This Jig Is A Two For One! Accurate and Repeatable! Make one Today!

Подписаться 209 тыс.

Просмотров 661 тыс.

50% 1

Best Drill Holder EVER www.aglimpseinside.org/store
My Digital Plans Here www.etsy.com/shop/aglimpseins...
Please take a look at the video sponsors down below as supporting them helps support this channel
Starbond www.starbond.com
use code "glimpse15" for 15% off at checkout
TotalBoat www.totalboat.com
enter 'TBGLIMPSE" at Checkout for 15% off your order!
Rockler www.rockler.com
ROCKLER -www.rockler.com/48-universal-...
Instagram accounts
WHYNOTPLY - / whynotply
AGLIMPSEINSIDE - / _aglimpseinside
PENGUIN CNC - pcncinc.com/ $300 off any CNC with code 'GLIMPSE'
BITSandBITS - bitsbits.com/ save 10% with code 'GLIMPSE10'
For more of a behind the scenes look and to check out what's going on here in the shop and elsewhere. SUBCRIBE to my Second Channel
"A CLOSER GLIMPSE"
/ @acloserglimpse9895
To Help Support Us and The Channel, Click Below
/ aglimpseinsideprojects
A Huge Thank You to My Patrons:
STEVE MILLS
JOHN C LEONARD
MARK NANO
JAY JOHNSON
MARK Thompson
Doug Stubbs
Walter Abel
Al Genaro
Basel Tashkandi
Brett Ricketts
Anthony Triola
Derek Gibbons
Bob Noble
Katy Lochridge
Carla Greenwood
Matt Killam
Joe Porter - Dirty Bay Woodshop
Shane OReilly
Earl Price
Keith Current
Nettie Willmore
Lindsey Lottie
Bill Durham
Tony Surma
Tharemy Hopkins
Chuck Johnson
Steve at Moonshine Metalworks
Richard at FAB 42
David McCollum
Marek Žehra
THANK YOU ALL!!!
Amazing Companies you should check out:
TotalBoat www.totalboat.com
enter 'TBGLIMPSE" at Checkout for 15% off your order!
Starbond www.starbond.com
use code "glimpse15" for 15% off at checkout
Armor-Tool www.armor-tool.com
Rockler www.rockler.com
Powerpro Hardware - / powerprohardware
ponyjorgensen.com
Amazon Affiliate Links
------------------------------------------------------------------------------------------------------
Great gifts for makers:
Locking Casters amzn.to/3biR0zT
Squeeze Bottles - amzn.to/38xQRXU
Deli Containers w/Lids - amzn.to/2YLwoKS
Tadpole Tape Cutters - amzn.to/2PKrKJ0
Diablo 60 tooth 10” fine finish blade - amzn.to/35nCxzd
100 PK Utility Blades - amzn.to/2PLsBJl
Paste wax - amzn.to/34lX99J
Finishes and solvents
Paste wax amzn.to/2NsxEwM
Wipe on poly amzn.to/2NvDM7e
Halcyon Clear amzn.to/2EcKZVS
Mineral Spirits amzn.to/2tFzXTX
Tools
Cordless angle grinder amzn.to/2Ex6EZY
Cordless circular saw amzn.to/2XrJJXp
Cordless drill/driver combo amzn.to/2Xrp0TY
Cordless router amzn.to/2IFSg5U
Cordless mini blower amzn.to/2BVLwLg
Pneumatic brad nailer amzn.to/2ExKQ0A
Air compressor amzn.to/2BUqr3V
Glues and adhesives
Wood glue amzn.to/2IE0343
Epoxy resin amzn.to/2H44cw0
5 Minute epoxy amzn.to/2Xq3W03
Spray glue amzn.to/2EfReId
MISC
Plastic Pastry Bags- amzn.to/2PuwYIO
Deli storage Containers amzn.to/2DYpjx0
Clamps
24” bar clamps amzn.to/2Nt2K7o
12” HD f-style amzn.to/2SuOrAa
Quick release clamps amzn.to/2Numckh
Tape
1 3/4” blue tape amzn.to/2UaWdRk
1” blue tape 3pk amzn.to/2Vz1Hpr
Gorilla Tape, Strongest ever amzn.to/2SBZRlB
Tyvek Tape, Best for resin masking amzn.to/2C1eOIv
Wood grain duck tape amzn.to/2EsEQEU

