This man is a Genius! Insert Spark Plug into the Soldering Iron and Amazed!

Подписаться 174 тыс.

Просмотров 951 тыс.

50% 1

This man is a Genius! Insert Spark Plug into the Soldering Iron and Amazed!
An interesting way to solder when there is no normal soldering iron tip nearby
🔥Why is it not patented? Insert the spark plug into the TV and watch all the channels of the world! - • 🔥Why is it Not Patente...
Glad to see you on my video - Every video is creative hacks that help people in everyday life!
See, rejoice and develop all this just for you!
Don't forget to subscribe and like, glad to see you on my channel, you can watch my other videos✔👇
🔴 More of my videos here: www.youtube.co...
On this channel you will find useful tips, time-tested life hacks, you will need it in your everyday life and it will be useful, WELCOME TO MY Channel CREATIVE HACKER !

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 558

@kevinwheeler6667 9 месяцев назад

That was 4 minutes of my life I'll never get back.

@Don.Challenger 9 месяцев назад

At least his mad science laboratory table top is astroturf green so its both out of the world and trendy.

@markcollard9326 9 месяцев назад

Was it a trolling video, or was he serious? "I hacked a spark plug with my soldering iron and made an inferior soldering iron."

@deepee8010 9 месяцев назад

Thanks this only strengthened my decision to turn it off after 1:30.

@CreativeHacker7 9 месяцев назад

I recommend watching my other videos!

@michelleclere8855 9 месяцев назад

@@CreativeHacker7 Non merci. Avoir goûté de vos khonneries une fois suffit très largement.

@fincrazydragon 9 месяцев назад

He doesn't need "tricks", he just needs to learn how to solder.

@fetus2280 9 месяцев назад

Exactly. This is bloody nonsense.

@g120957au 9 месяцев назад

This is a temperature-controlled iron, clean the bloody tip with a wet sponge and it will solder beautifully, what you have done could catch on fire

@adoreslaurel 9 месяцев назад

I bought a small Electric soldering iron a while back and the rod was ferrous metal, I thought they should all be copper tips?

@ReptileRescue 8 месяцев назад

Exactly was my thought right away.

@Oxyopes 8 месяцев назад

has't heard of flux

@DDGVET4 9 месяцев назад

Wouldn't a cotter pin and a nail worked just as well? Besides that, if you pre-heat the copper wire before you attempt to tin it, the solder flows much smoother and faster.

@CreativeHacker7 9 месяцев назад

Thanks for your opinion!

@watcher818 7 месяцев назад

Right! HEAT THE WORK, let the work melt the solder. Just a little on the tip to make good contact and wetting action. Giving this stupid video a THUMBS DOWN.

@ddemko100 9 месяцев назад

I think the issue is your skill level and not the soldering iron itself...

@CreativeHacker7 9 месяцев назад

Thank you for your opinion

@valdirplinta1509 7 месяцев назад

Era só limpa com uma lixa a porteira do ferro e pronto já funcionaria perfeitamente, e não está gambiarra mal feita ai.

@tonsssedell4318 9 месяцев назад

This is a pointless solution to a nonexistent problem. What would work is learning to properly solder. It's easy and there are lots of tutorials on RU-vid.

@CreativeHacker7 9 месяцев назад

Thanks for the advice! Have a good day!

@fawzizaakraoui 7 месяцев назад

@chilledoutpaul 9 месяцев назад

Have you ever thought to clean and look after your soldering iron tips, I have brass wool to clean my tips with and flux to dip the tips in this conditions the tips too, I have 3 tips of different sizes and I change the tip size to what i am working on!

@Lelembut150 9 месяцев назад

Benar, saya setuju... Bukan merubah soldernya.

@martin4787 9 месяцев назад

And using cored flux solder and even better, buying a pot of flux Paul 🙂

@sirbollocks609 9 месяцев назад

Agree completely, never had any problems tinning wire

@CreativeHacker7 9 месяцев назад

Thanks for your advice! Have a good day

@user-jt4ye7dw1lShalu 8 месяцев назад

КАКОЙ -ТО ГИМНОГЕНОАЛЬНЬІЙ ДЕБИЛИЗМ !!! РОБИН , РОБИН КУДА ТЬІ ПОПАЛ ?- ТА ВСЕ ТУДА: В ДЕТ- ЯСЛИ - "ГЕНИЕВ" !!! 😂🤓😜😸🐸

@wheater5 9 месяцев назад

Why go on RU-vid and advertise the fact that you have no idea how to use a soldering iron?

