TLS Brembo Big Brake Upgrade for CHEAP on your HONDA! - Step by Step Guide

Подписаться 307 тыс.

Просмотров 9 тыс.

50% 1

Whaddup gang! in this video I go over the topic of BIG BRAKE KIT and how you can do it for cheaper without having to spend the big $$. I go over all the parts you need and where to get them and what application this would work for. If you have any more questions, please be sure to leave a comment down below!
DISCORD: / discord
WEBSITE: www.zoshmfg.com/
PATREON: patreon.com/Zosh
INSTAGRAM: / percymescudi
FACEBOOK: / zosh316
SUPPORTED BY:
Hybrid Racing: www.hybrid-racing.com/pages/t... (Coupon Code)
Action Clutch: Save 15% off with code ZOSH @ actionclutch.com/
Coggin Acura: 20% off all ACURA PARTS all you have to do is mention my name! or you can visit them - 4400 South US 1 Highway, Fort Pierce, FL 34982
Direct Line to The Parts Dept. (772-461-8588)

Авто/Мото

Опубликовано:

12 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@jacksonkhenyarath9167 3 месяца назад

Bring back the SUPA FAX!

@maxtengotthejuice 3 месяца назад

Look I know this video is about brakes. But I’m here to remind you that zosh can’t be stopped no matter what set up you run. Zosh the 🐐 no 🧢

@georgep.692 3 месяца назад

You can use OEM caliper bolts for TL-S for this as well and they are normally super cheap from dealership. Part Number 90107-SEP-A50. Also from my experience, 9th gen and CU2 TSX/Accord you don’t need to bother with doing the TL-S master cylinder.

@WhimsCafe 3 месяца назад

This video was straight heat. F*** all the drama. Zoshnation ain’t worried about any of that. Just keep doing you bro. There are way more grateful individuals who can move forward in their build and goals vs crying gatekeepers.

@KBros 3 месяца назад

Big eye opener plus it’s a nice lil project to do by yourself without getting taxed by these companies and then have issues with no warranty

@marlikwinnin 3 месяца назад

ZOSH THE GOAT 🐐 been rocking with since 2015 since I was a freshman I’m 23 now, much love bro

@cal3240 3 месяца назад

This video is PURE GOLD!!!!!!!!! Zosh for president 🇺🇸 🔥🔥🔥🔥🔥🔥

@davidb3390 3 месяца назад

Great video Zosh keep ‘‘em coming g

@F0BBYLEE 3 месяца назад

Amazing info.. time to upgrade brakes and rotor on the S2!

@victorwilks88 3 месяца назад

This man is back !! 99.9 jamz

@tgrif5082 3 месяца назад

Thanks bro needed this upgrade

@Vicwavy 3 месяца назад

Zosh for the people! I been needed to do this tho yo lol.

@jhanortiz7461 3 месяца назад

Thank you for this video. I went through something similar with Dc5 Creations. I bought the ctsv bbk for my s2k, which he advertised to fit. I paid a little over 1.6k for the kit and buying brake lines, rotors and pads. And when i tried installing it, it didn’t fit. I contacted him and he said he would make me brackets to fit the calipers. Its been 3 years now. Ive contacted him and he says he hasnt had the time. Its sad that people like these are still in business. I decided to buy a DC5 , and i will be using the bbk now.

@user-ex7vt9cj6q 2 месяца назад

Respect for the advice

@ksboi29 3 месяца назад

Great information ❤

@WhimsCafe 3 месяца назад

It’s crazy to think, if you really wanted, you could have pieced together a kit and sold them for less than what these hustling companies charge. That just proves you aren’t trying to take cash out of anyone’s pockets. Stay humble my friend, we appreciate you.

@chrisasaurus 3 месяца назад

Hellz yeah man great info ... if those companies are getting mad it's for a reason $$$

@cedarioustaylor514 3 месяца назад

Salute to the bag!!!🫡

@Bacongreasemedia 3 месяца назад

love you bruh great videos

@MrRegahlah 3 месяца назад

Informative! 💪🏿

@fvckadonys 3 месяца назад

I have the same bbk from dc5 creation and something happened to me. You can also buy Hyundai genesis coupe brembos from o’reilys , they are direct bolt on

@Zosh 3 месяца назад

YES! I failed to mention that. The genesis BBK is a direct bolt on!!