Хобби

Опубликовано:

17 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 416

@Gamersb3stfri3nd Год назад

To me this seems super obvious, but a ton of other channels don't ever do it. I really appreciate that you show what you are making and how its used before jumping into the actual build. A lot of channels will start building and its only half way through the video to understand the actual design

@asoggyburger479 2 года назад

Love the simplicity but also the versatility that comes with your design. Awesome video! Probably going to be making one of these soon!

@vinnyreid5442 3 года назад

Great job Chris. Looks so simple to make the way you explain it all. Thanks for the great idea!

@darodes Год назад

Chris, I’m becoming a big fan of the channel!!! Videos like these are super helpful, and I’m always happy to see different persons’ little adaptations to jigs like these… it really helps beginners/newbies like me adapt and modify these jigs as well

@lynardburt5992 2 года назад

I’ve seen a few of these, yours was very easy, and ingenious too. I like your way of the track inlay, and also the mod while showing us the build.

@Cliffepoos 3 года назад

I love this dude. I am pretty darn sure I'm going to be making one of those since I don't have room or money for a jointer. Thanks so much.

@5zwoodworks 2 года назад

Good job showing the first one. It shows that things don't go as planned but we learn from it which is what woodworking is all about.

@nw24153ns 3 года назад

Your ingenuity of creating a dado without a dado stack & making wedges is way cool. PS: thanks for the help positioning drawer slides on a 9" build, it worked well!

@russmartin4189 2 года назад

Chris, I subscribed even though I already have far too many woodworking channels. What I like about you is you are down to earth and a regular guy. You don't even remove outtakes. That's cool. I want to see people who are real who make mistakes and are not embarrassed to show them. A lot of woodworking is about how you recover from mistakes. Oh. I will make this jig one of these days, but I think I would put some screws in the T-Track to be safe.

@davereade8939 2 года назад

Great video and build. I've watched several tapering jig videos and decided on your build. Thanks, man!

@lesliecruzado2793 3 года назад

Love it! I'm actually gonna build one. Thanks for sharing!

@stevehorner3153 2 года назад

Great video, I picked up the material I would need and took less than 2 hrs to complete, works fantastic. Thanks again, keep up the great videos.

@mishellekochel4510 2 года назад

So very much on my list of wants and needs! Thanks again for the step by step Chris!!! In my SAVED folder!!

@billymacmakes 3 года назад

Great looking jig Chris! Love its versatility. Even if you have a jointer, these are great when you have a special piece of wood that is wider than your jointer and you don't want to rip it to mill it up.

@sharirobinett3999 3 года назад

I'm SO excited for this. Thank you for sharing. It's exactly what I need and such a great design. Can't wait to attempt my own!

@AGlimpseInside 3 года назад

Awesome. Shoot me a message on Instagram when you finish it I’d like to see it

@davidmallett1110 2 года назад

love the simplicity of this jig, will be making on for myself

@ladykenja2700 2 года назад

- Chris, thanx 4 sharing. You make it seem simple & "do-able." Always appreciate an artisan at his craft.

@luthiermatt 2 года назад

I have looked at a lot of designs and I think this one is very good. Nice work.

@gilbertboyer9936 2 года назад

Very nice video. Clear, precise, friendly and well explained. I will be following your videos.

@richragan4810 3 года назад

Thanks for sharing and all your hard editing work!

@createdimperfectly 2 года назад

Love it! Thanks for the idea!

@PaganWizard 2 года назад

I really like this jig A LOT!!! The only thing I would do, that you did not do, is add a miter strip to the underside. You can buy one, or make your own out of a piece of scrap hardwood. This would allow you to use the jig without having to rely on lining it up perfectly to the edge of the blade using your rip fence.

