Тёмный

AUTO COLLISION REPAIR WITHOUT PAINTING! | WATCH how it's done with PDR 

Dent-Remover
Подписаться 54 тыс.
Просмотров 366 тыс.
50% 1

Now That’s A BIG Dent!
We had a discussion with the customer about expectations and they wanted to see how far a non evasive, Paintless Dent Repair could go and hopefully save the vehicle for a replacement panel, filler and repaint.
I take you on a step by step of how I tackled this repair on a Mercedes SLC rear 1/4 panel which I repaired with the help of Tom Lusted of Devon Dent Repair and founder of (Learn PDR Online.com)
Tom kindly made the trip from Devon to help out with this repair giving me his help from behind the camera and a top chap he is, makes a great brew too!
I started off the repair using the CanAuto GPR system, the large flat tabs, glue and the Elite Pro Lightweight Bridge Puller…..after 2 attempts the bulk started to move
This left a days worth of ripples and deep dents BUT with a lot of Toms Coffees and plenty of glue and PDR bars this damage was repaired to an as good standard
Join this channel to get access to perks:
/ @dentremover01
----------------
▫️To learn PDR online please visit
www.learnPDRonline.com
And also Tom is on RU-vid, @LearnPDROnline here’s a link to his channel
/ learnpdronline
----------------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods
------ Chapters------
00:00 Quick intro
01:02 Explaining the damage
03:49 Starting the repair (the 1st pull)
09:01 The second pull
12:08 Addressing the lower crown
14:43 Analysis of the damage
15:58 Rough out the frontal damage
16:50 Level Il the middle damage
19:48 Glue pull the rear damage
25:04 Another pass through the damage!
25:49 Analysis of the damage so far
27:31 Using PDR tools
30:10 Using sharp tools
31:28 Glue pull the last remaining lows
34:10 The final touches to the repair
35:23 My conclusion and Thank you
37:04 Before and afters
37:44 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
#pdr #collision #youtubevideo #gluepullrepairuk myrepair #DentRemoverBeverley #GPR #camautopro #vehiclerefinishing #camautoprouk #camauto #autobodyrepair #PaintlessDentRemoval #youtubedentvideo #autocollisionrepair #EastSide #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK

Авто/Мото

Опубликовано:

 

18 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 462   
@MrAllan9
@MrAllan9 9 месяцев назад
I'm a retired body mechanic of 30yrs, blown away by this technique. 30 yrs ago we didn't have the advanced paints that are used now that are resilient and flexable, but this video is like watching a sculpture artist at work. 👏
@dentremover01
@dentremover01 9 месяцев назад
Thank you Mr Allan for your great comment. Yes the paint used these days is very resilient and many types of damage can be saved. Even when an accident occurs the paint can withstand the impact. It’s nice to reply to adult comments instead of the “fake” and “you made the dent” comments! Thanks again Martin
@user-lc3ic9lw2b
@user-lc3ic9lw2b 8 месяцев назад
@@dentremover01😊
@chrisdoe6890
@chrisdoe6890 8 месяцев назад
Beautiful job Martin … you can tell you love your job and take suck pride in the outcome and rightly so. It takes skill and a keen eye for detail and you my friend have both . A new subscriber here . Well done indeed .
@wysokirafal
@wysokirafal 9 месяцев назад
I would love to see the reaction of the car owners when they come to pick them up.
@dentremover01
@dentremover01 9 месяцев назад
It was a great reaction! It’s always a pleasure to see our customers see the transformation!
@drdentrepair5530
@drdentrepair5530 Год назад
What a fantastic repair. I watched every second of this repair.
@dentremover01
@dentremover01 Год назад
wow thank you DR Dent Repair i really appreciate it and especially having the interest of another dent tech. im glad you enjoyed it 😁
@kylemcweeny878
@kylemcweeny878 3 месяца назад
😂 same. I tried not to blink! If someone talked to me, I would stop the video. Wait until the conversation was over, then rewind a little and have a go again.. 😂
@dingking7577
@dingking7577 Год назад
I love it when techs work together. In Tampa there’s not enough good techs to be considered competition so we work together.
