TJ-Canoe - Part 1/4 | Self-Designed Plywood Canoe (Free Plans)

Подписаться 762

Просмотров 34 тыс.

50% 1

This video series is about a DIY canoe made from plywood, which I designed and made myself. I decided to make a cheap canoe, which can be built in a rather short time. So this canoe is made of plywood and built with the stich and glue technique. The wood I used, in the end, was pine and it was actually waterproof.
In This first part I show you how I came from the idea to my CAD-model, made the plans and templates and started cutting out all parts of the hull. All plans and templates were made in Lockdown when I had enough time for this.
Requirements:
- Min. Time: 70h
- Min. Workspace: 6 m * 3 m
- Power Tools: Jig Saw, Eccentric Grinder, Circular Saw, Router, Vacuum Cleaner
Bill of Materials:
- 3 Sheets of Plywood (250 * 120 cm)
- Wood for Gunwales, seats
- Epoxy 2.5 kg, Cotton powder 1l
- Varnish 2.5 kg
- 2 Sheets of Fiberglas 160 g/² (1.5 * 5m)
Total Dimensions: drive.google.com/file/d/18Vvr...
Arrangement on Plywood: drive.google.com/file/d/1_hf6...
Plans in DIN A0:
Bottom 1 drive.google.com/file/d/1j3Rj...
Bottom 2 drive.google.com/file/d/1K3Gj...
Planks 1 drive.google.com/file/d/1A8hU...
Planks 2 drive.google.com/file/d/1q3E3...
Scarf-Joint-Jig: • Homemade Jig For Cutti...
_______________________________
Instagram: / tinkererjake

Наука

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@nicolamullings7993 2 года назад

Well done sir, nice video, easy to follow and well explained.

@muhammadzamzami8460 7 месяцев назад

its great job.

@litoral24 Год назад

Esta canoa canadense é uma maravilha, por favor me envia este projeto com estas medidas, pois não consigo usando o computador, obrigado

@Thestripper1 2 года назад

4:41 use the thickest paper that your printer can handle so that your model is not a waste of time. I also think you could have done some more work with the bottom panels to avoid the flat hull section and also get rid of the kink in the bow and stern when viewed from the side.

@TinkererJake 2 года назад

Thanks for your input. I also thought of making the next model of balsa wood to get a better feeling for the curved areas of the plywood. Now that I learned a bit more about plywood construction I agree that the kink can be reduced or avoided (like the bow of a seggerling sailboat e. g.)

@martinjosealvarez 2 года назад

Motiva tu proyecto gracias

@gifts_in_wood2294 4 месяца назад

Fantastic boat, fantastic video series and over all job well done. Are your plans available in dfx or svg format? Marty

@TinkererJake 4 месяца назад

Thanks! A SVG is attached to this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pz0cAEkyfa0.htmlsi=oESpP8X5fjUgJerw

@juancarlossandoval3351 2 года назад

Buenas té saludo desde mi bella Colombia y quería saber si puedes decime las medidas y si puedes ayudarme para tener o fabricar mi canoa como la talla gracias

@atelierkaizen 3 года назад

Hallo! Besten danke für deine Projekt!! Es ist sehr nett von dir😃 Wie groß müssen die Zeichnungen gedruckt werden? Besten danke aus Venetien

@TinkererJake 3 года назад

Vielen Dank! Die Zeichnungen haben die Größe DIN A0. Viel Spaß mit dem Projekt!

@atelierkaizen 3 года назад

@@TinkererJake nochmal Dankeschön

@TinkererJake 3 года назад

Here you can see the current status of my boat project: instagram.com/tinkererjake/

@SergioLuis-hr5oh Год назад

Tradução para português

@othername1000 2 года назад

I have no idea how to interpret the attached images as plans. Are there measurements somewhere?

@TinkererJake 2 года назад

These are full size Plans. I had them printed by a copy shop and used it as paper templates. I tried to explain this in the video. Also I attached a *.svg which is a vector graphic. You can take any measurements you want from in (e. g. In inkscape)

@othername1000 2 года назад

@@TinkererJake Ok thanks. Was just opening as pdf for me. I'll have to look into that

@eilangoren 3 года назад

Which program u use

@TinkererJake 3 года назад

CAD - Rhinoceros 7 (4:13); 2D-Drafts - Inkscape; Editing - Davinci Resolve; Smartphone - Android :-)

@hardystein114 4 месяца назад

Problem is ....almost all sheets of plywood are 2440 x 1220 in most parts of the world . Will this still fit on those shorter 2440 sheets ? 2500 is not standard.

@TinkererJake 4 месяца назад

Hello, I think that should work for the sheets 2 and 3. But not for sheet 1 (bottom parts), especially if the components are to be scarfed, in which case the scarfing area must be added to the end of the parts. But with 4 2440*1220 sheets it should fit. In the video description of the 2nd video there is also a file with the components as vector graphics, so you could also change the segmentation if necessary.

@hardystein114 4 месяца назад

Yes looks like I will need 4 sheets total then.Thank you.@@TinkererJake

@amjedadel1856 2 года назад

Thank you for your good video,its amazing bor. So can you send the file of the measerment of the canoe peaces , i want to print and cut according them please.

@TinkererJake 2 года назад

There are templates for the pieces in the video description (*.pdf). Also you find a *.svg which is a vector graphic in mm of all parts.

@amjedadel1856 2 года назад

@@TinkererJake thank you bro.

@bipedalhominid6815 2 года назад

If your German why didn't you make the video speaking german?

@TinkererJake 2 года назад

I am asked this question a lot. I think the community in Germany is relatively small and I want to share my plans and experiences with many people. Also I see it as an opportunity to improve my english :-)