Thrustmaster Pendular Rudder Pedals - Review and Initial Impressions!

Подписаться 7 тыс.

Просмотров 120 тыс.

50% 1

How do these pedals compare to the pedals I'm currently using and have used in the past? Watch the video to find out! Preorder your set here: amzn.to/2wigbPy
More awesome flight simulator gear I use and recommend:
psyjn.ir/AmazonStore
I'll be streaming on Twitch and answering any questions y'all might have about these bad boys, if you haven't subscribed over there yet here's the link: / psyrixx
If you don't watch live streams or have a question you'd like answered in a future RU-vid video, leave me a comment down below! Like, subscribe, share with your friends, and all that jazz.
--
The Thrustmaster Pendular Rudder Pedals are the latest product to be built to the same exacting standards of the HOTAS Warthog - and they come with a price tag to match! Do I think they're worth it? The tl;dr is: yes, absolutely.
HallEffect sensors on each of the three individual axis (rudder axis, as well as each brake) results in some of the smoothest, most precise, and realistic yaw control I've ever experienced on a computer. This coupled with the fact that the pedals are more or less free standing and push back and forth like they would in a real aircraft makes these the most natural feeling peripheral on the market today.
Weighing in at just over 16lbs (7.3kg), the TPR pedals are SOLID. Despite that fact, do they still slide around when you use them? Watch the video to find out this and more!
Full disclosure: I was sent this set of TPR Pedals by Thrustmaster after meeting the North American Market Manager at Oshkosh 2018. I expressed interest in the pedals and noted how my MFG Crosswind pedals kept falling apart. This is NOT a sponsored review, and if these pedals were terrible I guarantee I would have no problem expressing that fact.
Having been a very satisfied Thrustmaster customer for the past seven or so years (HOTAS Warthog, T16000 Stick and Throttle, etc) they definitely had a high standard to meet. And in my opinion they absolutely nailed it.
Yes, these pedals are expensive. So is the HOTAS Warthog. I'm pretty sure that just like the HOTAS Warthog these will be going on sale fairly regularly. If the MSRP is out of your ballpark, wait for a sale!

Игры

Опубликовано:

22 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 266

@hirohikonishikawa4851 5 лет назад

I am a 58 year old japanese businessman. I always liked simulations , over the last 20 years I have bought many different Joysticks and systems. Rarely had a good experience with smaller companies like crosswind, they always promise you superior quality but in reality it is hardly the case. Those things can break also very easily. I always looked for the best solution so I gave many small companies a shot and will not anymore. The things I bought by thrustmaster are cheaper in the costs and holded up as good as the much costier ones. These days my employees if they happen to buy something new bring it to my office and I will be the first one who will test it. I like those pendular rudder pedals, but they cost more than the warthog hotas set which is not an option financial wise for most people I can expect.

@xdiver01 2 года назад

@Deadhorse I have the virpil and I didn´t like it, for me TPR is far better.

@JamesW81 Год назад

@Deadhorse I want the Virpil VFX and these pedals. If it's not obvious I'm a bit of a Tomcat fan!

@schannel7138 Год назад

Please be merciful when you pilot those who have taken alcohol and benzodiazepines together. Thank you.

@paulweston8184 Год назад

You are a 58 year old Japanese businessman? You've go perfect first born American English dialect. These days your employees, if they happen to buy something new? bring it to your office and you will be the first one who will test it? If I buy something new, I take it home and *I'm* the first one who tests it. Do you think pretending to be an old wise Japanese businessman makes your opinion seem more relevant. I guess if I were pretending to be a prominent Japanese businessman, I would find an image of an older Japanese man in a suit but I wouldn't choose one that would come up on a google image search with the name Kunio Inoue who is 68 not 58 at the time of this photograph.

@KillerKev1961 11 месяцев назад

Yes, cost prohibitive for most. I make due with Saitek for now. Arrigato.

@heckpupper9532 6 лет назад

Everything about them looks really nice, except for the price tag. At $250-300 dolars I'd certainly consider getting a pair, 500 bucks is just an overkill.

@psyrixx 6 лет назад

I totally agree on the pricing being a bit steep - I picked up my HOTAS Warthog during one of the many times they went on sale and felt like it was an incredible value for the money. I figure these are going to be the same!

@2Fast4Mellow 6 лет назад

Compared to CH Products and Saitek, yes they are expensive. However, compared to FDS rudders which costs over 1000 USD, they suddenly not that expensive. I have my Warthog for 4 years now and I still love them. The MFD was a bit of a bummer, but they're great for FS17 or ETS2/ATS. I have have both the CH Products and Saitek rudders, but I had to open them up every 3 to 4 months to remove all the sand and dust to make it smooth again. And like Robert was saying, they have a very clear and distinct center position. This is not a real problem for fixed wings, but with rotorcraft, you'll need more subtle controls.. I won't be running to the stores when it comes out, but it will definitely on my shopping list. On the other hand, people are also crazy enough to pay more than 1000 dollars/euros for a IPhone. And most people use a phone for only 2 years.. It's not cheap, but this will be a purchase that lasts easily for 10 years..

