Tiny Whoop Battery Chargers | ISDT Newbeedrone URUAV

Подписаться 336 тыс.

Просмотров 46 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I'm reviewing three new Tiny Whoop battery chargers from ISDT, Newbeedrone, and URUAV. How much is there really to say about a Whoop charger anyway? You plug it in and it charges your packs. Well, it turns out it's not necessarily that simple...
-- PRODUCT LINKS --
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Purchase the ISDT UC4 at:
* Banggood - bit.ly/2N5Iad7
* Amazon - amzn.to/2Bw22kT
Purchase the ISDT UC1 at:
* Banggood - bit.ly/2N3YjzB
Purchase the Nectar Injector at:
* Newbeedrone - bit.ly/2N3Wy5t
* Amazon - amzn.to/2EbwKBJ
Purchase the URUAV 6-in-1 Pro at:
* Banggood - bit.ly/2N62uej
Purchase the URUAV UR65 at:
* Banggood - bit.ly/2N6AIyy
* Amazon - amzn.to/2IcsfLp
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Most or all links above are affiliate links, and I will receive compensation if you use them.

Опубликовано:

12 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 211

@RcReviewsLt 5 лет назад

Hey, ISDT is not HV! well maybe they will release new FW (if it can be updated via USB C)

@JoshuaBardwell 5 лет назад

If that is true, then I cannot believe I missed that. I guess I didn't even think to check if a charger today didn't support HV.

@3v1Bunny 5 лет назад

@@JoshuaBardwell think Nick did a review on that isdt and yes ... it is none HV which in his opinion makes it odd that they released it in the current meta and not useful :(

@Zverokot 5 лет назад

this is not possible in this edition (hardware limitation). Isdt will soon make another version with LiHV support, so that you spend another 20 bucks. Say thank you to Joshua for not warning you about this. Great job JB (no).

@MikeAarset 5 лет назад

@@Zverokot I say Thank You JB! Great Job. Great Review (yes)

@peregrineflow7354 5 лет назад

@@JoshuaBardwell I have an AOKoda that I ordered assuming it had HV lol details. Solid charger so far though. So stellar that this medium supports updates eh? The design of the ISDT appeals to me but it lacks other features as well. Every one of these chargers has an upside.

@tbiowa9977 5 лет назад

Great video Joshua. Love your videos. You have a very easy going, relaxed, non hurried way about you.You cover every detail and question I have about a product unlike other videos that rush through everything and leave out a lot. Keep up the good work. I have subscribed.

@nemesisfpv440 5 лет назад

i know this is off topic for this video but i just got the "r9m and mm receiver combo" and could really use a know it all video! thanx for every thing you do. even this content is great!

@DJDevine 3 года назад

Merry Christmas 🎄 I have a URUAV 1s arriving tomorrow🤞 My Happy model charger has served its purpose but it is done to a certain extent after 2 and a half years👍 it came with my mobula7

@kristof007 2 года назад

A lot of chargers are discontinued while the Nectar is in stock so I'm going with that. I have a 5V charging bricks and also a power bank so it'll be fun to take outside too. Thanks for the thorough review, Joshua!

@Pile_of_carbon 5 лет назад

I really like the uruav/happymodel six channel charger. I got one with my Ur65. At first I was a bit skeptical, but it's really good. A friend and I tend to race whoops in the weekends and we just keep it plugged in and cycle batteries like nobody's business. I especially like that it has several input connectors so you're almost guaranteed to have _something_ that'll supply the juice.

@danemartin5288 5 лет назад

Right on Josh! I got the happy models because it does 6 at a time so me and the guys can keep rotating out several batteries.

@DS-xv1cg 5 лет назад

Thank you. I've been wondering which 1s charger to get. This video helps me make a decision

@GibStud 3 года назад

Just ordered the ISDT’s. Thanks for the info!

@dwilki1174 3 года назад

Quick question, how are you powering the UC1?

