Тёмный

This Repair Is AMAZING | We Show You The Full Process | By Dent-Remover 

Dent-Remover
Подписаться 58 тыс.
Просмотров 81 тыс.
50% 1

"My METHOD On How To Repair This Dent Without Needing To Repaint"
By Dent Remover ltd in Beverley
www.dent-remover.co.uk
East Riding Of Yorkshire
Join this channel to get access to perks:
/ @dentremover01
Mercedes C200 Aluminium Bonnet
Hi Thanks for checking out my latest repair video. This damage was very difficult to repair and I wanted to show YOU all the main stages of the repair process so you can see it’s not a simple push out job.
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
We use TubeBuddy to make our videos more efficient... want to know more and subscribe to this great bolt on service?
www.tubebuddy.com/dentremover01
For more information
www.dent-remover.co.uk
See you soon!
Martin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Music Soundtrack By
Epidemic sounds,
Tommy Ljungberg, White Gold
#PDR #DentRemoverBeverley #PaintlessDentRemoval #EastSide#DentRepair #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler

Авто/Мото

Опубликовано:

 

14 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 245   
@prebaned
@prebaned 5 месяцев назад
It's not the tools, its the man behind them that makes the magic.
@dentremover01
@dentremover01 5 месяцев назад
Thank you so much for your kind words
@dangerclose5400
@dangerclose5400 2 года назад
I gained IQ just by watching this video. Again, superb technical repair! The explanation of aluminium vs metal repair is spot on and the way you explain it is perfect. Great job good sir.
@dentremover01
@dentremover01 2 года назад
Wow thanks! Your really liking my videos it’s a pleasure to read your nice feedback I try my best with all the videos I make to show as much as possible. I hope you can take something away from the vids Thanks Martin
@1st_track_dents
@1st_track_dents 4 года назад
Amazing Job Martin, those types of jobs I think are always a gamble as you just never know how the Aluminium is going to react. Having years of experience and lots of skill help on these jobs and you have plenty of both, well done, super clean repair, customer must have been over the moon! 🌜🌜🌜
@dentremover01
@dentremover01 4 года назад
Hi Jake thanks! Yea I get a lot of jobs where it’s a “see how it goes” I knew it was going to be tough but to be fair it went very well..... just took a lot to flatten it out 😂 Managed to get it sub 30mins too 😂👍🏻 Thanks for commenting and watching Jake... Martin
@marekkalinowski6370
@marekkalinowski6370 4 года назад
Best, I’m mean the best detailed pdr video I have ever watched! Well done for showing every stage of repair on this difficult part of aluminium panel. No drilling, no fake after repair shots, all done with proper way of PDR. Martin you’re doing fantastic work showing the public all secrets of paintless dent repair, and also very nice to see how Your RU-vid channel is growing! My hat is off for you 👌
@dentremover01
@dentremover01 4 года назад
Hi Marek thanks!! I tried my best to show all the main areas of the repair and explain the best I could! Was hard work! If you look closely you’ll see my watch flick up the time throughout the vid! Take care and see you in near future hopefully at a meet/show Thanks Martin
@BilalBilal-gy6dg
@BilalBilal-gy6dg 3 года назад
I spent long time watching PDR techs on youtube, and by far you are the best among them. Great work, great explanation, great filming, and great personality. Love you man and thanks for teaching us ❤️
@dentremover01
@dentremover01 3 года назад
Hi Bilal thank you so much I really appreciate your feedback. My aim is to show anyone what I’m repairing without all the whistles and bangs, il continue to add as much content and value to my future videos and very happy I can help you and others Take care, Martin
@Ray50d
@Ray50d 4 года назад
Well deserved thumbs up. Always a joy to watch you repairing these nasty dents and making people happy. 👍🏻
@dentremover01
@dentremover01 4 года назад
Thank you Ray50d my pleasure
@ArchieversKingdom
@ArchieversKingdom 2 года назад
Brilliant work Martin , well done 👍👍
@franciscoramos226
@franciscoramos226 4 года назад
A BIG Thumb for you, Martin. An outstanding repair on aluminium bodyline and a great explanation about it. Well done!! 👏👏👍💯
@dentremover01
@dentremover01 4 года назад
Thank you Francisco really appreciate your feedback. Very happy you enjoyed the repair vid 😊
@ozakarisozacra6499
@ozakarisozacra6499 3 года назад
GREAT VIDEO...LOTS OF SKILLS AT PLAY ALONG WITH GENEROSITY SHARING HIS KNOWLEDGE....ALL BEST MATE..!!!