@dentremover01
@dentremover01 Год назад
Il be your apprentice!
@JOHNABLANK
@JOHNABLANK 5 дней назад
Great job! It is amazing how this can be done without filler or paint.
@dentremover01
@dentremover01 5 дней назад
Thank you! With time, patience, the correct tools and skill. These repairs are possible
@stevedunshea4261
@stevedunshea4261 5 дней назад
When you put the glue pullers at the top I was yelling at the screen, Don't do it! The paint will crack! I was glad to be proven wrong.
@dentremover01
@dentremover01 5 дней назад
Amazing! I’m very happy I showed you how it’s possible to save a panel from the bodyshop and I hope you enjoyed it
@DA-yf5dn
@DA-yf5dn 7 месяцев назад
Absolutely brilliant video showing your skills Martin! I came across your channel by accident and you now have a new subscriber. What a true craftsman!
@dentremover01
@dentremover01 7 месяцев назад
Thank you DA I’m very happy you enjoy my video repairs 🙌🏼 I have a new video out today I hope you get time to see this too
@jorgemagalhaes7807
@jorgemagalhaes7807 7 месяцев назад
Veri good.
@BrendonHart1
@BrendonHart1 9 месяцев назад
That was a pleasure to watch!! Great job!!
@dentremover01
@dentremover01 9 месяцев назад
Thank you Brendon- a pleasure to read a nice comment! Thanks for watching 🙌🏼
@GeminiSeven43
@GeminiSeven43 10 месяцев назад
You Truly are an Artist with leverage and patience. Beautiful results and lots of hard work. Thanks so much for taking us along.
@dentremover01
@dentremover01 9 месяцев назад
Thank you so much for your kind comment. Not everyone gets the hard work that’s put into each repair… but to be appreciated and acknowledged is great! Thanks again Martin
@dentdetailpdr
@dentdetailpdr Год назад
Incredible repair and video Martin, had to watch in 2 sittings!
@dentremover01
@dentremover01 Год назад
2 is better than 3!
@tonym6920
@tonym6920 Год назад
You really have a keen eye, a lot of patience and a ton of experience and it shows, amazing work, you’re an artist! Cheers!
@dentremover01
@dentremover01 Год назад
Thank you Tony I really appreciate your kind comment. Yes it takes a lot of effort to do a repair like this! I needed a lay down after that one! 🙌🏼
@malcolmcurtis9786
@malcolmcurtis9786 9 месяцев назад
A credit to you sir. What a tradesman.👍👍👍🇬🇧
@dentremover01
@dentremover01 9 месяцев назад
Thank you Malcolm 🙌🏼
@douglasevans4871
@douglasevans4871 8 месяцев назад
Simply put, beautiful work!
@dentremover01
@dentremover01 3 месяца назад
Thank you so much
@jjcud
@jjcud 3 месяца назад
Thank-you for making this video. Very helpful. good production also.
@1st_track_dents
@1st_track_dents Год назад
Incredible Repair guys! With the skill and experience of both of you on this one, this dent had no chance! 💪👍
@dentremover01
@dentremover01 Год назад
Thank you Jake really appreciate your kind words and hope your well?
@markgoscinski3509
@markgoscinski3509 Год назад
You are outstanding Martin , original paint always better than respray and bodywork filler etc . If that was mine I'd have been ecstatic
@terrydimmock4723
@terrydimmock4723 Год назад
Wicked save 🥊🥊🔥🔥
@dentremover01
@dentremover01 Год назад
Thanks Terry
@tommorides8086
@tommorides8086 Год назад
Work to be proud of. Excellent job.
@dentremover01
@dentremover01 Год назад
Thank you Tommo 🙌🏼
@tommorides8086
@tommorides8086 Год назад
@@dentremover01 No problem. Im pondering on upskilling myself at the moment and potentially looking into this for work depending on how my current job role goes. I will see what my time brings.
