IDK Why this video was recommended to me by youtube, but, that was incredibly generous of you to teach those men how to properly do the job, incredibly respectable.
I am a retired electrician with over 50 years in the trade, and I have never seen so much NEC violation in one home as you've shown! And that general needs to have his license revoked or at the least suspended. His job is to check and make sure all subs are licensed. When it comes to electricity, you don't take dangerous short cuts, use untrained help without having a journey man to check the work. That is a scary house to live in. And the local code enforcement needs to be reprimanded for their passing of such dangerous work! Appreciate you uploading and sharing this with the general public to see.
I have no electrical background, but I do know that this is beyond insane. I hope you continue to have good work on your horizon. I watch alot of random videos on youtube and this has perhaps been the most informative video without directly meaning too. You seem very educated, skilled, and serious about your work/passion.
Thanks for watching, though you didn't know the reason. Take photos if a contractor works in you house or your friend's house. It may benefit you . . .
The "buddy system" was in effect in this picture. The general contractor and inspector were buddies... The inspector asked the general if an electrician had done the work, and the general said "sure" so, without looking at anything, the inspector signed off. It is obvious from these pictures that no licensed electrician did the work, and no actual inspection ever took place.
Absolutely unbelievable! I’m a retired electrician after 40 years and I have seen some real nightmares, but never have I seen anything like this. This is downright criminal in my opinion.
Teaching them how to do it: million and one points for you, that was awesome way to handle that problem. Many would've just mocked them when it is the employer who needs to make sure their workers know their stuff.
I was an Electrical Inspector in Oregon after working many years as a General Journeyman, and have been retired since 2004. Generally, in Oregon we tried to feed the power to a lighting circuit in at the switch and run the legs up to the various fixtures. We tried to start outlet circuits near the panel and run through the wall, around the house. I avoided putting hot wires in the attic if I could, knowing that if anything went wrong, I might have to get up there to fix it. Generally speaking, lots of California trained Electricians fed the power to the fixture and the switch leg went down to the box containing the switch. I didn't last long as an Inspector because of what I saw going on.
It is now the code that the circuit comes into the switch box because neutrals are required in the switch boxes. I have always come into the switch and ran switch legs to the lights. I hate trouble shooting when I have to remove light fixtures. I would much rather stand up at the switch box and check the wiring. Who wants to be on a ladder, maybe over someone's bed and troubleshoot? I have found in many apartment building all of the circuits run through the light boxes. The wiring is usually 75° C wiring and the insulation is damaged because of too high a wattage of light bulbs, (too high ambient heat) and then you end up having to fix the wires with loom and tape or worse from the attic or open the ceiling. Thanks for sharing your experiences.
We started making repairs, which are seen in this video, and the general contractor paid me for that first day, and then . . . then . . . then . . . he convinced the husband homeowner that I was charging him too much money. He convinced the husband to let him finish the corrections. A subsequent re-inspection, and it was passed again. BUT I have been back to the house for subsequent electrical problems and at a "glance" I saw much that he did not correct. The wife believes in me and I worked for her on two corrections. How the inspector passed it a second time since I gave the inspector photos, I don't know. I'm sure he did not correct most of his work, for the violations that I saw at a glance after the second final sign off are still there and easy to have corrected. I'd bet any amount of money, if a good electrician went back to this house and final results in a law suit would be to take it down to the studs and redo the work.
Sir I really like the fact the you helped the guys showing them the correct way, as a former inspector I would find many unsafe projects and would do the same as you did. They won't ever forget that.....
I have been an electrical contractor for over 40 years and I have seen some bad work(usually DIYers) but never anything this widespread. That was an accident waiting to happen.
Agreed. I do not understand why all the parts are wrong. Doesn't someone stock their truck with at least the most basic electrical parts / screws / etc? Insane and horrifying!
As a cable tech I have run into similar situations, though not as wide spread. I was crawling in an attic one time and came across three 12/2 lines that were spliced together (1 feed + 2 lines) and both the hot and neutral were missing the wire nuts (forget about a j-box). It was a good thing I saw it before as it was right where I was about to place my hand. Another was a duplex I was renting where the builders spliced behind the bathroom outlet to run to the living room and 3rd bedroom. We found this out because one day my wife called and said half the house had no power. I got home and noticed the GFI outlet in the bathroom was blackened. It never tripped, nor did the 20 amp breaker (GFI was rated at 15 amps). In the living room I had a plasma tv, dvr, xbox, and computer. The 3rd bedroom had three computers, two 19" crt monitors, all my chargers for work, a crt tv and another dvr. I calculated over 42 amps was being pulled when everything was running and was like this for almost a year and half. I would have corrected it myself but the house was wired with aluminum wiring and I wasn't going to mess with it. Would have been easy to fix too as the breaker box was on an inside wall in the master closet right next to the bathroom. Yep, 15 years as a cable tech and I have seen quite a bit.