@martin.B777 5 лет назад

What would be a good price for the TM Warthhog HOTAS?

@heckpupper9532 5 лет назад

Whatever the market price is. I used it for 3 years now, it's really good (has some reaaaally minor flaws to it) but it's good. Those pedals though, are really too expensive especially compared to their counterparts such as MFG Crosswinds or similar.

@psyrixx 5 лет назад

I got mine for $325 if I remember correctly... Amazon.com usually has them on sale from time to time, so does B&H Photo. Just keep an eye open!

@piotrscibor1257 9 месяцев назад

They won't slip at all if you use the holes in the stand to screw them to the floor. It also shows your level of commitment to indoor flying ;)

@lucianosantana5103 4 года назад

Best review I’ve seen so far about this product!! Thanks buddy.

@markellis789 5 лет назад

I also bought these rudder pedals and have had then about a month now. They are fantastic. I'm currently in training for my PPL using a Cessna 172-R for the training aircraft. In X-Plane 11 these pedals are very close to the real thing.

@djacintphilipdumapias1217 5 лет назад

A quality in depth review mate, cheers

@Jinx7red 3 года назад

2 years later love that t-shirt! Calvin n Hobbes! also appreciated your review. subbed. just got the warthog 2 piece, looking for good rudders.

@zk9058 5 лет назад

We need to get you some new sneaks. With that being said, I’m really excited about these pedals. Thank you for the review. And idea when they will hit the stores?

@ScubaSteveTXST 6 лет назад

Thanks I have the TFRP ones now paired with a warthog hotas and these look like a great upgrade

@Name-ps9fx 6 лет назад

Damn you Thrustmaster! Looks like my cockpit needs a $1,000 Warthog/throttle/TPR upgrade...!

@psyrixx 6 лет назад

I absolutely love my HOTAS Warthog. That being said, the T16000 also has HallEffect sensors and I think uses the exact same centering spring as the Warthog -- might give it a look if you want to save a few dollars... but the feel of the HOTAS Warthog (weight, mostly metal construction, etc) is just incredible.

@Name-ps9fx 6 лет назад

Warthog is definitely the current “gold standard”, but there is a Russian company putting out a really good dual throttle control and joystick...roughly comparable in price but like these pedals, they are easily adjustable and very well built (all metal).

@FlaminSquirrel 6 лет назад

The Warthog is definitely NOT gold standard. It has a poor quality plastic gimbal with no bearings. VKB and Virpil both offer far superior sticks.

@MikeLitoris66 6 лет назад

Far from gold standard compared to VPC/VKB designs. Especially Warthogs plastic gimbal is pure crap compared to newer designs. I had Warthog hotas but replaced the stick with T-50 and it's a lot better, accurate and 9000 times better quality. Will replace the throttle soon in future.

@escalator9734 5 лет назад

@@psyrixx I know this is 4 month old and useless to reply, but the warthog is definitely not mostly metal construction. The stick handle is potmetal on the outside, but the base and most imporantly the gimbal is cheap plastic. There's also the stiction problem, coming form 2 oversized pin (or undersized holes), as well as the un trimmed plastic gimbal parts. The throttle is pittyful, with the handles in plastic, mounted on plastic axes with bad tolerances, inducing some or lots of play depending on the particular batch. All the weight comes from the 2 metal base plates (yes, 2, no reason why aside the weight marketing) and a stack of absolutely useless metal bars screwed on the inner plate, to add even more weight. I got it for 300€ buck and it's still overpriced

@dntlss 4 года назад

Man you sure make a good review, thank you.

@jameshuli1 5 лет назад

Well said review. I ordered one.

@fietef.4854 6 лет назад

Thanks for Review! I was close to get the MFGs, but since the TPR were announced i was curious if they would fit helo flying more. They look like VKB Rudder with brakes. Perfect for doing plane and helo!

@psyrixx 6 лет назад

Despite the good review, and the fact that I really do like these, definitely take pricing into account. When these guys go on sale might be a better time to buy if cost is an issue. Like I said in the video, I got my set for free because I pestered the Marketing guy from Thrustmaster while I was at Oshkosh (I was already going to get these anyways) and he obviously saw a promotional opportunity. The one thing I didn't want this to come across as is a sales pitch and according to several replies on Reddit I failed at trying to avoid that. 😅 In any case, full disclosure -- don't trust me!

@Udon5 5 лет назад

Go to the VKB Website, the VKB Rudder can do Brake now. I perfer the VKB Rudder especially I'm mainly using it for Helicopter Flight

@bmbpdk 3 года назад

Hello Robert. Thank you for this review and all of your other aviation related videos! Finally after 2½ years, i have money to spare on a set of these bad boys! TPR HYPE WOOP WOOP

@psyrixx 3 года назад

If you can wait just a little bit longer, Honeycomb is going to be releasing their Charlie rudder pedals early next year -- they look to be pretty awesome and may be significantly cheaper than the Thrustmaster TPR pedals. That being said, I still love the Thrustmasters over two years later. Food for thought though! :-)

@bmbpdk 3 года назад

@@psyrixx Interesting point and thanks for the headsup. But i guess im Thrustmaster biased and dont mind paying top dollar for a top product. Yes, i once also got caught in the Saitek/madcatz mania and learned some tough lessons there. Ive had the Thrustmaster Warthog HOTAS since like forever, i believe i got it a year after release. Honeycomb products needs more user experience and market experience before i would buy their product.