@cgrschannel7256
@cgrschannel7256 Год назад
They glue is impressive! Great repair.
@asson4618
@asson4618 3 дня назад
I appreciate your videos!!! Thank you and your operator!!!
@bobbyknox9258
@bobbyknox9258 Год назад
Absolute artist 👌
@London.173
@London.173 Месяц назад
Quality skills amazing job ❤❤
@ronaldroberts9556
@ronaldroberts9556 7 месяцев назад
Bloody ‘ell! That was impressive! I did not expect that. Well done!
@dentremover01
@dentremover01 7 месяцев назад
Haha thanks Ronald!
@wayneallott
@wayneallott Год назад
Lovely tutorial and repair 👍
@dentremover01
@dentremover01 Год назад
Thanks Dronester appreciate
@longhuynh5249
@longhuynh5249 9 месяцев назад
I take my hat off for your patience!
@dentremover01
@dentremover01 9 месяцев назад
Thank you 🙌🏼
@mrgrumpy5116
@mrgrumpy5116 11 месяцев назад
you always do a good job, I could see that looked a bit tricky right from the beginning, super job and far better than filler and paint, well done. 😊👍
@dentremover01
@dentremover01 11 месяцев назад
Thank you Mr Grumpy!! I really appreciate your comment and yea your right it was a nasty one to fix. But got there in the end and our chanters was delighted! Take care, Martin
@user-ds1cn5jn9f
@user-ds1cn5jn9f 7 месяцев назад
That was amazing work 👍👑
@dentremover01
@dentremover01 4 месяца назад
Thank you
@johnnyuddstrand4330
@johnnyuddstrand4330 10 месяцев назад
Amazing work !
@dentremover01
@dentremover01 10 месяцев назад
Thank you!!
@stevebutler9315
@stevebutler9315 Год назад
Brilliant work
@dentremover01
@dentremover01 Год назад
Thanks Steve, your welcome to email me about your damage dent08@yahoo.com
@Jeff-kw8jj
@Jeff-kw8jj 10 месяцев назад
PURE ART!
@dentremover01
@dentremover01 9 месяцев назад
Thank you
@paorarokino
@paorarokino Год назад
Once again another great vid you are extremly great at your craft well done👍👍👍👍👍
@dentremover01
@dentremover01 Год назад
Thanks Paul, appreciated and thanks for watching 😁
@coreybishop3768
@coreybishop3768 Год назад
Nice job, not only saving customer money on conventional bodywork repairs but also no hassle trying to match paint. Top Notch repair 👍👍
@dentremover01
@dentremover01 Год назад
Thanks Corey
@justplanefred
@justplanefred Год назад
That's amazing! When I was doing body work, that definitely would have been repainted and had filler in it.
@ruthbees7214
@ruthbees7214 10 месяцев назад
Amazing repair if that was my car I would be chuffed to bits. No painting filler or panel replacement. Like new and the best bit nobody would know.😁❤
@dentremover01
@dentremover01 9 месяцев назад
Thank you Ruth it’s great to hear another person appreciate the PDR Method as appose to slate us for our work. Amazing comment thanks ❤️
@dentremover01
@dentremover01 9 месяцев назад
Thank you Ruth it’s great to hear another person appreciate the PDR Method as appose to slate us for our work. Amazing comment thanks ❤️
@vwccrline
@vwccrline 8 месяцев назад
Wow that's an amazingly clean dent, no scrapes, scratches or chips in the paint!
@dentremover01
@dentremover01 4 месяца назад
Lucky escape, the customer reversed into a protruding window sill at low speed
@johngardner2807
@johngardner2807 10 месяцев назад
Excellent work !