You can't ground from wood? Don't be ridiculous. Almost all wood comes from trees and trees mostly grow out of the ground. It's only common sense that you can use wood as a ground. Though I will admit there are better alternatives. Like a small pile of dirt packed into the junction boxes then just make sure your ground wire is in contact with the dirt. Also a tip for better grounding mix some water in to make it mud. It packs better and as long as you water your receptacles every now and then your good to go.
Food for thought . . . and clever. Did you know that we don't use wooden ladders, but instead use fiberglass ladders because wood can be conductive? Its resistance is too high to trip the circuit breaker or below the fuse though. The idea we strive for is 25 ohms or less for good grounding/bonding. Thanks, for your input for your wording was clever . . .
are you being serious? you honestly think grounding means the grounding wire just has to touch dirt and dumping wet mud into a junction box is a good idea? did you even go to school?
everything in this video reminds me of my house when i bought it. except my house was built in 1880 and the wires were all paper back with cracking rubber. after a few months and 750ft of new wire i finally got it modernized
As a 16 year old going for a career in the medical field with no interest in any of the work this video involves, nor knowledge of said work, this video makes me cringe. I don't know how you could possibly go through with such a job like this and not see your own errors! The guys doing this MUST have known what they are doing! I really hope that these people that did the electrical never go near so much as a wire again.
il IL. In my opinion the General Contractor was unethical. It was all about the money. He used people who were not trained to make more money. On yelp, he has stellar reviews, because he is a con man. He tried double talking me, but it fell on deaf ears. Believe me it was not the fault of the workers.
@@BayAreaElectric I can agree with you, but I have one problem: if he is a con man, the workers must know this, no? If they have no idea what they're doing, then they're only in it for the money. If they do have an idea what they're doing but they're doing work this poor of quality, then they're also just in it for the money. See where I'm going with this?
@@poggairl3782 Of course, I understand your position. I met his workers, and they were eager to learn. I doubt that financially these individuals could afford to be fired. This world is filled with moral dilemmas and decisions that reach for our higher selves. The General Contractor is very well off, and continued his greed. His laborers wanted to pay their rent, and buy food. I worked as a United States Peace Corps Volunteer for 4 years and 3 months in the third world, and had to make many decisions that challenged my ideals. If I were to have the power, I would prosecute the General Contractor and train his laborers. His laborers did carpentry, plumbing, sheet metal, insulation, drywall, electrical etc. etc. And I do understand your position, which we could write volumes.
Once you line up the mistake accidents can happen. For instance, you can have a piece of equipment that become electrified on the surface, and this is bad, but nothing happens until a bare footed person touches a grounded object like a water pipe. Mistakes need to be lined up.
Not sure if the inspectors are overworked, under educated, lazy, or paid off, but lots of things get overlooked these days (hopefully not to this extent). My house had issues that had to be fixed like 2x4 studs further than 30" apart for load bearing walls (in the unfinished basement so it was right out in the open, kinda hard to miss stuff), etc. The house was only 4 years old when I bought it and we had GFCI outlets that the test and reset buttons ejected out of the outlet when tested. The attached deck had to be replaced, and when we disassembled it the number of code violations we found was scary. I'm only glad the home inspector I hired to evaluate the house was really good and pointed out the things that needed to be fixed before we moved in. Given what happened (lawsuits and such) after Hurricane Andrew tore through Florida, you'd have thought that building inspectors and contractors would have been a little more attentive...
SWEET MOTHER OF MERCY, i have no idea why this appeared in my recommendations but sweet FUCK. On a more serious not can't they take them to court or something?, i'm all about second chances, but this... i mean it's one thing to fuck up and put lives at risk, it's an other thing be ignorant/careless and put lives at risk , but all this is just gross negligence on an unfathomable degree, and not only that despite been given several chances to correct mistakes the contracted party has not only failed but also showed clear disregard of their failures.
