Toy Design process making of Bob designer toy

Подписаться 6 тыс.

Просмотров 39 тыс.

50% 1

Designing and 3d sculpting and designer toy using 3d printing. In this video, I am sharing my process of how I design my toys. I will start by showing the process of sketching a toy, and then we will move into digital sculpting, 3d printing, cleanup, sanding, primer and hand painting a designer toy. And finally, showcasing the final toy design.
😎 Become a Patron / karmieh
🎓 Check out my courses oasim.com/
🤖 My Designer Toys Store www.karmieh.com/
🌅 My work www.artstation.com/oasim
00:00 Introduction
00:14 Sketching toy
00:35 Digital Sculpting
01:50 3d printing toy
02:10 UV light curing 3d print
02:20 Sanding 3d print
02:40 Cleaning paint booth and primer
03:20 Checking for flaws
03:40 Sanding after primer
04:10 Airbrushing base coats
04:40 Handpainting
05:40 Presenting toy design

Хобби

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@karmieh 11 месяцев назад

I created BOB as a tribute to fathers and parents, who feel like they are carrying the weight of the world on their back and they are scared that at any moment they might fall on their knees and start crying because they don’t know if anything that they are doing is effective. There are times when you feel like giving up on life, like when you accidentally put salt in your coffee instead of sugar, and you're just like "well, this is it, I guess I'll just lay here and accept my fate". But fear not my friends, because a sip of coffee can be the magical elixir that gives you the strength to carry on! It's like a superhero transformation in a cup. One minute you're a mere mortal, and the next you're a caffeine-fueled dynamo, ready to take on the world (or at least your to-do list).

@hman2912 10 месяцев назад

Well said mate. Thank you. I literally do feel exactly like that at times. It's like you were in my head

@karmieh 10 месяцев назад

@@hman2912 Thank you, mate! Sharing our feelings, especially when down, helps us and the people around us not feel lonely. Whenever I get a message from dads and parents relating to what I had in mind when I created this fella, it fills my eyes with tears but also gives me some comfort that I am not alone. Again thank you! and much love.

@gallogiro_bribiesca 3 месяца назад

👏👏👏 talent and passion

@karmieh 3 месяца назад

Thank you so much for the kind words!@@gallogiro_bribiesca

@guillermogarduno3808 3 месяца назад

As a father this this hits!!! To dope. Will this ever be on your online shop?

@MalikChildish 10 месяцев назад

Veryyyy jealous of this video. Thank you for the motivation!

@karmieh 10 месяцев назад

I am happy to hear that the video inspired you!

@HellaDesigns 7 месяцев назад

Amazing piece!

@karmieh 7 месяцев назад

Thank you 🙏

@artist24seven1 11 месяцев назад

Beautiful work my friend! Love that you do it all from start to finish! 👍🏼👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@karmieh 11 месяцев назад

Thank you so much, buddy. Thank you so much for the kind words!

@fayyazb 9 месяцев назад

WOW! You just made it look so EASY!! So much detailed work. Awesome!

@karmieh 9 месяцев назад

Thank you so much for the kind words.

@juanp.5364 4 месяца назад

Out of control 🔥🔥🔥🔥

@karmieh 4 месяца назад

Thank you!

@oliveuk 11 месяцев назад

oh man! I knew it was some work but I had no idea it was SOOOO MUCH work!!! You are very patient Oasim and it is paying off!

@karmieh 11 месяцев назад

Oh man, it is, but what doesn't take a lot of work if you want it to be polished and clean. Thank you so much, buddy, it really means a lot.

@frankmuller3948 2 месяца назад

Amazing work! Respect for your steady hand! Bob looks awsome!!!

@karmieh 2 месяца назад

Hey Frank, thank you so much for the kind words! Bob was a lot of fun to work on!

@Gounesh 9 месяцев назад

Sir this is extremely good quality! Both the product and the video!

@karmieh 9 месяцев назад

Thank you so very much for the kind words, it really means a lot.

@TheCookieRager 11 месяцев назад

Loved this video!

@karmieh 11 месяцев назад

Thank you so very much!

@stephydeng9959 8 месяцев назад

wow~~~ we are from the toy factory, amazed by your work ! too

@karmieh 8 месяцев назад

Thank you so much for the kind words!

@landriashack2634 5 месяцев назад

Enlightening. Thank you

@karmieh 4 месяца назад

Thank you!

