No video :(

This 2 Stroke Engine Build Did NOT Go as Planned - Yamaha TRI-Z 250 Part 8

Подписаться 237 тыс.

Просмотров 138 тыс.

50% 1

This 2 Stroke Engine Build Did NOT Go as Planned - Yamaha TRI-Z 250 Part 8
#yamaha #2stroke #vintage
Who else has done an engine build that didn't go to plan? What problems did you encounter and have to overcome? Thank you for watching my video 😎 Consider subscribing so you don't miss the finale 🤘
P.S. Corvette content is on the way!
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
JIS Screwdrivers - amzn.to/3OQBl0A
Dead Blow - amzn.to/3Yvo40w
Crank Install Tool - cuts2.com/bIsqd
Maxima Assembly Lube - cuts2.com/olBPp
Yamabond 6B - cuts2.com/pdckL
Blue Loctite - cuts2.com/gzLos
Amazon Red Threadlock - amzn.to/3KEBfXj
Snap ring Pliers - cuts2.com/eJbbO
Needlenose Pliers - amzn.to/3OQ8I3B
Clutch Holding Tool - cuts2.com/ljDzC
Talon Clutch Basket - ebay.us/isZX0P
M18 Sawzall - amzn.to/444ricz
Maxima MTL Oil -
Torque Wrench - amzn.to/3qkGEfn
SPONSORS/COMPANIES I TRUST
⬇️ CUSTOM TRIKES SXS, ATV'S & MORE ⬇️
BVC Offroad - bvcoffroad.com/
⬇️ OEM PARTS, PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperfor... (Mention my name and get 10% off)
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronra...
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersport...
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporbla...
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 433

@MichaelSabo Год назад

Who else has done an engine build that didn't go to plan? What problems did you encounter and have to overcome? Thank you for watching my video 😎 Consider subscribing so you don't miss the finale 🤘 P.S. Corvette content is on the way!

@matthewlittle6940 Год назад

"repaired" my old kawasaki 185 when i was a teen and reused the old timing chain which was stretched. Engine lasted a 2 minute drive then rear tires locked up solid. Had to pick up the rear of the bike and walk in the rest of the way home. Chain snapped and piston met head lol

@MichaelSabo Год назад

@@matthewlittle6940 oh man 😂😂

@nwmotogarage Год назад

I forgot the second Circlip on a YZ250 build for a customer. Thankfully I saw it on the counter before the first start. But that did mean I had to pay for overnight shipping to get a new head gasket (didnt trust the already crushed *new* one I just installed) and apologize to the customer for an extra Day of waiting.

@matthewlittle6940 Год назад

@@nwmotogarage close call, hopefully the customer was understanding.

@nwmotogarage Год назад

@@matthewlittle6940 He was, just appreciated the update instead of being left in the dark

@wennyda Год назад

it’s always a great day when mike uploads

@MichaelSabo Год назад

My maaan, thank you for saying that 🤘👊

@wennyda Год назад

⁠@@MichaelSaboNo problem! every video is worth the wait, keep up the quality vids!

@jz_m1004 Год назад

It is a very good day when he does I love his videos

@Noldimo22 Год назад

@@MichaelSabo waiting for the notification bell to ring from France , big fan of your job and mindset Mike !

@chadramsey8047 11 месяцев назад

@@MichaelSaboi like watching you building these I loved the 250r quad videos with Justin and then kfx450 and Justin had that broke down trx450r but the 250r he had and you had was badass I wouldn't of sold my R for notting I wished I could have bought Justin 310

@jaredpedersen3771 Год назад

Your attention to detail is insane 😢 I love seeing the progress 🙌

@MichaelSabo Год назад

I appreciate that Jared; Hope to see you at the dunes this year!

@southernmtbtrails6382 Год назад

Please put this in a museum & protect it when done. This is an amazing project. So fun. It would be cool if an original designer from Yamaha could see this.

@MichaelSabo Год назад

That would be neat to show the original designer (he might not like the changes though lol.) I do plan to do some dune riding with this but it's one I plan to preserve.

@vintagetrikesandquads4012 Год назад

Funny you found Lani, I used his copper gaskets on my Z too--and other machines. He also has them for the Tecate 3s and 4. The great thing about copper gaskets is that they are excellent at heat transfer, but you can also use them to creep up on a specific squish tolerance. I use copper spray with mine and also anneal them (heat to a glow with a propane torch). It makes the copper softer and helps seal against leaks.