@simon6071 9 месяцев назад

And shines his own shoe at the same time by calling himself a genius when he is not.

@CreativeHacker7 9 месяцев назад

The video was made for experimental purposes, if you do not have a soldering iron tip at hand! Thank you for your opinion!

@simon6071 9 месяцев назад

I have an amazing tip for anyone who have problem with solder not sticking to metals to be connected with soldering. It works even on stainless steel surfaces. 1/ Use a cotton swab to apply some LIME-A-WAY onto the metals to be soldered. 2/ Wait a few seconds for the acid to work before soldering. 3/ If the solder still does not stick to a metallic surface, scratch the surface with a utility knife and repeat 1 and 2.

@antediluvianatheist5262 8 месяцев назад

@@CreativeHacker7 How in hell would you have a soldering iron, and no tip?

@allanclose4181 9 месяцев назад

If you mount the copper wire sideways and put the heat under the copper wire you will heat up the copper wire and then the solder will transfer onto the copper wire.Also clean the soldering iron tip with fine sandpaper or steel wool.

@Critical-Thinker895 9 месяцев назад

He has no skilz for soldering. None of that was right lol.

@jarnosaarinen4583 9 месяцев назад

complete wast of 3 minutes@@Critical-Thinker895

@michaelmurphy1127 9 месяцев назад

Precisely

@ambydaly5713 9 месяцев назад

Someone needs to visit the car part store where they sell a proper spark plug tool with an insert to hold the plug while screwing it in to the engine. This guy is nuts.

@CreativeHacker7 9 месяцев назад

Thanks for the advice! Have a good day!

@CreativeHop 12 дней назад

This video is amazing! This guy is a genius with amazing creativity and skills. The act of inserting a spark plug into a soldering iron not only shows ingenuity but also shows a deep understanding of how devices work. I am amazed by how he does it, and this will definitely inspire many others in the welding and fabrication field. Thanks for sharing this interesting video!

@CreativeHacker7 4 дня назад

Thank you for your kind words! 🙏🔥.

@PHarrington 9 месяцев назад

Here's an idea "just get a larger soldering iron" no charge for that Genius suggestion.

@rodnyg7952 9 месяцев назад

just clean the tip of your iron correctly, add some flux to the copper, and heat up the copper before adding solder to it

@CreativeHacker7 9 месяцев назад

The video was made for experimental purposes, if you do not have a soldering iron tip at hand! Thank you for your opinion!

@rodnyg7952 9 месяцев назад

@@CreativeHacker7 wrong, you had a tip at hand. It was in the video. If that's the case, then don't have it in the video. You contradict yourself and make no sense

@tbirdtezdean2486 9 месяцев назад

keep the tip clean on your iron, what a mess at the end LOL. you haven't the first idea how to solder, and have you ever heard of flux ?

@troubleshooter1975 9 месяцев назад

This is the best and most effective way of trying to break your ceramic heating element! (They don't take kindly to lateral pressure when the guard tube is off) I wouldn't be surprised if he opened it again to find the heater element broken loose at it's base, and hanging by it's mains leads! DON'T TRY THIS AT HOME...

@mattsauro8881 9 месяцев назад

Maybe he should try using the actual tip of the soldering iron where the heat is most concentrated and what it's made for. Also for that gage wire, you don't use a soldering iron also known as a soldering pencil. You have minimum use a soldering gun with broader tips and higher heat ranges. I'm all for new ways of doing things but try the right way first!

@deepee8010 9 месяцев назад

Everything about this video is wrong and angers me and I’m only 1:19 into it!!!!

@deepee8010 9 месяцев назад

By 1:30 I rage quit and refuse to finish the video he doesn’t know how to use any tools properly this would only be excuseable if this were a child under 10

@imola23 9 месяцев назад

I didn't read all of the comments, so, did anyone mention that in the final 30 seconds he is using a different iron?