@cbonesteaksauce3833 Год назад

@@psyrixx here I am in 2022 giving up on my Charlie’s, watching your video to see if these will be a good alternative. 😢

@ralphconnell8163 Год назад

Thank you. Excellent summary.

@wlbear2570 3 года назад

Bought my son the saitek pro pedals back in 2014 and had buy a second set in 2016 then in 2018 the second pair broke as well so decided to get him this pedals. Worth four times more than the saitek ones but worth every penny and by the feel and build quality they give me the feeling they’ll last a lifetime if used with care.

@rcpilot9963 5 лет назад

Thrustmaster Pendular Rudder Pedals? My next PC parts upgrade after using CH Rudder Pedals for 9 years, thanks for good review.

@GtsAntoni1 2 года назад

If pedals are sliding, and you can't put them against a wall, the easiest fix is a thick MDF base. Add rubber feet feet for wood floors, and speaker spikes for carpet. Cheap, easy and effective.

@robert48tube 5 лет назад

I have 1st gen MFG Crosswind Rudders, no breakages, fantastic build quality, no problems and they are also Hall effect so MUCH better than most. I soooo wish MFG could build a throttle with same quality as rudders so I can bin my awful Saitek/Logitech throttle quadrant...think I’m on my 4th and similar with yoke so now enjoy the Yoko ! Yes, my MFG rudders and Yoko Yoke come at a price but quality far exceeds the Saiteks I used for years and glad to see Thrustmaster upping their game !

@zeeman9057 3 года назад

I have been using my 2nd gen MFGs since 2017 and they still look and feel like new. A month ago I also got the SLAW pedals and now spent time to get used to them 😀

@rovpilot1 4 года назад

If TM could design a set that resembles the F16 style in this quality, I would buy em in a heartbeat. So far my Saitek rudder is the best option

@antonwestergaard5211 4 года назад

*y e s*

@pilot1009 3 года назад

Xplane 11 since 2017 Running Pro FAA Hardware , Yoko Yoke, Precision flight controls throttle quadrant with Gear Ruder Trim and Flap controls and Thrustmaster Pendular Rudder Pedals . These Pedals are excellent . I have been running them for about 2 years bolted to the floor . PP SEL since 1969 flying C-150, C172, Stinson 108-1 . 20,000 hours on Xplane most time in the Pilatus PC-12, Wonderful Plane. AC4R

@wsa6688 5 лет назад

Cool shirt😏 the pedals look nice! But for starters it is best to buy 3 monitors angeled correctly and buy track IR. It is one of the best upgrades u can have, for me at least. TrackIR is a must have. VR is unknown to me but i can easily fly around for 5/6 hours before i get a sour butt sitting to long😅 i will buy these pedals one day. Thanks for the video👍🏻

@theredsnatter 5 лет назад

Go VR! buy a rift s and you will never go back! instead of looking at a cockpit on a flat screen you are in the cockpit!. I just built a computer with the intention to go 3 screen and track ir but i bought a rift s and now i can never go back. its gaming in 3d, you feel like if you reach out you will touch the dials tho your mind is sometimes fooled so no barrel rolls for the first 3 days till you get used to it or you could be sick and that would never happen on a flat screen. Thats how much more real it feels!

@malthomas987 2 года назад

been using MFG pedals for over 8 years still as good as new have changed components to "tune" them to my preference. Disclaimer only ever used CH pedals and i had to import those from the USA because in 2013 usable pedals did not exist in the UK. my MFG pedals work just fine.

@theoverthinker1978 Год назад

Damn!! I love your shirt bro 🤌

@haavard1989 4 года назад

I was thinking the price tag was a little steep, but just by looking at the machined pieces, hinges, sensors and stuff, it shure looks like it's well worth the price.

@sigbauer9782 Год назад

these are not toys...it's pure machine art.

@joergbock1976 Год назад

Thanks for the detailed video, it convinced me to invest thrice the money and buy these instead of the Logitech rudders. It's certainly a deep cut, but similar to the Warthog Hotas you get a quality that is on a whole different level and so is the experience and immersion in the game. For decades, I played sims and sci-fi games with my old Logitech Extreme 3D Pro and while it gives you all basic controls in a neat setup, precision control is not a thing with twist-rudder sticks. Trying to taxi the recently released Messerschmitt BF 109G (MSFS) is next to impossible, as it relies heavily on brakes for turns. Can't wait for these pedals.