Seen a lot of work like this done by people who "install electrical work everyday" many times, and the cringe factor is off the scale. As a former inspector who worked in the field for 25 yrs. after going through a apprenticeship that was known to be the toughest in the area (had to pass even 2nd and 3rd stages by a min. of 3 master electricians) none of that would even be allowed by a first yr. apprentice! We had a saying for those homeowners who lived in those homes wired anything like that "oil the hinges" meaning for the doors so they could escape fast when it started on fire. The other day a neighbor asked me if I would look at their outside light, which stopped working on their older home with metal siding, pulled open the fixture, and found the hot wired in, and the neutral smashed into a crease on the siding! They just cut off the ground so they weren't bothered with it, and the box wasn't attacked to a nearby stud, and this was done by a guy "who wires houses" just 3 yrs. earlier! Wish this kind of stuff was the exception, but you eventually realize it's more common than you think. And people wonder why there is so many fires!
niceguy217 - You are correct about many bad installations. I have a thousand photos of poor electrical installations on my website. Most of them were done without inspection. Thanks for your comments.
This makes me glad we have 3 1/2 years apprenticeship with schooling in germany before you're allowed to do electrical work alone. Hoping the Home Owner stays safe
I wish we had rules that a general contractor had to have some training, but here in California a general building contractor can do ALL of the electrical work with NO - I repeat NO training. That is the law in California.
Where I live, you are not allowed to install electrical wires as is in walls. You are required to use either a flexible (or rigid) plastic tube, or a steel tube, and then pull the wires through.
Conduit use to be the code in a couple of the surrounding cities over ten years ago, but no longer. Since romex is so, so easy to install many untrained people are doing it. Building inspectors are the last line of defense for many homeowners, and when they fail to do their job . . . well you can see the result.
I've always done my own electrical work but I also respect electricity. When I bought my first home I bought a book and read it. Every improvement I made was checked and double-checked against that book. The work in this video is unbelievable.
Hey, man! full credit for doing a good job on documenting the issues. just to "criticize" without the photos could be hard to substantiate. Also, your willingness (heck, eagerness) to teach the GC's guys is a credit to you...as is your assessment of the guys (hardworking, respectful, etc). Please visit the nearest cloning station...we need a lot more people like you.... Cheers!
Your surprised it passed? Not me. I recently did a flood damage remodel in San Pedro, Ca. I added new lights, and outlets. When the city inspector came, he was more interested in my dog i had with me rather than inspecting anything. He was in and out in less than 10 minutes. I was actually shocked, he didnt look closely at one outlet and they were all exposed (no drywall) for the inspection. Luckily for the homeowner i take pride in doing my job ... correctly!
The homeowner is protected by people like you who have pride and character, not the inspector. I love dogs too, and would have bonded with the dog before and after doing a complete inspection.
I'm confused by this video. I live in FL and our laws do not allow unlicensed electricians to work on new construction. It's supposed to be done correctly the first time. I'd be suing the GC and the county. The county is responsible for their inspection. Period. If they pass work like this, they should be held accountable. This GC should not be allowed to build a bird house until he has had every single job reinspected and brought back up to current code with zero safety violations present. ZERO!!! In Alachua county, this GC would be in Jail. This is criminal negligence.
DoomGhoul - I did this in one take . . . and now regret it because there is so much good stuff I left out, and I mispronounced several words. Honestly, I was so moved to do this, I let it all out without censure. Thanks for your comment.
I never thought, that I am going to watch such video, but it was quite interesting, thought I am very bad in a electrics. Your voice is perfect for such videos, great job.
Yes, I am surprised that it is getting so many view recently because it is not the most exciting video, but I believe important for anyone having work done on their house or property. Don't rely solely on the inspector to protect you is the bottom line.
This is outrageous. I dare say in all probability since it has happened this once, it has probably happened other times. They should find out who inspected and approved this work then audit their history of approvals.
You would think so! I turned in my photos and comments to the building department, and have subsequently been to the home for other issues. Without permission to investigate, I see some of the same code violations I documented. If I were to told to sleuth, I'm sure that many issues still exist.
Great job. You're saving lives. What a shame that the city is so corrupt that they would sacrifice lives for money. Someone needs to go to prison for this.
Think ? It is clear that this installation is prone to a deadly fire. I'd install at least 4 to 5 fire detector in each room after seeing this, and send the bill to the contractor.