@MichaelSabo Год назад

I found him via 3wheelerworld forums, where I saw a picture of one of his gaskets; pretty awesome that he's making this for several vintage machines! Thank you for the tips; I will definitely be annealing mine.

@njmxjunkie3128 Год назад

53:00 now that’s some high compression baby!!! Let’s go mike. This things gunna be a ripper. Double up the base gaskets and run high proof race gas

@-jeffreybollenbach- Год назад

Dude let's go. Love these hour long engine builds. So fun to just sit down with some popcorn and learn do much about these while listening to Mike throw stuff in the trash can of doom. Love the videos man

@MichaelSabo Год назад

Glad you enjoy these man! Thank you for the feedback 🤘

@ralphvasso7209 Год назад

This is going to be one of the best tri-z ever built!! I can’t wait to see it finished and I’m very excited to see this ripping in the sand!! Awesome build. Thanks for not leaving us hanging at the end lol

@MichaelSabo Год назад

Glad you enjoyed the video man; I'm excited for the sand too!

@Pittsburgh-412 Год назад

You do such an amazing job at showing us how to build these engines that we could literally use your videos as 'how to' videos

@MichaelSabo Год назад

I appreciate that man! There will be a build tutorial on this engine with a lot more info in it as well.

@SOMNIOHM Год назад

*_Great Video!_* _That end transformation is craaazy!_

@MichaelSabo Год назад

Glad you like the transformation man!

@giosansone1457 Год назад

You gotta love it man when everything‘s going smooth and at the last second some crap comes around and slows things down but no worries I know you’ll get it done and it’s gonna look great🦾

@MichaelSabo Год назад

It always seems to happen lol

@LuisDiaz-kg1fy Год назад

The color tone on the motor looks amazing!!!!!!

@Shimy380 Год назад

Hello I'm a young french mecanic and your vids make me learn so much, they are really helpfull and clear to understand even for french, so thank you and keep going.

@ni_wink84 Год назад

That turned out great!! Can’t wait for this finale vid to come out!! Amazing work as always Mike!!

@MichaelSabo Год назад

Thank you man!

@Clapped_400ex_rider Год назад

Love when mike posts 😊

@MichaelSabo Год назад

Thank you bro! 🤘

@Charles53412 Год назад

BulTaco and two BulTaco's as well for Lani getting those gaskets out so fast !

@MichaelSabo Год назад

He deserves it man!

@downtoearthconstruction7768 Год назад

Almost every video I look up at the ceiling storage in your garage and admire the rattle can color pallet 😂 you’ve built a beautiful collection of some killer scoots my man.

@MichaelSabo Год назад

I appreciate that man! Literally every inch of this garage is utilized 😂

@downtoearthconstruction7768 Год назад

@@MichaelSabo I can only imagine the trouble you have storing all your projects between the shed, garage, and trailer. But it’s well organized and that’s all that matters.

@frankgrochot8719 Год назад

Mike Sabo, the Stacey David of the 2020's! Great stuff man!

@wyattguttery9614 Год назад

Just made my day 10x better. Always looking forward to the next video. Killing the game as always man

@MichaelSabo Год назад

Thank you Wyatt!

@victorgerhardt1504 11 месяцев назад

You killed it! Finished motor was AWESOME!

@hunterbroskee6184 Год назад

Sabo has literally saved me thousands from just watching his builds iv learned a shit ton definitely appreciated

@MichaelSabo Год назад

That makes my day hearing that!

@calamitycycles5994 Год назад

Mikes videos Make America Great Again 🇺🇸

@MichaelSabo Год назад

Lol, thank you man!

@scuzzlebutt1980 Год назад

Can’t wait to see you rip this. TrI-Z’a are fast as hell.

@MichaelSabo Год назад

I'm excited too man!