@ackattacker 2 года назад

I think some of your criticisms of the MFG are a little unfair. You can purchase them with the same style of "combat pedals" that the TPR comes with, which work well with heel on floor (which I also prefer). I have mine mounted to a wheelstand pro rig (any of these high end pedals deserve to be mounted to something IMO) and the extra height the rig provides makes the combat pedal height perfect when used that way. The new version also fixes the defect where the epoxy can break, there is no epoxy in the new style. The MFG's also use hall effect sensors with high precision so not sure where you draw that distinction, in terms of precision they are identical. An additional thing to note is that the MFG can be ordered with a relatively inexpensive damper which really adds to the feel, people have adapted dampers to the TPR's but it's a bit of a kludge. Last point I'll make is that the MFG pedals have a larger travel than the TPR which I find more realistic for most planes, and I've flown many (8 type ratings). While the TPR's are high quality and you really can't go wrong with either choice, for less money I think the MFG pedals represent a better choice. Additionally, you are supporting a small business in Italy. Thrustmaster manufactures in China, if you care about such things.

@sebastiankorfanty8015 Год назад

MFGs are made in and designed in Croatia not in Italy. Other than that thanks for your point of view.

@PanaLumberjack 4 года назад

Love the review, but where are the follow up vids that were promised?

@Dg-zj6jo 4 года назад

just brought em cheers

@dartvader4081 6 лет назад

Thank you for this review. I'll consider these. (the price is ..HOT!🔥 ) @ 6:30 Man, you're just like me: you and I need a better cable management! 😁🤣

@psyrixx 6 лет назад

I think everyone needs better cable management!

@1SaG 2 года назад

I did do quite a bit of asking around among the guys I fly with regularly (lots and lots of MFG-users) and none of them reported any catastrophic failures like the one you had there. Not sure what versions they were using though. I just ordered a set of MFGs V3, but I will say that while they are probably a pretty substantial upgrade in tech, precision and feel, I never really found myself longing for a different set of pedals while I was using my CH Pro ones. Only now I have them in storage and find myself longing for *any* set of pedals while I'm forced to use the twist-axis on my VKB... yuck! The CH ones I have are old enough to have a driver's license by now... they are from 1995 or 1996 and I've been using them for years on a cheap gameport-to-USB converter. They still look, feel and work like new as far as I can tell. They were so good in fact that when I acquired a set of Saiteks for free I switched back to the CH ones almost immediately. In fairness: That's probably also due to the fact that the Saiteks were the worst pedals I've ever used. Clunky action no matter what I did to that tension-knob, nearly impossible to make small adjustments around the center position and due to their width and stance kinda uncomfortable - at least for me. Having only seen pics/videos of them, I'm not sure I'd even want those TM ones, even if they weren't insanely expensive. I mostly fly WW2 stuff and the occasional jet in DCS ... and AFAIK (but not 100% sure) the sliding action that CH, MFG, Saitek and others use is actually closer to what most of the planes had back then.

@algroyp3r 8 месяцев назад

To mount on a carpet easily, attach it with a velcro sticky tape. It will not budge unless you lift it up.

@pedrojulio5889 5 лет назад

Real world pilot, been a while. Been simming for 20years. Upgrading to?? Yoko yoke...maybe $900. Sooooo what good pedals. Your review is so good that every question I had you answered. My guess is as expensive as these are that this is the pedal that is going to become popular amongst serious expensive simming. I two TPM's which are ok and have not made up my mind on the SO MANY twim engine throttle upgrades from my piece of junk Ch throttles, 2nd junk set.

@paulsheather7657 5 лет назад

I have been doing some major upgrades on my PC and flight sim gear. I am not going to be reinstalling the old PD3v4 . will be just sticking with x plane as i feel the its just a better platform now. have been using MS force feedback for years with the FS force add on. also the siatek rudders peddles. moving up to the thrust master joystick and peddles soon.

@Corsair8X 5 лет назад

Could you measure the width at their widest point? I think they may be too wide for my Ozone cockpit but I would love to be wrong. If I'm wrong, then I'm definitely going to be buying this.

@GUSSTASS 2 года назад

I just bought a unit, and its worth every bit.

@cody42069420 2 года назад

Question, do real helicopter rudders have a spring to bring the rudder back to the neutral position? I see that most, if not all sim peddles do. I was watching a helicopter video that made it look like when you push the peddle it stays in position and the other peddlemoves the same amount in the opposite direction

@tomsawyer2112 Год назад

I have this fixed on my motion rig in front of my racing pedals, the two holes in the back fit perfectly on the plate. No need to remove the racing pedals. My sitting position is a bit further back, where my X-56 controllers are fixed, without removing my racing gear changes, and handbrakes. But I found the rudders too sensitive in DCS to keep the SU-25 going straight after the landing. It tried to curve down the initial movements, maybe not enough, or are rudders really that sensitive.

@arx_7804 4 года назад

Have you ever seen the rx viper by slaw device? They're I'm a similar price bracket

@daysofgrace2934 Год назад

Are the brakes load-cell i.e. pressure sensitive (hydraulic brakes are pressure sensitive) as opposed to measuring distance pressed? I’m planning on learning in a Cessna 152. I’m not bothered too much about budget as airtime is expensive in the UK £200+ an hour so anything that helps reduce time to translate from sim to reality is much appreciated…

@ivandiazpadilla9231 Год назад

Captain, thanks for your tutorial, I have a question, I checked the Thrustmaster TPR, when turning fully to the left and the same to the right, the rudder or the front tire of the plane only turns 10%, what could be happening in my configuration How can you help me?