Short story told to me by an electrician while he was checking the new wiring I did to my house: He installed all the wiring in a new house. Everything. By the book. The only thing he did not do was to put the lids on the junction boxes in the walls. (here there is usually a small junction box in every room). This was because he was going to do a final checkup after the walls(brick) were plastered with a cement/lime/sand mix. After a while the owner calls him to complain that the house is "energised". Touching the walls would give you a small electric shock and the power meter was spinning wildly. When he went to check the wiring he found NO junction boxes. The idiots had filled them with plaster. Man, the plaster guys almost got their asses kicked. The whole cost of plastering was refunded and they also had to pay for drilling out the junction boxes.
Thanks for sharing your story from that electrician. I'm not sure why the walls had current unless some of the wiring in the junction boxes was exposed.
The workers were ignorant (we all come into the world knowing nothing), but the general building contractor was greedy, so he hired people who would cost him less.
The plaster is a wet mix. Imagine pouring a watery cement mix in the junction box... From there the electricity traveled through the still wet wall, etc. You are right. The big contractors hire the cheapest workforce available failing to realize that it costs them more to fix after those unskilled workers than to pay for skilled workers from the beginning.
Oh most are aware, that is why they do their damnist to not fix their sub par work. They will send out the most useless guy on the crew to poke and prod for a few hours, then when nothing is fixed, complain that it's not costing him money to do anything more so he won't be coming back out.
I recently did some remodeling in our kitchen and found an outlet mounted directly to knotty pine paneling that was cut out to fit the outlet with no junction box. Even as an electrical novice I was in shock to say the least. After living in the house 15 years it makes me wonder what else is hiding that we never saw.
Reminds me of when I opened up my house like a tin of beans when I first moved in. True story: The electrical socket that powered the cooker hood fan was actually inside the cooker hood, where the steam from the stove runs right in front of it before going back out of the air holes. It was covered in fat from cooking. I still have some issues yet to be resolved, such as when I have my electric blanket on, I feel a tingle when I touch the wall as if I'm making an earth.
STOP! Have an electrician figure out the problem. The fact that you have not been hurt is because your resistance is high. For example, if you were in your bedroom and stepped out on the heat grill, which is probably grounded then your resistance might lower. Remember a bird can land on a live wire, it is when it becomes a resistor in the circuit that there is a problem. Don't help complete the circle back to ground. Thanks for sharing your story about the cooker hood fan.
This is absolutely terrifying. I would be scared to death to sleep in that house. You could easily wake up with a random electrical fire coming from any room!
WOW!!!!! I have never.... As a 15 year IBEW journeyman electrician this gives me the shivers. I have seen a lot of bad work, I have even seen someone wire a bathroom fan/light like the can light except even worse because the sheath was stripped back about a foot, but I have never seen that many insane violation and absolutely straight up fire hazards. I guess I'm glad I've been so sheltered.
If you are not already familiar I suggest you look up the Badger house fire in Stamford Connecticut that occurred on Christmas morning 2012 where three young daughters and the two elderly Grandparents were consumed in a house fire while the mother and the contractor boyfriend were sleeping downstairs A 1920 two-and-a-half story frame house at the end of a cul-de-sac was undergoing complete renovation for quite some time and and with the construction being incomplete they were granted a a temporary Certificate of Occupancy when in the aftermath it was clear to the most untrained eye the house was not in any condition to be occupied with scaffolding still surrounding the house siding unfinished and who knows what else to say the very least Firefighters on the scene battling the flames attested that the fire was out of control as the balloon frame structure with the wall framing extending from the foundation to the roof line contained no fire stops and none were installed during the recent improvements before the framing were covered that they could see as they open the walls to fight the fire I only bring this up because the next morning news reporters from local papers were on the scene taking pictures and one happened to catch a photograph of the back of the rear entryway vestibule, which they later call the mud room and clearly it was a photograph of a sub panel which appeared to have arcing burn marks emanating from it onto the wood siding. The mother and the contractor told the authorities they had enjoyed a Christmas Eve in front of the fireplace and when the fire was out the contractor boyfriend had swept up the ashes so Santa wouldn't get burned, they told the young girls and putting them in a paper bag he placed them them in a covered metal receptacle in the mudroom claiming that this is where the fire must have started. Though in later depositions the contractor claimed the mother had put the ashes in the mudroom and he had taken the blame originally to protect her The contractor disappeared himself for a while, then resurfaced though his records were difficult to attain, The mother, Madonna Badger was found to have deleted all