@nwmotogarage Год назад

I take inspiration from your videos when filming mine and try I to live up to the same enthusiasm as you. My favorite trait of yours is your confidence. Your ability to try, fail, try again, and fail again.... and then ***POST IT*** is truly admirable. I see the comment over and over again on your channel "love how you show us everything" Well done sir, I would love to pick your brain about creator things here in the future. Thank you for the hours upon hours I know you put into editing alone on every video, it is well worth it. Cheers brother 🤙

@MichaelSabo Год назад

I just checked out your channel and took some time to watch your CRF ASMR video. It looks like you do really good clean work and your shots are crisp. If I can offer any elevator advice, it would be to be consistent and go the extra mile. The nights where it's 2 am and you're wanting to fall over but there's just one more shot that would add a sweet touch to your video... stay up til 3 and get the shot. People will notice, even if it's only a handful in the beginning or even just one. It took me 5 years to build any type of decent sized following, don't forget that when you're wondering why the views aren't there or why similar channels with lower quality are booming - just don't quit, and don't lower you're quality; success will come with time. I hope this helps man and good luck on your journey; I subscribed!

@TheNotimprezed Год назад

Things I'll never do - 1. Build an engine as good as Sabo. 2. Miss a Sabo video. Great stuff!

@FatHulkRideEbike Год назад

Even the before and after camera angles...the angles are almost exactly the same! Great video!

@MichaelSabo Год назад

That is not by chance haha; I appreciate you noticing that man!

@lewismocaby3646 Год назад

Your copper gasket supplier does great work of making precision parts. I bought one of his head gaskets for a Mustang model 2 motor scooter from the early 50’s and it fit perfectly. Good luck with the fire up on your Tri-z. Last one of those I rebuilt was over 20 years ago. That one was built out of parts that the guy carried in all apart in 5gal buckets of at least 3 different engines. It went together fine surprisingly, although after a couple of heat cycles I had to retorque the cylinder base and head due to it spewing water everywhere. The owner didn’t feel resurfacing the jug and head were necessary and surprisingly the engine stayed together for several years before he finally replaced the rings. Great video work on this one, can’t wait to hear your Yamerhammer dingin away.

@MichaelSabo Год назад

Glad to hear the feedback on the gaskets. Sounds like you had a nice basket case build back in the day!

@lewismocaby3646 Год назад

@@MichaelSabo, that was just the tip of the iceberg. It was my first year after graduating high school and began working at the local Honda dealership. Besides the customer bikes I worked on the owners collection of bikes,3 and 4 wheelers and cars. Everything from a model A truck to their mid 60’s Porsche. The family has 5 brothers, one of which was my 6th grade teacher and during that year of school my Dad had given me my first basket case. It was a CL77 Honda 305 Scrambler along with a spare CB77 of the same era. Two years after the First basket case my grandpa bought me a rust free 63 Chevy 2 nova. It’s been downhill ever since, especially after getting the antique Harley bug and working in the construction industry as a heavy equipment operator and mechanic. While working for the Honda dealer though I did quite a few basket case projects. Everything from a. collection of 5 CA160 Dreams that a group of local Shriners went together and bought to Tecate’s Banshees and gobs of 250R’s both atc’s and trx’s. I’m enjoying watching other people take on some of the cool stuff on here though and it seems as though you’ve set yourself up pretty well. Good luck on your future builds and endeavors, I’m looking forward to the show. 👍

@MarkusAnthony88 Год назад

Wake up babe, Sabo dropped another build!

@MichaelSabo Год назад

Haha, thank you Markus 🤘

@DerredmaxTRIAX Год назад

This is some high quality TV right here.

@MichaelSabo Год назад

Always making my day man!

@thebigdustin Год назад

Packet of cheez it's, some tea and an engine build video from Mike is my idea of a friday night.

@MichaelSabo Год назад

Haha, you made me laugh man; glad you enjoy my videos!

@kerm9807 Год назад

Simply the best on RU-vid 🎉

@Berm_Blaster Год назад

You do a great job with making these build videos detailed enough without making them super long. I prefer videos around 20 mins anything longer I start losing interest. Thanks for making these for us who enjoy small engine building. Keep it up man I'll always support

@MichaelSabo Год назад

I appreciate this feedback man! It's definitely on the longer side of videos but there was so much that went into the build, it can be hard to know where to cut the film.

@Berm_Blaster Год назад

One thing to note, if the case halves slide together or come apart with no resistance then something is wrong. If separating or mating the halves then the seals are sealing. I had one engine separate like nothing and sure enough seals and bearings we're bad along with everything else lol

@jonathanwilliams4255 Год назад

Great work Mike! You became an amazing engine builder that I would take over the original manufacturer over the years.

@MichaelSabo Год назад

Wow, this is a big compliment Jon; thank you!

