Too Many Extra Wires in Your Engine Bay? TRY THIS! 

I went to West marine and bought a fused distribution block, and a bracket with two relays, both key on powered to run accessories, works perfect, probably could have saved a buck ordering it, but when motivation hits, some times you gotta spend a few extra dollars.

I like the idea and it would make adding stuff a lot easier but I would definitely have to go with a different location. Nice project though 👍🏻

Brilliant idea, I’m looking for ideas on how to clean up the engine bay in my 12v cummins and this will come in handy! Thank you so much for posting this

I need to do this. Thanks for the idea

Tight work ninja!!!! Been brainstorming myself about how to clean stuff up. Great video today! 🍺👍

Love this kind of content.

Thanks for a good tip.

Good way to cean up the wiring. We'll done. Thanks for sharing 👌🏾😎

This is awesome and very useful

Great tip brother! 👊🏻

Don't forget to drill a whole in the center of the lid for each distro block, so it won't hold water and dirt.

Been waiting for a Brew2l fix,lol! That's a great idea and product.👈💯

Make sure your holley is directly to the battery

Beautiful mustang…. Thanks for the vid!

So thsbkfuk for finding your chsnnel man. Been lesrning all about my carburated 83 fox. Stsring wrenching on it on my own shoukd be a great peoject now that my little one is here 🤙🏼

This will be great for a wire tuck, which I’m going to be doing soon. Thanks!

Wire tuck look great for sure. Hopefully I can get to the point of cleaning mine up one day.

Hey I've been a long time fan and watch her I think a great idea for your channel would be to have a drawing.. Where someone could win the opportunity to bring their Fox body Box body to you to have you do basic maintenance on.. It'd be great for your channel I know I'd watch it and let you take my Fox body

Such a simple thing and I totally forgot about a setup like that thank you for this video I know what I'm doing this weekend quick question for you how did you run power to your coil with the Terminator X

Hey I have that exact distribution block except I kept it in the engine bay and my battery is in the trunk. Nice!

Looks good! Just make sure holley is direct to the battery.

I’m the same I can try and try but my electrical always looks non professional. From rc cars to cars stereos. I don’t know how the pros do it. Great video.

Very nice! I have some of my power wires on a second stud wired to the solenoid. I don't really like it though. A couple years ago, I bought all these distribution blocks, bus bars, relay blocks and a maxi fuse block to eliminate my solenoid (I have the mini starter anyway) and fusible links. Wish me luck! haha

What's up Brew2l!... Love the content..

As someone who has dealt with 12v wiring for a decade as my career, this is honestly not bad at all. Definitely better than any Jeep owner I’ve seen. You addressed two key things which is it’s not ideal for wet conditions, and that it’s just one of 1000’s of products available to conquer this task. Keep up the good work and I’m sure it will look the way you want soon!

i watch many foxbody vids and your the only one left , the rest well just dont cut it.great work your doing keep it up.

Good idea BREW2L, the distribution blocks are really cool, it is much better than 50 wires going to the battery that seems to happen, your location is in a good place, as long as not rain driving or jumping railroad tracks. haha..

Whats up Brew2l, worked on mine this weekend. Previous owner had a big stereo. It had to go. Great video

Hey Brew2l. I noticed you have ridden without spring isolators. I have the top one on the front but none on the bottom. I have both in the rear. I just can't get these springs in with both isolators no matter how hard I try. I'm even using the maximum motorsports spring installation tool and I still can't get it close enough with the lower isolator on. Will it ride really harsh because of that?

Great idea 👌🏾

Good, helpful vid. Gave me some ideas. What was your reason for removing the inner liners? I'm thinking I might do that. My car doesn't hardly ever see harsh driving conditions.

I have a question I’m doing a carb swap 5.0 I wanna use the factory cluster and ac. Can I go through the motor harness and cut out everything I don’t need? Oh and I using a 6al box and hei Distributor

Brew2l I uses the same kit, safe yourself a headache and isolate the power distribution block from the frame that you mounted it to with a piece of rubber or even duct tape.

Hey man. Any tips or tricks to get rid of the throttle body whistle?

I did the same thing in same spot woth same power block. I forced the fender liners in and works great!

Would the supply wire into the block get hot from powering all the others?