@grotekleum 2 года назад

Good point, added to the parts list already

@benblackwell44 2 года назад

I agree with this miter strip suggestion and have done that on my taper jig. Make the width slightly under sized so you push the jig toward the saw blade while making the cut and pull the jig away from saw blade when retracting the jig. I borrowed this idea from someone on the web.

@Governor_William_J_Lepetomane 2 года назад

I was literally about to type the same thing. You can use a wood runner, cut with this jig and the fence combo, for one last ceremonial cut before the fence isn't needed with this jig anymore.

@Shotsmoky 2 года назад

You stole my thunder PW. 👍👍

@charlesshepherd9132 2 года назад

Great idea. Definitely added to my to do list.

@djtblizzle 2 года назад

Man!!! Your shop and your work are CLEAN!!! Goals bro. Goals!

@martinfetter2391 2 года назад

Thank you, I enjoyed your version. Im currently make one too but Im adding the ability to use it to mill wood from small tree logs.

@ericpetitclerc5519 2 года назад

Learning to appreciate videos, Sir! Good job!

@tomm3082 2 года назад

Best one of these jigs that I've seen - and I've been looking for months!!

@homeinspectingwithjohnhans4250 2 года назад

I appreciate how you always encourage the use of "whatever tool you've got". The best suggestion was the used of a screw to get the burs out of the interior of the T-Track.

@t.r.gooding2963 2 года назад

That is an awesome jig, thanks for sharing!!

@Valkyrie1911 2 года назад

This is pretty slick. I'm just getting into woodworking and this is going to be the first thing I build when I get my tablesaw.

@sticky59 2 года назад

Very useful jig .... thanks for the upload.

@qmoonwalker3847 2 года назад

Really like how you built and made slight tweeks to make it even better. Thank you!

@pdubs7069 2 года назад

You are an absolute pleasure to watch!! Everything you make is totally fkn awesome!!

@a.dejesus792 Месяц назад

Great jig. I will be making one for my shop.

@Matt_224 3 года назад

Definitely saving this to my shop projects list.

@brendo1000 8 месяцев назад

Just made this - thank you for the video!

@xanderalxandro6823 2 года назад

Great video, good tip and idea, love the sincerity.

@UppsalaSal 2 года назад

Liked how you made the t track grooves. Much faster than a router. The stop block is a great feature.

@katekelly691 Год назад

Nice job! Saving this for my husband.

@chrismoore9997 3 года назад

Great end to a great video. Thanks! It was soo good I watched it twice.

@woodworksbygrampies1284 3 года назад

I agree Chris, the "real man" comes through. Chris really comes across as a genuine and sincer guy. Have a good one!

@lpanebr 2 года назад

It's the first time I see someone give the tip about not putting down pressure on the jigsaw! Thank you!!

@IRBOSNM8 3 года назад

Thank you. Great video.... keep them coming. I learn something every time I watch one of your videos.

@AGlimpseInside 3 года назад

That’s great to hear thank you for letting me know

@AT-AT-AT-AT 2 года назад

I immediately pointed to the wedges. :D great project. thanks for sharing

@arnoldolorenzo3474 2 года назад

That thing is awesome! Love it.

@aprildegele1510 Год назад

Great jig! One suggestion if I may. Mark commonly used angles on the jig so you don't have to calculate every time. I also use the "build around the track" method for laying t-track. So much easier, don't have to use the dado stack, and if you mess up the placement, you haven't plowed your base. Just adjust/recut to make the adjustments and voila! I noted you didn't put a runner on the bottom and I believe I can see why ... that it's not needed as you're referencing against the fence? Fancy shims indeed. Save those bits because they can make some really cool inlay/angled inserts.

@marcosjardim2093 2 года назад

Great job. Good idea. Tanks for sharing.👍👍👍

@idahopete9211 2 года назад

Great Job! This unit is similar to a Rockler jig, but much better. I like the tee track for the clamp board function. The Rockler unit has a slot the length of a MDF clamping board, which flexes too much to provide good clamping pressure. The double layer board with the tee track is a much stronger design and will provide good strength for clamping the wood being cut. I will be modifying my Rockler unit. I'm a big fan of your channel and procurer of your products... Keep up the good work!