@natemanafter 5 лет назад

The nectar injector is my favorite. It’s small and fast. I usually have a couple usb power banks in my back anyway, so it’s perfect. I picked up a second injector and now I can fly forever.

@k6lsn 5 лет назад

Same here :)

@simonp1317 5 лет назад

I was just looking this up today and checking out the tiny whoop charging storage boxes

@slartibartphast7160 5 лет назад

The happy is the best has xt60 and barrel connector. Displays voltages and charges usb out also. The simplicity of slide switches is actually brilliant.

@CesarAnton 5 лет назад

Great video, thanks. I'll go for the URUAV 6-in-1 Pro

@KingFPV 5 лет назад

Yasss Right as I am getting right back into TinyWhoopin since I got those Deuce Moose motors! Ok shutting up & watching...

@KingFPV 5 лет назад

Ok so i like the happytime one or w/e it was labeled but a JB branded charger akin to your parallel charge board would be instantly in my household. Maybe 2.

@StealthFPV 5 лет назад

"Even if they do pop off" 😂🤣 5:25 sounds like some street words ahahaha love ya JB that was GOLD man lmao.....

@Stefan_73 5 лет назад

Great that you start to care about the topic. How do charge times compare. We all know that differs heavily for large chargers even if they quote the same current. Do chargers charge to the right voltage? - The simpler Uruav tends to overcharge to 4.37-4.39V in my experience. I am missing the classical JB technical details ;-)

@Stefan_73 5 лет назад

@@YoUrEDeStiNy Well, it is not. 4.39V will on the longer run harm your HV lipos. And charging times may differ.

@PowerScissor 5 лет назад

What a time to be in the hobby. I can't believe the charger you can buy for $15 and you don't even have to parallel off it. Super cheap chargers blow away my hundreds of dollars chargers from just 8 years ago.

@colddash5598 5 лет назад

I just got a BOLD CLASH PO1 WHOOPOWER I LOVE IT, highly recommended

@rickinjax2330 5 лет назад

I find that the URUAV charger overstates the current battery voltage, charges at a higher rate that your setting, and finishes HV batteries at less than 4.35v (which at least is better than overcharging). It also lacks a audio indication when charging is complete, so you need to check whether the battery icon is blinking. My preferred charger is the Ultra Power UP-S6AC, which has the power supply built in, has all four battery type inputs, charges six at a time, beeps (rather loudly) when charging is complete, along with bright LEDs, and cycles thru four values, showing all six batteries at once. It displays charge type (reg vs. HV), current voltage, charge m-amps, and total m-amps added. It also includes a separate XT60 input for field charging. However, the URUAV beats it in two categories, it's smaller (although that depends on the size of your power brick), and it displays all of it's information at once, so you don't need to wait for it to cycle through the different options. Still, for me, the UP-S6AC is the best of the current crop. The big thing that is missing from all of these is an option to charge/discharge to a storage charge.

@gonebdg 5 лет назад

Great review as always ... But you forget Aokoda CX405 which i think a good one and had different shape which is very simple. i'm always get the same voltage at full charge. (LiHV & Lipo) . The only cons. is no fast charging option. Max. 500mAh per slot, so when i charge 4 batt >=450mah it tooks more than 50minutes :D

@MrJarrod 5 лет назад

Thanks JB

@tweakohgy4471 3 года назад

Josh I justbprdered a AcroBee should I cuz off the connector for the bt 2.0 connector I already have a spare and batts I wouldn't need to get more. I just dont want to lose power or flight time

@jlarson42 5 лет назад

I use the eachine branded 6 port charger, like the Happymodel charger. Works very well . And i like that can use either an xt60 lipo adapter or a wall adapter. Happy flying :-)

@woj1999 5 лет назад

My 6 in 1 charger from amazon actualy came with 6 converter cables from PH 2.0 to JST /Micro-Losi. Why there is no storage charge/discharge? I thought the smart menu driven URAV one would have this feature.