@SBJ696 5 лет назад

I use the Logitech Pro Flight rudder pedals and while they worked as a starting point in my flight sim adventures I've begun to hate them after about a year of use. They're plastic, lightweight, flimsy and the tension system is pathetic. Not to mention they swivel side to side rather forward and back like the TPR pedals do. Looking forward to upgrading in the future to the TPR pedals, thanks for the review.

@aerobatgaming2033 5 лет назад

Wasn’t this stuff in exhibit hangar B, I checked out the thrustmaster booth and got to test these with the fighter simulator they had set up, these were by far the best simulator pedals I have ever used and the price is the only downside

@psyrixx 5 лет назад

Yep! That's where they were!

@Hipporider 4 года назад

Place some wood in between the rudder pedals and the wall your desk backs to and it can't slide. Or, cover the bottom with a wooden plate that has weights on it behind it

@psyrixx 4 года назад

I did that with my MFG Crosswinds and have secured my Thrustmaster TPR to a wooden sheet that keeps it the right distance from the wall. It's an excellent solution. :)

@justinspirational 4 года назад

thanks for your video- how do they compare to the MFG Crosswind V2 pedals? Do you have a preference over the two? Do the rudder pedals stay in position (like real rudder/anti torque pedals) or do they spring back to a center position? Do you 'feel' the center position like cheaper rudder pedals or nice and smooth? Thanks for your feedback

@psyrixx 4 года назад

Personally I feel they are much more realistic than the MFG Crosswind pedals. They don't stay in position like anti-torque pedals, they recenter like real world rudder pedals do in general aviation style aircraft. There isn't a solid "detent" center position, the action is super smooth.

@justinspirational 4 года назад

@@psyrixx OK thank you

@koolerpure 5 лет назад

after my , T16000 stick broke which i loved as the time i spoiled my self with the warthog, best decision ive made but because it cant yaw i need to get rudder pedals but damn this awesome thing is too expensive for what it is

@NGC008 5 лет назад

You get what you pay for I expect These pedals will last for years I imagine. Would love to see a cpmparison between these and the RUDDO pedals from Virtual Fly. Now those are REALLY expensive.

@terrellcole7633 6 лет назад

I want that shirt!

@psyrixx 6 лет назад

If you search for Calvin & Hobbes Chewie there are similar shirts available through Amazon.com. It's one of my favorites!

@uneCENT 4 года назад

Great review man... now to cut more lawns so I can fly in first class lol

@rockyjetproject1345 4 года назад

Lmao, I’m gonna have to put more Overtime for this but it looks like it’s worth it. Might as well get the best

@BushidoDevilDog 4 года назад

When it comes to getting quality gear, Buy once🤑💸, cry once😭...

@regwatson2017 4 года назад

Great review thanks - How hard would have been for Thrustmaster to have allowed you the option to remove the rubber pads and replace with a type of toothcomb cat's tongue style feet that should be included in the box for use on carpets ? For the price it should have been a no-brainer to include such a simple fix.

@psyrixx 4 года назад

Yeah, definitely an oversight on their part. Works great mounted to a piece of birch that is cut to fit against my wall and keep the pedals in the perfect spot though! Annoying that's the solution.

@PassportBrosBusinessClass 4 года назад

I just bought the Logitech Saitek Pro G pedals. I would have still bought them if I knew about these prior. These are more than 3 times the cost of my pedals. I do wish the pedals I brought had a stronger return to center.

@psyrixx 4 года назад

You gotta do what works best for your setup! :)

@TheMuricanMerc 4 года назад

What is that thing you have at the bottom of your Warthog stick? Looks like a relatively cheap way of center mounting your joystick.

@MozziMono 4 года назад

Nice review! But I have one question...are they confortable to use? I ask because I see the feet stand on the floor instead of on the pedals (like other PC rudder pedals).

@psyrixx 4 года назад

They are much more realistic to use, so in my opinion they're plenty comfortable! Also easier to push forward and plant a heel into the floor to hold a particular configuration whereas on the flatter pedals you have to keep your legs flexed in position.

@DownTheRabbit-Hole 5 лет назад

Curious how they match up to Redbird pedals?

@Aleksandar6ix 2 года назад

Yeah, I'm really stuck. The only other pedals I use are the VKB T-Rudder Mk-IV.....those are perfect for me save for the lack of toe brakes. I know these would be a cut above, but without the rest of the hardware (yoke, etc...) of equal quality it's kind of hard to take them on.

@jebb125 Год назад

Bought the TPR pedals, then a buddy brought his virpil ace over for me to use. Sold the TPR's as soon as the virpils showed up. No regrets.

@ryfocus7241 5 месяцев назад

How do you compare the Vipril Ace? New to fsim, and deciding between these two

@jebb125 5 месяцев назад

@ryfocus7241 the tpr were ok but I needed the mod that added the little shock to tighten them up as they were was too loose for my liking. I added another spring to the ace pedals and they have a better feel.

