The Worst Welds We've EVER Seen

Подписаться 55 тыс.

Просмотров 8 тыс.

50% 1

PATREON: / liftarcstudios
STORE: liftarcstudios.myshopify.com/
DISCORD: / discord
Welcome back to Lift Arc Studios! Today, we're tackling the challenge of removing and fixing some of the worst welds we've ever seen on aluminum, specifically on a glass transportation truck. Using the HTP Pro Pulse 220 MIG welder, we'll start by carefully grinding and chipping away the defective welds to expose clean, bare metal. We even went as far as to cut new aluminum channel to attach to the truck body.
With the old welds removed, we can utilize the HTP Pro Pulse 220 to lay down new aluminum welds with the MIG gun. By the end of the process, the truck will have strong, aesthetically pleasing welds, ensuring it can safely transport glass without risk of failure. We even spoke to the young gentleman who did the original welds and we're happy to say he's improved since doing these particular welds. Stay tuned to see the transformation!
Affiliate Links:
Creality K1 3D Printer: shrsl.com/4aeag
HyperPLA Filament: shrsl.com/4aeam
Main Creality Store: shareasale.com/r.cfm?b=201599...
VEVOR Forklift Hook: s.vevor.com/bfQG8g
VEVOR Magnet Lifter: s.vevor.com/bfQG79
VEVOR 210 TIG Welder: s.vevor.com/bfP8wm
VEVOR 2 x 82inch Belt Grinder: s.vevor.com/bfQpUi
VEVOR Magnetic Drill: s.vevor.com/bfP5rg
VEVOR 132lb Blacksmith Anvil: s.vevor.com/bfQp6P
VEVOR Stick Welder: s.vevor.com/bfQfUp
VEVOR Welding Helmet: s.vevor.com/bfQfUv
VEVOR Lift Electric Hoist: s.vevor.com/bfP95c
VEVOR Rolling Garage Stool: s.vevor.com/bfP95u
Amazon:
Milwaukee Compact Mag Level: amzn.to/3RGiV2C
Huth Ben Pearson Bender: amzn.to/3vdwRcV
Everlast 161 Tig Welder: amzn.to/4az2q13
Strong Hand Tools Magnetic Square: amzn.to/3RUMoaq
Pneumatic Mini Belt Sander: amzn.to/479OkQZ
Magswitch Magnetic Welding Ground: amzn.to/47jOl4G
Bosch Laser Measure: amzn.to/3TE0yho
Icon LED Flashlight: amzn.to/3vheZ0Z
Permanent Magnet Chuck: amzn.to/48cxAtD
Japanese Screw Pliers: amzn.to/3vkBiTo
Thread Detective: amzn.to/41JaXua
Alligator Wrench (Modern): amzn.to/4aFKRMX
Marker: amzn.to/3RJbNTb
Milwaukee Air Tip: amzn.to/3NS2qzv
Thanks for watching!
To inquire about a custom build we can help you bring to life, or to be a sponsor of the channel, shoot Tay an email at: Tay@liftarcstudios.com
Produced & Hosted by: Tay Whiteside
Filmed by: Tay Whiteside and Walker Hooper
Featuring: Aaron Dykstra, Spike Geffert
Edited by: Walker Hooper
Music Licensed from Artlist.io
Be sure to follow Lift Arc Studios on Instagram and Facebook!
@liftarcstudios
Liftarcstudios.com
Any technique or methodology shown in this video is purely for entertainment and informational purposes only. Lift Arc Studios and their associated craftsmen are not liable for any injury or damage to your shop or surrounding areas you man incur while trying to emulate these builds. Remember, be safe, have fun, work smart!

Хобби

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@Kneedeepingore 2 дня назад

Strop dragging, weaving and bobbing. Pushweld aluminium. With a slight angle with the gun/torch

@jonathanfletcher8184 2 дня назад

That’s what I’m here to say

@ATM589 2 дня назад

+1 Push wire pull stick.