@alasag877
@alasag877 2 года назад
You are the best learned a lot watching you work.
@superkev2000
@superkev2000 Год назад
Another excellent repair and great video too! Very nice job on both Martin! You are highly skilled! People have no idea how tough these repairs can be to make look this nice. Take care!
@dentremover01
@dentremover01 Год назад
Thanks Kevin. This dent was quite tough but I was amazed with the end result. I really appreciate your feedback on it. Are you going to the MTE in January?
@superkev2000
@superkev2000 Год назад
@@dentremover01 I'm not sure about MTE yet but that sure would be a lot of fun!
@dentremover01
@dentremover01 Год назад
Ah ok. Hopefully things change and you can go 😊
@mikeclifton7778
@mikeclifton7778 3 года назад
Absolutely superb results and all fully explained, the lined card gives an excellent view of the recovery process, now a subscriber.
@dingking7577
@dingking7577 2 года назад
Great job bud! Yeah they felt that for a few days. Love the Dent Cam.
@dentremover01
@dentremover01 Год назад
Haha I bet
@johnintelisano887
@johnintelisano887 4 года назад
Beautiful repair Martin! Any one that has never worked aluminum could not begin to understand how difficult that repair was and you glassed it ! 👍👊
@dentremover01
@dentremover01 4 года назад
Hi John thanks for watching and commenting..... yes it’s a lot harder to work on than steel for sure! Just need time and patience and it will be sorted!! Take care Martin
@adamhoneybun1166
@adamhoneybun1166 3 года назад
Martin absolute perfection thanks for your videos been a pdr tech for 15 years still learning so much.
@dentremover01
@dentremover01 3 года назад
Hi Adam thank you! Great to hear from other techs and I hope your busy, safe and well Thanks martin
@dents-b-gonedarwinnt8355
@dents-b-gonedarwinnt8355 4 года назад
Another high quality repair mate. Great work...look forward to the next one😉👍
@dentremover01
@dentremover01 4 года назад
Thanks Adam very happy you enjoyed it 👍🏻
@julianfisher6373
@julianfisher6373 4 года назад
Great work Martin really shows your skill & perfection with aluminium, enjoyed the video & keep them coming !
@dentremover01
@dentremover01 4 года назад
Thank you Julian really appreciate your comment and for taking the time to watch the video
@steveguest8028
@steveguest8028 2 года назад
This is fascinating to watch Martin
@zeuszerzura8542
@zeuszerzura8542 2 года назад
impressive !! You are a real artist!!
@dentremover01
@dentremover01 2 года назад
Thank you Zeus merry Christmas
@davidholzbaugh652
@davidholzbaugh652 3 года назад
Great repair. Great job!
@davedefehr7477
@davedefehr7477 Год назад
Very impressive work. Well done!
@dentremover01
@dentremover01 Год назад
Thank you Dave 🙌🏼
@sajidmahmood3668
@sajidmahmood3668 3 года назад
Wonderful job
@terrysmith6562
@terrysmith6562 Год назад
Hi Martin. Hot glue a large washer over the access hole and remove with alcohol after the repair. Fantastic video as usual thanks.
@emmettcoen
@emmettcoen 4 года назад
Genuinely.. Your material is really really good.. Excellent upload.. Seriously good breakdown.. Really nice and refreshing.. No loud music.. Fancy graphics and bull... Just a genuine tradesman 👍 much respect from Galway 👌
@dentremover01
@dentremover01 4 года назад
Thank you Emy Bear really appreciate your comment. I don’t like putting music on my vids as it’s difficult to find decent tracks and also in the past I haven’t been very vocal so needed to bulk the vid out. I take all comments on board and hopefully my next repair you’ll also like Thanks Martin
@fedakgabor5787
@fedakgabor5787 4 года назад
Gratulálok! Nagyon szép munka! Üdvözlettel Magyarországról!