@annnguyen3223 3 года назад

Great jig!!! I'll try to make one.

@brettwestley6897 2 года назад

Awesome jig and job. Way to go!

@hipairbrush1053 2 года назад

Great jig...great work!

@David.M. 3 года назад

Thanks Chris, nice jig!

@jscheepers8528 2 года назад

Awesome idea, thanks for sharing

@stephenswindell1781 2 года назад

A quick thought: if the piece you're edging hangs off your table before you run the second edge through, you will most definitely not get two parallel edges. Those edges will vary by whatever small (or large, or surface bump) is in the piece. Because you mount the piece in the sled, and the sled is flat, that first edge will be straight and square to the sled and table. However, once it's removed from the sled and run through the second time without the sled, any bow or twist or bump will vary the bottom surface's engagement with the saw table. For very short pieces which are completely on the table before starting the second cut, and you are very careful pushing them through so as not to accentuate any twist, you may end up with two parallel edges.

@globyois 2 месяца назад

Great project, thanks.

@philbrownred6500 2 года назад

Definitely going to make one of these.

@wilfredocruz6857 2 года назад

Thank you simple and effective !

@RobertJones-pr9rh Год назад

Real good one, Thanks.

@randyroth6115 4 месяца назад

Awesome project. Very simple instructions for those of us not to swift on the uptake lol. Great content. I'm looking forward to view more.

@WoodworkerGuy Месяц назад

Great video. My jig is similar. I am going to add the stop block tho. Well done Sir!

@crumbocrumbo6814 2 года назад

I made one beautiful design. I didnt buy the expensive t-track I made my own by cutting a rabbit in the ply wood then filed the head of a carriage bolt flat to fit the slot for hold downs I'm very pleased with how it turned out. Thank you for this vid. Subscribed.

@nicholasguymer3471 Месяц назад

Thanks Chris. I love this idea. Time to make another jig 😂 love to know how you work so fast, like a ferret on speed!

@jimanderson4495 2 года назад

Thanks Chris. Great tips. I already have a similar tapering jig, but will install that push handle I love that idea. Good Luck Buddy. All the Best from Bucks Cty, PA

@AGlimpseInside 2 года назад

Awesome. Thank you so much for the feedback and I hope you’re doing well brother

@michaelm077 2 года назад

Cool jig, very versatile.

@johnchan6191 2 года назад

Wow, gr8 table saw gig. Thx 4 sharing on Utube.

@zafarsyed6437 3 года назад

Excellent way to make high quality shims. The byproduct are some oddly shaped sticks...

@michebre Год назад

Great video. Thanks.

@TheSapro 3 месяца назад

Thanks for this - I made it this weekend and am looking forward to getting some usage out of it! One note is that the T-track you linked to from Rockler is 3/8" tall, not 1/2", so I have the opposite problem in that the track sits below the 1/2" ply. rather than needing to be sanded down. Also, Rockler sells a similar jig for $79, and the T-track, clamps, and their 24-pc jig & knob kit came to $70 :)

@glencrandall7051 2 года назад

I believe I have watched just about every straight edge/taper jig on you tube and this is about the best I have seen. The design is simple. Construction is straight forward. The cost of materials should be reasonable. You have specified all the materials and dimensions. And you demonstrated the construction details. (I don't understand why so many folks are asking for plans.) The only thing I can add is that before shooting your videos you should take a Valium. 😜

@superdave_2931 2 года назад

Looks badass, already have everything to make it 👍🏼

@holdemNE1 3 года назад

I have a Craftsman Jointer that I don't like using. I've been planning on making a straight edge jig for a while now. Although mine will be closer to 6 feet long, I will still use some of your ideas for sure. Thanks for posting.

@jlansdale536 8 месяцев назад

Dude this was great! I just made a tapering jig using the slot method with carriage bolts and it came out really sloppy. This was perfect!

@titol34 Месяц назад

Excellent video bro . I really appeciate what you built . many thanks just keep on :-)

@justgoballistic 3 месяца назад

I built one of these about 20 years ago because I had a need for legs tapered on all 4 sides. My stop is adjustable in height and has a steel pin which fits in a hole drilled in the bottom of the leg. Works like a dream.