@MartinMartinez-ux8kj 3 месяца назад

Does this apply to the rsx type s too?!

@chrisasaurus 3 месяца назад

@@Zoshno machining needed ?

@JustAskFN 3 месяца назад

I believe you can also use the rotors from the Nissan Rougue 3rd row seat. I haven't tried it myself but heard it works.

@vietbboi813 9 дней назад

Would be more cost effective if you take your calipers to a CNC shop to mill down the thickness around the bolt holes.

@linobandz 3 месяца назад

I got some Type S brembos for 30 bucks today this was def helpful 😂🙏

@SavageMFG 3 месяца назад

Nice info big brake time

@joaquin0023 3 месяца назад

I don’t have anything against dc5 creations since I’ve bought a few things from him but recently a set of retrofit headlights I got from him before he was dc5 creations started to get condensation inside 😢 so I need to reseal them. I agree with the bbk prices, at first it was supposed to be a budget kit but then got more expensive. I remember before these became so Popular I made my own kit for under $500 and still run them 5 years later no issues

@mrsideways4574 3 месяца назад

brembo calipers from a 2013 gensis work as well and they are bolt on you have to shim them and us a Nissan Merrano 3rd row calipers or at least I know the TSX guys have been doing it for a while

@chrismoo4926 3 месяца назад

The price breakdown we did was fucking absurd. Happy to see this being put out as public info and not hiding behind a paywall. Good shit Zosh🫡

@brandon_buildsDIY 3 месяца назад

I got the kit from him also. The pins that hold the pads on are so hard to push in. The pin backed out and my outer pad became loose. I texted him and told him what happened he said I just needed to hammer the pin in deeper, I ended up going to autozone and getting a 3rd gen 4Runner brake pad pins and cotter pin and modified the calipers run those pins. I track my car so I constantly need to switch from street pads to track pads. I’ll be making a video on this install on my channel. I have the stuff filmed just needs to be edited.

@Nighthawkrsx 3 месяца назад

For all my RSX-s owners, you can’t upgrade your brake master cylinder because our fittings don’t fit into the cylinder. I know because I tried, there is a way to make it work but you’d have to wait til I upload that vid on my account lol. I lucky pieced my kit myself with the help of aerogenics kit, I highly recommend. If you do want to use rotors of your choice, aerogenics does give you the measurements of how much you’re supposed to bore you rotors. I had a terrible time looking for a machine shop to bore rotors. For my next rotor change I’d just go with the kit that aerogenics has.

@jaeco8151 3 месяца назад

I went the RL route with my 9th gen, its the best updrage ive done to my car😂

@staywdafressness 3 месяца назад

We appreciate you cuz

@m4xripper 3 месяца назад

was looking at getting the brembos off rockauto but gonna go another route

@tripstomexico9770 3 месяца назад

I believe the mini cooper S also has compatible rotors

@breezysoco 3 месяца назад

thanks gang

@subiesnhomies7754 3 месяца назад

Zosh uploads in 24’!? Say less!

@chrismoo4926 3 месяца назад

“You mean it’s stripped” is crazy as hell. Jumping to a conclusion when no info was given prior is interesting☑️

@estewar03 3 месяца назад

had to comment this, I randomly paused it @ 11:18, the look on your face had me dying.

@Garagegraderacecar 3 месяца назад

ALL the reman stuff, which they use also... leaks with the cross over O ring. on my old TLS kit did, and almost everyone else i know had one... thank god i can buy them in 8 packs! my only issue with the TL-S setup is they are HEAVY

@francissosa3495 2 месяца назад

@zosh love the vid but i have one question that noone ever mentions on this set up wich is. Wheel fitment? Can i still use stock si wheels?