@peregrineflow7354 5 лет назад

I just ordered the Nectar Injector. Comes with the ubiquitous USB 2 and a good 2A cable. Each port has its own processor and I needed HV. I don't love the design but it's NewBeeDrone

@LudoVicious72 5 лет назад

So when, WHEN, do we see a 6in1 1s storage voltage charger?

@CaptainSloose 5 лет назад

The mobula 7 price performance ratio while including a badass charger is really damned hard to beat. JB how bout a head to head as best as possible, MCPX vs JST vs XT30s on the mobula?

@CarbonGlassMan 4 года назад

So charge the tinyhawk 1s batteries with the switch in the .2 or the .6 position? 4.20 or 4.35 position on the other switch? I'd rather have long battery life.

@MrBMWerner 5 лет назад

How do you storage your 1s lipos? Full? Empty? Storage? is there a storage mode on tha chargers?

@MrBrettStar 5 лет назад

You had me at JST, I’ve just started having trouble with PH connectors and the JST seem much better.

@AnasSuhaimi 3 года назад

JST is the company, PH is the product line by JST. There are JST PH, SH, XH, SD, etc.

@XtianApi 4 года назад

Does the quick charge adapter prevent overdischarge? I have that rectangle one with the simple three digit display and it toasted my lipo to zero volts. Thanks

@JerryCalverley 5 лет назад

Very good review.

@codygay3412 5 лет назад

Very sweet, so only one of them are compatible with the old molex style connector that maybe the Bwhoops still use?

@illpro2 5 лет назад

I got the URUAV version of that Happymodel charger with my UR65 and it charges great. I do notice that the on screen voltage display is wrong most the time.

@Pouncer9000 5 лет назад

Thanks for the review Joshua, I didn't know about the URUAV charger. I think you kinda breezed by its main selling point, but for people like me with a bunch of Molex, mCPX, mCX and JST batteries and their generally awful dedicated one cell chargers this is a godsend. That's a good half dozen going into the recycling bin now, good riddance. Ordering one now via your link, thanks!

@jpsalis 3 года назад

I got a happymodel charger with my mobulus 7, not disappointed at all. I used to use my Spektrum 1s charger, but it doesn't allow you to charge to 4.35v, and there is no amperage control for each channel. However, I can check a battery's voltage so much faster, and it doesn't display voltage for channels without a battery connected.

@VincentFischer 5 лет назад

I have the URUAV one since 2months but under the 'Rcharlence' label from aliexpress (menuscreen looks a bit different though). Very decent Smart charger that charges up to 1000mA per channel, just missing storage voltage option. Also its USB out supports Quickcharge which is just awesome (charges my phone with 2A instead the legacy 500mA adapters) which the other toy chargers don't have. It replaces yet another device I have to carry to the flying field. In my opinion a nobrainer for the price.

@MBrulla 5 лет назад

When Nectar Injector first came out it was $10. :-) So worth it.

@BTerra01 5 лет назад

I think you forgot a very important feature that the ISDT does NOT support HV?

@renzevenir4853 5 лет назад

You mean, _"fuck my lipo lifespan for a bit of performance increase"_ mode?

@marcogarcia9307 5 лет назад

Really?

@BTerra01 5 лет назад

@@renzevenir4853 how much of the lifespan is decreased from HV charging?

@renzevenir4853 5 лет назад

_"Most Li-ions charge to 4.20V/cell, and every reduction in peak charge voltage of 0.10V/cell is said to double the cycle life. For example, a lithium-ion cell charged to 4.20V/cell typically delivers 300-500 cycles. If charged to only 4.10V/cell, the life can be prolonged to 600-1,000 cycles; 4.0V/cell should deliver 1,200-2,000 and 3.90V/cell should provide 2,400-4,000 cycles."_ The opposite happens when you charge lithium above 4.2V in an exponential curve. batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries

@jakob4644 4 года назад

Do you need to buy a cable as well for the URUAV UR65 charger?