@dentremover01
@dentremover01 9 месяцев назад
Thank you John
@markkrimmel829
@markkrimmel829 Год назад
Amazing work
@dentremover01
@dentremover01 Год назад
Thank you Mark
@noelconnor8539
@noelconnor8539 7 месяцев назад
As a metal finnisher itake my HAT OFF TO YOU ❤❤
@dentremover01
@dentremover01 7 месяцев назад
Hi Noel thank you very much for your kind comment. I bet watching you work would be very interesting too I’ve seen metal smiths/runners work and I really enjoy the skillset 🙌🏼
@saleemakhtar4108
@saleemakhtar4108 7 месяцев назад
Congratulations, very good job. Keep it up
@dentremover01
@dentremover01 4 месяца назад
Thank you very muchn
@carllamb6711
@carllamb6711 9 месяцев назад
You, my friend are very talented man. I loved every minute of watching you doing this, and I have now subscribed and not forgetting the liked. Can’t wait for the next one.🎉😊
@dentremover01
@dentremover01 9 месяцев назад
Thank you Carl. I’m on with a couple of videos I hope to have them finished asap Thanks for subscribing too very kind of you
@MaxMax-th7uz
@MaxMax-th7uz Год назад
Great repairer and very laid back presenting style !
@dentremover01
@dentremover01 Год назад
Wow thanks Max great feedback I really appreciate it. It was a true repair showing what goes on in the shop!
@georgesilveira4936
@georgesilveira4936 Год назад
@@dentremover01 nice job 👍, how many hrs and Hoy much 💰
@Reevesi
@Reevesi 2 месяца назад
From Zero to Hero on that panel. Great job
@dentremover01
@dentremover01 2 месяца назад
Thank you
@panchogonzales6409
@panchogonzales6409 11 месяцев назад
We are totally different regarding cars in the USA, we drive them and beat the devil out of them for 10 years. You are an artist!
@kevinborden2477
@kevinborden2477 Год назад
Amazing work!!! You are definitely a Master Craftsman.. Thank you for sharing these repairs with us.
@dentremover01
@dentremover01 Год назад
Thank you Kevin i really appreciate your comment
@raymondchadwick3577
@raymondchadwick3577 9 месяцев назад
You young man, are an absolute genius, and a very very good looking one at that!
@dentremover01
@dentremover01 9 месяцев назад
Thank you very much!
@dariuszzatorski3305
@dariuszzatorski3305 Год назад
Great job Tom! 👍Regards from Canada!
@LearnPDROnline
@LearnPDROnline Год назад
Thanks, my camera work was a little shaky at times but I certainly enjoyed the process!
@dentremover01
@dentremover01 Год назад
No you where spot on Tom very grateful to have you help me out
@waynek921
@waynek921 9 месяцев назад
Fantastic workmanship thats a good eye and patients. Well done sir.
@dentremover01
@dentremover01 9 месяцев назад
Thank you Wayne
@stuartedge5906
@stuartedge5906 3 месяца назад
Great work. This is the opposite to "you get your leg, let's cut it off and transplant a new one".
@tonybilco1317
@tonybilco1317 10 месяцев назад
Seen many different dent removal videos...this guy is a magician beyond human skiĺl absolutely flawless repair..great video loved the talk through tuition more videos please ❤
@dentremover01
@dentremover01 10 месяцев назад
Thank you To y for your great feedback. It really helps Looking forward to releasing my uo coming repair videos asap
@walker1175
@walker1175 5 месяцев назад
Artist at work!
@dentremover01
@dentremover01 4 месяца назад
Thank you so much
@ryanhamilton9709
@ryanhamilton9709 11 месяцев назад
Great job! I wish i had u and ur pulling tool to help me to fix my rear fender on my mustang
@richardpelzer3797
@richardpelzer3797 2 месяца назад
Starting at the smaller damage relives the tension of the big dent
@dentremover01
@dentremover01 2 месяца назад
Sometimes, I prefer to start closest to a crown as that’s where the tension sits. I don’t go for the deepest part.
@dimpypuri1870
@dimpypuri1870 7 месяцев назад
excellent channel .....excellent work .....brilliantly covered ....love from INDIA 😊
@dentremover01
@dentremover01 6 месяцев назад
Thank you kindly 🙏
@joseedimilsonpereiragomes2400
Very good!
