TimeSert Vs Helicoil | Where do I use a Timesert | Where do I use a Helicoil | Highland Cycles

Подписаться 41 тыс.

Просмотров 13 тыс.

50% 1

Where is it best to use a Helicoil? Where is it best to use a Timesert?
Join Our Crew : bit.ly/2SHy1Fk
Want to buy me a coffee www.buymeacoff...
Want to support us and save money?
www.leadingedg... Use code “highland"
extreme-parts.... Use code "highland10"
veemototires.com/ Use code “highland"
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing....
xcgear.com/mak...
www.2strokehea...
nitromousse.com/
www.systemtech...
ddcracing.net/
enduroeng.com/
bulletproofdes...
www.evanscoola...
www.wlfenduro....
extreme-parts....
veemototires.com/

Опубликовано:

25 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@rob.granger Год назад

Thanks! Good Info...especially since my motto is: Breaking more things by 8:00 AM than most people break all day.

@highlandcycles Год назад

Hahahaha

@andrewballantine Год назад

You might want to look at EZ-LOK metal cores. I chose them to do a blind hole in a cast iron engine block because no special tools are needed. The outside thread is a common size so an ordinary tap and drill is all that is required plus a large flat blade screw driver to insert the core. The cores are about $2-3 each depending on size and you can buy them individually. Because I am doing a blind hole I also bought a bottom tap ( that’s a tap that threads almost to the bottom of a blind hole) as the hole is rather shallow. A helicoil presents a problem because it is almost impossible to break the tang at the bottom of a shallow hole. My rule of thumb; through hole = helicoil, blond hole = EZ-LOK. Hope that helps.

@highlandcycles Год назад

Cool

@StevenSegura-z6q Год назад

Just finding this video, and thank you for this! Previous owner of my Polaris Ranger cross threaded and stripped out the trans drain plug. Trying to find a time sert has been difficult, but at least I know Im going in the right direction!

@keithmcqueen7666 Год назад

Thanks for the crooked thumb warning 🤣

@highlandcycles Год назад

Hahahaha

@wfo_racer Год назад

Everything seems to have a name Lerreta Daisy and now your thumb, which is way cool btw 🤟, and now "The Craw" thumb. Merry Christmas Buddy

@joelcowdreyiii6745 Год назад

I ran a main propulsion plant on a U.S. Navy frigate back in the day. My boss, the Chief Engineer, had both little toes curl up and inward over the tops of his feet and also had both of his nipples pierced with little tiny barbells. He had a habit of calling us engineering officers into his stateroom for a conference before the start of the day. When he didn’t have socks or a shirt on we’d all start singing “Under the Big Top” circus music at him. Good times.

@highlandcycles Год назад

@@wfo_racer gahahah

@highlandcycles Год назад

@@joelcowdreyiii6745 bwahahaha

@ChrisBurns1119 Год назад

Awesome. I never knew this exactly the way it is. Had a buddy get a 400ex awhile back and. Spark plug hole ended up being helicoiled and it was mess lol

@thatfast3002 Год назад

Good video, I've done many helicoil repairs but didn't know much about time cert but I've heard the name thrown around

@SeatTime 7 месяцев назад

Thank god, a short video!!!

@highlandcycles 7 месяцев назад

🤣😂

@zachfarkash6430 Год назад

Thanks for sharing the info I did not know the difference between the two. 🤘

@highlandcycles Год назад

Awesome

@2strokelover93 Год назад

Morgan , you da sheet!❤ thx for this

@lakefrontshorthairs 22 дня назад

How do you helicoil the deep M6 55mm long bolts on a ktm clutch cover?

@charliekohn4271 Год назад

Threadsert marks thin wall versions that are barely bigger than helicoils. I've scene a lot of stripped 50 and 65 plug holes. I'm tempted to threadsert them for the ham fisted dads when I get them as a courtesy.

@highlandcycles Год назад

Totally

@garyredmond1890 Год назад

Really helpful video. For sump plug application, do you grind down the TimeSert so that it doesn't protrude too much into the sump? Not from the perspective of the sert coming into contact with any moving parts, but to allow oil to drain fully on future oil changes. Thank you.

@highlandcycles Год назад

I do.