@dentremover01
@dentremover01 4 года назад
Hi Fedák Gábor Děkuji moc, jsem velmi rád, že se vám to líbilo
@billramsey800
@billramsey800 4 года назад
Hi Martin what can I say absolutely amazing thank you sir. 🇬🇧
@dentremover01
@dentremover01 4 года назад
Hey Bill thank you very much! I try my best! Hope your well?
@Kylesweeting
@Kylesweeting 3 года назад
Holy cow that came out PERFECT. Even with two full days i don’t think i could have gotten it THAT clean. Absolutely no distortion! You set the bar INCREDIBLY high lol
@dentremover01
@dentremover01 3 года назад
Thank you Kyle I really appreciate your comment and yes it was a tough one to do! Thanks Martin
@johnnymastor
@johnnymastor 3 года назад
Great job full of details.
@dentremover01
@dentremover01 3 года назад
Thank you John Merry Christmas
@GreyscaleCharles
@GreyscaleCharles 4 года назад
Nice job, thanks for fixing my brothers car. 🤘
@bigfoottoo2841
@bigfoottoo2841 Год назад
Awesome job, good work..
@tridentpdrltd1506
@tridentpdrltd1506 4 года назад
As always, smashing it out the park on skill & content. 🙌
@dentremover01
@dentremover01 4 года назад
Thanks Ben @TriDENT PDR 🇬🇧
@salahelahmar6151
@salahelahmar6151 3 года назад
Awesome repair
@rimfixer
@rimfixer 4 года назад
Outstanding work Martin saving this one to my pdr play list its that good .
@dentremover01
@dentremover01 4 года назад
That’s great ha thanks!! Very happy I could entertain! Take care Martin
@fabioalvarez6139
@fabioalvarez6139 2 года назад
De lo mejor que hay en el mercado! Aprendo mucho de usted para trabajarlo aquí en 🇨🇷 Le felicito
@jamesyday72
@jamesyday72 3 года назад
Very nice and informative repair
@vgotishan3234
@vgotishan3234 2 года назад
Great job!
@paulwoods5195
@paulwoods5195 3 года назад
Amazing work matewell done💪🏼💪🏼👍🏻
@stephencroft6481
@stephencroft6481 3 года назад
Great craftsmanship
@dentremover01
@dentremover01 3 года назад
Thanks Stephen
@billgwilliam1263
@billgwilliam1263 2 года назад
Watched a few videos by this man recently and found them to be very informative. I was amazed some years ago by a successful PDR repair on my car & intrigued ever since. Recently after the misfortune to have a minor door ding on the panel crease I attempted this myself by the push method he demonstrates & achieved a most successful result. Thank you for the well presented information on technique.👍
@jonskjefte7870
@jonskjefte7870 3 года назад
Amazing job...fascinating to watch. Jon from Minneapolis, MN
@dentremover01
@dentremover01 3 года назад
Thank you Jon! Really pleased you enjoyed the video repair
@gergemall
@gergemall 2 года назад
Thank you. Love your channel.
@dentremover01
@dentremover01 2 года назад
Thank you JON
@victorbarranca2910
@victorbarranca2910 4 года назад
Outstanding job, thanks for sharing,
@dentremover01
@dentremover01 4 года назад
No problem at all thanks for watching
@aristidescastillo8089
@aristidescastillo8089 3 года назад
Wonderful repair excellent detailed job
@dentremover01
@dentremover01 3 года назад
Thank you Aristides
@timwest9300
@timwest9300 2 года назад
Great job I love it
@bobthesnobscotland2821
@bobthesnobscotland2821 4 года назад
great work and thanks for the good detail much appreciated cheers
@dentremover01
@dentremover01 4 года назад
Thank you very much Bob 👍🏻
@dannylee9138
@dannylee9138 11 месяцев назад
Learn more on each video great talent and work keep them coming
@dentremover01
@dentremover01 11 месяцев назад
Thank you Danny 🙌🏼
@harunozdogan8023
@harunozdogan8023 2 года назад
great work thanks
@paulinmazurek2769
@paulinmazurek2769 3 года назад
Fantastic job never seen it done before you must be in great demand.
