toughest paint color custom blending ratio, WORKS EVERY TIME!! 

Nope no photospectrometer lol man I've been playing with these colors for almost 30 years now. I can pretty much get any color close enough to fly. Might not have 2 wings but it will fly 😂😂 and I don't get headaches bro in the big fancy shops is where my headaches and stress came from. This place is a blessing 🙏🏼♥️

I learn more with each job and watching your videos closely. One of my earliest mistakes was not giving myself enough room for a blend and ending up with a color hardline. Thanks for all these Triggerman tips and tricks.

Never in a million years would of thought of this nor have I ever seen anyone do or talk about this, trigger you are GOD SENT my brother thank you once again for spreading the knowledge man I feel like I’ve just unlocked another skill to add, hope you been well and happy my brother ❤

WoW man, that is the best metallic Job I’ve seen to date on RU-vid. That was awesome 😎 also, you’re almost at 10k subscribers brother:-)))) had to mention it ✊✊✊✊

thanks for the upload TM, good technique explained simple...,

As a painter you have to adapt to every situtuation with experiance you trust your instincts , grey metallics can be a pain so many variants nightmare . Great job man 👊

Nice work Trigger Man! This will work on my H 3 Hummer Silver Birch Metallic repaint.

Still working my blending skill 😂 thanks for the tips

Thanks for giving me the feedback I needed to hear.👌👌✌️🙏

That's a good tip.. almost a must for pastel colors too. Man ur putting em on trigger, the game is to be sold not told lol.

Great tip, Trigger. I'll use that on a blend I have next week 👍

Awesome freakin Job Trigger ❤💪👏👍🏻🔥👌💯

Thank u TriggerMan greatly appreciate u for leading th way always with incredible knowledge God Bless u💪🏽💪🏽💪🏽💪🏽

😂😂😂 Trigger turned into, Metalic Montana, at the end when he addressed the naysayers about pulling the tape.

Great job!!! Back in the lab !!!

Good to know ... reminds me when we used to wet coat the final on the old Centari jobs with highly reduced paint ... and then get ready to catch it when it starts to run ... great video as usual ...

Lol dang trigger, you got a wet bed and a blending coat going down on this one! Sheeeeeesh. All the new colors are so heavy with pearls and metallics nowdays. Use everything u can. Also blending coats are covered in the TDS sheets. Take some time to read people. Trigger dropping techniques out here yall should know already. Thanks trigger

Perfect! I just finished an all around spot repair spraying fine metallic cortez sliver and mixing 1:1 base/ Clear base and still getting a little halo. I will try this out! Thanks Trigger!!

👀👍🏽😎 nice!! 🏁🏁🏁 And another one 🔥🔥🔥

Damn bro , I swear you just had 1k followers! Good stuff my dude

I just had Chrysler " PAU". I had to watch it few days prior. 😃

Hey Trigger, how's things Brother? Brilliant video & thank you for these tips! I've never blended this way, but i am sure going to try it! I've just shown my Girlfriend this & she highly approves! 🤣🤣 Have a blessed weekend! Steve 😎🙏

Perfect blend man, great job, i can't really comment on what i do to help my blend I've only used solvent base coat about 5 times in the last 20 years, but I've been having issues with pastel greys in water base so what I'm going to take from this video is I'm going to try the transparent binder that on my system thats used for pearl coats and mid coats and mix that 2-1 with my base coat to see if it helps with the transition when blending them, i can always see where I've painted pastel colours in water base its a pig, i can't use my blender coat and mix it with the paint as its not part of my systems tinters so it won't mix with it, its a different type of material. Great video and it gave me a idea to help me out God bless man 🙏

Ive noticed that the difficult blends are colors with small amounts of course metallic. If your droplets are too small, the concentration of the metallics are different. This method definitely works for me. I try not to flick the gun too much, just lighten up on the trigger as i fade it out

Good video Been looking forward to see this blen video very useful 👍 triggerman iam still struggling with my bumper still carnt get a match and on the paint on the car people say needs a blend andy can I scuff the bumper with 800 grit da and panel wipe cover it with base coat blender and then base coat paint and clear coat paint

Beautiful job Trigger...... turned out really nice. Ive used that method a few times myself. Thats a nice looking color too

lol, still upsett about the ''pulling tape'' comment.😎😎😂😂 it was just a thought in my head bro. no knocking on your work. have a good weekend!

I tried the 50/50, but it was too much color to fade out for my skil level. I didnt get it right until i barely had color in the binder. I wasnt sure if I was doing it right but it saved me from a redo

Trigg cant pull the cars out in the sun in the UK there eint none 😂😂😂 rains that much over here we have to get round in canoes

I use to use all Walcom guns before i switched to the three Devilbiss DV1 guns and two porphis guns. I had a genesi360 light clear and 360 light base, a slìm kombat nero primer gun and the ego190 with various nozzle/cap/needle sets for the 360's and 190's they were good for the first year but just didnt last. That ego190 with 0.7mm for cerakote was tits. I was pissed when it just started leaking air everywhere and rebuild kit wouldnt fix it

I see you often with 3m 6800 full face respirator. Can you see everything when you clear? I can use full face with a sealer/ base , but i can not use it with guarantee results when clearing the panels. My vision is perfect, but I'm always missing something when I'm using full face respirator while clearing. I do a lots of white and i get tons of reflections. The best full face i tried was SATA VISION 5000. I would like hear your input , I'm sure you have tried all of it and you have a story to tell.

When you refer to a wetbed is that color blender or adhesion promotor?

Does this work for the solid funky greys?

Aye! Sorry I’m late Trigga, Still recuperating from yesterday’s heat/borderline heatstroke!!! Sheesh…

Well it's our man Trigger back in the lab😁amazing finish on this job with a perfect invisible blend, I think Brian (Paint Society) does this blending trick as well but I think he does it at a 50:50 mix, all these tips and tricks on the tinternet is amazing but we all need to take them and adapt them to work for us as we are all different👌 If I may be so bold as to ask you a question Trigger🙏I'm only able to mix my WoW primer (sealer) in grey shades so is there a trick to deciding which grey shade to mix for a certain colour🤔what I normally do is take a pic of the panel then convert it to black & white then mix my sealer to that pic, not sure if that's the best way 🤷‍♂🤔😆John UK

That Toyota charcoal is the boat I sent you with all the resprays. I didn’t do that trick. I usually just do 50/50 but didn’t on that one. Turned out alright. Not perfect. I’ll try 2/1 next time I’m blending those tricky colors.

Is there a such thing as a candy black!

I feel like I’m losing my mind cause everybody in the world blind please lord give me a sign……. A sign that’s the anthem trigger💪🏽

What do you use to record your videos while spraying?

I’m part of them old mothafu*kas 😅🎉, little bit of base I’m in the clear base is good idea! learning!

I see you Trigger now Trigger I thought the DV1 wasn't your gun of choice 🤔 just saying Trigger 😅

Excuse me Mr Triggerman, But what about those of us spraying waterborne…. 🤷‍♂️ 🫣😂