Тёмный

Tiller Gearbox Trouble 

FerdinandMagellan08
Подписаться 12 тыс.
Просмотров 42 тыс.
50% 1

I think I need to rebuild the tiller's gearbox.

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@fredhart5033
@fredhart5033 6 лет назад
I put my old tiller back together new seals, but they would not hold oil, Thing to do is fill the gearbox with axle grease, they will last forever, Also you can fill a leaking gearbox that will not hold oil on a hayrake or bush hog, Hard to believe but the grease keeps them working if you can not rebuild and keep oil in them Others have even filled old tractor manual steering boxes with grease Glad you have it running, I have done that job before, old tiller still running after all these years, built in early 70’s,
@fredhart5033
@fredhart5033 5 лет назад
I have an old tiller just like it, put a new gear in it, new seals etc Then fill gearbox with grease and let her run, You might get by with John Deere corn head grease, if you are not familiar with this lubricant it is a far superior lube to reg gear oil, Plus it’s stays very thick and will not run out as fast, But cheap and dirty is just fill gearbox with axle grease and let her rip, if it will not hold regular gear oil,
@gregorymalchuk272
@gregorymalchuk272 Месяц назад
Did you ever find a replacement gear for this tiller worm drive? If you did, I would refill it with an NGLI 0 or 00 grease so that you don't have to worry about leaks as much again.
@gregorymalchuk272
@gregorymalchuk272 Месяц назад
I also just discovered from an old owners manual from a similar unit that that castellated nut on the gearbox actually is a castellated nut like on cars. It sets the bearing preload on the worm tapered roller bearing. You set it just like an old car, tighten it until it clicks, and back it off one click, and put the cotter pin in.
@peteharrison9816
@peteharrison9816 4 года назад
Well when you gonna have video on repair it
@morningstargardens
@morningstargardens 7 лет назад
Thank you for the video now i no what is wrong with my drive.
@stevestpierre4685
@stevestpierre4685 2 года назад
Would love to know how you removed the shaft and gear. Did you just pound it out ? I noticed your sledge hammer on the side that's why I ask. I am doing the same with mine. I have removed the ring nut but I don't want to start hammering on the one side of the shaft to remove it if that's not what you are to do. would like to know, thank you
@skylershawnmay13
@skylershawnmay13 6 лет назад
Would've been nice if you would've shown how you took it apart
@FerdinandMagellan08
@FerdinandMagellan08 6 лет назад
Sorry. I wish I still had it to make another video. I've since learned a lot and gained a lot in making videos. I know it doesn't help in this case but it does for the future.
@wulfclaw4921
@wulfclaw4921 5 лет назад
I think I have to split.the case on mine. Its stuck un gear with no intentions of doin anything but bein stuck. It's an old Montgomery ward (Briggs & Stratton) I believe.
@nicolastorres3259
@nicolastorres3259 7 лет назад
do you know what size are the belts please. Thank you.
@NeverStop67
@NeverStop67 8 лет назад
Did you ever find a gear for this project?.... I'm in need of the same gear...
@NeverStop67
@NeverStop67 8 лет назад
I found a run down tiller and robbed the parts to make it work.... I found it at a shady tree mower shop...
@jfenn1124
@jfenn1124 3 года назад
gilsonsnowblowers dot com has new bronze gears. They sell Gilson tiller parts. The gear is by far the most expensive part to replace.
@Michael-nx7im
@Michael-nx7im 10 лет назад
WHAT YEAR IS YOUR TILLER? INEED PARTS MANUAL
@madisonelectronic
@madisonelectronic 9 лет назад
Michael Ramer Still need that parts list? Mine is a Dayton Model 3Z471B and is almost identical.
@MarvinLStohs
@MarvinLStohs 7 лет назад
Nothing like putting some gear oil in it every once in a while
@FerdinandMagellan08
@FerdinandMagellan08 7 лет назад
This was how I got it. When I got it the gearbox was already beyond repair.
@David-ll8bt
@David-ll8bt 6 лет назад
It was used too much when it was new.
@c10fan67to72
@c10fan67to72 9 лет назад
I have parts for this one.
@richjurgens5077
@richjurgens5077 6 лет назад
Do you still have the 3 shave puppy that goes on the shaft of the motod? What's the ska ever of the shaft? I need one with a 3/4 i . Goes
@richjurgens5077
@richjurgens5077 6 лет назад
Pulley not puppy!
@johnmccullough8856
@johnmccullough8856 6 лет назад
Visit gilsonsnowblowers.com they have most the parts you need worm wheel seals felts etc
@infringinator
@infringinator 12 лет назад
nice video sucks the teeth are all tore up
Далее
How I Fixed an MTD Rear Tine Tiller Gearbox!
23:41
Просмотров 23 тыс.
А ВЫ ЛЮБИТЕ ШКОЛУ?? #shorts
00:20
Просмотров 1,6 млн
Monkey Wards Tiller.avi
5:33
Просмотров 38 тыс.
Unsticking a Stuck Bulldozer Clutch
30:43
Просмотров 54 тыс.
Operating a Front Tine Tiller
7:25
Просмотров 104 тыс.
craftsmen rototiller repair
5:59
Просмотров 105 тыс.
1of 2 MTD Roto-Tiller
9:21
Просмотров 72 тыс.