@ALDA2479 Год назад

TimeSert are sweet I been running them a while now and have never had a issue HeliCoil is nice convenient and cheap but if stripped shit is something u deal with often invest in a timesert kit money well spent

@highlandcycles Год назад

Totally

@equipdoctor9583 Год назад

Are you sure the time-cert makes a larger hole? Seems the other way around to me but I’ve been wrong before

@highlandcycles Год назад

Not 100% but it seems like it’s more material so it would need to

@janetarzan4294 4 месяца назад

Are helicoils good for timing chain guide rail bolt holes( M6-1.0 )? I stripped one out 😥And thank you for your video ☺️☺️☺️

@highlandcycles 4 месяца назад

Yeah

@daveco1270 Год назад

About 2 years ago I had a local mechanic repair some spark plug threads on my vintage bike and he used a helicoil. I'm not sure why he didn't use a time sert. He's a very capable mechanic who's been doing this for a long time. If I had known he was going to use a helicoil I would have suggested the time-sert and even bought the kit myself if needed. Honestly, I'm a little annoyed by the whole thing, wondering if I can remove the helicoil and put a time-sert in it's place. Next time I'll do it myself.

@highlandcycles Год назад

You can remove them

@Nic-ho1rq Год назад

I have a stripped oil check bolt on my 22’ 300. I plan to fix with a helicoil. How do you prevent metal shavings from going into the motor when installing a helicoil?

@seannichols7966 Год назад

Put grease on the tap

@highlandcycles Год назад

Like Sean Said, put grease on the tap. Or, take the cover off, do it on the bench and replace. I just did a video of me doing exactly that.

@-MrRichBiker1967 Год назад

@@highlandcycles He said, he wants to do the job ON THE BIKE!!!!! Did you read the comment???????

@highlandcycles Год назад

@@-MrRichBiker1967 I did and I’m telling him not to

@diggs345lr Год назад

Timesert are great but expensive for a kit in the UK .

@bobbyratliff3349 Год назад

If you put some loctite on the helicoil they don’t budge or I’ve never had one come back out

@highlandcycles Год назад

I have done that but you have to be very careful not to put too much on. I have seen it secure the bolt to the helicoil

@bobbyratliff3349 Год назад

@@highlandcycles i always coat the bolt with a little oil or leave the bolt out for a few hours and let the loctite setup between the helicoil and the item being fixed

@TheChaz81 11 месяцев назад

What about if some asshole stripped the spark plug hole so much that the spark plug doesn't grab. Like put a 12mm plug in a 10mm hole??

@highlandcycles 11 месяцев назад

Oh no. They make special kits for that

@TheChaz81 11 месяцев назад

@@highlandcycles so contact time sert directly? I got an 86 XR80 that the previous owners grandkids bashed on. The 10mm ngk cr7hsa just falls in the hole. Looks like the hole is almost 14mm. A used head is the same price as a time sert kit it looks like.

@richardhartley1705 Год назад

👍👍

@MitchOfCanada Год назад

imma donate $5 for some nail clippers

@scootypuffjr. Год назад

Keenserts

@TWOTASTYTESTICLES 27 дней назад

Yeah great vid. I own a 2007 pig. Two right side valve cover bolts stripped. Dealer says timeserts are better. Nope. Right to repair is righteous. The penis shaped bolt hole would be last resort I’d do for bike had 100,000 miles on it and was selling. Heli coils are the shit for 6mmx1.00 cheap ass pig casings.i hate spell check. I hate computers. Get out and ride free. Selling my pig. NEXT BIKE IS A DONKEY!

@kevintribbey4313 Год назад

you only use heli coil when you hate yourself.

@highlandcycles Год назад

Hahahaha

@mt1885 Год назад

and don't forget people loading them up with red loctite and 'hammering' the 6mm in

@highlandcycles Год назад

@@mt1885 ugh

@rebekahfrench5747 Год назад

Loctite and a helicoil is by far cheaper and can be re done if fails.. most failures occur from being over stressed.. clowns shouldn't own tools..

@ChrisBurns1119 Год назад

Hey Morgan what is your email? Or a way I can send you a pic of something

@highlandcycles Год назад

Morgan@highland-cycles.com

@wfo_racer Год назад

Your thumb? 👍

@lakefrontshorthairs 22 дня назад

How do you helicoil the deep M6 55mm long bolts on a ktm clutch cover?

@highlandcycles 22 дня назад

Take the cover off

@lakefrontshorthairs 22 дня назад

Do you mean I have to remove the inner clutch case to access it? Can I tap the whole length of the bolt hole and just insert the helicoil all the way down until it bottoms out? Do I need to stack the helicoils so that there are maybe two?

@highlandcycles 22 дня назад

@@lakefrontshorthairs no, take it all the way apart