TIPS AND TRICKS - GHOST LOADING APS CAM870 | AIRSOFT
Today I will show you how I ghost load a CAM870 shotgun.
HAPPY HALLOWEEN!
Share this video: • TIPS AND TRICKS - GHOS...
Equipment necessary:
- APS CAM870 shotgun
- CAM870 shells: airsoft.tiger111hk.com/p27002/...
STEP 1: EXPLANATION
So what is GHOST LOADING?
It’s a method that allows you to load an extra shell.
Normally a super shorty will hold only 2 plus 1, which means two shells in the mag tube plus one in the chamber.
With ghost loading you add one extra ghost shell to the magtube, making it 3+1, with the ghost shell partially loaded into the mag tube.
STEP 2: PRACTICE
Let´s break it down
The first and second shell are loaded normally.
After those I need to pull back the bolt about ⅔ to ¾ of the total travel length.
Be careful to pull the bolt too far back, since that will engage the carrier and ruin your ghost loading.
Too little and the ghost shell won’t fit.
The third, ghost shell, is then dropped into the ejection port onto the carrier.
Now I can put the fourth shell into the chamber.
In order to close the bolt, I must align the ghost shell with the rim of the second shell.
STEP 3: METHODS
There are two different methods to accomplish this.
The first is to use your thumb to partially push the ghost shell into the mag tube and then close the bolt.
The second, slightly faster, method uses only the carrier to position the ghost shell, and then the bolt to push it in.
Please note that I’m performing these modifications at my own risk. Do not try to replicate unless you have full understanding of how this might affect your shotgun or other equipment involved.
25 окт 2017