@franciscoramos226
@franciscoramos226 Год назад
Hey Martin, ... hat off to you and your amazing repair 🔝💯 ... I wish you and your family a Merry Christmas 🥂🥂 and a Happy New Year
@dentremover01
@dentremover01 Год назад
Hey Francisco happy new year to you and family. Thanks for watching and commenting
@paulblakeley4014
@paulblakeley4014 7 месяцев назад
Nice job 👏
@dentremover01
@dentremover01 7 месяцев назад
Thanks 😁
@alfharris7459
@alfharris7459 3 месяца назад
Tough job that one, usual brilliant result
@jbrown7403
@jbrown7403 4 месяца назад
You are a true wizard and magician! I’ve had pretty good luck repairing some minor issues thanks to your very helpful videos! Cheers from Texas! 🍻👍
@dentremover01
@dentremover01 4 месяца назад
Amazing to hear that I helped you repair your car! Thanks for watching and commenting very much JBrown appreciated 😊
@ozzstars_cars
@ozzstars_cars 10 месяцев назад
Cracking job there mate!
@dentremover01
@dentremover01 9 месяцев назад
Thank you 🙌🏼
@petecroxford3277
@petecroxford3277 4 месяца назад
That was a lot of patience and a lot of skill and knowledge brilliant 🇬🇧🇬🇧👍👍👏👏👏👏👏⭐️⭐️
@dentremover01
@dentremover01 4 месяца назад
Thank you for your comment Pete and for watching! Hope you enjoyed it and my other vids Hands
@dentremover01
@dentremover01 4 месяца назад
🙌🏼
@Cease0886
@Cease0886 Месяц назад
Really loved your video!! It's basically like a ride long in your days work. I've been looking into getting into PDR, it looks. Challenging yet rewarding. And you've inspired me, my friend. Thank you, and keep up the awesome content and excellent work.
@dentremover01
@dentremover01 8 дней назад
Amazing comment and thank you so much. I wish you all the best with your PDR journey and 2024
@linedancer111
@linedancer111 8 месяцев назад
Fantastic job, just love this, in my day new panel or loads of filler, thank you!
@dentremover01
@dentremover01 3 месяца назад
Thank you. The original estimate was for a new 1/4 but the customer didn’t want to do that. Didn’t want filler either so they asked if I could “try” and save it. I love a challenge!
@TheNorthernmunky
@TheNorthernmunky 9 месяцев назад
Awesome job mate
@dentremover01
@dentremover01 9 месяцев назад
Thank you
@salahelahmar6151
@salahelahmar6151 Год назад
excellent job!!
@dentremover01
@dentremover01 Год назад
Thank you Salah 🙌🏼
@Thunder-xo1cx
@Thunder-xo1cx 4 месяца назад
Wow amazing job 👍
@dentremover01
@dentremover01 4 месяца назад
Thank you!
@barryrudge1576
@barryrudge1576 10 месяцев назад
It is knowing with experience and practise where to locate and glue the pins and how much pressure to apply. So many people moan about the cost of a repair. Not only is it your time and materials that the customer is paying for it is also your skill.
@dentremover01
@dentremover01 9 месяцев назад
100% thank you. That’s right a lot of the time people just see the time involved say 5 minutes to fix a dent for £300 They just see that it took you 5 minutes and I want 300 and they can’t compute this. They think that to give a bodyshop the same damage and it takes 3 days for them to wreck it with filler and paint somehow it is value for money for the customer!! Crazy but true.
@raysfo
@raysfo 7 месяцев назад
You did a very good job on that quarter panel. I used to tap on the high spots while pulling on the panel. It release the tension much better. What you doing is much better and faster than the old days. We had nail guns to pull the dents out than filler the panel before painting it. You made it so easy good job well done.👍
@dentremover01
@dentremover01 3 месяца назад
Thank you RaySfo I totally get you, this is very similar to panel beating with the pins and I agree about tapping the crowns at the same time
@JohnnyBailey-jq1qm
@JohnnyBailey-jq1qm 2 месяца назад
Keep in mind these repairs take a lot longer than these cut videos might seam . People don’t have good enough attention spans otherwise. But no doubt this guy has mastered his craft and is faster than most. The average PDR guy couldn’t even do this
@robpracht9303
@robpracht9303 3 месяца назад
Wonderman...unbelievable ..master.