records and photographs of the construction project from her ex husband's computer, though he attested she had permission to access his apartment and his computer The contractor's insurers agreed to settle the lawsuit by paying seven million dollars to the estate of the three little girls. The father of the three girls who lived in Manhattan said publicly to Katie Couric he could not go on living without his three daughters and was determined to bring Justice to those who caused their death and filed suit against the City of Stamford claiming they were responsible [ From The Hartford Courant - Matthew Badger (the father) argued that the city was reckless by giving (the contractor) Borcina , who had no contractor's license, a building permit. He also argued that the city approved plans that didn't include smoke detectors in the girls' third-floor bedrooms, which he said was a statutory requirement. A key issue was the city's decision to demolish the house two days after the fire without telling Madonna Badger. The lawsuit named the city Director of Operations Ernie Orgera and Chief Building Official Robert DeMarco as defendants and alleged that they conspired to illegally demolish the house to spare the city from legal liability. Within a few days the entire house was carted away and destroyed, prohibiting any private investigators or insurance investigators from looking into the cause of the fire. In depositions, the city's two fire marshals acknowledged that the swift demolition of the house and destruction of debris made further investigation impossible ] City officials testified however they all circled the wagons, even one refusing to testify. With neither physical evidence nor testimony to prove liability the court had no choice but to find for the motion to dismiss the case though in it's finding it admonish the city and its employees for its actions. The city did agree to settle the lawsuit for undisclosed amounts to the Estates of the children and the grandparents though public records show that six million dollars was paid to the children's estate with the grandparents estate settlement unknown And sadly true to his word Mr Badger one month after his case was disposed passed away from an unknown cause except stated as natural causes. Heartbreaking. And this past October Michael Borcina, passed away from cancer, his years after the fire were spent working for Habitat for Humanity. I'll leave it up to you as to what the total number of victims were as result of this circumstance. As a footnote then-mayor Dannel Malloy is now the governor of the state of Connecticut So five lives perished in the fire, two more in the years shortly thereafter when malfeasance, negligence and conspiracy surely seem to be at the root of it all and nobody personally went to jail or lost their job or had to pay out of pocket or had wages garnished. They get to continue on with their lives doing their job as city employees the same way with no accountability, to collect their paychecks and later their pensions with one making it all the way to the State House and as all governors do with hopes and aspirations one day moving to higher office. The only consequence we can hope for is that these people have some kind of conscious and for the rest of their days their sleep will be disturbed by the images of three small girls and two elderly trying to escape the flames of a burning building that they could have prevented and the heartbreak of their loved ones. If not then truly these people truly are sociopaths with no empathy and feeling for the pain of others. So sad there are re these that not only walk among us but are in positions of authority vested with Public Safety I'm sorry for blowing up your comment box, but your video was diligent thoughtful sincere accurate responsible and spot-on and it triggered this in me, something I've watched from day one and followed every development and in the end has left me disturbed and unsettled over how this could continue in our society today Seeing what you saw on your video brought back the possibility of this happening over and again to innocent people by negligent people. Thank you and keep on fighting the good fight
Sadness and anger from your accounting strikes me. I loathe incompetency and dereliction of duty. I left two hours ago a city meeting with Jerry Hill our local Senator. I have been trying for almost a year to have a law passed in California, which would make it mandatory for any electrical work to be done by a licensed electrical contractor or a State Certified electrician. In California our State Contractor's License Board allows general contractors to do all of the electrical work without an electrical license or certification, if the general contractor performs two or more unrelated trades to carpentry . . . STUPID! As an electrical contractor (C10) I must used State Certified Electricians, but a general contractor who know far less than myself about electricity can use his laborers or anyone else in his employment . . . STUPID California law. Thanks for your comments. You and I have been cut from the same cloth.
I don't know if you are serious, but the salary for a journey electrician in my area is about $70/hour. There is certainly a shortage of good electrician in the San Francisco Bay Area in California.
I've been an AV installation contractor and data cabler for 10+ years, done a lot of residential work so I've been in a lot of roof spaces, and a fair bit on the commercial side too. Seen my fair share of dodgy work (and come close to accidents due to it, more than once) but I've never seen any electrical job done as poorly as this. I feel sorry (and a fair bit worried) for the homeowners. Great video, keep up the good work upholding codes/standards and pro installation practices.