@pgupu 9 месяцев назад

Learn to solder properly clean your tip and retin it before you start.

@sprinterdriver4757 9 месяцев назад

Clean the tip and re tin.

@randomsender6291 9 месяцев назад

that would make sense !

@stanisawpazdzior3233 9 месяцев назад

Żeby zacząć lutować świeżą lutownica trzeba grod lutownicy odpowiednio przygotować - pobielić ją .A co do geniusza - cóż mam inne zdanie .

@pawelmacko3424 9 месяцев назад

Czym pobielić?

@kwasdeoksyrybonukleinowy 8 месяцев назад

@@pawelmacko3424 Cyną. A poza tym, do tak grubego kabla taka lutownica się nie nadaje, bardziej transformatorowa. No chyba ze ktos ma albo ogromną cierpliwość albo podgrzeje miedź np. palnikiem.

@Tips365day 5 месяцев назад

4:12 How wonderful! I really like your creative videos

@CreativeHacker7 5 месяцев назад

Thank you so much! 🤩 I'm glad you enjoyed the creative video showcasing the genius idea of inserting a spark plug into a soldering iron.

@WeldingMask 9 месяцев назад

どのような効果がありますか? オリジナルのはんだごてを使ってみませんか？

@Yanto-Kun-JP 9 месяцев назад

ライターやトーチの火であぶればもっと簡単ですね。

@johnharbaugh9471 9 месяцев назад

Clean your soldering tip and proper use of Flux, which may result in you having a totally different result. Just saying

@lupins48 9 месяцев назад

I guess this guy has never heard of flux? Even the most basic soldering requires it.

@CreativeHacker7 9 месяцев назад

I guess this guy has never heard of flux? Even the most basic soldering requires it.

@1506pinkers 9 месяцев назад

All he has done is change the tip of his soldering iron. I can do that, and I’m not a genius.

@robertolongoni9864 9 месяцев назад

Ha scoperto acqua calda

@carlarthur4442 9 месяцев назад

Yeah that's what I thought 😂

@Daniel_Antonio_Arellano782 9 месяцев назад

The metal is different. Iridium and platinum burn hotter. Along with copper and nickel which is what premium spark plugs have.

@1506pinkers 9 месяцев назад

@@Daniel_Antonio_Arellano782 I didn’t know that. Thanks.

@DIYTechTrends 8 месяцев назад

Great tool🎉 congratulations 🎉

@oldeagle2514 9 месяцев назад

May I suggest where you can stick your spark plug???

@Tips365day 5 месяцев назад

4:13 Subscribed to your support channel

@CreativeHacker7 5 месяцев назад

Thank you for subscribing to my support channel! I'm glad you enjoyed the soldering iron spark plug trick 🔥🔧.

@TheChiefWahooGuy 4 месяца назад

Excellent video. Teaches kids y they need to stay in school!

@CreativeHacker7 4 месяца назад

Stay in school and keep learning new things! 🔧🔥

@RokRoking2 2 месяца назад

That solder have adjustable voltage, no need to fuss around just adjust the adjuster according to your need

@CreativeHacker7 2 месяца назад

Adjusting the voltage on the soldering iron is key! 🔧👍

@Ahmet_Yilmaz 9 месяцев назад

After 3:42 , why did you change your soldering iron to different model ?

@robertkennedy1737 9 месяцев назад

This is complete BS, this guy does not know how to soldier. You heat the wire up until the solder melts when you touch the solder to it, you do not melt it with the tip of the iron onto the wire.

@Kr0N05 9 месяцев назад

Just get another tip - that one is clearly damaged (probably used for poking holes in different substances (Leather, plastic etc)). Soldering Iron tips have a very thin coating that can be easily damaged - people think if they press harder with a tip then it will work better, but by doing that you are damaging the tip. Always make sure the tip is well 'wetted' with solder before trying to transfer heat to the object you want to solder. Always clean your tip, after use, by wiping against a special wet sponge - turn off your tip and then quickly put some solder on it; this helps cut down on oxidation of the tip as it cools down.

@dmitriydmitriy9395 9 месяцев назад

Некоторые покупные паяльники уже, кажется, имеют жала из того-же металла или сплава, из которого сделана сердцевина свечи зажигания от или для автомобильного двигателя.