@andysdentrepairs5148
@andysdentrepairs5148 4 года назад
Great video mate and perfect repair as always 👌
@dentremover01
@dentremover01 4 года назад
Thank you very much Andy !
@kamilkobel1051
@kamilkobel1051 4 года назад
Outstanding job!
@dentremover01
@dentremover01 4 года назад
Thank you Kobel 👍🏻
@wmccourtney2814
@wmccourtney2814 Год назад
Great work!
@dentremover01
@dentremover01 Год назад
Thank you 🙏
@dent-clublondon
@dent-clublondon 3 года назад
Great video 🙋
@eltongoddard4710
@eltongoddard4710 4 года назад
Stunning repair 👍
@dentremover01
@dentremover01 4 года назад
Thanks Elton
@jasabasenara8124
@jasabasenara8124 2 года назад
Awesome work. Very professional. 👍 I think yourself and Jake should do a big repair together. That would make a great video.
@dentremover01
@dentremover01 2 года назад
Thanks again Jasaba I will ask Jake and see what he says! Although he’s about 4 hours from me!
@jasabasenara8124
@jasabasenara8124 2 года назад
@@dentremover01 oh is he. Might be difficult that one lol.
@delare4
@delare4 3 года назад
great job i learned something, be patient, and patient, and patient take your time, thanks for the video
@dentremover01
@dentremover01 3 года назад
Wonderful thank you Delmar I’m glad you enjoyed it
@MrGarywells
@MrGarywells 4 года назад
Thanku 4 this upload...i hope it helps your business as much as it helps me!!
@dentremover01
@dentremover01 4 года назад
Hi Gary my pleasure thanks for your kind words
@shakeelshaft6714
@shakeelshaft6714 4 года назад
Very nice work and impressive job.
@dentremover01
@dentremover01 4 года назад
Hi Shakeel thank you for your comment and for watching 👍🏻
@Thenoobity1
@Thenoobity1 4 года назад
Another mint video Martin 😁 amazing how you are able to read the metal and anticipate how it will react!
@dentremover01
@dentremover01 4 года назад
Hi Lee thanks for watching, yes it takes a lot of experience and a bit of luck (I think) to repair some of these dents I fix.... this one came out great that’s why I’m proud to show people it! Take care, Martin
@Thenoobity1
@Thenoobity1 4 года назад
Dent-Remover 100%! Same to you Martin 😀
@greetingsbox4229
@greetingsbox4229 4 года назад
Smoothing out the dents and the stubble nice work.
@dentremover01
@dentremover01 4 года назад
Thanks Daniel 👍🏻😊
@ferpa771
@ferpa771 4 года назад
it was top, congratulations 🙂👏👏
@dentremover01
@dentremover01 4 года назад
Thank you Fernando 👍🏻
@gastonmarcelo3648
@gastonmarcelo3648 3 года назад
Muy buen trabajo 👍!
@dentremover01
@dentremover01 3 года назад
Thanks Gaston!
@mrgrumpy5116
@mrgrumpy5116 3 года назад
nice job, not an easy one to get rid of, thank you for the video,
@dentremover01
@dentremover01 3 года назад
Hi Mr Grumpy, thank you very much for your comment and very happy you enjoyed it. Yes it was a bad one to do but it came out great I suprised myself! Take care, Martin
@nikpatel16
@nikpatel16 4 года назад
Excellent clean repair!
@dentremover01
@dentremover01 4 года назад
Thanks Nik!
