Тёмный

Toy Gun ASMR - SIG 552 +ADV Brushless motor+ Jefftron ETU - AEG 

4UAD SmartAirsoft
Подписаться 90 тыс.
Просмотров 67 тыс.
50% 1

#toygunasmr #sig552 #aeg #玩具維修保養系列
If you like these videos, Plz using【🤍Thanks】A tiny support do really help us create more
如果喜歡這類的影片,請按下【🤍超級感謝】用一點點的心意,支持我們繼續創作👍🏻👍🏻
Click here for subscribing our awesome stuff► / @4uadsmartairsoft
Short Cuts/ 懶人包&捷徑
0:00 Unboxing / 開箱
1:01 Sponsors / 乾爹們
1:43 Taking the SIg 552 Apart / 拆解SiG 552
4:11 The SIG gear box / Sig 齒輪箱
8:43 Jefftron Sticker Tips / Jefftron 貼紙教學
11:11 Clicker Spring installation / GBB扳機觸感彈簧安裝
12:56 Installing Jefftron Trigger board / 安裝Jefftron 電子扳機
19:31 Swap out Gear Bushing / 原廠軸承拆除
21:01 Gear shimming / 齒輪墊墊片
24:40 Installing Piston / 活塞安裝
31:37 Closing the Box / 完成齒輪箱安裝
38:07 ADV Brushless Motor installation / ADV 無刷馬達安裝
40:34 Rail and Barrel Assembly / 護木與槍管安裝
45:20 RGW Suppressor Installation/ RGW 消音器安裝
45:45 Final Test /完成後試槍
46:49 Mag Dump / 簡易下場射擊測試
If You Don't Wanna Miss Any important informations, Follow Us On :
Facebook ► / 4uadsmartairsoft
Instagram ► / 4uadsmartairsoft
Our New Arrival ► store.4uadsmartairsoft.com/
And note:
All the replicas shown in the video are legal products produced by legal manufactures.
The purpose of this video is to educate users the appropriate attitude and mindset towards operating and owning such products.
No parts and Modifications shown in this video will produce results which will render a replica illegal.
Airsoft replicas are not weapons, airsofts replicas are recreational sporting equipment for recreational purposes.
Airsoft are not firearms.

Развлечения

Опубликовано:

 