@theprior46
@theprior46 9 месяцев назад
This is the essence of skill and patience allied to sheer artistry and science all working in concert. I imagine the technique only works with paint that hasn't be split or cracked by the dent damage. This blemish free damage is quite a tribute to the quality and thickness of Mercedes body paint! Great video and inspiring to see something done so well.
@dentremover01
@dentremover01 9 месяцев назад
Hi thanks for your comment, we can achieve amazing results with PDR. And we can still carry out the exact repairs on damaged paint- we call this push to paint, where the bodyshop then takes over and repainted the panel Thanks for watching and commenting Martin
@chrisscott8991
@chrisscott8991 Год назад
Great job on the repair..I usually tap down some of the big crowns before I start pulling it does help relieve all of the tension for a better pull
@dentremover01
@dentremover01 Год назад
Hi Chris. I totally get your repair method. There’s a lot to take in when trying to organise a repair and film! I do sometimes tap but I prefer to lightly pull and see how the damage reacts and then tap the highs- I prefer not to repair big dents either but I seem to always get them! Lol
@thenaggars124
@thenaggars124 Год назад
Now that is some high quality pdr ladies and gentlemen, this guy has got his shit together. Less than 5% of techs are this good . I have 20 years under my belt and would’ve just passed or said maybe 80% better in trade for your first born child. Great work Martin, hats off to you!
@dentremover01
@dentremover01 Год назад
Thank you Brendan I really appreciate your kind words. I do take on these horrid repairs! This was a friend of mine and I said I’d see what I can do and also make a video of it Turned out alright! We agreed to get it to a standard that is acceptable and could be buzzed down if needed and repainted. Well done doing 20yrs respect to you sir 🙌🏼
@TheSharkGirls
@TheSharkGirls Год назад
You've inspired me to have a go myself. I'm amazed with the results. I've done 2 badly dented doors +1ft, a rear quarter panel & door going over a curved bodyline, an aluminium bonnet with a 1ft dent and I'll be onto the guards next. I can already see I'll only need a thin smear of putty over gouged metal. I even had a go at some annoying dents in a 30 yr old Subaru & I'm thrilled. Thank you.
@dentremover01
@dentremover01 Год назад
Excellent! So if you’ve also filled it a little bit after pulling the damage out then that’s called a Glue Pull Repair GPR and it’s a much better way of repairing large damage with glue than welding pins onto the panel and damaging the Ecoat both sides of the panel. Well done again 🙌🏼
@superkev2000
@superkev2000 Год назад
Great video and great repair Martin and Tom! I wonder if lateral tension would have helped save some time on this one. I haven't tried it yet but it seems like its all the rage these days. Thanks for sharing your expertise and knowledge! -Kevin McBride
@dentremover01
@dentremover01 10 месяцев назад
Hey Kevin! Thanks and yea I admit LTS would have defo helped. I have a few LTS to try on my future smashes and it really does help. Hope your well? 🙌🏼
@bassoonman211
@bassoonman211 Год назад
Excellent job. Hard to believe that this process makes sense rather than replacing the complete panel.
@dentremover01
@dentremover01 Год назад
Thanks Martin, its the least evasive method and the best to try before removing the paint or panel
@arm3828
@arm3828 Год назад
@@dentremover01 hi what's the name of the tool that you working with on 13:45 min ?
@briankuehn5379
@briankuehn5379 9 месяцев назад
@arm3828 it was a smaller slide-hammer Great work!!
@jarnosaarinen4583
@jarnosaarinen4583 7 месяцев назад
Very nice job!
@dentremover01
@dentremover01 7 месяцев назад
Thank you !