@Hammondt88
@Hammondt88 4 года назад
Thanks for taking the time and effort making these video's, the finished repair was incredible. P.s thanks for the glue and tabs :)
@dentremover01
@dentremover01 4 года назад
Hi Tom thanks!! My pleasure are you finding the stuff good to use? Thanks Martin
@Hammondt88
@Hammondt88 4 года назад
@@dentremover01 great to use buddy :)
@geoffcole3533
@geoffcole3533 4 года назад
Well delivered video , like the way you explain your procedures. Real tester for any tech.
@dentremover01
@dentremover01 4 года назад
Hi Geoff thank you for watching and commenting. Yes it was a really tough dent to repair but worth showing the process so people can see that they don’t “just” pop out Thanks Martin
@geoffcole3533
@geoffcole3533 4 года назад
@@dentremover01 Martin do you put actual time of repair also a cost to the client , that sort of damage app $700 in Aus
@dentremover01
@dentremover01 4 года назад
Hi Geoff good question, throughout the repair video you can see my watch ping up the time. I think I started at 9:30 and finished at 2ish... price ranges can vary for these kinds of repairs. You can only earn if the customer is willing to pay for the job too
@paorarokino
@paorarokino 3 года назад
You Are very skilled really enjoyed the vid
@dentremover01
@dentremover01 3 года назад
Thank you Paul really appreciate your comment and for watching
@engineer17151
@engineer17151 3 года назад
Awesome panel repair skills ... make it look easy but I'd bet my shirt it's definately not, unless of course you're properly trained. Brilliant
@raymonddignon399
@raymonddignon399 3 года назад
great job!!!!!
@dentremover01
@dentremover01 3 года назад
Thanks Raymond
@massimo6770
@massimo6770 3 года назад
You are absolutely amazing! You also took into account the orange peel. An artist!
@dentremover01
@dentremover01 3 года назад
Thanks for your comment, yes the paint texture is very important and using a fog board is usually better to maintain the texture, but with time and patience you can achieve amazing results with a line board More vids coming soon and I’m my next repair videos I make il look at explaining texture a bit more Thanks Martin
@massimo6770
@massimo6770 3 года назад
@@dentremover01 thanks. Wait for the next vids!
@dentremover01
@dentremover01 3 года назад
My next video does infact mention the orange peel so I hop you enjoy the vid
@osamaalmustafa3405
@osamaalmustafa3405 4 года назад
Great job buddy 👌💪
@dentremover01
@dentremover01 4 года назад
Thank you Osama 😊
@tonythomas2094
@tonythomas2094 3 года назад
Respect.
@andrewboggis3174
@andrewboggis3174 4 года назад
Nice repair Martin that looked a tight little bugger.. nice quality Repair..
@dentremover01
@dentremover01 4 года назад
Hi Andrew thank you, very happy you enjoyed the video 😊👍🏻
@mvasquez6667
@mvasquez6667 2 года назад
Nice job.
@dentremover01
@dentremover01 2 года назад
Thank you 🙏
@brianakers9606
@brianakers9606 3 года назад
Excellent work, Man. Very impressive. Loved the final result but I couldn't help but be bothered by the poor condition of the paint. Hopefully the car owner kept their appointment with you and had the car detailed. I'm sure that was a tedious job.
@hajarali9330
@hajarali9330 3 года назад
Thank you so much ❤️
@enderbalkan
@enderbalkan 4 года назад
Amazing 🙏
@dentremover01
@dentremover01 4 года назад
Thanks Ender 👍🏻😊
@guilhermeferreira1392
@guilhermeferreira1392 4 года назад
Guilherme de São Paulo Brasil acompanho todos os seus vídeos meus parabéns
@calogerotravail6749
@calogerotravail6749 4 года назад
thank you very much, respect
@dentremover01
@dentremover01 4 года назад
Thank you I really appreciate your comment
@evojay76
@evojay76 4 года назад
Great job mate
@dentremover01
@dentremover01 4 года назад
Thanks Jay 😊👍🏻
@josejose2678
@josejose2678 3 года назад
Good job thx ...
@dentremover01
@dentremover01 3 года назад
Thank you too!