@MititeluRadu 6 лет назад

1:24 I have sn: 2484 and is the same design as your's. True mine didn't failed yet but I guess I need to look for a replacement before that happen. I was not aware of this issue.

@odinanarchyonline 6 лет назад

Mine are 0085, still work amazingly well. :) I'm not sure how did he break his MFG's. Btw, there is no comparison to VKB/Virpil designs. Additionally, IIRC, MFG's use hall sensors as well

@andresisthename 3 года назад

Is there a good online store to buy flight sim gear other than amazon?

@MixedRealitySimRacing 3 года назад

According to your shirt you will have a blast in Star Wars Squadrons tomorrow using them :-D

@psyrixx 3 года назад

I'm looking forward to it!! Does it have rudder support in the game though?

@MixedRealitySimRacing 3 года назад

@@psyrixx it has HOTAS support and everything is mappable. If it doesn't have a problem with two input devices at once it should work. Will try it later today

@MixedRealitySimRacing 3 года назад

@@psyrixx I've just tried it with the Thrustmaster Warthog HOTAS and Saitek Rudder Pedals and after a lot of fiddling around because of some dead zone issues it works really well and is a lot of fun in VR. The problem was that it puts a dead zone on the Joystics X and Y axis and the workaround is to use a thirdparty tool to change the axis to something else than X and Y. Super weird but works, if you need help I can send you a link I found on reddit.

@psyrixx 3 года назад

@@MixedRealitySimRacing Sweeet, I'm going to mess around with it a bit myself. Wouldn't hurt to post the reddit link here in case any other viewers come upon this thread!

@MixedRealitySimRacing 3 года назад

www.reddit.com/r/StarWarsSquadrons/comments/j3f31x/anyone_else_having_issues_with_massive_deadzone/g7dk288?context=3

@bluegreen5768 2 года назад

thanks for the video. are these compatible with the ThrustMaster T.16000M FCS Hotas.

@barrymcdonald7404 5 лет назад

Robert, are there attachment points anywhere on those pedals that work well with the wheel stand pro?

@psyrixx 5 лет назад

Not familiar with the wheel stand pro, but the pedals do have four mounting holes on the base.

@Commissarius 4 года назад

I am trying to find out if these would be compatible with the new Xbox coming out

@lowrivera Год назад

4 years later, price is the same. Picking these up today.

@psyrixx Год назад

Still using mine and absolutely love them. Solid piece of kit!

@panacea407 2 года назад

Hi there, came across this video and just wondering if this model is compatible with MSFS ‘20. I usually fly the 320 Airbus-Neo and am looking for as much realism as I can infuse into my sim. Thanks for any feedback or recommendations.

@psyrixx 2 года назад

Yep! These work very well with MSFS '20, X-Plane, DCS World, etc. 🙂

@marcdunivan2436 Месяц назад

Can these be connected to with a radio transmitter like RadioMaster Tx16S?

@AntonioPereira-lb5jq 4 года назад

X-Plane 11 recognizes my new TPR (easy to install) and asks for calibration process. Success . But when I start a flight I get a message telling the device recognized but functions are not assigned, so the device is not active until reset . Heeelp.

@mururoa7024 5 лет назад

Looks really appealing, I really like the metal and all, but damn, more than double the price of the MFG...

@bailey2624 5 лет назад

im so late to the party about these. they took forever to makes these and never fixed their broken hotas. my MFGs which might be 2nd gen are still like new

@douglasmichel6361 2 года назад

New to your channel, I use a 3/4” piece of plywood cut to (lay on floor) fit between back edge of pedals and wall…. They never move

@psyrixx 2 года назад

That's exactly my solution as well!

@luizengrazia5169 3 года назад

Thx! S2

@henrikolsen5 2 года назад

Are the pedals much wider apart than on a Cessna 152 or 172? Seems they are quite a distance apart from each other on the video, but might be hard to judge.

@psyrixx 2 года назад

They're a little wider apart, yes; however, in practice I honestly don't notice it.

@greenleaph5145 2 года назад

Has anyone tried this on the Xbox Series X complimented with the Thrustmaster Boeing Yoke ED?

@penknight8532 9 месяцев назад

Yes they are worth every penny!

@arcadealchemist 3 года назад

i took the plunge, right now i'm using a pedal for pressing CTRL >....< i just got this so i can strafe up and down and roll smooth might start using stick instead of keyboard this weekend for playing star citzien, just smaller flight ships the damn thing feels janky using keyboard even if i got analogue keys,

@maxxawesome7412 2 года назад

Hey there. I fly real word helicopters and tailwheel airplanes so I’m looking for something that would accurately simulate the real thing for hover and/or rudder realism for the Pitts landing or aerobatics. Have you flown taildraggers? If so how real do these seem? Have you tried them with the MSFS2020 Pitts?

