This might be the worst fitting eBay or Amazon part I've tried... Voodoo Banshee Part 4

Подписаться 237 тыс.

Просмотров 100 тыс.

50% 1

This might be the worst fitting eBay or Amazon part I've tried... Voodoo Banshee Part 4
#yamaha #2stroke #build
It's not looking good for these eBay/Amazon plastics... What are your experiences with aftermarket plastics? Thank you for watching my video, you guys ROOOOOCK!!!! 🤘🤘🤘
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Get OEM Plastics (Go to OEM Section) - bit.ly/34i3XLj
Boss Rotor Hub - ebay.us/X6vlIR
Aluminum Sprocket - bit.ly/3oyU3MJ
Billet Gas Cap - ebay.us/MP7piH
Anti-Seize - bit.ly/3spXIgJ
T-Handle Allen Set - bit.ly/3LhoTDe
Stud Kit - ebay.us/ZRZ4NL
Modquad Head - ebay.us/U4D9Ig
Chariot Head - ebay.us/ARjA6C
BP Racing Lockup Cover - ebay.us/CdDWcW
ModQuad Lockup Cover - bit.ly/3ry1CFj
Streamline Levers FOR YFZ450R - ebay.us/BRhTsr
YFZ450 Calipers - ebay.us/6jgchz
Front Brake Lines (Need two 150CM) - ebay.us/UNLVcR
Rear Brake Line - (60CM for -1 Swingarm) - ebay.us/g8cTWs
Typhoon Front Rotor - bit.ly/33DgUPR
Typhoon Rear Rotor - bit.ly/3KyhMFW
Brake Lever - ebay.us/GvVJB5
Pro Taper Bars (ATV High Bend) - bit.ly/3uknPXD
Grips - bit.ly/34AiqlX
Urmosi Thumb Throttle - bit.ly/3sm71OV
Urmosi 720 SBC Clamps - bit.ly/3HMdLMg
Pipe Hangers - ebay.us/89Ntyb
SLP Exhaust - ebay.us/4Gmc3M
FMF Exhaust - ebay.us/24pAhJ
FMF Silencers - ebay.us/NL23KF
CPI - Unavailable
SPONSORS/COMPANIES I TRUST
Rocky Mountain ATV MC - bit.ly/34i3XLj
Rocket Ron - rocketronracin...
Kenda Tire - www.kendatire....
BPRacing - bpracingatv.com
DRW Performance - drwperformance...
Urmosi - urmosi.com/
Bonehead Performance - boneheadperfor...
Wicked Metal Designs - wickedmetaldes...
SV Innovations - / shell.vest
ModQuad - www.modquad.com/
MERCH - michael-sabo.c...
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.

Авто/Мото

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 366

@MichaelSabo 2 года назад

It's not looking good for these eBay/Amazon plastics... What are your experiences with aftermarket plastics? Thank you for watching my video, you guys ROOOOOCK!!!! 🤘🤘🤘

@kdcustoms1272 2 года назад

I got the updated polisport plastic kit with the updated air box for my 04 yz250. Looked great until I tried to wheelie while standing 😳 now my rear fender got a nice stress mark across it lol. But it went back to original shape. Nothing a decal can't hide 😜

@TTR66 2 года назад

Aftermarket Plastics dosen't fit & Look Like OEM I don't Use them,If i can't restore the original one!I Search WorldWide For new old Stock!No Compromise!I am a Numbers Matching Oldskool Dude.Smile

@TTR66 2 года назад

Thanks,you Doing great JOB10-10!!but i Understand it's,Not possible to get all those Parts in Time to Run a Channel!Viewers can Not wait years!Big Big Smile

@MichaelSabo 2 года назад

@@TTR66 thank you man! Yes, waiting for parts is one of the biggest obstacles I face

@AlejandroGonzalez-nz5nw 2 года назад

Drag cut them

@PeteHager 2 года назад

The banshee is coming together well man! I’m so stoked for the next vid! I love how your weighing everything, the technical expertise you’re bringing to your content is beyond priceless! Thanks for all your efforts! 🙏🤘

@MichaelSabo 2 года назад

Thank you Pete! Sorry you never got to ride the 421 but this time around.... you have to try the Voodoo Pete! 🤘

@Davido50 2 года назад

Hes an incredible quad builder for sure Pete!