@jpanyk
@jpanyk 4 года назад
Nice video
@dentremover01
@dentremover01 4 года назад
Thanks Jpanyk 😊
@davedowner3802
@davedowner3802 3 года назад
Hello Martin,I just spent some time watching 2 of your repairs useing the PDR Method.Both Repairs were very well done.Its Truly an Art.Its all about the Ability to Read the Metal or Aluminum Panel and to Reverse the Damadges by studying how the damage affected the panel, looking to see if the workhardened areas like body lines were affected,and allways work from the good to the bad.Followed as you Started by reversing the Lowest damadge or dents by use of your plastic pull tabs and glue and then reversing the smaller damadge and then getting the pull tabs and straight ingredients the body lines followed by massaging the eyebrows (high areas back down) Proceeding to finalizing the smallest dimples and dings and then to machine buffing the clearcoat which also creates small amount of heat to and kinda blends out the finish to what I would consider an Exelcent Suburb Repair.Great Job Martin.I had 35 years experience in Automotive Body Repair and after 17 yr became Collision Center Owner,Operator and I enjoyed my career so much that I worked 16 hr day,6 and 7 days a week until becoming disabled and unable to work.
@dentremover01
@dentremover01 3 года назад
Hi Dave. Thanks for watching my videos and commenting. Yes that’s pretty much it. Just very controlled pushes and seeing how the panel reacts, basically trying to level up the panel without making push marks so by using certain tips and glue systems amazing results can be achieved. I started as a panel beater, then learnt pdr. It is tough on the body sometimes- like today my hands where killing! I hope you find my other videos to keep you entertained, and take care of yourself Kind regards Martin
@dingking7577
@dingking7577 Год назад
I’m loving “the reason I’m not taking the hood off is because I can repair it with the hood on”. Perfect reason. Sorry bonnet not hood, Americans, right! 😂👍
@dentremover01
@dentremover01 Год назад
Yea exactly! Lazy with style! Just landed in key West and wow what a drive
@dingking7577
@dingking7577 Год назад
@@dentremover01 Hey Martin, what did U think of the Keys? Oh yeah the drive can get a little monotonous especially across Alligator Alley. We use to go down to Marathon Key to go lobstering every summer, nothing like diving all day, showering then grilling fresh lobsters for dinner. Jaime says hello and she hoped y’all had a great great time.
@dentremover01
@dentremover01 Год назад
@@dingking7577 it was great! Yes the drive is a killer though especially keeping to the speed limit and all those cop cars at every junction! Will definitely go to the keys again and stay longer. We saw all the fisherman on the way so must be a popular spot We’re going back soon! Hi Jamie 👋🏻
@EugenMutabor
@EugenMutabor 3 года назад
Really Nece Repair
@dentremover01
@dentremover01 3 года назад
Thank you Zybin
@user-gw5tr5nb5o
@user-gw5tr5nb5o 4 года назад
good job 👍
@dentremover01
@dentremover01 4 года назад
Thank you 👍🏻😊
@ianbaker3819
@ianbaker3819 3 года назад
Absolutely fantastic video, you are amazing the best pdr instructional video I have watched. Do you offer courses if so I would book for sure
@andyrazzell1080
@andyrazzell1080 4 года назад
1st class 👌
@dentremover01
@dentremover01 4 года назад
Thanks Andy!
@dentremover01
@dentremover01 4 года назад
Hi Everyone, Im proud to show you my next repair video… If your a new Technician or interested in how PDR works then you need to watch this! If your a potential customer wanting to see how I operate then you need to watch this video! I really hope you enjoy this 30 minute how to! Thank You Martin
@bother1844
@bother1844 3 года назад
Wow, amazing, as a body man I must say this is excellent work. Thank you for your sharing and awesome tips. Greetings from USA Cleveland.
@dentremover01
@dentremover01 3 года назад
Hi Raymond thanks! You’ll be able to relate to it then..... super hard with it being Aluminium, I’m glad you enjoyed it...... actually had a BMW in yesterday with a similar dent but the price was high and I advised a repair and paint just to be safe Take care and stay safe Martin
@bother1844
@bother1844 3 года назад
@@dentremover01 Thanks and you be safe as well. Just curious, how long did it take you to do this awesome repair?