@psyrixx 2 года назад

So as for how they operate they are the most realistic pedals I've tried. The one downside is they do not have a very realistic feeling amount of resistance although I'm sure you could adjust that with a different spring in the back. I don't have much taildragger experience (did some aerobatics training in a Citabria once) however these pedals operate very closely to the pedals in the C172s, C182, and M20J that I've flown several times. Apart from how "easy" the travel is they hit the mark in every other way.

@maxxawesome7412 2 года назад

@@psyrixx thanks

@mykey39 2 года назад

What is the height of the center base? Looks like about 13 inches?

@Windward90292 3 года назад

Do you happen to know if the TPR peddles will work on a Mac running XPlane?

@psyrixx 3 года назад

I don't see why they wouldn't yet I can give it a shot this evening and report back. :-)

@MrBoxxxed Год назад

What is the pedal end to pedal end width?

@mcdanielguinnthenorthernwa9110 4 года назад

Would this work on the PS4 thrust master

@Ozymandias1 3 года назад

Put a cheap rubber anti slide mat under the pedals. The ones people put under their doormats.

@sigbauer9782 Год назад

I'll just save you all the time...yes, these are completely worth it. I had a set for a brief while and damn I was impressed. But why take my word for it? Get a set from Amazon and try them out, and then return them, free of charge. I did.

@vito356a 3 года назад

HI ..DO THEY WORK WITH Apple Mac IOS CATALINA ..???? TANXX

@raymondnist8770 2 года назад

These also work on the Xbox. You need the Boeing yoke and throttle. Plug it into the throttle and it works!!!

@Thomas-Designs Год назад

Have you used this on msfs 2020 yet?

@mchaelmchaels3953 2 года назад

What kind of game is that please thanks.

@marshallallensmith 5 лет назад

I got these because they are much closer to the helo pedals which is what I fly most.

@psyrixx 5 лет назад

What are your thoughts? I'm still loving them, they feel very close to the real thing!

@marshallallensmith 5 лет назад

They are as smooth as silk which is very welcome over some of the other types I have tried and the action of the pendular style movement is what make these golden for me. Although they are not "identical" to the pedals in the Bell-412 or other skid mount helo the option of having the differential braking was sorda resposible for getting me interested in trying fixed-wing flight. So I can not really say how close they are to a irl fixed-wing aircraft because I have no experience there but for rotorcraft these pedals absolutely kill the competition. Compared to slider and axial rotating designs these are in another world. So yeah I am a fan lol and last but certainly not least is the fact that they seem to be pretty bullet-proof because I am really tough on hardware and have destroyed a lot of joysticks and throttles in my sim days but these things seem to hold up like they are fresh out of the box and that was also a surprise because usually, pedals are "sticky" when new then they slowly get broke in and smooth out until finally getting loose and innacurate but these were smooth right out of the box and amazingly still are.

@tribolex 4 года назад

i couldn´t set them up with DCS. I have no Idea what I am doing wrong? Its no plug and play

@psyrixx 4 года назад

Interesting, don't know why you're having issues. It's completely plug and play on my end. Do you see a column for them in the control configuration area?

@agreen778 4 года назад

Yes, dial in that rezoostance, lol

@dealwolfstriked272 6 лет назад

DUDE?!?!?!.......SOLD!! ;)

@noctivagant8724 5 лет назад

There is quite a price difference between MFG and TPR, MFG costs half of TPR and I must say MFG is doing quite a good job at that price tag. I find it quite unfair to compare it to a unit which costs double. Slaw Device or Baur's pedals would be a better comparison. About Warthog, while the stick itself is very good, plastic gimbal is a very disappointing choice by TM, they are known to crack and fail. When it comes to sensor and gimbal Virpil and VKB seems to do a much better job but again A-10 stick of TM is simply superior to anything else for my opinion. While I think TPR pedals are great, 500$ price tag is steep I prefer waiting the results of Baur&Virpil partnership to have more options.

@nexus888 2 года назад

In terms of the original sales price there is a big difference. But add to this the cost of sending the MFG and the difference becomes smaller. If I would buy the MFG + combat pedals + shipping to Australia the price wouldn’t be far from the TM TPR which I can buy in may shops here. Having said that I only wish MFG wasn’t so expensive to ship :)

@Sokol10 6 лет назад

6:47 TPR is bolted to this wood plank?

@psyrixx 6 лет назад

I have two screws in place that the steel base of the TPR is pushing against, but I didn't take the time to mount it properly. That is the same location (and screws, actually!) that I mounted my MFGs to the plank. My Warthog is attached with some ABS Plumbing Pipe (4" diameter) with a screw-off cap for a drain clean out so it can be removed and stored. I'll actually be putting together a video showing some mounting solutions for the TPR pedals for hardwood / carpet / full HOTAS MiniCockpit setups.

@Sokol10 6 лет назад

7:12 Curious because MFG use the same kind of HALL sensor (Melexis) than Thrustmaster.

@psyrixx 6 лет назад

That is strange because the MFGs never felt all that precise. Again, it might be due to the slight rotation or the fact that their drivers are only reporting ~4096 or whatever positions on each axis? These guys - lightest pressure results in different input, the MFGs I feel like I have to move a bit before anything happens, and by then it's already moved too much. AGAIN my MFG are first generation though! The newer Crosswinds (third gen) may well be better than what I've been working with.