Dude, it is your DUTY to notify the local department of building safety. This is a life safety issue, and this home MUST be condemned until brought up to code. Remember your liability. And let the homeowner settle this with the general contractor in court. They've got themselves a major lawsuit. Kinda makes me wonder what the plumbing looks like.
I'm actually glad I have 2 uncles who are qualified at most things. Roofing, Plumping, Electricity, and even Gas. One is a maintenance foreman, while the other does air conditioning for major corporate and industrial facilities, ie the big stuff, one of which is now retired. I've helped them a lot over the years with their instruction of course. Even when I was a teenager I could do better wiring than what I saw on this video. They're both home improvement do it your self gurus, and actually get angry when they notice stuff like this. I remember when we help redo my brother's home, roofing, wiring, plumping, even did the gas piping, the roof work. It was pretty bad, but the house was pretty old. One of my uncles was quite mad though that the roof used very thin plywood you couldn't even walk on it, we literally had to replace it all. I can do plumping and wiring, and confidently to boot, but you will not get me to touch gas, nope.... scares me to death. Too many bad Hollywood movies. What really bugs me about this video is, why the general contractor didn't at least provide proper educational materials for his new employees see one of them looked almost right out of school. They sell books on how to do proper wiring, it isn't rocket science.
Kameraden - Thanks for sharing some of your family history. Construction is fun and enjoyable for many of us. We continue to learn our whole lives and share our skills with family and friends. When I see my neighbors doing their own home projects, it is my pleasure to share tools and give them my thoughts. It is difficult for me to see a General Contractor like this one caring only about $$$$$. He doesn't care about his clients nor the men working for him. In fact, his work could seriously injury or kill those who are paying him, or maybe the next owners of the property. Thanks again.
Ya, wiring is serious. Improper installation can lead to a house fire, or accidental electrocution. Neither is a good thing, and that is just the serious problems. Let alone minor problems that will drive a home owner mad, when appliances or lights do not work properly. It's the one thing about buying a renovated home that would scare me. Even if it looks fine on the outside, who knows what it's likely behind the dry wall. Incidents like this do not reinforce people's confidence in the system.
Oh brother this brings back memories. in the 80's the city in which I lived had a Mayor and city council which were heavily in favor of development. Developers started building at a higher rate then had ever been seen previously. In this city were many older homes that had been built on spacious lots. Soon multi unit condos projects with 80-120 units stood where previously 1 or 2 single family homes ad been. The building inspectors, as was discovered after the fact, were doing "drive by inspections". Hundreds of these buildings were constructed with a dangerously few good inspections. I came into this after the court settlement was reached. The list of serious decencies was staggering. Shear walls nailing not to code, hold downs, weak concrete footings, insufficient rebar in the rook of underground parking lots the lists went on and on. Total disaster.
I've done electrical design work for a company out in California before, they wanted us to violate NFPA 30A, 52, and 70E (designs were for fuel dispensing locations) all over to save costs. Also, if I saw this in my house I would be calling a lawyer before calling the third party electrician because that wiring screams future lawsuit. The only way I would feel comfortable with any correction is if it involved tear down the walls and allowing a third party to inspect the work. I don't know a lot about NEC, most of my work is exempt from NEC, but I've read enough to be horrified by that install.
This is the exact reason I don’t have electricians do work in my house, Louisiana has a problem with get-er-dun quote skilled workers. I had the meter relocated from the back to the side of my home where the generac auto transfer switch was also installed and that’s where the electricians work STOPPED!!! Everything else is being done by myself using the NEC 2020 code book as reference a has thus far been inspected by both city & parish “county” as well as 2 master electricians that I know and have seen their spectacular work methods. As far as I can research, Louisiana is still using the 2014 NEC Code. YES, I’m installing new ground bonded junction boxes in my attic above each room due to my home being built in 1946 “76yrs old”! All the old BX 2-wire armored cable is being removed, all the 2-wire non-ground old school Romex cables are being removed and all light fixtures, and/or old insufficient junction boxes are being replaced. Dedicated circuits are being run as per 2020 NEC code, GFCI circuits are being run and each room has its own home run. Although, unnecessary or redundant it’s safer and easier to troubleshoot a problem that may happen over the years . The extra wire is costing me but each receptacle unless access is achievable without damaging the walls are being run individually up into the attic to a junction box(s). If more wires are needed and that junction box has come to its box fill limit another junction box will be installed, however I’m attempting to only have one junction box above each room. All junction boxes are bonded using pre-made green 12 awg pigtails with green ground screws, this is also how all fixtures are being grounded and metal light switch/receptacle boxes as well. I’m trying not to use plastic boxes or plastic fixture boxes so a box/fixture grounding method can be achieved. Plastic is the way much is done nowadays and I hate that fact metal boxes are better but, I do have 3 plastic junction boxes used simply for joining my security lights so one switch can be used. Metal boxes cost more and can save your life if a ground is installed & bonded which is how each junction box is being done above each room. That way if a short happens by mistake or future failure it will cause the breaker for that circuit to trip and save the people in that room, loved ones, the home and property from harm or worse. Using one home run per room and a junction box per room may be excessive but, it in fact will make troubleshooting a failure or mistake later easier if they should happen! More people should get educated and do their own work and of course do their due diligence when finding a pro or inspector to check their work!!!