@dentremover01
@dentremover01 3 года назад
Thanks, I’d say the majority of a day... with the filming Aswell. I could probably have done it in 4 hours or so?
@bother1844
@bother1844 3 года назад
@@dentremover01 I tip my hat to you mate. It would take me a day's work prepping for paint and $$$ in materials plus drying sanding and polishing time. Not to mention a color match blending. I understand perfectly the method you are teaching being I have 44 years of experience working with metal nevertheless the biggest problem I have is choosing what tools to use for certain PDR jobs. I spent ten grand at ding king institute to learn this method of dent repair two weeks training. Honestly what I got out of it was the theory. They rent cars that are easy to access for dent repairs for the students to practice on. They knock dents in them and have the students fix them after one week of theory. I left very unhappily with the hope that with what I learned I would build on it and practice. I am getting pretty good at it but honestly, your videos would have saved me a lot of money. If I had the funds I would train all over again but with someone like you that shares honest teaching knowledge. I find glue pulling amazing, and I am getting pretty good at it.
@dentremover01
@dentremover01 3 года назад
Hi Raymond thanks for your message. I’ve heard a few stories about Ding Kings training. I haven’t looked into the training side of things but I try to explain the repair procedure on my vids so that beginner or advanced techs can watch and maybe take away a tip, skill etc or make the mind think and ultimately help others out. I don’t know everything but my methods may be different to other techs. Keep at it. Learn your way and tweek your repair method. As long as you can get the dent out your doing it right 🙌🏼🔥
@user-lj9bu4oc4c
@user-lj9bu4oc4c 3 года назад
Супер!!!!! 👍👍👍
@vickycarprofessional7680
@vickycarprofessional7680 3 года назад
Hii sir I am dainter painter in India 15 years experience
@dentremover01
@dentremover01 3 года назад
Hi Vickybamrah thanks for your comment, well done 15 years you must enjoy it? Thanks Martin
3 года назад
Nice job 👍 yesireebob
@Normalhowaboutyou
@Normalhowaboutyou 3 года назад
Thx
@dentremover01
@dentremover01 3 года назад
No problem Geoff
@ArtDaBarber619
@ArtDaBarber619 3 года назад
Amazing job Martin. Thank you for the tool break down. I will be making purchases soon. What is the cost for a repair like this?
@INAGODAVIDA
@INAGODAVIDA 3 года назад
Thank you very much for sharing your expertise. My question is, when using the Heat Gun, at what temperature is good to be able to make the Aluminium pliable to work with ? And should it be maintained at that temperature also ?
@gjebox
@gjebox 2 года назад
Well done video... the question when your using the pushing tool in the video how do protect the hole from paint damage or bending the hole as you creating levage at the hole opening
@chrisstevens9376
@chrisstevens9376 4 года назад
Great repair that Mart even the Skywalker family combined couldn’t have used the force to do a better job 😂👍
@dentremover01
@dentremover01 4 года назад
I had to turn to the darkside for that one
@bruffy69kb
@bruffy69kb 3 года назад
Amazing repair, can't believe you managed that especially being aluminium?? Stunning result 👌, can I ask what you are using too release glue is it acetone based?
@pinplume
@pinplume Год назад
Très propre !! Bravo monsieur ! Combien de temps avez-vous passé dans cette bosse ? Amicalement
@deanmacheenify
@deanmacheenify 3 года назад
Amazing finished product sir. How long did that repair take you?
Далее
I Missed With The Bottle😂
00:12
Просмотров 5 млн
HOLIDAY Dent Fix!!
15:30
Просмотров 2,7 млн
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 6 млн
When Paintless Dent Removal Goes Wrong! PDR Fail
12:31
СТОЯНОЧНЫЙ ТОРМОЗ на Газель.
0:51
😳 ВЫЖИВАЮ В ДРИФТ МАШИНЕ
0:39
Просмотров 982 тыс.