@jiccojicco 7 месяцев назад

This is serious art

@karmieh 7 месяцев назад

Thank you

@dimplepwr85 11 месяцев назад

Its amazing to watch a master work his craft. The world needs more inspiration like this! 😍

@pixelbudah 11 месяцев назад

You are too kind as always, thank you so very much ❤

@karmieh 11 месяцев назад

Thank you so much!! You are an inspiration to me. You are constantly pushing me to focus more on my own stuff, which I highly appreciate!

@LazerWolfTV 3 месяца назад

Amazing work 🔥 just got my 3D resin printer and can’t wait to get on this level 🙌🏼 appreciate the video process 🙏🏼

@karmieh 3 месяца назад

Best of luck in your journey, and I can't wait to see what you create! Thank you so much for the kind words.

@plantetoxique2980 9 месяцев назад

I am amazed by your skills! Unfortunately, I have trouble putting my ideas down on paper so that I can further implement them. Thank you for letting us take part!

@karmieh 9 месяцев назад

Thank you for the kind words! I totally understand it wasn't easy for me, either. Even now I still need to put an effort when starting a new project cause I get excited about an idea and then I freeze, worrying that it might not come out as good as I want to or many other reasons why I shouldn't work on it. but I think the more you do it the more you get used to just sitting down and doing the work no matter the outcome. If it's not good just move to the next one.

@RAPHIIC 9 месяцев назад

Dammmn this looks good! Awesome work!

@karmieh 9 месяцев назад

Thank you so much!

@jonnyirvine8120 3 месяца назад

Amazing work Sir love admire your Ch. 🙏

@karmieh 3 месяца назад

Thank you sir for your kind words, really mean a lot.

@studiomunzi Месяц назад

This is Amazing Bro

@karmieh Месяц назад

Thank you

@dianakarklina4298 2 месяца назад

I aspire to get to your level of craft! This video has been very enjoyable and informative. Would it be possible to ask how do you approach your sanding process and what grits of sandpaper to you use? 👁️👁️

@karmieh 2 месяца назад

Thank you so much for your kind words. For sanding if I am doing wetsanding then I would start at 400 grit and then 600 grit I rarely use 1000 grit, but if I use scratch pads I start with Fine to ultra fine.

@emmamarx9284 Месяц назад

Amazing process!! You are truly a legend!! One critique tho, You should be wearing at least a dust mask when sanding resin, it’s really really really bad for your lungs, any kinda fine dust puts you at high risk for a ton of respiratory health problems including lung cancer 😢 I just want you to be safe so we can enjoy your work and guidance for years to come 🥺❤️

@karmieh Месяц назад

Thank you, Emma, thank you so much for thinking of my health :D and yes I agree! I always (well not always) but if I have long sanding sessions I wear heavy duty dust mask, but when I record I don;t always, cause the recording session for sanding they are maybe 10-15 minutes and I have to move and change the camera angle or adjust something else and it becomes annoying :D Again thank you for your kind words and for being such a kind human!

@thbugstudio 9 месяцев назад

wow!!!

@karmieh 9 месяцев назад

Thank you so much 🙏❤️🙌

@Juansolo23 9 месяцев назад

Genial!!

@karmieh 9 месяцев назад

Thank you so very much!

@kyounokuma 3 месяца назад

OMG, So friggin nice! This is a great toy. You are my hero. Thank you for sharing. I'm learning a lot from you. Wishing you all the best with your journey, bro. Liked and sub'd.

@karmieh 3 месяца назад

Thank you so much for the kind words! So happy to hear that! Thank you!

@nicolajesteban9211 8 месяцев назад

first I thought "this is lame, no sound, no hectic cutting, ..." but then at the end I realised I watched the whole thing with more focus I've ever watched a youtube video haha :D this is beautifully made

@karmieh 8 месяцев назад

Ha! Love your comment, thank you so much!

@MVARTZ 5 месяцев назад

Amazing! I can only aspire to be this good, what a clean toy that is. Do you have a video going over your clean up polish process. You know what tools to use and such. Btw I just got the course on separating and keying your models. Hope to find time to do one soon 😊

@karmieh 5 месяцев назад

Thank you so very much! I am so happy that you enjoyed it. I don't have a video like that, but I plan to do a couple where I go into details about paints, primers, tools, etc. Thank you so much for getting the course, I really hope you find it helpful!

@wildguardian 9 месяцев назад

Awesome video.. loved the design, very well finished. As someone who is starting at this.. I'm curious about the primer you use.. that allows it to be sanded after appllied. seems a perfect method.. so you can remove layer lines and fill support holes then sand any problem out.. is it a special one? Does any primer for miniatures works?

