tinySA Ultra observing WiFi and other networks 

Hello Erik, Recently I can call myself the proud owner of this fenomenal product, because that's what it is. For people like me, who can't afford a full-scale spectrum analyzer, this really is a revelation! I can only imagine about the amount of effort and time that went into developing and realising this wonderful device. And to offer it for such a low price opens up a whole new 'spectrum' of possibilities for a lot of people like me :o) Thank you!! Keep up the good work!

Thank you Erik. I did not think to turn off spur removal. This was AWESOME.

I am recommending this video to my HAM clubs. Thank you.

thanks for the great review

Dear Erik, one question about the max input level. I see on different photos different values printed on the enclosure. I see: +10dBm RF 10VDC, +6dBm 5VDC, and +10dBm 5VDC. Also the pictures on the site of the authorized reseller Eleshop has different pictures on the same device. Have there been different versions with different specifications?

this new version is very interesting. i have a couple of questions. 1) Is there any software that runs on windows to interact with this device? 2) have you considered a web interface over wi-fi to interact with your devices?

Nice! Thanks.

Brilliant!

Just awesome

I didn't think my Ultra could do anything until I watched your video Thank you. Cheers from So.CA.USA 2nd House On the Left

Thank you.

Thank you. very interesting

Very cool!

Bluetooth could be interesting to look at as well, e.g. while transmitting audio to a bluetooth speaker. I wonder how the tinySA copes with the excessive frequency hopping that bluetooth does.

HI Erik! I'm looking at one of these units to check for activity in the range of 520-608MHz for my In-Ear Monitoring systems - the Shure Wireless Workbench software only works with whatever the device antenna range is and my In-Ear Monitor systems are Sennheiser and LD Systems. Is it possible to set a range as per the above and then monitor said range? Thanks so much for a great product, it looks far more comprehensive than the RF Explorer that some of my colleagues use for this purpose. Andy

Hi Erik. Question. Why is the trace (from time to time) jumping up-and-down about 10dB? (for example when you was looking at the WiFi traffic).

Is it possible to download data from the internal SD-card to computer? Or must the card be removed from the tinySA and read directly from a PC?

Hoi Erik een vraagje Kan ik de Tiny ultra ook als antenne analyzer gebruiken ??

Hi , I have the Tiny SA , i only do 27mhz ssb cb radio restoration, would there be any benefits purchasing the Tiny SA ULTRA as well for my HF work? I am still sort of a beginner. Much appreciated.

I saw in other comments that it can set an alarm when detecting signals above a certain treshold. Have you tried this feature. And also is it possible to get data out from it and set an external alarm. Lets say to an raspberry pi for example. Im doing a little projekt to detect signals.

Hi Erik can i measure or find signals coming from tv remote and toys remote on tiny sa. I tried my tv remote against tinysa but was not able to see any signal. Am i missing something or the power is too low for tinysa

Hi, Is it possible to make an audiable alarm if the signal strength in the scan reaches above a certain threshold ? Looking to detect proximity of Emergency vehicles broadcasting on APCO25 in the 700+Mhz range.

Good afternoon, something happened to my tiny sa. after the update, there is a full scale over the entire measurement range. self-test fails. help with advice

Can tinySA ultra detect a drone activity with the antenna included in kit?

hj Erik, could you add the antena factor for calculation of power flux in W/m2, and is it frequency compensated?

This tool is GREAT!!! just recieved min now.. Thanks for yout channel

Sorry, what detector does this analyzer use? Peak?

Could we do the calibration of the rf signal gen(frequence)?

Hello my Tiny Sa ultra is taking forever when enabling ultra mode. how to fix this problem ???

Is it possible to demodulate FM transmissions between 88MHz en 108MHz?

HOW ARE YOU DOING THANK YOU FOR YOUR VIDEO ON YOUR YOURTUBE CHANNEL I WAS GOING TO ASK YOU ABOUT ONE THINK I HAVE A ELECTRO MAGNETIC EXPOSURE FROM WORK ENVIRONMENT AND I WOULD PERSONALLY LIKE TO MEASURE THIS IS THIS IS SAFE OR I WOULD NEED TO USE SOME SAFETY MEASURMENTS ALSO I WOULD LIKE TO RECORD IT - AND HAVE A JOURNAL OF HOW MUCH EVERY DAY AND WHAT TIMES I HAVE THIS EXPOSURE ON AROUND THE AREA WOULD YOU RECOMMEND ALSO SOME SPECTRUM ANAYLZER AS WELL CONNECTED TO A EM METER THANK YOU FOR YOUR TIME LOOKING FORWARD TO HEAR FROM YOU BEST

How about checking leakage of microwave ovens?

What about aircraft radio altimeters?

Hi adam is this device capable of detecting listening devices bugs etc

One thing that makes me wonder is if the portapack can do the same thing?

Does it come with a case? 😶

What about the 5ghz band? It says it can sample up to 6ghz, but can it do a reasonable job of it?

Excellent. Thank you

Is this also possible with tinySA?

With an amplifier s very useful or dangerous tool. It's not the gun that kills its the nut behind it.

Like to see if it picks up cell calls

I have ordered TinySA Ultra from Zeenko store. After 10 days of waiting for unit to be shipped, they replied : "Hello, I'm sorry Because it is a charged equipment, the logistics cannot be delivered. Please apply for a refund." I am speechless...