@PeteHager 2 года назад

@@MichaelSabo I would be honored to ride this machine when it’s finished! The best part is you’re building it to be trail focused, it’s gonna be a ripper man! 😬

@DUNEATV 2 года назад

Dude, your videos are so good! It’s incredible!

@MichaelSabo 2 года назад

I appreciate that bro; means a lot 🤘

@Davido50 2 года назад

Hes best of best!

@PROTEUS_SEER-OF-EONS 2 года назад

These are the best production videos of any consistent you tuber I've seen with TONS of useful info, not just stupid entertainment. Thank you!!

@pbpaulieb 2 года назад

I HAVE THE ULTIMATE TRAIL BANSHEE, but I find so much entertainment watching you build yours! Keep fab'in up stuff and trucking along. Your plan makes alot of sence so far.

@Medusaxo 2 года назад

Love the effort you put into your production, no one’s putting in the work these days

@SukiInDubai 2 года назад

The weight reduction on the parts is the most interesting 👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻

@BraapEffex 2 года назад

Wow that's crazy! Thanks for taking all the time doing a video on this! Some people might not care about fitment, just happy to have non cracked plastics, lol... Awesome Vid!

@TBone1234561 2 года назад

I've had ebay/Amazon plastics before they've never been too bad to move around like you said with a heat gun but from very young age dad taught me you work with what you got unless you absolutely can't but 30+ years in a wheelchair as a mechanic can test you lol everything i learned was from him after going to a university for high performance automotive i still learned more from my pops than any school has taught me

@miked596 Год назад

Love the videos man! Just a tip. When you cut plastics. Use the blue tap and put on the side you're keeping. Cut off the piece but dont touch the blue tape line. Just get close enough. Then go with a sanding block and sand down to the blue tap line. Peel off the tap and thank me later. I discovered this on my own and the lines come out super streight.

@MnWarrior350 2 года назад

Can't wait to see you Ripping this thing in the Woods! This Build project is on another level man.

@mrPancho003 2 года назад

Your videos really do help out a lot I’m currently rebuilding my trx450r your videos gave me some confidence to do my own work

@MichaelSabo 2 года назад

Awesome to hear this man! Glad I can help you out 🤘

@tyson8580 2 года назад

hes new way of filming and talking about the stuff is so good he should have way more subs

@Brax2700 2 года назад

Obsessed with your videos, itching every day for a new video! Happy to come home from a long day and sit down and watch.

@owendorsey707 2 года назад

That’s hands down the best name “voodoo banshee”

@hidinfrombiden6251 2 года назад

At 10:08 with the little mishap with the T-handle as soon as he said "oh shit" a Charmin Toilet Paper ad started playing instantly on my end😂😂😂.

@Bree0814 2 года назад

Dude it’s still lighter and we got some time! It’s badass lol I’m so excited I love these hour long videos

@jaimyswek 2 года назад

Most underrated youtuber! Recently started watching and i love it

@d4rky_60 2 года назад

micheal, i like how your videos progressively get better every time i watch because everytime you surprise me with the new edit / intro and i like it

@rickyhernandez995 2 года назад

Funny as hell with the rubber off the clamps “bear kill it” 😂 keep it up bro love it🤘🏽

@daryleduardo7055 2 года назад

Dude you are really funny in this video this man she's going to look sweet it's going to run awesome man the port matching looks really cool

@CountryFreshChameleon 2 года назад

I love the weight savings part of this build, I do the same thing sit and think where unnecessary weight can be cut 💪💪💪💪

@andrewstahl6916 2 года назад

This series is making me want to buy some of these parts even though I don’t need any of them lol

@MichaelSabo 2 года назад

Oh man, I'm the same way; it's hard not to want to mod out your machine once you see the parts

@andrewstahl6916 2 года назад

@@MichaelSabo man, I’ve only had 1 experience with aftermarket plastics and it was a set of maier front fenders, pretty sure we messaged a little about it on instagram, but I had to use a tool to extend the holes on the front since they didn’t line up properly, also has an issue similar to yours with the front brackets not reaching without a bunch of force pulling them down.