@heathholcomb617 5 лет назад

I’ve seen some reviews mention that the ISDT UC4 doesn’t support LiHV, and the product listings seem to bear that out. If true, seems like a total deal breaker.

@Mjrfugnazzofpv5607 5 лет назад

A little while back you reviewed the m8 rctoolkit. It supposedly charges 1s-8s. I do know it is one output. But how would you charge batteries with the m8? I can’t seem to get it to accept it to charge. I do have the Happymodel version and it charges batteries exceptionally well.

@1214Nunez 5 лет назад

Finally the first to watch and comment. Lol... Love your videos..!!!

@3rdPedalMedia 3 года назад

is the URUAV UR65 mCX port the same as whats on like the indutrix FPV?

@beefge 4 года назад

Can I use my B6 charger instead of plugging in am XT60 connector battery to the URUAV?

@LJT9393 5 лет назад

I ordered the Mobula 7 standard edition and it comes with that 6 way battery charger the happymodel one but it doesn’t come with a DC cord for it. Can I just use any 12V DC wall cable will work fine to charge the standard batteries that come with mobula 7?

@bullpridez 5 лет назад

Probably worth mentioning the happy model charger comes with the mobula and maybe others.

@archer4922 5 лет назад

Any way to check and see if a tw battery is bad? Mine all charge up but my little whoop won’t fly, like it’s not getting enough power even tho the battery shows 4.2v. I’m thinking it’s either the batteries or the motors.

@ohgeez9971 5 лет назад

An important thing to note about the HappyModel charger is that there's no low voltage protection for whatever battery you're using on the XT60 connector to charge your 1s lipos. I almost killed a new 4s because of this. Now I only use a plug. It doesn't come with a plug, but luckily I had a compatible one laying around. There's a charger on tinywhoop.com that's similar (BetaFPV), but supposedly has the low voltage protection. It's $25 though.

@SirPoonga 5 лет назад

I really like the Strix charger. XT60, small, and with the Strix Hanger a great way to transport your tiny whoop with charger and batteries. The hanger isn't good for 75mm class though.

@filiped7298 5 лет назад

How about the betfpv 6-way charger? I'm using it right now and seems OK. I also got the AC to XT60 adaptor, which works fine.

@kanenstuff 5 лет назад

I find on the happymodel charger port 1 always over charges and will not stop and i have 2 both are the same but i just monitor it and great for the feild or discharging some 4s packs if its wet and indoor flying is the only way to get stick time

@patrixfpv 5 лет назад

I'm gonna learn something today, again :)

@chrismccart173 5 лет назад

Maybe a stupid question, but what do you typically use for your XT-60 input on these little guys? Could I run it straight to my converted server power supply?

@abenaj02 4 года назад

Hi. Super noob question here. What charger do you recommend to charge the 3s and 4s batteries for a small whoop type quad like the betafpv 85x hd ? Thanks in advance and thanks for the video!

@wrstew1272 5 лет назад

As am I,he's concise and informative.

@The2xWhiskey 2 года назад

The mCX connectors on the URUAV 6 in 1 are wired in reverse polarity.

@ohgeez9971 5 лет назад

How about doing a 1s battery round-up? When I started flying I couldn't figure out why my Tiny Whoop barely flew. People told me to upgrade the connector and the motors. What made the biggest difference was just getting good batteries. But, which ones are the best bang for your buck?

@Googletrash9383 2 года назад

Would these recommendations still stand in 2022? Just getting into FPV and hoping to pick up a charger capable of charging a handful of batteries at once.

@vaguedirector_7342 5 лет назад

And none of them are capable of storage charging. :( That's all I want in a 1S charger. So far I've been using a parallel board with my ISDT Q6 but that's not ideal since it requires additional hardware.