@jordanthomas2210 2 дня назад

Best WTF challenge of 2024 appreciate the ending 🤘

@hammer1212 2 дня назад

Push when welding Alum!

@hinrik4 2 дня назад

"Maybe we shouldn't show the company's name" 13 seconds later it's not blurred 😂 13:12

@mrdddeeezzzweldor5039 2 дня назад

Man...one of THOSE jobs you never expect to survive to come to you for repair! I like Aaron's style - I like to wear ear muffs pretty much all the time in my shop. Helps with my concentration and peace of mind!

@skwerlz 2 дня назад

The original welds are what happen when you forget to turn on the gas. As a couple other people mentioned you PUSH aluminum mig, you get way less spatter and it wets in much better. No patterns needed, just pull the trigger and move in a straight line, this stuff freezes faster than 6010.

@Kawika88 День назад

Another training session. This guys take the time to get it right. Thanks guys.

@mercifulcreations3162 2 дня назад

that’s the ole “did it in the rain with a stick and a tractor battery”

@frankc9796 День назад

Very cool that you gave an update on the original welders skill level. 👍

@nekoroms 15 часов назад

sensible person would just decline any practice welds that would go down the road

@baronclime6423 2 дня назад

Here in my local area of south central Kentucky, for a decade or two we were known for our houseboat industry. The hulls and railings were all MIG welded aluminum. Pretty much Miller machines were all used in production with Cobramatic push-pull torches with leads up to around 30 feet. I guess it was to meet expectations of what someone would thing welded aluminum looks like but every visible bead had to be the old stacked dime bead. Lake Lanier in Georgia and Lake Cumberland here in KY are probably the largest collection of boats from all the factories. The economy changed and most of the factories closed. Some merged and now live on as a small conglomerate type thing I guess. I would have loved to have bought some of the equipment from them. It was a good job getting out of high school in the mid to late 90's. Especially on road crew/service. Delivering the boats and spending your summer on the lake was great in the summer. Service jobs were even better and less restrictive. Spent most of the time driving from small job to the next doing service. Good times. I guess the point of this mess is the HTP has some nice features and they are nice machines but are not necessary to MIG aluminum.

@HenningMogensen-fx3mw День назад

I'm not a welder, but even I could see that was a bad weld. So much fun to watch. I was a carpenter and we have a wood that is so hard we use metal-tools to cut it. And I have cut some alu too with woodworking tools

@ghostdog662 День назад

I am glad the old "welds" chipped off with a chisel cleanly.

@ronaldbrown2854 День назад

18:10 “I don’t know what that means”. You are correct sir. 🥃

@Mad-Duk_Machine_Werkes 2 дня назад

You guys arent used to working on Other tradesmens work trucks, OBVIOUSLY - if theyre in the field, and something breaks, they jam a screw in it, drill a hole and pop rivet, chewing gum, spit & Bailing wire, zip ties, etc - Your repair looks good, I would say if you think about the forces on those triangle brackets you welded directly to the new strips, every time they hit the gas at a light in that truck with several hundreds of pounds of GLASS on the racks, those flat plates are going to flex, every time they hit the brakes, they will flex more, the welds are just a flat plate in a T configuration, sideways and will eventually fail again within a year or less- Gussets wouldve helped, also dont use regular plain black socket headed allens face up to catch and fill with rain water, regular hex-head bolts wouldve been fine- it's a work truck, not a race car

@melgross 2 дня назад

Temporary repairs are fine, but this was botched all over. It was more than a point failure and repair. Besides, poor welds are still poor welds no matter when they were made. I agree about the socket screws, unless they were stainless. But there’s no reason to have a little pot to hold water.

@willgallatin2802 День назад

The shop steward that let that out the door should really look into a set of glasses. A new young welder is one thing. A steward not checking their work is quite another. I'm glad to see the young man is working hard to grow his skills.

@nmopzzz 2 дня назад

I dont see any issues here. Compared to some of my welds, these look pretty good. If you just crank the power really high, it will burn through the dirt and grime so you don't really need to clean.