@MxShee 2 года назад

I pressed pause and did it, damn it lol 😂

@marklloyd3513 10 месяцев назад

I don't need to watch you work bro because it's the highest quality workmanship boss but i will watch it awesome

@johnbruzzi4381 2 года назад

Trail machine 80 hp crazy go for it Mike. Mike that hp number will beat you up for sure!! Your videos are the best love them all, wish you could drop one a day

@tjamez9910 2 года назад

Awesome video, love the long vids. Hope your recovery is going well!

@manaaalsuwaidi3643 2 года назад

Awesome video man! The URMOSI destruction test is so hilarious 😂🤣 good work man keep it up!👍🏻👍🏻👍🏻

@williamneske6452 2 года назад

Ive been waitin all day for this

@MichaelSabo 2 года назад

Thank you for waiting bro!

@nicolasdelage2813 2 года назад

For losing more weight, you sould put a dynoport 2 to 1 pipe and silencer

@MichaelSabo 2 года назад

Good idea for weight but I didn't like the dyno charts I saw from them so I'm not sure it would go with my engine setup.

@waylon7371 2 года назад

Gen 1 Sabo work is spot on brother! 🤘🤘🤘 Looking amazing and cant wait for the next video!!

@MarioLopez-zd5kp 2 года назад

Man all the things you geting for you súper build cant wait to see this banshee done

@christopheravery5808 2 года назад

I’m hooked on this build already. I had an 87 banshee so the whole J-arm thing has my attention

@kevinconnors9396 2 года назад

Hell yea man things coming out sick. Im more of a dirtbike guy more places i can ride in my area dirtbikes only but I love watching the builds. Its awesome how in detail you go with your thought process on parts. Its also good to hear why you picked certain parts. Keep up the good work its great to see

@Crazmechanic 2 года назад

Taking weight loss to a new level putting yourself on the scale as well😂another great vid as always

@jakekatalinas5448 2 года назад

She’s coming along great 👍

@Derekmoss82 2 года назад

You build the nicest looking quads I’ve ever seen.we have the same taste in style and look. Your videos inspire me to make some builds. But unfortunately I’ve never been able to save money to buy one to rebuild. I dream one day of being able to own a banshee and if that ever happens I will do a sabo inspired banshee build. Unfortunately I’ve lived a life of horrible luck. I’ve been able to get some small quads and dirt bikes for my kids but now that there getting older I haven’t been able to get bigger ones. I dream of owning a banshee literally almost every night. Hopefully god will let that happen before I’m to old

@chandlertremblay1128 2 года назад

I almost impulsively bought those plastics after seeing them in the last video. Am I ever glad I'm in Canada and couldn't get them anyway, Lol. I feel your pain Mike. I can't find a decent set for any less then $1600, so I remain fenderless. Great episode!

@MichaelSabo 2 года назад

Phew, I'm glad you didn't man; I wish I would have stated more clearly to wait for test fitment before ordering

@kennethlittle5395 2 года назад

I've bought aftermarket ebay plastics for my 1985 Honda 250r ATC and had no problems except my shrouds only because I'm using and aftermarket 5 gal desert tank

@ttatvoffroad2632 2 года назад

I cant wait to see a quad warz with this quad. Id love to see how it stacks up against your 250r in the woods. Im guessing the 250r takes the money but hey the voodoo aint even ready yet.

@MichaelSabo 2 года назад

It's hard to say; this thing should handle entirely different than it did. We are already planning the competition series 🤘

@dennisbrooks186 2 года назад

Man I'm glad I didn't pull the trigger on plastics!!! And I had no idea oem were that cheap. Everyone I see them they r like 850 900. So I deff gotta go see rmatv. Really want full set of blue for my next build. Killin it with this series. Really good work on the port matching too. If ur waiting for motor assy dude u should really look into shift drum bearing mod and shift shaft bearing mod. Mechanical hulk could machine u up ur lower case in a jiff, order the correct size bearings, and that gives u a bearing behind shifter seal and on opposite side of the shift drum. Would compliment ur other trans mods freakin sweet dude!!!

@MichaelSabo 2 года назад

I almost did those two bearings when I did my banshee the first time around. My trans shifted really nicely the way I had it setup or else I'd definitely take some time and do as you suggested. I'm not sure why people ask those price on eBay; I guess they're counting on people not checking on OEM sites 🤷

@chrisberndt25 2 года назад

It's not even my quad and I can't wait for it to be finished lol love the videos bro!