@littlemissskyhigh9606 5 лет назад

My uruav charger isn't able to give a good read out when using the mCX ports. Haven't tried molex or jst ports yet. All the common MCPX ports do work, but give total different read out then my 1s lipo checker and also a different read out the "happymodel" type charger that came with my US65. Still want to do a check with multimeter and see which gives the most honest read out

@thirtythreeeyes8624 5 лет назад

I charge all my 1s at 2c when I don't mind waiting and 4c when I'm out flying if I want to recharge them which considering I can fit 10+ batteries in my pocket and they're super cheap isn't very often unless I plan on flying for hours non-stop. The 4c charge doesn't seem to shorten the life of the battery by any noticeable amount I get about 2 years out of them on average before I start to notice degradation. I only charge to 4.25 though not 4.35 as the high voltage will shorten the life far more than a high charge rate, these batteries are all rated at 5c charge at least for the decent ones. 4.25 is slightly high voltage but, I've been doing it for years and it seems to have no real affect on the life.

@arlopilley7649 3 года назад

Had the Happymodel charger because it came with the Mobula 7, was working fine until maybe the 5th use when it blew up randomly and started smoking and died! So not sure if I could recommend especially when it costs as much as other much better chargers!

@mp1404_ 3 года назад

This exact thing happened to me today with a totally fresh one, it started immediately to smoke when I first plugged it in

@atlanticwoodsman8347 5 лет назад

Thank-you

@johnbigboote7954 5 лет назад

I like the Strix HV charger too

@dwilki1174 3 года назад

Newbie here. What is the xt60 on the UC1 plugged in to? A wall fed PSU?

@mikea2833 5 лет назад

I just ordered an Ultra Power 4 port 1s 2s charger yesterday, been nice to see that one. What about performance? I currently have the simple switch model and my batteries never come out the same voltage. They always come out somewhere between 4 and 4.2. Not consistant at all. It would have been nice to see how these chargers compare in that matter. I know it's a simple 1s charger and we are not going to the moon though.

@btbplanevids 5 лет назад

The generic 'board' chargers like the Happymodel have one big issue - they will flatten whatever Lipo you plug into the XT60 if you're not very careful - I had a pack taken down to 2V per cell :-( I also found I got slightly longer flight times when I switched to 'better chargers' like the UP-S6AC (my current favourite), so I'm not sure they actually charge that well either. Having mAh displayed on the charger is very handy for keeping a general eye on your Lipos, and also calibrating the real or virtual current sensor on your quad - I really like having mAh on the OSD. I also personally prefer having AC input as an option as I rarely fly where there's no mains socket available.

@lorynzo 4 года назад

hi! i have a happymodel 6in1, can i charge different mAh lipos?

@hoskoau 5 лет назад

Would have liked to see the Ultra Power UP-S6AC Charger, a 6 lane 1s AC/DC charger and the Ultra Power UP-S4AC Charger, a 4 lane 1s/2s AC/DC charger included as I own both and think they are the best option for charging tiny whoop/small quads that take a 2s battery. They both can charge HV and up to 1amp per lane.

@parker1ray 3 года назад

Accidentally left one like the Happy Model on over night, and it puffed all six batteries. No full charge cutoff. The URAV charger is a pain. You have to set all batteries to HV every time, also only charges 5 batteries at a time not 6. I use a Turnigy Accucel-6 with multi charging board.

@V1ZFN 5 лет назад

Thanks for the review, however I smell a JB whoop charger coming very soon at the nearest quad store.

@MohAwad-mw2oz 4 года назад

Hi, again good helpfull revieuw, thank you Joshua, can you pls tell me what type Board *Fuse* i need for ISDT D2 Dual Charger? My second part dont charge anymore..need to change the Fuse..is it 15Amp..20Amp..30Amp.? Help anyone pls! Thank in advance ..

@morgattfpv5548 5 лет назад

Please make a review of the isdt H605 Air

@Kekstreetboy 3 года назад

Whats the lowest voltage i can go with a 1s liHV? Until i have to land so i dont destroy the battery?