Hell yeah

Try this throw all that away and put on a carburetor 🤘 Kidding kidding 😂 we own both a efi turbo car and carb car it’s just carb looks so much cleaner

Got a link for it

I hope you put some battery corrosion spary on that because buses have the same setup and if someone forgets to spray it nothing but corroded wires you should have gotten a sealed one if you are going to put it there

So this does not delete the starter solenoid ?

Looks so good but wish you would've ran that negative around the back of the battery instead of next to the positive. Yikes! Looks great. I'm gonna do the same thing. Thanks for the advice.

Could you mount this in the car where the stock computer use to be??

I love wiring clean ups! Honestly though, any added power wiring should be fused, they sell distribution blocks/centers with built in fuses. Otherwise just use an inline fuse holder (and label it).

If you really want to have the connection block in the wheel well you could put your connections within a sealed plastic box.

I like the idea of the live wire running under there without a fuse next to the battery. Fuses are so over rated.

For safety id throw a inline fuse between block and battery just in case

I've always wanted to put a SN95 fuse box in a Fox. If I ever get a hold of a fox body again I will, I hate the factory rat's nest wiring.

How are you liking the rear coil overs vs the stock lowers?

Rip that nest out put a mafreakn carb on that jewel!!!!🤣🤣🤣🤣🤣

Let's say i get the sve 130 alternator upgrade kit, instead of running the new cable for that to the solenoid like instructed, could I run it to a block just like that?

I have fusible distribution blocks on my 85...dont know why...I don't know if my car came with them from the factory...there on my firewall...unless my car had an 8 billion watt stereo system installed once along a time.

I've never understood people that like to soup up these Ford Escorts

I need to pin this video I have one of those blocks I haven't gotten to yet. Good for reference

Would you say I have a plethora Jeffe?

What about if you hit a bump is the tire gonna bottom out

Look I agree with this but there is an issue I watched a vid of a computer/wire guru and he said that Ford's are pretty much finnicky about lengthening and shortening wires.... Like for instance it was as simple as the O2 sensor wire being too long.... U get a lot of B's on sometimes but he said something that simple made that ECM/PCM fail and showed me data.... Find it far fetched but I do believe that it's possible.... So does this hold weight or B's

Nice now all those connections won't get eaten by battery acid corrosion.

Man please get some real cable ends for the battery . Napa part numbers 728510 & 728511 have solder in them and easy to use with a little hand held torch

Alright Fox Fam, get them Thumbs up,y'all slacking....

Take the car to FoxCast Media shop , they’ll get you going in no time ..

You can pretty easily tuck the giant alternator fuse wiring in thru the fender/ front bumper, the solenoid into the fender (a bit harder with stock harness at least) the hood latch line, I have the wires to the coil coming out one of the holes in the strut tower going straight to the coil. I did that all by only lengthening 1 wire for the wiper fluid reservoir. Would be a good video to see that man

That is a good idea to have a constant power source without having 59 wires attached to the battery terminal..........just pray that you don't have a blow out right there🤣 because it may look like a lawnmower got ahold of your wires 😂 but you could put a liner back in to protect it and if you need access you can just take it off and it will be protected from the rain and shredded tire flopping around hitting your wires and cutting them or getting tangled up in them, i know that it is a 1 out of a million chance that would happen but if your luck is like mine it would happen 😂🤣😂👍🏾🚗💨💨💨💨💨💨

you ever wondered why your vise has jaws on the inside? well turn that pointy foot inwards, and use the pipe jaws for your lug. then crimp her home. youre welcome! lol

The only thing I don't like is hot connections unprotected. I'd at least want something covering that. This ( and cheapness) is why Ford puts all this crap in the bay.

Thats insane!!! You don't see the danger in the placement of the set up??? Bro you gonna have a big upset if u run something over that whips around and catches them wires like anything. Plus u can't drive it through puddles now and the grime they will now collect under there is dumb idea!! You sure picked the #1 worst placement for it. And what about if someone hits you in the side there just say its going to cause a fire and burn your car down! Hope you cary fire extinguisher!!! You gonna need it. If that were to happen you prob get sued for what you did. This type stuff here is what gots the gov trying to ban working on cars yeah the epa people are taking it all away soo. But yeah I would thing of impact and how to route your wires thsts crazy!!