@Urchfab 2 дня назад

Nothing worse than fixing bodge jobs but you got it sorted, good job! Next time use the pulse or double pulse function with hot start and crator fill, 4t trigger mode. You'll be amazed at the results. Cheers.

@MrMertstube 2 дня назад

Always push when mig aluminum for proper gas shielding.

@KZ-yy9pm 2 дня назад

Open up that MR-1 already!

@austinburtch5972 2 дня назад

Yea! Forget welding.... Let's check out the langmuir systems MR-1! Cool video tho.

@JasonAttaway 2 дня назад

For how bad it was y'all did a grate job, not to mention that it was the first time you used a aluminum MiG welder, so for what its worth great job.

@jayc4562 2 дня назад

You can use a teflon liner. I use a MT800 spool gun on a 250 amp ESAB mig master. I see miller has some welders that work good but they are expensive, Not to say ESAB was cheap. What I have is older technology.

@Knautschfriese 2 дня назад

I visit LARP and Medieval Events regularly as a LEather Worker. I often repair Shoes, Leather Belts and Pouches. Small Stuff, but the People I help are really grateful, and I never run out of Beer :-D

@gixxerkid3120 2 дня назад

I have had some pretty bad welds walk through the door of our shop as well, the worst one was a weld that I peeled up with a set of chanel locks, absolutely zero pen.😢 good job fighting trough the pigeon shit...😂😂😂 Chris @ T-Town Welding and Fab.

@ronallen6578 2 дня назад

Tay, I always wondered what happen to you and the crew from Salvage Dogs. Loved that show and was truly sad when it ended. I may just have to check this out. Good luck in your business. Tell everyone at BD hello. Ron

@repairtech9320 2 дня назад

I heard that welder in other videos and with the pulse settings it sounds like a trumpet and welds like magic.

@stevenginnever5343 2 дня назад

Great video, my problem is I was about to buy a spool gun for aluminium. I do like the idea of a short distance from wire spool to tip, to avoid bird nesting. Also being able to use long cable and pipe runs. The mig set up looks great, but I do feel you would be very limited on cable length. Have you tried other spool guns, other than the one you didn't like.

@brodin667 2 дня назад

are we just going to ignore the MR-1 in the box or what??!!!

@melgross 2 дня назад

Yup!

@willsmith1988 День назад

Nice Langmuir MR1 CNC gantry mill

@johnversluis3084 День назад

its cool that you allowed him tell him he to save face he is rooking welder but use 100% argon and not mixed gas

@deepwinter77 2 дня назад

Peter Zila is a wizard a setting mig up for aluminum.

@swenwesselink4500 День назад

Dijkstra did alright welding aluminium but push it and that heating up is always better cos aluminium needs a lot of heat.

@Hu88le 2 дня назад

That’s how professionals do it!

@cedarman211 2 дня назад

Totally bought a shirt!! Happy to help.

@JohnBare747 2 дня назад

Those old weld beads shown at the end looked like aluminum turds! Turds of a weld for sure. Aaron did a great job fixing the mess that was that rack. pre-heating to get a better start is a secret mostly because people are too lazy to bother with it. Out of sight out of mind!

@seabreezecoffeeroasters7994 2 дня назад

Slightly Negative rake blade for the saws for Acrylic and or Aluminum is well worth the $$.

@wvrockcrusher День назад

Push your MIG welds, don't pull. You don't need to weave, but you can use a whip and pause on heavier alum. Use some pulse, enough gas to get a clean weld, and just play around with your machine to find what settings works the best for your situation.

@tomwichman77 2 дня назад

You spent a lot of time ranking on some guy that is just trying to get to his real job. He knew he needed it done right, and when he found you, he ran with it. But huge kudos to him for figuring out how to get to work the next day, in spite of his lack of knowledge in your particular field. I lost a lot of respect for this channel today.

