Thrustmaster Steering Wheel Off Center Repair - How to Fix 

I'm glad it helped

Hi, how many millimeters is the elastic band?

I have the same wheel. Removed the cord 2 weeks ago. It's around 20-30cm. Do you need exact measure?

@@JohnDoe-ex8gf hello thanks for answering I don't need the length just the circumference or thickness

Check if you can calibrate the sensitivity in game. I also suggest to try in Windows on a Laptop or PC, good luck 🍀

What kind of steering wheel

There must be a contact problem inside the cylinder, have you tried what is in the video?

yo sorry to revive after a year but did you end up finding a solution

@@DR_OF_SHADOWS I did and it has been working fine since then. Do you have a T300 wheelbase?

@@mineiromotorsport yeah

@@DR_OF_SHADOWS Ok, well first, check if the bracket on the back of the electric motor that holds the small board with the Hall sensor is not broken. Then check if the board with the Hall sensor sits parallel to the motor/bracket. Mine didnt, so I unscrewed the 2 bolts holding the board on that bracket and also took off the bracket from the motor. Grinded the side of the bracket that was lifting the board until the board was completely parallel to the brackt and thats it. That solved the issue for me. Now the Hall sensor is closer to the motor and doesnt lose connection to the motor's position. If you need pictures to better understand what I mean, let me know.

Try to do the same thing, but if there's a different model you have adapt. I was in Control Panel in Windows, you can use any laptop with Windows for testing. That also works for almost any steering wheel or controller

I have the exact same issue

What he did was he loosened his cords up to where they have play so that way it’s not adding a lot of tension onto the cords so what he did was put a zip tie between the bracket and the cords to hold them up so they’re not shorting out because that’s mostly what his problem was was his cords was shorting out and that’s what it called the disconnection

Xd me too😂

Sorry, I can't help with that

At a point it will break, however, I think that would take hundreds, maybe thousands of hours of gameplay

@@YesterdaysTech ok thanks👍

Try to stretch the cables, most probably there's a connection problem

I’m having the same problem in iracing it jumps back and forth did you get it fixed?

@@spinningourgears2171 no I didn't manage to. When I opened it up I first realised how cheaply made the whole thing is and then saw that the sensors seems to be working fine. It's probably a software error

I don’t think so 🤔

There are multiple possible issues. Did you buy it as new? Have you installed the driver?

@@YesterdaysTech second hand as I needed the clamp of the wheel.

Make sure the driver is properly installed, otherwise try what is shown in the video.

Yes, you can try that

I tried that it didn’t work I actually can’t understand what u did by removing the black cover for the wire and zip tieing it

Yes, replacing the elastic cord with a less strong cord

I don't think so

What game is it for?

I think it is an in game setting

Depending on the game