part 8 - The Engine
16:52
If Honda Made a Works Edition 2 Stroke...
14:58
Просмотров 57 тыс.
Building My CR250 Engine!
19:10
Просмотров 580 тыс.
The Fastest and Most Powerful Motorized Bike Engine
9:20
Upgrading the CR250 Build to Be Better Than New!
14:06
Starting the 2023 CR250 Two Stroke for the FIRST TIME!
14:01
Legendary 1986 Honda CR500 2 Stroke Engine Build!!
9:25
Honda CR250R Off-Road Bike Build
11:34
Просмотров 297 тыс.