@MxHDXB Год назад

Happy to see your videos being appreciated, I have learned a lot from them since day one. Appreciate the quality work you do instead of cutting corners. Wish u all the best.

@MR-puffnstuff Год назад

If you use those dollar store color or not beads that you add water to and silica packets as well in a net bag drop it in a tank those in theory will keep the tank dry to as well maybe just silica alone just a thought u way more of a mechanic then I could ever be I learned so much from this channel thank you.

@vettepicking Год назад

Great work ! The amount of hours of labor needed to achieve this is unbelievable , most won't ever know

@MichaelSabo Год назад

This is very true, but well worth it in the end!

@coreywoods2742 Год назад

What a transformation!

@coreywoods2742 Год назад

@MichealSabo, when do we get the full build video?

@tsar-bomba2413 10 месяцев назад

I really love your channel, and I think it's great how you take these survivors and make them live again. You make them new again and ready to rip once more

@jsvallee567 Год назад

nice job once again mike ! realy enjoy watching this man im learning a lot

@MichaelSabo Год назад

Thank you, glad my videos are helping you learn!

@chrisyeahbuuwassrileegowyn9279 Год назад

Hey man! great as always!! Oh man on those damaged radiator fins, get a new small headed medium stiff plastic scrub brush, about a 1"x1" head on it and try that. you won't believe how fast you can straighten them out. You just have to use a pick/screwdriver/whatever on the areas that are smashed flat, then just brush it in both directions. Give it a try on an old one or whatever. You won't be disappointed....✌🤘

@MichaelSabo Год назад

I'm going to have to try this out; thank you for the tip!

@darrynruzicka2883 Год назад

Yeah dude! Loni made a custom thickness copper head gasket for my 1985 CR250 restoration to get my squish and compression just right. He's out of Phoenix and so am I. Same thing, we ended up talking for like 45 minutes. He has cad files for nearly every base/head gasket for every bike since the seventies. And if he doesn't have it you can send him a gasket or whatever and he can make it. Awesome dude and company!

@hughwinellis Год назад

A bit of Micheal Sabo a day keeps the crazy away 😂 awesome video

@MichaelSabo Год назад

Haha, thank you Hugh!

@jeremymckinney3811 10 месяцев назад

I have to say the on the fly homemade crank puller out of edger blade was brilliant love your videos

@pbag26 Год назад

Loved this. Incredibly detailed, better than the service manual indeed! More power!

@IFIXATVS Год назад

I recently did a top end on a banshee only to realize the crank bearings were squeaking like crazy. I had to rip the motor apart again to replace the crankshaft. Gotta love machines!

@pauljeffries Год назад

Great twist at the end with the timelapse, superb work as always 👌

@stevenbissonnette7893 Год назад

This is possibly gonna be the nicest tri-z on the planet!

@frunkyfaym222 Год назад

So excited for the final build, thanks for this banger of a vid :)

@MichaelSabo Год назад

Glad you enjoyed it man!

@gggracing113. Год назад

Mike can you do a video after final build with the cost of the build. Your doing an awesome job!😊

@robsivertson2772 Год назад

Awesome that you actually did tri z….little late for me as I found a boatload of problems on the 86 I had, (alot of cracks frame wise, even on the swing arm 😮) sold it before this came out…still, I know where to go if I find another!! Thanks Mike!!

@robertrojas7179 Год назад

After building my tecate I barely had got the squish band just perfect 😅🙏 old tolerances on different years crazy 😭 man that thing was fast from how light the frames are!

@mikedahoe2251 Год назад

Enjoyed that video a ton!! Can't believe you said the word grody lol...

@MichaelSabo Год назад

Lmao! Glad you enjoyed it man!

@11GalleryATV Год назад

Ha! Grody ... I haven't heard that word since the 80's! Another great video though, sir!

@MichaelSabo Год назад

Lmao, thank you man

@videosforfun5558 Год назад

Looking amazing as usual.

@njmxjunkie3128 Год назад

Ohh Lonnie I’ve ordered from him before! He’s the best, amazing quality and good shipping time. Only thing is usually those gaskets should have lines and perforations in 2-3 lines around perimeter of gasket to allow copper to squish and seal? Idk maybe cause it was a rush but should still work fine

@MichaelSabo Год назад

I know they're supposed to be annealed before each use to make them softer so they seal. Not sure if that's what you mean by the lines that are made after they're compressed.