@johnstancato8785 2 года назад

I'm glad you're sending them plastics back cuz that's just terrible with a build this nice you at least want him to be a lot better fit than that

@bigc7t 2 года назад

Or.... You could even just make a ring spacer out of 1/2 inch polycarbonate, or 1/4 inch... However thick it needs to be... You could probably do that in your garage? For the black bp racing cover... Just a thought.

@MichaelSabo 2 года назад

That's a great idea man. It might be more involved because of where the rear brake pedal sits. On the direct drive cover, it has a recession for it and it still hits. Definitely like this idea though man!

@BostonBanshee 2 года назад

This is amazing ! I’m so pumped for this build mike, I had a feeling about the plastics I just hoped they were ok, I was gonna ask you have you hurd anything about FORCE RACING? They make pipes that are almost T5s but for $550 raw finish, I was looking into them they are new just wasn’t sure if you hurd of them.

@MichaelSabo 2 года назад

I did look at force racing and I think you're right; they look like copies of the T5. There's another company that make a pipe called the "T9" that is also a copy of the T5. I haven't personally tried either of these but I'd imagine they run okay if they're well constructed copies.

@stevencarter3290 2 года назад

cheap copies. Don't even bother

@BostonBanshee 2 года назад

@@stevencarter3290 I’m not I was just curious if anybody has ever tried them

@BlueNoseParaCanoe 2 года назад

Imagine the combo of the soft bar clamps and flex bars. I think you'll have the best of both worlds put together

@bigc7t 2 года назад

Mike,just have a aluminum ring/ spacer made and you can use the black cover. Basically a spacer and longer bolts... But a half inch or something and you can use that cover. Idk may be cheaper to get the other powder coated?

@ni_wink84 2 года назад

I wish I could go back and tell you to buy a set of 2006 special edition OEM plastics, that’s what my banshee was and it had “carbon fiber” looking pieces and very nice black plastics, great job as always mike! Love the banshee build

@staygold902 2 года назад

Best atv videos on RU-vid Mr Sabo 👌

@MichaelSabo 2 года назад

Thank you Andrew!

@claudeoconnor4084 2 года назад

"gen 2, probably not gonna happen" should be a shirt 😂

@MxShee 2 года назад

“Am i turning crazy, yes” with face upside down on the back of the shirt. Would buy that

@MichaelSabo 2 года назад

Lmao 😂

@IFIXATVS 2 года назад

I used two sets of plastics made by this exact company (Seven Blacksmiths) for two different KX85 dirt bikes and both sets were spot on. Hopefully it was just a fluke!

@chrisyeahbuuwassrileegowyn9279 2 года назад

Loving the weight detail concept, as well as the parts selection concept. Video on point as always..✌🤘

@NephewJamie 2 года назад

Great video once again fr! Me and my two friends bought 65cc plastics bikes back in 2021 and each pice barley fit, there’s definitely something going on frfr

@jordanpanich 2 года назад

Look forward to each one of your videos!

@foxpuremage 2 года назад

You might need a new guard dog. Doesn't seem too vicious 😂

@joenewberry5912 2 года назад

Really glad your happy with the pipes. If you ever need anything Cerakoting done just ask. I just did my axis shock bodies. Keep the long videos coming. Really enjoying them

@christopheravery5808 2 года назад

So, Saturday night I slipped on ice and broke my ankle and leg... so right when I’m doing pretty good after shoulder surgery now I am getting a plate and like 8-12 screws in my ankle and leg. Needless to say, I’m held back longer on building my quads 😤

@hall83 2 года назад

Banshee is looking awesome.

@MichaelSabo 2 года назад

Thank you Jeremy 🤘

@robland6118 2 года назад

I love the builds man. I do really wish you would do a build out of the norm. Maybe if you would build an LT250R maybe it would give the guys a chance to see where to get parts. Everyone has a banshee, the honda 250r, or the quadzilla. A lot of guys out here, like me, have an old LT250R. I understand they may not be as diserable by some, but believe there are some that have and love them. I love the channel and I love your builds. Just was hoping you would do something different from the norm. Something that's more challenging to find parts for. Maybe if you would do that than some of these places would start making parts for them again or start making parts for them now. Thanks man. Hopefully you will give it a thought. I seen your friend John had a video with an LT250R a while back.