@thebigdustin 6 лет назад

Can confirm, Crosswind's use Hall Effect sensors on all axis. Crosswinds are probably more accurate than the TPR pedals simply because they are wider. More leverage, longer throw, more precise. Just gotta get them really tuned to feel nice.

@psyrixx 6 лет назад

I didn't do much tuning with either set! I must have just gotten a bum release of MFGs or something, because they've always been "twitchy" - the firmware and configuration screens always have the axis "jumping" slightly even when I'm not putting in any input (ie: MFGs sitting there doing nothing with no feet on them) so I just assumed they were regular 'ole peripheral sensors (I'm a software guy, not a hardware guy, so forgive me if I sound like an idiot here). And AGAIN - I love my MFG Crosswinds, they saved me from the Saitek Pro Flight slider pedals. I've been using them for 5-6ish years. You wouldn't go wrong picking up a set of MFGs. Even with the "jittery-ness" my set feels really good. I can only imagine the Gen 3 pedals are that much better, which is why I specifically mention that I'm using Gen 1 in this video. The Thrustmasters do feel much more like a real world set of Cessna / Piper / DA40 rudder pedals - I've been flying those types of aircraft enough to say that without question. Is that worth the cost of the TPR? ...well, I did mention in the video that TM products tend to go on sale rather frequently... :-)

@Sokol10 6 лет назад

To by fair, MFG Crosswind of 1st generation use an less tech USB controller and contactless sensor (analog bus) than 2nd/3rd revisions, who start use MFG SIMM8Rge USB controller and Melexis HALL sensor (similar to used by Thrustmaster Warthog and Saitek X-55/56) in digital protocol. Probable the main factor for feel PR more precise than Crosswind is due the use with heels on floor, users of VKB T-Rudder has the same feel.

@psyrixx 6 лет назад

This is great information regarding the USB controller and analog sensors. I've never used the 2nd/3rd generation MFG pedals (and mentioned that in the video) and therefore have no idea how they feel in comparison.

@dakotafinney8152 4 года назад

Do you think these will work with the alpha flights controls honey comb yoke?

@psyrixx 4 года назад

Ex0 I currently use them with the Honeycomb Alpha

@dakotafinney8152 4 года назад

Robert Sogomonian Oh okay :) Thanks

@Bronwyn031 5 лет назад

😳😳😳 My Gawd!!! You could kill a man or a buffalo with those!!! Where can I buy them??? I've always wondered why TM never made a over engineered pedal system that could accompany my Warthog HOTAS. 💖💖💖

@psyrixx 5 лет назад

hahahaha, can confirm - have killed a man (virtually) with these. No buffalo in DCS yet. ;) amzn.to/2ABGoLU

@Bronwyn031 5 лет назад

@@psyrixx Watched your video and bought them. They arrive via UPS on Thursday 😊 I play Star Citizen with their Warthog HOTAS and the Saitek Combat Rudder pedals. However the toe brake wiring in the Saitek has started to short out from being old, highly used and just poorly engineered IMO. I will turn/machine down floor spikes outta some steel bar stock so I can use them on carpet without slippage. Thanks for the video 🤗

@Bronwyn031 5 лет назад

Amazon fired these out of a cannon, arrived yesterday. They are the finest pedals I've ever used. Built like a tank and so smooth actuating. app.box.com/s/l61ko3ttc7fcd9coz1ktbcsix5pgmvip

@psyrixx 5 лет назад

@@Bronwyn031 LOVE the slippers! Also - how'd you know Predator was one of my favorites?! Enjoy the pedals!

@kenbarthSimAV8tor 2 года назад

How possible is it to mount on a sim rig?

@psyrixx 2 года назад

Shouldn't be too difficult to mount on a sim rig... has four mounting holes and if you really need to you could mount a couple of pieces of wood to the sim rig and then use a couple of shorter lag bolts to secure this to the wood.

@FlaminSquirrel 6 лет назад

Could please comment on the operation of the brakes? Are they load cells, or just bog standard springs? Thanks.

@psyrixx 6 лет назад

Feel like springs, but I'll be seeing if I can take this beast apart and find out for you.

@robert48tube 5 лет назад

PS....in UK on EBay £490 !!!! Game Set & Match to MFG !

@damoneblackman1702 4 года назад

Anyone know if these are compatible with my saitek flight yoke?

@psyrixx 4 года назад

They 100% are compatible with your Saitek yoke.

@damoneblackman1702 4 года назад

@@psyrixx thank you!

@animatedchristmascollector3754 Год назад

They’re be compatible with anything. It’s funny how you have the best top of the line rudder but you have the worst yoke on the market. Lol

@yukin1990 5 лет назад

What material they are using ??

@psyrixx 5 лет назад

Aluminum

@l0rdcroissant 2 года назад

wow they are monsters! lol, like someone ripped them out of an actual plane. XD sadly they are far more... a lot more than I can afford or justify right now, HOWEVER lets see what next year will be like :)