@tpi783 9 месяцев назад

Супер ❤️

@CJ-nt4cs 9 месяцев назад

What a waste of time and spark plug.

@topc5826 8 месяцев назад

got flux in your kit? does wonders when used with soldering anything, as does the right size heating tool, including keeping it clean, for the work being done

@christophbrauer2007 3 месяца назад

Better keep this a secret so the JBC guys can't come up and steal your idea before the according patent is approved

@CreativeHacker7 3 месяца назад

Haha, thanks for the heads up! 😉

@MedSou 28 дней назад

*Dear stranger whoever reads this:* . . 👇 *You’re amazing,I hope you have a great life with a lot of happiness* ❤

@CreativeHacker7 19 дней назад

Thank you so much for your kind words! I'm glad you enjoyed the video 😊🔧.

@timjenkins6963 9 месяцев назад

This is useless!

@spirosdapergolas7592 9 месяцев назад

waste of time

@joesmith9053 9 месяцев назад

if you hold the gun against the wire and get it hot enough the solder will work way better

@terencestokes2073 9 месяцев назад

Why not clean the original Tip first. Pointless video.

@BarrySmith-v3c 4 месяца назад

Using a bigger CLEAN tip and flux would have done the job without all this hassle!

@CreativeHacker7 4 месяца назад

Using a bigger CLEAN tip and flux would definitely make the job easier next time! Thanks for the tip! 😉👍.

@TimKeachie-o2e 9 месяцев назад

what is your point

@Ari-yt6gk 2 месяца назад

Terima kasih kawan ,, video ini sangat menarik

@CreativeHacker7 2 месяца назад

Terima kasih atas dukungannya! Semoga Anda terus menikmati konten kami 😊.

@Cornz38 9 месяцев назад

Absolutely pointless garbage.

@WilliamHuntLatheCraft 8 месяцев назад

When you solder for the first time, don't broadcast it on Youuibe 😳

@vilmostoth3096 9 месяцев назад

WASTE OF TIME

@philippe5394 9 месяцев назад

Please, please! Delete me that! I've just lost 4 minutes of my life!

@gilbertopatino2616 9 месяцев назад

Yes me too 😅😂

@seramot 8 месяцев назад

For every resistance soldering iron made in China, you only need to replace the tip with a copper tip and the soldering is great.

@oldriver1478 9 месяцев назад

what a waste of time

@dtr125 9 месяцев назад

So what exactly is the purpose of doing this? I presume if you had used the end of the soldering iron tip on the original one it would done done the same task. 🤷‍♂

@davidfalconer8913 9 месяцев назад

Waste of an ( expensive ? ) spark plug ( clean the iron tip , and the solder will tin it correctly ) .... DAVE™🛑

@zaperfan 9 месяцев назад

Use some flux it will make it flow much better

@BernardSamson-hf6fc 9 месяцев назад

Fake, The end result is a completely different soldering iron. Just buy a decent soldering iron.

@minnesanger5672 9 месяцев назад

Ich würde es mal mit Flussmittel versuchen. Anstelle dieses unverhältnismäßigen Aufwandes.

@steveburton2806 9 месяцев назад

Pathetic Trying to use that abrasive paper above grass Just learn to use a soldering iron correctly

@kitcarlson6033 8 месяцев назад

Get a temperature controlled iron, they help reduce tip oxidation.

@somemotorbikes1669 8 месяцев назад

I cant believe no one noticed he used a different soldering iron at the end ah ah ah it wasnt the one he modified OMG!!

@megeezer69 9 месяцев назад

All that was required to solder properly, was to clean the soldering iron tip

@chusdiaz9160 3 месяца назад

Impresionausss me quedausss! Osties !! Puñepresss! 4,4 K likes de atontaos

@CreativeHacker7 3 месяца назад

Impresionausss! Nos alegra que te haya gustado el truco con la bujía en el soldador 🔥. ¡Gracias por tu apoyo!

@joseaponte5353 8 месяцев назад

Trampa ese no era el soldador q saco primero

@dnitchke 9 месяцев назад

He is using two soldering Irons. You will destroy the heating element of the soldering Iron shown at the first of the video.