@bigsparky65 2 года назад

Great jig, as always Great video.

@jessjulian9458 3 года назад

I definitely need one of those. Thanks for sharing my friend.

@AGlimpseInside 3 года назад

Yes, yes you do

@thefacelessbiz 18 часов назад

Awesome tutorial.

@michaellionart4841 2 года назад

Excellent. Thank You 🙏

@LcarlosCiceron8254 2 года назад

Espectacular jig!! Gracias por compartirlo👍👍

@MashMonster69 2 года назад

Nice jig. I'll probably make something similar for my radial arm saw soon. 1 idea about the handle you made. The action you are doing is similar to pushing a hand plane, so make your handle like a plane tote, lean it more forward (about 55 or 60 degrees from horizontal) and it'll be more ergonomic.

@romanjohnston 5 месяцев назад

I am actually going to make this with 1/8 hardboard as the base of each layer. I work with thicker wood a lot so reducing the height of the jig/sled as much as possable while maintaining rigidity is my goal. Will take about 3/8 off the height of the platform the wood rests on. So my 3.5" blade height will still give me just a hair over 3". Thank you for working out the rest....nice design.

@seadoggozo-fishingguitarsa1837 7 месяцев назад

that is a great video. Thanks.

@TheRockeye007 2 года назад

great tip. thank you!

@Art_911 3 месяца назад

Thanks, what a great jig. The best one I've seen so far. Do you have "plans" or a cut list for this?

@seansugrue5354 3 года назад

I definitely will make one. 👍

@hollandcustomwoodworking5932 2 года назад

Great looking jig! I lost it when you talked about sanding that handle off camera 😂😂

@rammhansen37 Месяц назад

Really enjoy your videos.

@sportstertaco 3 года назад

Definitely going to build your version of that jig. Super easy!!

@AGlimpseInside 3 года назад

What’s up Shane. Hope you’re doing well my friend good to hear from

@SuperZmeister 3 года назад

My whole shop is a ‘catch-all’. I always know where everything I need is! Might take me forever to find the exact part I desperately need, but It makes the day go by faster. Never be ashamed of the place you make such great creations. I always enjoy your videos, keep’em coming.

@AGlimpseInside 3 года назад

Thanks for sharing and thanks for the kind words I really appreciate it

@Shadoweclipse1386 2 года назад

This is a great jig! Jig videos are just about my favorite videos for woodworking :-)

@AGlimpseInside 2 года назад

Thank you Jason I appreciate it

@Shadoweclipse1386 2 года назад

@@AGlimpseInside Absolutely! First video I've seen of your channel. Subscribed :)

@SpecificLove7 3 года назад

Great looking jig. That will be really handy.

@AGlimpseInside 3 года назад

Yes sir It sure will thanks buddy

@luckymsimang3879 7 месяцев назад

Just love the jig

@appalachianmountaindesigns7713 3 года назад

Great video Chris, I was talking to the wife about a jointer, bandsaw, drum sander today. That I needed to buy. Lol, I can build this for now. Thanks for sharing. Chris-"Appalachian Mountain Designs "

@colinmartin9797 2 года назад

I recently got a thicknesser and wanted something to joint with (don't have the space for a jointer in my garage) and this looks great, but I had a question before I start on it - my table saw is a portable metabo HTP, which is really nice, but being portable, the fence is relatively light duty. Would it make sense to mount this to a piece of wood to run in the miter slot on the saw vs referencing the fence, or is there a use-case for this sled that would make it worth not having said miter track?

@Lwimmermastermetalart Месяц назад

I think it’s a bit debatable whether it’s worth laminating plywood opposed to a dado or router bit to do the T track. But I’ll give you an A for creativity! Also I think a guide to go into the table slot is also a great idea. Don’t use wood though. Temp and humidity will change clearance . They sell nice pre fab adjustable slides or just use plastic like UHMW. Just an option but the fence does give you adjustability when you need it.