That's interesting you say that. For instance, I live in Toronto in Canada and many friends of mine are also electricians that get called to do work in Louisiana. Wasn't really sure why, guess it makes sense now. Not surprised they're clearly Outsourcing all the way from Canada for work to be done
@@BayAreaElectric armored cable is fine if it has a ground wire in it as well, the BX armored cable I’m referring to is the old 40’s-50’s style cable. The 2 wire kind that had the cloth braided rubber insulation and the metal armor was used as the ground and secured with a armored clamp at each metal box for the ground. Only a couple receptacles in the house were 3-prong grounded and the rest were 2-prong. Hell even the 240v window a/c was not grounded for safety either. There was also a old 60’s version of cloth braided NM cable used as well. It also was only 2 wire and there’s was some black sheathed NM wire that had a very skinny ground. I guess that black NM cable was the first rendition of what we call romex today. Some of this is still in the house being used only because it’s got a ground in it. At least until I open up the walls and redo each room as I go!
@@jessegamingtv2146 yes this is true electricians and linemen both come to Louisiana to do repair work. It’s primarily after large hurricanes destroy the grid and homes and need to be redone or repaired!
City inspectors aren't electricians...I would had insisted that a licensed journeyman or master electrician had looked over everything before the city even came in. I would be surprised if they even bothered to look up into the ceiling.
An electrician should have done the work. California has a loophole in the law that allows a general contractor to do the work without any training or certification.
I know just enough to get myself in trouble; I've installed light fixtures and run lines for outlets and such a few times over the past couple of decades. That said, how on Earth anyone thought much of this was acceptable is beyond me. Heck, 10 minutes spent googling how to install a light or outlet would have covered most of it. Scary stuff.
No idea why youtube recommended this video to me, but it was interesting. Sadly this happens a lot in southamerican countries, not as awful, but it's almost there. I've been saying to my family to call specialized people to renew all that awful electric connection on the house, but they refuse, saying it's "expensive" and how some members of the family can do the job.
Inside wireman apprentice here, sent this to my instructor at my JATC, expecting to elicit a good chuckle... but he wept. Thanks for posting this though, I'd call it job security for myself if it wasn't somebody's home that could unexpectedly burn down.
shalol When building a house, you have to get it inspected. which makes sure it's safe and up to the current electrical code. Most of this is terribly unsafe and some of it is just ugly.
holy hell. This makes me feel way more confident in my DIY jobs. I actually follow the rules and think everything through logically. This video makes me sad for those homeowners and the workers too.
I've always thought if the general contractor did the work and THEN have an electrician check the work to verify the work was done correctly THEN have a building inspector check it - that should be good enough
If it demonstrates anything for you it is - take photos of any work a contractor does for you. Don't depend on a city inspector to protect you. Thanks for the comment.
Electrician here (Massachusetts) I have seen some crap like this too in attics. I have noticed that this garbage ALWAYS, and I mean ALWAYS, happens in the more expensive homes. I could never understand why. I never knew six 12-2 romex cables can fit inside a 4 inch by 1- 1/2 inch box, each with their own metal connector. Still that recessed can of yours beats mine. I had a happy home-owner simply remove the side of the built-in j-box to make the splices. Did this to ALL of them. As far as old work recessed cans are concerned, those damn things need to be banned. *Cough* I'm guilty of using drywall screws in a blue moon. But only if nothing else worked. *cough cough*
You and I are the same . . . and have seen the same. That recess light entry was my first time and i"ll bet the last. That was one in a billion. Who would ever think to come into the notches?