@JohnQuePublic903 9 месяцев назад

If you just took care of you soldering iron, and controlled the oxidation and properly tinned the tip, Preheat the copper and you'd get a gold solder connection.

@eR-MIK 9 месяцев назад

Widać, ze grot był źle użytkowany przez "geniusza" i zniszczył go. To co stworzył "geniusz" to nie grot lutownicy bo topnik się go nie trzyma.

@almassio 7 месяцев назад

Te apunto dos cosas: El soldador es muy pequeño para lograr calentar el cable y lograr que el estaño se adhiera. Segundo: Debes calentar bien el cable y bañar con un decapante, limpiador o resina. Ya vemos que tu invento no logra bañar en estaño el conductor como debiera ser. Insisto no hay proporción entre la sección de cable a estañar y el soldador. I'll point out two things: The soldering iron is too small to heat the cable and make the tin adhere. Second: You must heat the cable well and bathe it with a stripper, cleaner or resin. We already see that your invention fails to bathe the conductor in tin as it should. I insist there is no proportion between the section of cable to be tinned and the soldering iron.

@aloisius4188 6 месяцев назад

I watched this and still have no effin idea what the dude was trying to accomplish.

@CreativeHacker7 6 месяцев назад

You just witnessed some next-level innovation, my friend! 🤯🔥.

@redslover5293 9 месяцев назад

Why do you not use some type of soldering flux? I have never had this problem. Clean the tip, use the correct heat range & apply flux.

@JohnnyBrenesCarballo 2 месяца назад

Con solo que se tomara el tiempo de limpiar la punta del cautil . No tendría tanto derroche de Sabiduría. Es mejor que tanto trabajo.

@CreativeHacker7 2 месяца назад

¡Gracias por el consejo! 😊 ¡Seguiré mejorando para evitar derrochar sabiduría en el futuro!

@MostOfFun 9 месяцев назад

Oh Gott! die Bilder bekomme ich jetzt nicht so schnell aus dem Kopf 🤯... schöne Gedanken...schöne Gedanken...

@jaimesanchez6933 9 месяцев назад

Seriously? Learn how to solder.

@john-wk4ks 7 месяцев назад

REALY YOU WENT TO ALL THAT WHEN YOU JUST SHOULD HAVE USE THE SAND PAPER TO CLEAN THE TIP THAT WAS IN THE SOLDERING IRON ALREADY DONT KNOW HOW YOU CAN SAY IN YOUR TITLE This man is a Genius

@john-wk4ks 7 месяцев назад

AND YOU STILL DID A CRAPPY JOB ON THE SOLDERING AT THE END OF THE VIDEO EVEN THOUGH YOU USED A BLUE HANDLED SOLDERING IRON AT THE START AND A YELLOW HANDLED SOLDEING IRON AT THE END

@Unlimited_creativity 3 месяца назад

Like video ❤😊

@InventorJ88 3 месяца назад

Hay quá🎉

@onazram1 9 месяцев назад

Genius might be a bit of a stretch...

@midnightmusic1 9 месяцев назад

uhm it's magic, not only you replaced the tip, but also the blue solder iron in magicaly turned into an yellow one, with complete different tip mounting.... i think buying a new tip is better , safer and probably cheaper.....

@barney2633 9 месяцев назад

Not enough of a genius as to learn how to solder properly.

@behzadrasteen 15 дней назад

What is the advantages of this invetion?

@CreativeHacker7 12 дней назад

This invention allows for quick and efficient soldering, making the process much easier and faster! 🔥🔧

@RepairCreative 2 месяца назад

THIS IS GOOD IDEA. TKS

@CreativeHacker7 2 месяца назад

Thank you for watching! Glad you enjoyed the idea 🧑‍🔧🔥.

@dontolbert8973 9 месяцев назад

$6 spark plug, 25 minutes time, to ruin your soldering iron. Replacement tips for that soldering iron are $7 to $10 for a set of 10. Genius is not a term that should be used as a title for this video.