@njmxjunkie3128 Год назад

@@MichaelSabo no I’m not talking about the anealing process. These gaskets aren’t pressed (as far as I know) they are cut. In order to press them he would need specific dies for each gasket. I’m the surface of your gasket looks smooth and most have a set of 2-3 lines that follow the circumference of the whole gasket. It shouldn’t be a big deal at all. Especially since it’s a base gasket and not a head gasket. Much less pressure.

@FISHYYYYYYYYYYYYYY Год назад

you just made my night love then you post new video

@MichaelSabo Год назад

You made my night commenting this bro! 🤘

@FISHYYYYYYYYYYYYYY Год назад

@@MichaelSabo thanks for awesome content man

@juniorfuller6829 Год назад

Hey Mike, just a heads up. Be careful when greasing the outside of the seals. I have seen one pop out on a car front crank seal. Idk if it would happen to a quad engine, but it's something keep in mind/think about.

@MichaelSabo Год назад

Interesting; I wonder if the tolerances were incorrect on the car? I haven't had one pop out yet.

@juniorfuller6829 Год назад

@MichaelSabo yeah. it may have been a once off, just something to consider. Anyway, I love the videos. Keep them up.

@DC-dd7cz Год назад

I owned a black and red 85 1/2 back in my teens. Wish I never sold it. Still looking for one again

@ipawdmaster Год назад

Hell yea lani hooking it up with them gaskets 🤘

@MichaelSabo Год назад

The dudes an OG!

@williamquick6153 Год назад

Man! You do awesome work Mike. Love your videos. It is so awesome how you show the hiccups in all of your builds. I really appreciate that because it just makes it an uncut reality channel and not the fake cut and paste stuff. Two thumbs up. Can't wait to see the final product once again

@zedrone7975 Год назад

OCD rules! great job Mike

@MichaelSabo Год назад

Thank you man!

@jamesswetland5019 Год назад

It’s looking really good. I wish I was a perfectionist like you. I would’ve used a sledgehammer to get those 2/2 together.

@matthewgoins87 Год назад

Next I think you should build a 2006 or newer TRX450ER for all us Honda guys. You did the 400ex back in the day. Now’s time to step it up to the 450. Would be cool for you to build one to match your sweet sweet TRX250R that we haven’t seen in forever.

@MichaelSabo Год назад

I like the idea and I've got a good build plan for one. I just ordered about 6k in parts for my 250R for a series that's coming up!

@matthewgoins87 Год назад

@@MichaelSabo sick I can’t wait. Love me some Michael Sabo videos. Thanks for the reply!! 🤙

@Bri-tg6xr Год назад

lets go!!!!!!!!!!!!!!!!!!!!!!!!! Great seals that require you to split the cases, ugh! NVM, might be drunk. Enjoyed the thorough walk-through on the trans build.

@MichaelSabo Год назад

Glad you enjoyed it man!

@downtoearthconstruction7768 Год назад

I hope Moto Blast see’s their work in person when you’re done.

@MichaelSabo Год назад

He's close enough to where I've brought finished machines to him to see; dude does awesome work.

@downtoearthconstruction7768 Год назад

@@MichaelSabo I’m impressed by their work, you can tel the guy takes pride in what they do. I’m on the other side of Pa and will most definitely utilize them on my next project. You’ve been a good advertiser that’s for certain. Glad these guys get to see their work after just seeing a bunch of parts.

@bryancoyne9692 Год назад

I'm not the type to buy used bikes always stayed away from it just because I hate to get someone elses problems even a good bike builder when ppl build bikes for other ppl they just don't treat it like they are building it for them but watching Mike build now for awhile I can say that I would definitely buy a bike Mike builds each bike I see he puts up 💯 percent on no matter where the bikes going or who's it's for definitely a great bike builder I'd be more than happy buying a ride from Mike great job brother like always keep up great work really nice job u do 💯🔥

@MichaelSabo Год назад

That's a really big compliment man. When it comes to selling these (which is rare anymore) most people compare to the regular used market and don't consider that in 99% of cases it's really not the same value.

@timmanracing8776 Год назад

I through a fiesta when i seen this vid release🎉🎉🎉🎉

@MichaelSabo Год назад

Haha, thank you man!

@Mac181 Год назад

Can’t wait to see the next video 👍

@DestinationDesert Год назад

Another great video Mike! Soooo stoked to see this biaaaatch run! Braaaaap

@MichaelSabo Год назад

Me too man, thanks for the love!