@k6lsn 5 лет назад

The happy Model and the uruav also need a wall adapter or lipo to actually be a charger so you gotta include that in the price in my opinion. The nectar injector comes w USB cable, ready to go...bam..The ISDT doesn't charge to HV I'm pretty sure right?

@MCsCreations 5 лет назад

Really nice little chargers, JB! Great review! 😊 I'm personally between those 2 as well... Didn't decided yet which to buy. BTW, I can't let my mistakes in my videos, because I curse a lot! 😐 Kudos to you for not doing that!

@k6lsn 5 лет назад

I dig my nectar injector, fast, comes w USB cable, all you need. Get 2 if you are really whooping alot :) cheap too, grab a newbeedronelanyard or some motors while your there and you still get out cheaper... :)

@MCsCreations 5 лет назад

@@k6lsn Thanks, dude! 😊 The problem is that I'm from Brazil... Here we have absolutely no hobby shops and the shipping from the US is unreal... Really expensive! 😕 So the only option is Banggood and things like that. 😕

@k6lsn 5 лет назад

@@MCsCreations NewBeeDrone should ship there reasonably I would think?

@MCsCreations 5 лет назад

@@k6lsn I don't know, never tried... But, for example, I want to buy one of the new toothpick frames from Kabab FPV. The cheapest shipping fee? 20 dollars. 😕 And I've seen worse. Much worse. 😕

@k6lsn 5 лет назад

@@MCsCreations wow, sorry man, crazy .I wanna get one of his Toothpick frames next month also. Well at least you've got some options w bnggood n such..k, TC, c u around :)

@TheManFromMoon 5 лет назад

Hi Joshua, thanks for your video. I'm looking for a tinywhoop charger which can also storage the batteries. This feature is missing at all products I found in the past. Do you have any hint? It's a pain when I charge my 15+ batteries, go flying, and in the end I want to storage all batteries, which takes much more time than the flight time before.

@JoshuaBardwell 5 лет назад

I don't think there is one yet.

@remainsmemories626 4 года назад

4:13, you should probably mention, that 6-channel URUAV charger also shows individual cell voltages. Not so conveniently - they cycle instead of showing all at once, but still

@koolcamdaman 5 лет назад

Hey Josh! One thing I have been wondering is do I need to store 1S batteries with a “storage charge? Will it extend battery life?

@JoshuaBardwell 5 лет назад

Yes it will, but unfortunately there aren't any 1s chargers right now that will do it.

@erickva 2 года назад

@@JoshuaBardwell Hi JB, is this still true 2y later? Thank you.

@markrawson2577 3 года назад

Does that mean the tinyhawk 2 can be charged to 4.35v?

@StevePinkham 5 лет назад

Can we get a charging accuracy comparison? I have like 4 different chargers, and none of them charge consistently to 4.35v a cell. One will stop charging a cell that is between 4.2 and 4.35 if another battery is added or removed on another port, and won't charge a battery to 4.35 if it's already over 4.2. The other ones have individual ports that over or undercharge. Features are nice, but consistently accurate charging voltage is the baseline nothing I have yet meets except my parallel board on my full size charger.

@natemanafter 5 лет назад

Do you have a newbeedrone affiliate link now? I have some purchasing to do there =D

@MickRatanapanyo 3 года назад

JB, from your experience.. do you find storing 1S at full charge actually damage them? I fly 1S-6S and normally I take great care of LiPos larger than 1S, but it's curious that no manufacturers have ever released a charger with storage functionality for their 1S LiPos. I've seen a few FPV guys store their 1S at full charge.. only to find their capacities don't change. They don't ramp HV nor abuse charging voltages of course. Are these your experiences as well?

@JoshuaBardwell 3 года назад

Yes storing at full charge definitely damages them.

@MickRatanapanyo 3 года назад

@@JoshuaBardwell thanks!