@magicevo9133 3 месяца назад

I bought mine on rockauto couple years ago. I’m not paying these crazy prices for no used calipers I’m going to have to rebuild 🙅🏾‍♂️

@m4xripper 3 месяца назад

was about to say rock auto has these also

@jdsphynx3656 3 месяца назад

Hi will that work in 94 eg or what will be it be a same route for my setup

@alexhammmonds8754 3 месяца назад

What happened to the e85 safe sending unit you used to sell for 8th gen? I wanted buy

@__flako 21 день назад

im tryna do this on my 10th gen si should be the same?

@lowboi_media 2 месяца назад

SUPA FAX

@BrandonPastor610 3 месяца назад

I did mine for 570 total i just went s2k rotors slotted and drilled

@boyfluf 3 месяца назад

W video

@mugen-siboyg4382 3 месяца назад

Gatekeepers are hella mad at u bro 😅 stay safe and always carry the blicky on u my boy

@manchuperez3287 3 месяца назад

You should stick we the Acura Gray Rsx

@etrevi2576 3 месяца назад

aye take it nice and slow homie, you always got that quality tho bro

@Bulet618 3 месяца назад

Will they work on 1st gen ILX?

@jesus_kyngsmith9498 3 месяца назад

U need to be active on your blogs cause money can make from your channel be more consistent ☝️ love ur videos

@AngelHernandez-rq1nw 3 месяца назад

Would these work with a 1st gen tsx?

@skullchains3696 3 месяца назад

Yo zosh. Can u list what u all got for it.

@corey9763 3 месяца назад

It’ll work on your ILX too for anybody wondering

@THExFREE1 3 месяца назад

The TLS, big brake set up also works on ep3s

@tripstomexico9770 3 месяца назад

And 7th gen civics

@tripstomexico9770 3 месяца назад

@ElVerdaderoRandy not for 7th gens but is recommended for other models

@Jc_true 3 месяца назад

Respeck to deh man!!! 🔥🔥🔥

@gxrms_ 3 месяца назад

Or you can also go genesis brembo bbk! Direct bolt ons with original caliper bolts and Nissan rouge (3rd row seating) Rotors. Autozone rotor part# 76021DL. Zero complaints with this setup on a boosted 9th gen

@REALSHYT666 3 месяца назад

What year TSL do I need to look for to buy for my 8th gen ?what year S2k rotors ? Can we get a bit more specific on what year parts we need to do this ? Also what Brake lines do we need with this set up ?

@Tonyk24 3 месяца назад

Ngl bro you should try to do some research. Everything is pretty straight forward. TL type s was only made for 07-08, buy an areogenics kit and skip the s2k rotors. He literally says stainless steel brake lines for 8th gen.

@siamapipanyakul9565 3 месяца назад

Brake calipers fit civic EK

@prospectgarage5505 3 месяца назад

07-08 tls brake lines to match any year s2k

@adanmata8625 3 месяца назад

Can I just return any caliper for the core or does it have to be similar to Brembo caliper💀

@JoshOn2Wheelss 3 месяца назад

If you have a GC saying you have issues too then something wrong with the product if everyone has issues too

@GodsGunsGlory777 3 месяца назад

I need a fa5

@84jeremyduran84 3 месяца назад

Talk your shit bruh! 😂 haters going to hate.

@chrisb15679 3 месяца назад

This info has been on forums and youtube for a while. Idk why people are mad? 🤷‍♂️

@rastaman7140 3 месяца назад

What about the turbo manifold and turbo parts? Does DC5 creations make quality parts?

@Zosh 3 месяца назад

I haven’t had any of those parts from them that deals with turbo manifolds & parts. So I can’t give you an answer on that. Their AC tuck kit is super good though! ✅

@rastaman7140 3 месяца назад

@@Zosh appreciate your feedback man. Keep pushing man!!

@ibntariq4457 3 месяца назад

🐐🐐🐐

@geoffreytaylor5748 3 месяца назад

🔌

@mikeberrios1859 3 месяца назад

amazon and eBay sell those calipers too just not real Brembos, nothing new lol

@angellozano1839 3 месяца назад

Same thing as a eg/dc2 when they want to go type r 5 lug conversation. You don’t have to spend all that money Just get a crv 5 lug hub press it in your spindle and BOOOM it’s not real type r 5 lug BUT WHO WILL KNOW ?