@gkltpcalculator
@gkltpcalculator Год назад
Nice Work sir 👍👍
@dentremover01
@dentremover01 Год назад
Thank you very much 1st Trick Mech!
@cx144
@cx144 9 месяцев назад
Très beau travail, je ne pensais-pas que ce fut possible, surprenant, bravo !
@dentremover01
@dentremover01 9 месяцев назад
Great results! Thanks for watching
@ramiromartinez936
@ramiromartinez936 Год назад
Excelente trabajo..saludos desde Guadalajara Jalisco.. México
@DentfreeEurope
@DentfreeEurope 9 месяцев назад
Hi there colleague, well done, I've been in the business of repairing all kinds of vehicles for about 55 years now, done all sorts of jobs in the automotive sector, from mechanic, panel-beater, painter, and lately, I've been doing this paintless dent repair job since 1995, the dents we are asked to repair are getting more difficult, bigger and complicated for us, so it's getting tougher, so the one's that expand their abilities, as we do, will always have something to do, and will survive harsher times, as for example what happened with the covid pandemic, our line or work was considered unessential in that period, either for the garages, car sellers or vehicle owners. Cheers to a job well done !!
@dentremover01
@dentremover01 9 месяцев назад
Hi thank you for your great comment and 55 years wow! Well done sir. PDR has come a real long way in recent years with glue pulling becoming more popular too. Techs are pushing the boundaries to showcase their skills and that’s a great thing for the industry. But also it does make it harder for other techs because more is expected than simply pushing small dings out all day. I hope your still pushing and enjoying PDR Thanks for watching and enjoying my videos Martin
@coloradofleetworks8852
@coloradofleetworks8852 9 месяцев назад
Loved that you used fog and lines good job Martin . Hope to see you at mte
@dentremover01
@dentremover01 9 месяцев назад
Thank you! I like to give different angles and use all the reflection sources where possible….Yes il be there in February!!
@grantssmartrepairs
@grantssmartrepairs 6 месяцев назад
great work id love to learn pdr 29 years in bodyshop and it fascinates me 👍👍
@dentremover01
@dentremover01 6 месяцев назад
Thanks Grants Smart Repairs I’d say go for it, it will really help you with your repairs and in the future you can offer it as another service
@chrissmith8280
@chrissmith8280 9 месяцев назад
Absolutely stunning! So was the dent repair… 😅
@dentremover01
@dentremover01 9 месяцев назад
Haha thanks!
@deanhawthorn5783
@deanhawthorn5783 9 месяцев назад
there is a man in paignton devon who does this....he is amazing
@dentremover01
@dentremover01 9 месяцев назад
That’s great. What’s his name?
@keithgreen9009
@keithgreen9009 10 месяцев назад
What a artist
@dentremover01
@dentremover01 9 месяцев назад
Amazing comment thanks
@andymcvean9631
@andymcvean9631 9 месяцев назад
Brilliant job, super impressive work, a real art. I still can't understand why the paint isn't breached with these punches. Thanks for sharing.
@dentremover01
@dentremover01 9 месяцев назад
Thanks Andy. Yes I agree, I see this daily and it’s amazing how the paint stays intact upon impact. Don’t get me wrong there’s some superficial dings that the paint gives up- every dent is different Thanks for commenting and watching
@frankpavan7865
@frankpavan7865 7 месяцев назад
Thank you for this video. Definetly a large challenging dent !! I use cam auto glue as well. 👍 from Montreal, 🇨🇦
@dentremover01
@dentremover01 6 месяцев назад
Thanks Frank. Camauto gear is excellent, and they are in Canada too!
@keymad4
@keymad4 Год назад
Brilliant.
@dentremover01
@dentremover01 Год назад
Thanks Keymad4
@ezequielalarcon9937
@ezequielalarcon9937 5 месяцев назад
I have been do it body work most my life part of work but these techniques had me staring changed to that level PDR my respect what great job you doing man 👍
@dentremover01
@dentremover01 4 месяца назад
Amazing! Thank you so much! Maybe try to learn this too when you’re in the bodyshop??