@kieranshaklee4065 5 лет назад

i am going to upgrade my quad to some samguk motors. which ones would you recommend. i have 20 amp ESCs.

@JoshuaBardwell 5 лет назад

Personally my favorite are the 2207, higher-kv. But the 2400-ish kv would be more general purpose.

@Klawful2011 5 лет назад

Joshua Bardwell, can you do a review regarding the different whoop connectors. You say that JST has less voltage drop than MMCX? Can you prove that? Voltage is REALLY important for whoop performance.

@JoshuaBardwell 5 лет назад

I'm just repeating what others have told me here. I haven't tested it yet.

@JosephDawson 5 лет назад

I like knowing how close the battery is to charged...

@takuya2431 4 года назад

so i could charge my 350mah batteries with the 0.2A Setting on the UR65 right? It would just take longer but would be just as safe right?

@RADERFPV 3 года назад

You can safely charge 350mah's up to .7A, wouldn't go higher than that. The safe charge rate is 0.3A on that charger, that's the closest to 1c. I wouldn't bother overthinking it though, the draw from the quads will be killing the little 1s lipos faster than anything else. Thankfully they're cheap to replace.

@Flumphinator Год назад

This is an old video, but I got a Beta FPV Meteor65 Pro and the included charger ended up charging both of the included batteries to like 4.7 volts. Ruined both of them. Lucky they didn’t blow, since they were unattended (my mistake).

@nimaiazevedo7383 4 года назад

What about the tbs one

@marshallfpv392 5 лет назад

No love for the BetaFPV 1S lipo charger? Although good video and I will probably pickup that HappyModel charger

@JoshuaBardwell 5 лет назад

That's a really good charger. I just don't happen to have it at this exact second.

@licensetodrive9930 5 лет назад

The lack of charging/discharging to storage voltage on all(?) of the 1S chargers on the market is disappointing.

@JoshuaBardwell 5 лет назад

I am working on this blatant oversight.

@licensetodrive9930 5 лет назад

And I'm working on modifying one of those Eachine chargers (identical to the Happymodel) so it can charge 2S packs. Just waiting on a couple of $3 parts from China for the mod.

@joelspangler 5 лет назад

@@JoshuaBardwell - looking forward to seeing your solution - I really want a 1s charger with the ability to put the batteries to storage.

@MBrulla 5 лет назад

Just fly them. You're talking a 3 minute flight to drain them and nominal charge is where we normally land anyway. Never understood that concern.

@heroflying 5 лет назад

@@JoshuaBardwell I recommend the URUAV Lipo Killer to address this. It's great for completely depleting any LIPO, but it also has balance lead pins you can plug into to storage deplete your battery, which works great for 1S. They're like $8. I know you can't use it to charge up to storage voltage, but its easy enough to charge them to at least storage and them plug your batteries into it to get them back down.

@shaneintegra 5 лет назад

Damn only $14 for the Pro. Definitely a great deal!

@atlanticwoodsman8347 5 лет назад

Actulay I have a question now.. Does the happy model shut down once the battery has a full charge? Or do you have to keep monitoring it.

@JoshuaBardwell 5 лет назад

Yeah it shuts down. They all do. It'd be really dangerous if they didn't!

@riomit1 5 лет назад

He says this because lots of people have been experiencing this charger overcharging when switched to 4.35. Charges up to 4.42

@BcHmF 5 лет назад

Who needs a screen?! ME! I take the URUAV! :D

@FTB1776 5 лет назад

Did I miss something or did the guy who soft mounts his ESCs just say that he also charges standard 1s lipo's with HV settings on his charger?!

@yonirotvel1 3 года назад

Anyone know where i can get a power cable for the "uruav 6 in 1" for charging at home?

@RADERFPV 3 года назад

You can just grab the UC1 adapter he mentions at 6:21, then charge off any USB outlet/powerbank. It will be cheaper, and you'll be able to use for more than just this one charger.