This was horrifying to watch... that "contractor" needs to not only have his license permanently revoked but forced to refund and pay for all corrected work.
I'd personally call the guys over and punch them in the face.. personally. This can burn a house down and kill a family potentially. There is a reason there are regulations and a reason why ALL electrical work done has to be inspected before it is deemed a livable area.
Eric Benton your anger should be directed at the general building contractor not his men for they did not know any better. Believe me I understand your emotions, thanks for expressing them!
This video keeps showing up in my recommendations for whatever reason, and every time I remember your plight. Keep doing the good work you do by not taking the cheep and/or easy way out.
I am a computer scientist. My electrical skills are only really applicable to low voltage and current DC. Even with my limited knowledge I was cringing at the lack of common sense. Like what the hell were these people thinking. Why would you ground a fixture to wood!
BayAreaElectric LMAO. Wood grows in ground! The worst electric fail I've ever seen was non gfci sockets in a bathroom but this honestly takes the cake.
My experience with electrical wiring/routing stops at 36v DC, however even I could tell the way that those fixtures and boxes were wired is ASKING for short circuits, arcing, and, consequently, fires. I'm glad someone was there to fix the problem before it became worse - those electricians were just hacking together 120v AC lines!
Unfortunately, inspectors can be pressed for time and tend to take the word of contractors they know, so it is easy for contractors to take shortcuts. I am a homeowner who does all his own work. I have always been very cooperative with inspectors and one day one offered to approve an electrical installation over the phone because he "knew my work". (I was an industrial electrician for 30 years.) I told him I wasn't comfortable with that and asked that he inspect my work in person. I have been retired for many years and sure enough, he found a violation that was due to the codes having changed since I retired. I fixed it right away and the job was signed off. I know contractors who hire inexperienced "wire pullers" who should be under the supervision of a master electrician, then turn them loose by themselves.
You obviously have had experience. I think the inspector probably didn't look at the job like you mentioned, but believed the contractor. I don't know why he signed it off a second time. Thanks for sharing your experience.
When I go for my electrical apprenticeship I'll keep this channel subscribed; codes may vary from country to country, but skill, talent and doing the job right is pretty universal.
I am almost a complete ignoramus when it comes to even the basics of electrical wiring, but even I could figure out that there was something seriously wrong with those pictures. If that was my home, I would be contacting attorneys with all due speed.
Not sure why this came up for me, but I'm a bit of a "handyman" and my father is a retired electrician, who worked for GE and for the USAF, and my grandfather was a USAAF electrician as well. I shared this with my dad and I think he is mad enough to want to come out of retirement. There are hundreds of "McMansions" being built around him, and he works at the local hardware shop now..and tells me horror stories of what some of the generals come in to buy for jobs he knows they have no education to complete. Keep up the good work +BayAreaElectric! Keep the people safe!
Thanks . . . and tell your dad to come out of retirement we need people who get pissed off at bad workmanship. I'm a U.S. Army Vet who was trained in cryptography, and I never liked the saying, "its good enough for government work." Your dad will know what I'm saying.
To be fair, electricity "could" be grounded to wood. You'd just have to keep that wood fully saturated with water and somewhere have a connection to earth ground. Easy-peasy, house on fire-y!
Fun story from when my dad had some electrical problems... He noticed that the main fuses in his house started blowing out one after anther. So he starts disconnecting different parts of the house only to find that if he disconnected the electricity to his barn, the main fuses would hold. He then starts going over the electrical systems in the barn and couldn't find anything wrong with them, so he concludes that the problem has to be in the line between the house and the barn. He hires a digger to come and dig the cable outta the ground, and lo and behold! The asshat that owned the property before him had run short on cable when he first put the line down, so he spliced it together with another cable midway through, only he "insulated" it by wrapping the wires in fist-sized balls of electrical tape instead of using proper insulation. He then buried the cable straight down in the dirt, no protective tubing or anything. Fucking genius. It kinda makes me surprised that not more houses burn down due to electrical fires with all these clowns running around doing electrical work.
Karl The Fragr - I ran into a case about 5 years ago where a guy was growing a lot marijuana in his house, but the electrical bill was small. Often times people were caught because the electrical bill was very, very high. He had dug down to the utility company's cable before it got to the house (in front of the meter) and double tapped in. So there was no metering of the electrical . . . I think his penalty was greater for stealing electricity than for growing pot.