@youareright5431 Год назад

Those copper gaskets would be awesome for any two stroke applications 👍👍

@justincarlfilms Год назад

Dude! The music at the end was a noice touch 👌

@MichaelSabo Год назад

Glad you liked the selection man!

@justincarlfilms Год назад

Hope you put the tri-z on a dyno when you're all done,be very cool to see the numbers 👍 😎

@DowneastTackle Год назад

Lets share this out and get this man to 300k, Another great video.

@MichaelSabo Год назад

I appreciate you man! 300k will be awesome!

@jamesBGgarner Год назад

Tha man tha myth tha legend Mike fn Sabo!!!!!!

@MichaelSabo Год назад

Haha, thank you bro!

@h.routdoors3537 Год назад

Love the videos Mike. one of the best guys making these type of videos out there in my opinion. you upload amazing quality videos and do it consistently. great work man keep it up

@MichaelSabo Год назад

I appreciate this feedback man; glad you enjoy my videos!

@CalebLD21 Год назад

Hey Michael, I want you to know I really enjoy watching all of your videos. I even watch them so much my wife knows you now 😂. I recently just started redoing my shop and would love to see a video on how you keep yours and maybe even some must haves. Keep up the great work!

@Linkin_Dudley3780 Год назад

I know I’m probably the millionth person to ask you or tell you, but you should definitely do a yfz450! 😅

@ds650forever9 Год назад

Amazing work sir. It turned out really nice, as always.

@cletusbowling923 Год назад

Hope to one day be able to build a tri-z also . Glad you covered o e for me to go back on when I do. Thanks Mike

@chevyguy-hf1yq Год назад

Top notch brother. Excellent work man.

@torr-michaelbennetta9785 Год назад

Great video, well done. Hope to see more ATCs in the future !

@miguelrendon1073 Год назад

Appreciate your hard work bro your eye for detail 🤌🏼

@joedurt3364 Год назад

Thanks Mike. I needed that today .

@Lracer61 Год назад

Another fantastic video! Keep up the great work

@oddnutrandoms9367 Год назад

So excited to see this run also had that clutch problem on my blaster and i had it apart 4 times in 1 day until I figured out what was going on

@nicholasclemmons1923 Год назад

Love the vids mike

@MichaelSabo Год назад

Thank you Nick!

@davidstoner27 Год назад

Woot video to watch while rebuilding a bike you rock bro

@MichaelSabo Год назад

Just don't be trevoring and gasket surfaces bro...

@davidstoner27 Год назад

@@MichaelSabo I was watching him with the yamabond

@MichaelSabo Год назад

@@davidstoner27 😂 needs supervision

@davidstoner27 Год назад

@MichaelSabo don't we all alittle thought that's why you keep us in the shop lol

@jasonjaeger4042 Год назад

For sealing cases I cut a V notch in a strong nylon scraper tool (no clue what the tool is for) and put a bead around the case then run the tool all the way around and leaves a perfect, even, centered bead of Yamabond. Took a few times to get good at it but works great and never had a leak since (never really did before the tool but whatever). But every mechanic has their own way of doing things.

@MichaelSabo Год назад

I like the method man, thank you for the tip!

@jasonjaeger4042 Год назад

@MichaelSabo still don't understand why after doing this for 8-12hrs a day I sit and watch vids of you doing it lmao. Thanks for the vids man

@boymechanic2498 Год назад

Love the vids mike trying to get my banshee swapped tri z project finished love the vids

@MichaelSabo Год назад

Good luck with your build man; that things going to be gnarly!!

@notimegarage8632 Год назад

The depth into detail is crazy awesome! Only channel ik of this kind of perfection

@MichaelSabo Год назад

I appreciate that man; thank you!

@notimegarage8632 Год назад

@@MichaelSabo no thank you! Hope to meet you next year at the dunes, just need to finish my 250r💪🏼

@DUNEATV Год назад

“Lift up your shaft to get it to work” OK!

@MichaelSabo Год назад

😂😂

@priyamunera7518 Год назад

Great video.! Thanks for sharing 🔥

@MichaelSabo Год назад

Thank you for watching!

@Misticmyst73 Год назад

Makes ya wonder now what happened with that engine before after seeing that.. Looks awesome though.. Can't wait to see that thing put together and live again.