@smokeybeardco 2 дня назад

I’ve had some pretty horrible repair welding come in my shop to get fixed. One time an old cowboy brought in a piece off a crop sprayer to get fixed ( that he welded on I bet 4 times before) and it was by far the worst pigeon shit welding is ever seen. When I was done repairing it I asked him to bring his sprayer to fit the piece back on and I asked him to bring his welder as well…..he asked why he needed to bring his welding machine? …..I said “ cause I’m gonna run it the fuck over with my truck!!!!” He just laughed and has been a repeat customer for years haha. He doesn’t fix anything himself any more. 😅

@TayWhiteside 2 дня назад

amazing!!

@frankconsidine5989 2 дня назад

I had a guy that brought a trailer in that was that bad. I had to charge for redoing of everything

@melgross 2 дня назад

I’ve never seen welds this bad. They just popped off when hit. I don’t know what to call them, calk maybe? I wonder if whoever made these even knew to weld with pure argon and possibly used 75/25?

@zeemanjr День назад

JB Weld would've been better than those original welds if you wanna call them welds.

@PatriotPainter День назад

I don't think those were welds. I think someone tried using those aluminum brazing rods.

@Shadow6a 2 дня назад

Y'all just jealous of those beads and rivets! 👀🤣🤣🤣🤣

@chrisduston9365 2 дня назад

Always push welding ali and increase gas flow.

@greekgods3399 День назад

love it

@Shadow6a 2 дня назад

Those old edges look like a cheap ass concrete screed. 🤷‍♂️

@joshwelch8288 День назад

Yes i did know :)

@joshwelch8288 День назад

If its got slag, let it drag. It doesnt have slag.

@jimlarkin1400 2 дня назад

Carbide tipped wood blabe only

@hlq2action310 2 дня назад

It had no welds, it had brazings.

@melgross 2 дня назад

Not even that. Razing sticks.

@KevinCoding81 2 дня назад

poor aaron

@jimlarkin1400 2 дня назад

yeah bad welds go look at the RV industry the frames on the trailers are questionable

@derekchristofferson4244 2 дня назад

sorry

@dhmetalworks8832 День назад

These videos are really hard for me to watch. Three guys who don’t know how to weld aluminum spending forever setting up a machine from a manual then standing around talking shit about someone else’s work who is likely the customer that did the shitty work lol. Then they stand around forever again trying to decide how to go about the repair. Guys get to work and get it done. This is typical daily shit in a fab shop you don’t need to have a meeting of the minds on how to repair it

@gmacka6333 2 дня назад

You’re making me cringe. STOP dragging the wire. You need a decent push angle upwards of 20° forehand. The push combined with the gas will create a cleaning effect. Dragging or even having a neutral gun angle will put soot all over your finished weld

@jackcollins2344 2 дня назад

as you are cutting the person that welded this project could it been his first attempt ? i would like to see both of you guys first attempt welding this kind of material.

@LiftArcStudios 2 дня назад

If you watch to the end, we ended up talking to the guy who welded this together! He said he thought it was funny and took it on the chin, and indeed he was early in his welding career. As we mentioned, everyone has to start somewhere

@Kami8705 2 дня назад

You shouldn't be doing your first welds in something structural that has to hold weight on a moving vehicle. When you're learning, stick to decorative or at least low speed applications like tractor attachments that aren't going to cause huge issues when it fails. Also, all the rivets and bolts show they knew it wouldn't hold.

@jackcollins2344 2 дня назад

I did watch to the end, but I was thinking you guys should have maybe didn't beat the guy up so bad ... Sorry if I upset you guys... Just my opinion

@LiftArcStudios 2 дня назад

No worries at all! We had a few conversations on if we went too hard, but after talking to the guy we decided it was okay to post. I'm sure our first welds aren't anything pretty either

@jackcollins2344 2 дня назад

No problem and also thank you for your reply... I know my first welds were terrible as well. Take care

@jackcollins2344 2 дня назад

I would be shocked if either one of you guys reply to my question