@bryscynkurr 2 года назад

I learn a ton form you man! I’ve watched most of your rebuilds, great information on everything

@charliebeers2013 2 года назад

I found a 1987 brand new old stock Honda 250R I am thinking about buying for 8k. Your videos make me want to buy something rad.

@chrisewing7275 2 года назад

if its yet to be revealed dont say but im really interested in what carbs you will be running i have the same alpha cub cylinders with fmf pipes and stock carbs and btw really love that you are doing this build you must be the first to document it becuase i have searched and searched but found nothing on the alpha cub cylinders at least before now so thats really cool man. looking forwar to the end result.

@jonsheets6392 2 года назад

I’m gonna tell my kids this was Jonny bravo

@MichaelSabo 2 года назад

Bro I should see if he'll collab with me 😂

@Djskmsk69 2 года назад

Love the videos, The banshee is going to look nice 🔥🔥🔥

@mikeyboost4life69 2 года назад

Killer upload Mike! Keep it going man! We all lose our minds are there! You're all good man like always looking forward to next one!

@Ondamon375 2 года назад

Not sure if you noticed this but I’m 18 min into the video where your going over your cases and why you can’t run the sleek flat black one, it appears that the polished case has an extension on it that the lexan is bolted to that is the same bolt pattern and and diameter as the clear lexan on the black case… so you may be able to just move the extension cord ver to the black case… it appears to be an extension made just for fitting that piece with the fingers

@jaydingarcia899 2 года назад

hey mike i love all your vids but i was wondering if you could do a Tutorial on how to do a top and bottom end rebuild i know a thing or 2 about bikes but i would like to learn more bcuz sometimes bringing your own stuff to the mechanics can be a lil pricey it would be awesome 👏🏼.

@miguel.a.lefebre 2 года назад

Appreciate your content! I can’t wait for the URMOSI in-depth review. Really interested on getting a set for my own Banshee.

@david-blues 2 года назад

I'd appreciate a video about the handbrake removal from the rear brake caliper, I own the same caliper and I was just thinking about some weight saving removing it 👍 thanks !

@dadzilla6662 2 года назад

Broooooo those CPI pipes are super sick!!

@captainjwcvlogs5831 2 года назад

Love the videos brother ive watched all 4 parts completely and love learning and watching what your doing! keep up the great work!

@michaelquinn2583 2 года назад

Fav content on RU-vid

@4.5.0.Garage 2 года назад

Good vids lately loving this build

@OdysseyOffroad 2 года назад

Coming along nicely bro, to bad about the plastics. No way i could live with that fitment either. send that shit back!

@kennynadeau17 2 года назад

bunch of interesting stuff going on here!! keep it up👊🏼✊🏼

@peytonismyname9258 2 года назад

you need a little keychain for merch! i would buy for sure. love your vids man

@roynelson7613 2 года назад

You could get with the RU-vid channel time machines he has done a bunch of these and he's had good and bad luck off of eBay Amazon he just finished one up but you really got it going on man you're super smart you know how to get this bad mama jama to the best of its ability can't wait to see it you rock brother, 💯💪🏽💪🏽♥️🤙🏽🤙🏽😎👊🏾

@MxShee 2 года назад

Man thanks for the brake pedal idea, been looking for one like that for a long time, just paused and ordered the same in red lol

@MichaelSabo 2 года назад

It's legitimately pretty nice. Mine just took forever to get here because it came from chine 💀

@MxShee 2 года назад

@@MichaelSabo i saw that when i ordered, good thing im not in a rush with this build hahaha

@rmzjohnon 2 года назад

Back in the early 2000's you had to buy 4 sets of plastics and one or maybe 2 would be correct. The equipment to press them is so cheap the first run would be small the middle run would be perfect and the final run would be oversized as the parts wear out

@joemusicman64 2 года назад

That heavy ass music at 46:30 was cool. Who was that? Noticed your music is always heavy cool stuff. Love it.