@karmieh 9 месяцев назад

Thank you so much for the kind words! Lately, I have been using Mr. Surfacer 1500, it works really well cause it also is a filler. I have used different ones before, from AK, from RP, but I think this is the best one so far.

@RCrdro1 3 месяца назад

So cool man! I love the message you wrote about why you created Bob as well. Do you do any custom pieces? I would love to get one made of my French Bulldog. Please let me know. Thank you

@karmieh 3 месяца назад

Thank you so much! Yes, I do custom pieces, would love to make a french bulldog. Feel free to email me: oasim@karmieh.com so we can discuss further

@silviamancini91 8 месяцев назад

Oh wow AMAZING! super cool video. thank you so much! the ultrasonic cleaner is this usefull to clean the surface when you remove the supports? why do you use it? how it works? i have eleggo mars P. great Toy!

@karmieh 8 месяцев назад

Thank you for the kind words! The ultrasonic is really helpful in cleaning the parts so making sure no resin is left on the piece, and at the same time while it's cleaning it heats up so when you remove the support they snap off really fast and clean without damaging the piece of having to cut the supports and have them fly all over. I am so happy that you like the piece.

@loffel1058 3 месяца назад

What 3D printer do you use? It looks so good

@karmieh 3 месяца назад

I use a Form 3+ thanks!

@arcopattiwael2443 9 дней назад

Hi Oasim, great work and thanks for being inspirational! I have a question. For mass production, do u print all of that part using your 3d printer or with resin casting? Thank you

@karmieh 4 дня назад

Thank you so much for the kind words! It really depends on the run, if I decide to make a limited edition of 15-25 pieces I'll 3d print all of them, if I make runs of 30+ then I always hire a casting studio to help produce them, sometimes I'll have them cast in blanks and hand paint each one, it really depends on the project.

@plasticki6287 8 месяцев назад

Really enjoy watching the process, may I know what software you use to design the joints for the 3d model ?

@karmieh 8 месяцев назад

Thank you! I use ZBrush for all my 3d modeling, sculpting and 3d print prep, keys and joints.

@axellim3307 10 месяцев назад

Enjoying the process! Is that printer from Creality or Anycubic?

@karmieh 10 месяцев назад

Thank you so very much. Happy to hear that! The printer is a Form 3+

@axellim3307 10 месяцев назад

Appreciate your response! After looking at the price, it seems quite expensive. Are there any good alternative options, possibly in the mid-range, that beginners could use for experimenting? @@karmieh

@karmieh 10 месяцев назад

@@axellim3307 From what I have heard, Anycubic is the best budget resin 3d printer. I haven't used it so I have no way to know for sure. The Formlabs printers are expensive, especially when starting out. Before the Form 3+ I owned a MOAI 130 laser printer and it was a very good printer, I think it was around 900-1000 USD but that was like 5 years ago.

@jeifury 10 месяцев назад

Hi,@@karmieh. Is there a specific type of resin you use on these toys?

@karmieh 10 месяцев назад

Hey, I use Grey formlabs resin formlabs.com/store/materials/grey-resin/ @@jeifury

@tooniemmanuel1925 11 месяцев назад

Awesome! What material was used to print the toys ?

@karmieh 11 месяцев назад

Thank you! The material is resin. 3d printed on a form 3 plus, using grey resin.

@andrewkleist9579 7 месяцев назад

@oasim Great work! What varnish/finish did you use to get this satin look?

@karmieh 7 месяцев назад

Thank you so much 🙏 the varnish I used for this piece is Vallejo Spray 400 ml - Satin, the Matte and glossy are also great. I have been using those for about 7 years now

@andrewkleist9579 6 месяцев назад

@@karmieh Awesome - appreciate it! I haven't used their satin yet but I have used their matte in the past. Will keep it in mind for the future.

@karmieh 6 месяцев назад

Happy to help!@@andrewkleist9579

@user-wy9uf5qp1x Месяц назад

Can you tell me what kind of devices you use? What is necessary to make such a figurine?

@karmieh Месяц назад

Sure, 3d printer, UV curing booth, I use formlabs Form 3+ and cure from formlabs as well, you need sanding paper, scratch pads and paint I use paint from Vallejo, mr.hobby and Tamiya and if you a sander you can Dremel or a linear sander, the one I have is from a company called proxxon. Hope this helps

@astrona77 2 месяца назад

Amazing work! What kind of paint do you use?

@karmieh 2 месяца назад

Thank you for the kind words! I am using MR Surfacer for the primer and Tamiya and Mr hobby and Vallejo for paints.

