TORTURE TEST: Gyeon CanCoat Evo...Surprised! 

Jimbo, the brand u r testing uses fluorine in its products. It is a forever chemical. Evil stuff to humans and the environment. Shine on you crazy diamond.

As a detailer that has applied Can Coat Evo to my wifes car, I did all the correct prep work required for any long term coating, applied by spraying into a towel as per Gyeon's instructions, coating believe it or not is at 21 months and still beading and glossy AF. Ive been adding pics and videos to an Aussie car detailing group on FB every few months. I havent sprayed all kinds of chemicals on it, its never been through a car wash, only washed by me. Ive never given it a full decon wash. This stuff is legit. Car is a daily driver that sits outside 8 to 10 hours a day and garaged overnight. Just my two cents on it. Cant get more real world than that

Thanks for the video! FYI - Sound of that blower is annoying on video

Can coat EVO is amazing. Well over a year in Florida where a car sits outside in rain and heat. “Torture tests” mean zero. The tests that work are those daily drivers and the real world elements it’s sits in not just spraying chemicals at it.

Now that you have your own product, it is better to stop this type of testing. your appearance in the presentation says enough, especially with the advertisement of your own product in between. This is no longer independent journalism.

Thx for video J Bo like the wet coat too…. Would like to see review on comp air the next thing I will buy

I had 1 car that sat outside all year and 2 layers of CanCoat lasted about 1 year and 2 months on the hood top and trunk with 4 washes a month. Side panels were good though. The other car gets parked under a car port with a single layer of CC and it's still going strong after 18 months. 2 coats of Gyeon Pure EVO on my truck looking like day 1 after a year.

i may have missed it but how was the slickness after curing?

I picked up the ryobi blower a few weeks ago. Total game changer.

Love it!

Great video buddy tfs

I just recently started watching your videos and have watched the videos you’ve made for the products I used which had been very helpful! On the other hand I haven’t seen you make videos on suds lab so if possible I would like to see you review them! They just came out with a new graphene line up that has my interest and also their older ceramic sprays!

Dry this off, let it sit a few hours, come back and inspect the hydrophobics. I bet they come back.

Spray into towel or applicator to prevent overspray on things you dont want it on.... this isnt rocket science.

As always great work keep them coming 👍👍

I would not rely 100% on torture test because I would never hit my paint work with multiple different PH level degreaser in short period of time, but at least it will give me a idea of what the coating capable of resisting. Not to mention a good coating should at least capable of resisting some popular cleansers such as APC, iron, bugs, tar, and sap remover

Thanks Jimbo Another great video . Can not hang with your Hard As Shell !!

Hello jimbo i am from france and i really like your videos espacially your torture tests. And i am agree cancoat is not a durable coating but 6 months for an easy applying product, it is grate. In europe we have hendlex spray ceramic coating and would be excited to see jimbo tortue test on it😂.

Another great video, love these, thank you!

Always a great review Jimbo

As far as durability with any product besides application variables environment plays a huge roll. Many coatings I have used clog very easily and need extra attention for this. Hence what I get in Indiana is going to be very different in a southern state. Many people don’t take this into consideration.

That blower is big pimpin 🎉

Would you paint a wall by throwing some paint at the wall and the spread it around with a roller, after? Or do you load the roller up with paint and then spread it on the wall like that?

Excellent video in my opinion as there is a difference between a spray sealant and a ceramic coating.

Can you run Jescar Ceramic Spray Wax through the torture test?

Ideal conditions when the moon is in cycle, political season around the corner, El Niño brewing in the gulf, corduroy pants with snow shoes

I love Can Coat, I wonder how Sonax BSD holds up these days

Did you allow it to dry for a week? It says on instructions that you should not use strong chemicals in a week or something.

You’re having too much fun with the ryobi blower…😂🤣👍🏽. I gotta get one.