@inekelassooij840
@inekelassooij840 6 месяцев назад
Geweldig gedaan top job 👌👍Groetjes uit Holland 👋🏼🇳🇱
@dentremover01
@dentremover01 4 месяца назад
Thank you so much, we love Holland and Konnigdag 🇳🇱
@tl1948
@tl1948 7 месяцев назад
Great skills
@dentremover01
@dentremover01 4 месяца назад
Thank you
@whatdoyouthinktodd
@whatdoyouthinktodd 8 месяцев назад
I have been an auto body repairman for 40 years and been doing PDR for the last five. I live in Michigan USA and in the winter it gets pretty cold. So when I work on a quarter panel when it's cold I put an electric heater in the trunk aimed at the panel that I'm working on to keep it hot while I pull. Sounds funny but it seems to work.
@dentremover01
@dentremover01 8 месяцев назад
What a great idea!!! Il give that a go because it gets Baltic in my workshop during winter!
@dentremover01
@dentremover01 Год назад
Please let me know how you would start the repair….. once you e seen the video Start your reply with #MyRepair
@dingking7577
@dingking7577 Год назад
HEY MARTIN! GREAT TO SEE YOU (even if only on video) HI G! Jaime says hi too. Holy crap I just saw the dent. Looking forward to seeing the end.
@dentremover01
@dentremover01 Год назад
Hey Tommy! Thanks matey and hi Jamie! Hope ya’all well? See you very soon! 🍺
@cardo1111
@cardo1111 Год назад
Very impressive, saved the customer from weeks at a body shop, with a disrupted factory finish, needless scans...
@1967250s
@1967250s 11 месяцев назад
I would have started on the lower secondary area to release the pressure on the main upper damage, but nicely done. Those corners and ends must have had a lot of pressure built up from the impact. Pretty amazing that the paint is that strong to hold onto the metal.
@Stickleback
@Stickleback 8 месяцев назад
i 2nd that 1st bit, good comment.
@dentremover01
@dentremover01 8 месяцев назад
Great method. I really didn’t think it would be so tough to pull out! Easing the lower area would have released some tension and those Ehe crowns where a beast!
@Electrobilia
@Electrobilia 7 месяцев назад
As usual, very nice work. Also...protect your hearing! You'll be glad you did...thx for upload.
@dentremover01
@dentremover01 7 месяцев назад
Thank you, I usually wear noise cancelling plugs day to day! With a bit of music!
@spengmckenzie612
@spengmckenzie612 11 месяцев назад
Amazing work brother really amazing but I ain’t got that much patience lol
@dentremover01
@dentremover01 4 месяца назад
Morning Dabrew my pleasure! I know this video had its flaws and I learnt from it like I do with all my videos. It’s crazy trying to organise all the cameras, mics, set ups and think about how I’m going to fix the damage at the same time! From this I learnt to Mic check on every take. Also camera placement, I always have 2 cameras on at the same time as a minimum Also with new iPhones and cameras they shoot in HDR which the editing software doesn’t like 🫣 I got caught out on the Skoda Superb video with that one. So all cameras are set to normal SDR to make it better to edit So much to organise but it’s worth it in the end. Also replying to comments takes hours but I try my best to reply when I get free time Thanks again and take care Martin
@davecooke914
@davecooke914 Год назад
Amazing job really bad dent keep up great work 👍 👍
@MorindaSilly-rn9dl
@MorindaSilly-rn9dl 3 месяца назад
I like ur job is good job
Далее
HOLIDAY Dent Fix!!
15:30
Просмотров 2,6 млн
Реинкарнация
00:47
Просмотров 837 тыс.
The perfect plank !! 😱😱
00:19
Просмотров 1,8 млн
Subaru Fender Paintless Dent Removal
14:31
Просмотров 13 тыс.
NASTY WING SMASH! | My Step by Step Repair Method
12:31
Removing BODYLINE Dents! | GLUE or PUSH? What’s best?
11:09
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 5 млн
When your Engine has a Car…
0:15
Просмотров 2,7 млн