@astrona77 2 месяца назад

@@karmieh Thanks! Since acrylic paint is water based, does it rub off with wetness? Do you have any issues with it binding or are you sealing it in somehow?

@karmieh 2 месяца назад

@@astrona77 It doesn't rub off, and I don't always seal my pieces. It really depends on the paint and look that I am going for. You just have to make sure to work with thin layers of paint and leave it to dry properly.

@astrona77 2 месяца назад

@@karmieh Thanks for the tips! Really looking like your channel is about to boom in popularity! Keep up the great work!

@karmieh 2 месяца назад

@@astrona77 Glad I could help! Thank you so much :D

@luxiligan9710 10 месяцев назад

I hope u can share what sanding machine u r using

@karmieh 10 месяцев назад

Sure thing. The sanding tool is a Linear sander. It's from a company called Proxxon, you can check it out here. www.proxxon.com/en/micromot/28594.php If you want to see more behind the scenes, get free STL each month, tutorials and help me create more videos like this you can check out my Patreon page. www.patreon.com/karmieh

@luxiligan9710 10 месяцев назад

Thank u!@@karmieh

@GrantJenkins 10 месяцев назад

how do you get the paint to look so matte?

@karmieh 10 месяцев назад

Once I finish painting the base colours, I seal the paint with Acrylic Matte or satin varnish depending on the look that I am going for. the varnish is available in Satin and Gloss craftelier.com/en-ie/vallejo-acrylic-matte-permanent-aerosol-spray-400ml.html

@brunosequeira8648 6 месяцев назад

hello there. new follower here. great work. can I ask how you did the NASA "logo"? thank you

@karmieh 6 месяцев назад

Thank you for the kind words, for the Nasa logo I used Waterslide Decal Paper for Laser Printer, I have tried the inkjet printer ones but those didn't work, maybe it was the type of paper.

@MultiHeheboy 4 месяца назад

How you did eye? And how it's so shiny.

@karmieh 4 месяца назад

I forgot to record when I painted the eyes, but I usually start with white and then add the iris and finally the pupil; as for the shiny part, after the paint dries, I apply a glossy clear coat.

@MultiHeheboy 4 месяца назад

@@karmieh Love ya.

@karmieh 4 месяца назад

Lots of love :D@@MultiHeheboy

@GutterFunk420 Месяц назад

What 3D app your using bro?

@karmieh Месяц назад

I use ZBrush for all my sculpts.

@anthonyr.3799 4 месяца назад

3m scratch pads,

@karmieh 3 месяца назад

Thanks 👍

@Sinap1996Mnl 6 месяцев назад

WHAT CREATOR APPS IS THAT?

@karmieh 6 месяцев назад

I use ZBRUSH for sculpting

@kasperia5259 11 месяцев назад

what is that sanding tools name ?

@karmieh 11 месяцев назад

The sanding tool is a Linear sander, it's from a company called Proxxon, you can check them out here. www.proxxon.com/en/micromot/28594.php

@kasperia5259 11 месяцев назад

@@karmieh thank you so much

@karmieh 11 месяцев назад

Happy to help@@kasperia5259

@Ilkudov 3 месяца назад

Is the program name Blender or Thinkercad? Can you say exact the program name please?

@karmieh 3 месяца назад

The software is called ZBrush

@Ilkudov 3 месяца назад

@@karmieh after printing, you put the pieces of scuplture into water. What's kind of water that?

@karmieh 3 месяца назад

That is not water after printing you have to clean the 3d printed pieces in Isopropilic Alcohol@@Ilkudov

@Ilkudov 3 месяца назад

@@karmieh what kind of dyes do you use after Isopropilic Alcohol?

@karmieh 3 месяца назад

I use Mr Surfacer for primer and for paints lots of different companies Tamiya, Mr Hobby, Vallejo, MRP mostly are acrylic paints but I also have used enamel and paints out of spray can @@Ilkudov

@massimoequilibrio3049 2 месяца назад

artisr

@karmieh 2 месяца назад

Thanks!

@ttmmaacc 11 месяцев назад

Are the joins called "Keys"? ..Would love to see/buy a full Bob sculpting tutorial!

@karmieh 11 месяцев назад

Yeah, they are called keys, well at least, that's what I call them. I am working on a couple new tutorials one of them is the whole process of sculpting Bob, but you can check out some of my other tutorials ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ycwv1jQnEqQ.html and also I have a patreon page where I release STLs and tutorials before launching them on my website or channel.