Your testing conclusion is that Cancoat lacks durability. I challenge your testing methodology to determine durability over time then. You can easily find professional detailers who will offer it as an option above a sealant but below a ceramic coating. Those detailers generally educate their customers that the durability expectation is one year. For me your testing is of help as direction on how to best remove old previous coatings but it does not help in determining durability over time.

I cannot stand the sound of that Ryobi blower...

The blower didn't blow my mind but F me it blew my hearing....

hey Jimbo, quick question, do you know if something like Bilt Hamber Touch-Less would degrade Jimbo's Hard as Shell coating at all? I like to do rinseless washings but sometimes do a touch-less foam and rinse before the rinseless contact wash

Where do you get microfiber towels on a roll?

Jimbo, I disagree on torture tests. Real world is a much better measure of a coating.

I think what's amazing is that most of these high end spray applied ceramic coatings are getting really good and easy to install. To the point where you don't need to bother with overcomplicated vile ceramic systems that require so much thought. And these spray on coatings are so easy to install, you can apply them after every wash if you want. And for a weekend warrior...this is awesome! Love your product Jimbo!

What’s the model number of that Ryobi blower ?

6 months to 12 they estimate with Cancoat and maybe with normal maintenance washes with a PH neutral shampoo i think it will get the 6 months especially with those that wash the cars once a week .

I love your videos man. Hier is a question or 2. Can you apply 2 different ceramic coatings over another? Example Cerakote (the bad one) over gyon Mohs. I know u shouldnt but what happens when u do it? Also if you could mix it if the flashing is different. Sweating+ Rainbow. Or Sweating+ swearing. Or rainbow+ rainbow. Second question : you know the turtlewax scratch remover kit the one with the clear coat? Can i cover the whole car with the clear coat and apply over that a ceramic coating? (The thought behind would be the clear coat would act like a Lens and make the paint pop more). Also if the clear coat would get removed from the solvent from the ceramic coating. Till now asmuch as i know noone tried it atleast not on tape.

I love your no nonsense approach, and your torture test are entertaining. However, other RU-vid influencers are now torture testing your product, and yours seems to fail on their channels. Have you looked into this lol. i’ve used can coat on my personal Highway Patrol vehicle. it is still beating after a year of daily conditions in South Carolina. I have also applied it to two customer cars, a husband and a wife and their car is still beating like crazy but we must do these torture test, right? But I have now purchased your product. I put it on a customers car and waiting to see the response. But now I have watched the third influencer on RU-vid and your product seems to fail in their testing.

Hard to believe the test when you market your own product, test your equivalent products alongside other similar products

I compare can coat to only Glassparency Graphene spray or Adams Advanced Graphene ceramic spray. i have them on many client vehicles and all surpass the 1 yr and still bead and sheet water get well with a minimum of a wash every 3 weeks to 1 month. no high alkaline products on it which will obviously deteriorate any coating over time. yeah noone os spraying brakebuster and megs acid wheel cleaner on their paint ever. of course it'll fail. doing that will turn your 8 yr coating into a 1 yr coating real fast... so don't. repeated apc prewashes or waterspot remover as a mild acid are about as harsh as anyone goes. don't use anything except ph neutral chemicals unless absolutely necessary to keep your coating working great video can you do one torture test on Adams advanced graphene ceramic spray?. its solvent spray but i think its the closest thing to a real coating that's in spray form. haven't seen a torture test on it

Would love to test your hard as shell but i'm in Europe 😢

CanCoat ain't no Jimbo's. Plus it seems to clog the sprayer after each application. Something I've yet to see with Jimbo's. Like the torture test you do as it's always consistent.I like the fact that my wipe off towels don't harden up either. Not sure if that's the case for Cancoat wipe off towels.An informative video.

Jimbos still undefeated. I noticed you changed the name

Torture tests are for entertainment purposes. It's not a true representation of real life situations. Those who get their panties in a bunch should relax and enjoy the show. Oh buy Jimbos products!

First

i used original cancoat in the uk, lasted a year easily, in our shit weather and weekly washing..