@MatoBlazevic-ed5wh 9 месяцев назад

Ds gosp. Je genije samo je onaj koji je prvi izu.ino lemilicu zaboravio za volfransku zic lp

@vitix5906 9 месяцев назад

dip the tip of your iron in flux to clean and coat your copper in flux and voila...best even tinning possible

@ertugrulosman5331 9 месяцев назад

bende izliyorum adam akıllı bir şey yapacak diye ilkin kalın lehimi gösterdi tabiki akar öyle bölümün sonunda ince lehim kullandı onun akmadığını herkes biliyor zaten

@thomaskuhr3227 9 месяцев назад

Wer keine Ahnung vom Löten hat, sollte auf solche Videos verzichten.

@pedropichardo674 Месяц назад

El estaño lo pega en el cautin donde no es

@CreativeHacker7 Месяц назад

¡Gracias por notar mi creatividad! 😄 ¡Espero que hayas disfrutado del video!

@jeffmoore4153 9 месяцев назад

What a stupid idea.

@AntonyClayton-eq1ul 9 месяцев назад

Ruined a new sparkplug - when he could have used the electrode of an old one.

@handbananaistherapist642 8 месяцев назад

or a nail

@bokkenka 9 месяцев назад

In the end, he got a more powerful soldering iron that he needed to heat up such a thick cable, and he still made a mess of it. Heat the cable and touch the solder to it, not to the tip of the iron.

@Audite-fabulas-hoerbuecher 8 месяцев назад

Was ist denn daran bitte genial? 🤪 Das letzte Ergebnis war schließlich keinen Deut besser als das beim ersten Versuch, nur daß es noch umständlicher erreicht wurde. Der eigentliche Trick liegt in der Nutzung eines Flußmittels, z.B. Kolofonium.🎯 Und am besten vorher noch die losen Drahtenden miteinander verzwirbeln. Dann klappt das ganz ausgezeichnet und man muß dafür auch kein Genie sein.😉

@domo8676 9 месяцев назад

That was a waste of time and solder. The poster should buy a book on soldering and how to care for tips.

@justmyself1000 8 месяцев назад

Would have been quicker and better if better soldering techniques such as preheating the copper wire strands....and removing solder tip and using that sand paper on the tip...then reinsert and reuse the original solder tip.

@aytaskaya 8 месяцев назад

Bende sonunda cok süper bir lehimleme yapma ozelligi olacak sandim.orjinal ucu bence daha iyi lehimleme yapar yeterki kullanmasini bil

@gennarocaputo9469 7 месяцев назад

You must be joking, right? I can't believe that I even watched it.

@CreativeHacker7 5 месяцев назад

I guess it was pretty surprising, right? But hey, sometimes genius ideas can seem a bit crazy at first glance! 😉

@Christopher.Thompson 2 месяца назад

Hey! For many peoples, this video surely seems absurd and unnecessary. It is true that you can do what he did with any soldering iron. Just yesterday I did it. However, why not take this option, if one day your soldering iron tip no longer works in the middle of the night and you need make a job? Why not have it as a plan b before judging that it is garbage or lost time? Personally, for me it is not lost or garbage... in a lot or a little, each video has something to learn. Don't be ungrateful or bad! Believe me, it is not easy to make videos no matter how "unnecessary" they may be, they take your time and dedication. 😢😢

@CreativeHacker7 2 месяца назад

Why not keep it as a backup plan? You never know when it might come in handy! 😉.

@Christopher.Thompson 2 месяца назад

@@CreativeHacker7 Exactly! Hughes!

@RyshusMojo1 9 месяцев назад

Pro Tips: • Learn how to solder properly • Keep soldering tip clean with a copper scouring pad, wet cellulose sponge (not foam rubber), or flux • Heat up the part to be soldered with solder gun/pen, then let the part melt the solder • Internet search "NASA soldering techniques" • Never, ever refer to someone soldering like that as a genius.

@leefalvey9670 9 месяцев назад

I just use a butane torch for bigger copper wire works great

@helmutsandner4823 9 месяцев назад

Schade um die neue Zündkerze 🙈

@wvsky 9 месяцев назад

What the hell was that all about? I've been Click Baited AGAIN!

@wittwittwer1043 9 месяцев назад

First, that was a lot of trouble to go thru for a lousy solder job. Second, it the jobber had taken the trouble to use soldering flux on both the soldering iron and the copper wire, it would have been a more professional job.