@salvadorgonzalez2613 3 месяца назад

Preciate you G 🤙

@Johnnie5213 3 месяца назад

👍👍😎

@Inline6TV 3 месяца назад

This is funny people really gatekeep and overprice things. I’ve been running reman. Supra TT front calipers on my is300 and never had a problem. Also got both for $170 and it has warranty so 🤷🏻‍♂️

@joserascon6664 3 месяца назад

What about cheap big brake kit for a Integra ???????

@Zosh 3 месяца назад

Wilwood DPHA kit - $400

@justiceeeeee. 3 месяца назад

first! UNCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC finally back 2 weeks later.......

@MoJoNinjaGarage 3 месяца назад

Quality over quantity so put them in when you can brother! We know it will be fire once I posts!

@Zosh 3 месяца назад

That’s right brother!!! 💪🏾🔥

@hellraizer06 3 месяца назад

How along before yall think bro will go m.i.a again?

@Zosh 3 месяца назад

Chill!! We back bro 😭

@js_playa 3 месяца назад

That's on him. f**k do you care for?

@colewebber6756 Месяц назад

i think 400$ for not drilled or slotted rotors with a little metal circle in the middle is kind of ridiculous

@Tonyk24 3 месяца назад

Dc5 creations kit is overpriced imo. For something that thats supposed to be a budget upgrade that shit comes out to 1200 cad 😭😭 better off just piecing it together yourself.

@m4xripper 3 месяца назад

foreal was about to cop some off dc5 but didn't bother cost as much as another bbk

@eddiehp6108 3 месяца назад

Way better off piecing it together especially if you got parts deals

@emtymedia 3 месяца назад

1200?? For $250 more renegademotorsports is currently doing a preorder on spoon calipers $1450. Retail everywhere else is $1650. 🤷🏻‍♂️

@KellyWilliam-bf6er 3 месяца назад

I break this down since you seem to be a dumbass like Zosh. Aerogenic kit $395 with the spacer and crusty rotors. Requires you to drill out your spindle & buy arp extended studs another $80-100 dollar. Kit doesn’t NOT include pads or any additional hardware. Also now you push your wheel further out 5-8mm terrible! $395+$100 arp stud kit, good pads $$70+calipers $200-250 yet no powder coating total $815 Dc5creations kit: 2 calipers already machine to bolt up $489+rotors zinc coated $145+ $70 for pads: $704 Cool I didn’t have to drilled out my spindles or stack a spacer behind my rotor which cause my wheel to push further out. Or you can mail your calipers to him for $209 to machine them. Next vision work: calipers plug and plug $750 rotors $145+ pads $70 total $965 They all sell the same calipers but they charge for service nothing is free I’m sure you go to work and expect to be paid ?

@KellyWilliam-bf6er 3 месяца назад

I break this down since you seem to be a dumbass like Zosh. - Aerogenic kit $395 with the spacer and crusty rotors. Requires you to drill out your spindle & buy arp extended studs another $80-100 dollar Kit doesn't NOT include pads or any additional hardware. Also now you push your wheel further out 5-8mm terrible $395+$100 arp stud kit, good pads $70+calipers $200-250 yet no powder coating total $815 - Dc5creations kit: 2 calipers already machine to bolt up $489+rotors zinc coated $145+ $70 for pads: $704 Cool I didn't have to drilled out my spindles or stack a spacer behind my rotor which cause my wheel to push further out Or you can mail your calipers to him for $209 - bolt up calipers $489+rotors zinc coated $145+ $70 for pads: $704 Cool I didn't have to drilled out my spindles or stack a spacer behind my rotor which cause my wheel to push further out. Or you can mail your calipers to him for $209 to machine them. Next - vision work: calipers plug and plug $750 rotors $145+ pads $70 total $965 They all sell the same calipers but they charge for service nothing is free l'm sure you go to work and expect to be paid ?