@the1320king 2 года назад

You should buy full bore plastics get fit and really look amazing

@dadzilla6662 2 года назад

Lovin the build man for real🤘🤙

@soccerk3519 2 года назад

Bro this build is gonna be so sick💪

@johncordova2089 2 года назад

Your videos are great! Your attention to detail is incredible! The only thing that bothers me is cheap Chinese parts especially on such a premium build.

@danebowen729 2 года назад

45:20 is an amazing shot, lol. Keep it up, this is a great watch. BTW - JJ&A aluminum axle would be killer on this thing, and save HUGE amounts of weight. But not sure how the aluminum axle would fare on trails. But man, weight loss would be substantial.

@mikeEshroom 2 года назад

I'm going order 2 of the thumb throttles 1 for the banshee and 1 for the LTR450 I'm just waiting for everything else I want to be in stock so I can order everything at the same time.

@Monkeigh7 2 года назад

Should go with Maier they have great plastic and line up very well.

@GamerGavin04 2 года назад

Man im in this facebook group for my car right, and so lots of people in the group have nice builds and they look very quality. Everyone in the group tho always recommends going on ebay for parts but thats IMPOSSIBLE. It either doesnt fit right or its cheap quality which really sucks because I cant even trust ebay anymore 😂 Anyways love the vids man, the banshee is gonna be a BEAST

@bobbymckinney1264 2 года назад

You keep putting the voodoo in that motor,it's going to be wicked fast,the pipes look killer man..

@chrisbrewer3333 2 года назад

The yfz450 front calipers also bolt right up to a 400ex

@MichaelSabo 2 года назад

I didn't know that; thank you for the info!

@chrisbrewer3333 2 года назад

@@MichaelSabo did ny last 2 400ex with yfz450 front calipers. Big upgrade and direct bolt on! Just incase you ever do another 400ex project

@austingilliland4732 2 года назад

You are killing it mike looking very nice loving it

@racerx9223 2 года назад

If you haven't tried them out you really should try the pro taper pillow type grips, they're really comfortable and super grippy in the soft compound

@johnk7093 2 года назад

nice video... Im 6-6, and am looking for bar risers or taller bars so I can stand up with out bending over... these urmosi might be the trick for my polaris.... thanks for posting this.

@purplelink9134 2 года назад

Pretty gnarly thinkin that this quad is almost gonna make as much power as my car came out of the factory with

@carterdonar1246 9 месяцев назад

Bought some plastics like these in damn near new shape on marketplace for $65, again didn’t fit worth a damn but they’ll get me by for a while!

@joemusicman64 2 года назад

You took that well. I'd be livid about the plastics. WTF were the thinking? And yes how do they stay in business if they sell this quality of product. Liked the comment....Because stopping is cool...No it's not. Lol.

@goatboss3616 2 года назад

Them high bars a nice for tall people got a set for my yfz over a bar riser cleaner look and comfortable sitting or standing I'm also 6 foot 2

@gage5104 2 года назад

I love the content and I cant wait to see how this quad ends up, nice job man.

@donaldmerrill2352 2 года назад

I feel like you should add a dirt bike throttle to it because I always had trouble with the thumb throttles and the dirt bike ones work better

@noahpeters1851 2 года назад

I bought Vito’s plastic they fit a lot better then those others eBay plastic they also have to hooks on the rad plastic .

@MichaelSabo 2 года назад

Thank you for the feedback man; I'm hearing good things about Vitos

@noahpeters1851 2 года назад

@@MichaelSabo I have 2 sets of Vito’s plastic one fits absolutely perfect the other needs a little stretched but nothing to bad . . Try factory 43 nerfs they are pretty light and you can take the heal guard off and it’s all nets no extra metal. I use them on my motor-cross banshee. I wish I saw more banshee with then they are pricey.

@MichaelSabo 2 года назад

@@noahpeters1851 i saw that they made them but I couldn't find a pic. I have F43 on my 250R and I love them. I'm gonna rock these because I put in so much time to make them. Realistically, they're not going to make much of a difference; I'm just obsessing lol

@noahpeters1851 2 года назад

@@MichaelSabo I think I sent some photos of my banshee to you with the F34 nerfs on IG. I’m going to take a lot of inspiration form your build next tear down . Going to try to shave unnecessary weight on my banshee