4 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 117   
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
👇Sponsor & Any Good Stuff👇 👇影片裡的好東西在下方連結👇 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒 Special Thanks: ➤ KWTRC TECHNOLOGY CO., LTD.www.jefftron.net/: Affordable fool proof brushless motor? go find them! 🛒 www.adv-airsoft.com/h/ServiceDetail?key=mgcfj&cont=318021 ➤ Jefftron: For some nice E trigger unit Jefftron could be an option 🛒www.jefftron.net/ ➤ ICS Airsoft: Nice V3 quick spring change gear box! 🛒 icsbb.com ➤ GBL Airosft: They make some great upgrade parts 🛒Goods : facebook.com/groups/238971807219818/ ➤ACETECH: you guys do make some amazing tracers and chrono and Targets 🛒Goods : www.acetk.com/ 🛒 Amazon Goods : amzn.to/3sr5I2n ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! 🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
@montazerahmed23
@montazerahmed23 Год назад
ما هذا الهراء انا اسأل سوأل
@user-lt7xk7qw8e
@user-lt7xk7qw8e 6 месяцев назад
love his work,
@tacticool_weeb8450
@tacticool_weeb8450 Год назад
My best friend growing up had one, it introduced me to sigs… I don’t even know if Evans still alive anymore
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Yah this one is out of production and I really wish I can get the mid cap mag for itv
@Theloganatomic
@Theloganatomic Год назад
552/553's are absolutely my favorite rifle i ran my ics through 2 gearboxes... wish i still had it
@pingpong808
@pingpong808 11 месяцев назад
Love it! I tech/build my own guns, also for friends and clients, but I still love watching other people do builds, seeing their take on things, techniques, tools, etc.. Please keep the AEG’s coming! Thanks
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
Building airsoft guns is like my zen session, and thanks for the love man! I love building airsoft stuff!
@3runelli
@3runelli Год назад
\o/ yeah, super cool AEG, i lov this model! And about the work I don't even need to comment, you are the best!
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Thanks man, it was fun working on this project and the 48 minute video was actually 13 hours of work hahaha. But thanks for the support~ comments like this makes though work like nothing
@cedsoe2866
@cedsoe2866 11 месяцев назад
Thanks for asmr😂
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
Anytime :D
@youngtony2375
@youngtony2375 Год назад
He's good at assembling guns
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
I’m not that good trust me haha I took time
@jornmusseler6483
@jornmusseler6483 3 месяца назад
nice job, greetings from germany! thumb up
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
Thanks man
@Tacticalboredom
@Tacticalboredom Год назад
I'm counting down the seconds 🙏by far the 2nd coolest gun you've done, topped by the rocket launcher. :)
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
This one was a hard one to build haha
@4nson_
@4nson_ Год назад
full auto beast
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Indeed
@rustegothebuilding
@rustegothebuilding Год назад
Next the GHK
@manhinho910
@manhinho910 Год назад
For me gbb is much more fun and easy to work with
@quocthanhtran5199
@quocthanhtran5199 Год назад
“It’s perfect”
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Thanks Bro!
@TK7837
@TK7837 Год назад
A work of art, I think the brushless motor made it work better than just a normal motor. Love the sig but the mags put me off, more expenses when you have loads of M4 mags🤦 that first motor worked well 🤣🤣
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Yah this one is more of a collector piece now since I can no longer find after market parts and mid cap mags for it
@gdarcyie
@gdarcyie Год назад
There is a 3d printed adapter that lets you use standard M4 mids available
@reyarvillar3249
@reyarvillar3249 Год назад
Pagka gwapo sa airsoft unit ni
@MargiAirsoft
@MargiAirsoft 11 месяцев назад
Although I went with G&G's rendition of the 552, I think ICS' is more clever in its design and the ability to root the wires directly from the gearbox to the front part of the gun, unlike G&G, is a good thing. I found this build to be rushed but still enjoy watching them
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
haha thanks for the love man, I wish I can find some midcaps for this one, but sadly they are all gone
@MargiAirsoft
@MargiAirsoft 11 месяцев назад
@@4UADSmartAirsoft I don't know if they are compatible with ICS but I purchased some MAG mags. They do fit the G&G with a little filing on the front but they don't stay locked 100 %. They are still prone to slipping out of the magwell if you don't leave them alone or if they bump against a wall for instance. Maybe a way to explore if those are available in your area ?
@pa86_
@pa86_ 3 месяца назад
​@@MargiAirsoft I can confirm MAGs work with some minor modification of the catch on the magazine. Been using them since i got my ICS 552.
@timothyshroder7737
@timothyshroder7737 Месяц назад
Do you know where i can get that gearbox shell? Also, will the upgrades work if i just used my stock gearbox?
@robsorgdrager8477
@robsorgdrager8477 Год назад
I have not been a big fan of the optical sensor style MOSFETs. To be honest most the brushless motors have a simple speed controller built in and putting a MOSFET in the mix could induce voltage issues that make the rifle act unsavory. I did a build for this season of play using a m249 , warhead and perun . I did not like the lack of reliability and it was picky, very picky about what battery to use and if it dropped below a certain voltage it would go into protect mode. I swapped all the digital stuff out and am currently building a 16:1 single sector using a brushed 40k infrum motor and a burst avocado. I should be able to play all day on a 9.6 with around 28 rps .
@ebehdzikraa3855
@ebehdzikraa3855 11 месяцев назад
My dream gun. But after seeing how nightmare working on it, i recede my intention of owning it. It checks all of things that I hate working on this particular gun: - complex ambi selector, both internal and external - proptietary spring in the trigger - forward wiring Nice gun though
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
not going to lie~ its a real pain in the ass
@guriairsoft
@guriairsoft Год назад
these old SIG from ics are really astonishing, thats a shame ics no longer make those anymore , still looking for midcaps for mine ...
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
I know how you feel man, I'm on the same boat on finding mid cap mags
@guriairsoft
@guriairsoft Год назад
@@4UADSmartAirsoft yeah , i tried G&G ones, but need some modification ... is not the same thing as the original ....
@jorgeemidio7507
@jorgeemidio7507 Год назад
Imagine If they had m4 mag compatibility :(
@pa86_
@pa86_ 3 месяца назад
​@@4UADSmartAirsoftMAG brand midcaps work. You only have to shave a couple mm from the catch on the mag to work. I use those on my 552.
@Theloganatomic
@Theloganatomic Месяц назад
Returning to this video cause its so unbelievable hard to find one of these for sale on the used market and it makes me sad
@4UADSmartAirsoft
@4UADSmartAirsoft 13 дней назад
yah man I can't even find midcaps for it
@pilerheritage
@pilerheritage 9 месяцев назад
Good job! I am trying to modify a Retro Arms CNC shell to fit my ICS. Gate Aster as well. It is quite the project 😫 Update: I got it to fit after having to grind off half the shell. Now it’s having feeding issues and the titan keeps throwing random codes as well. Probably cursed.
@VISITORVENUDAILLOR
@VISITORVENUDAILLOR 8 месяцев назад
want a ghk 552...
@4UADSmartAirsoft
@4UADSmartAirsoft 8 месяцев назад
Will try to get our hands on one!
@Live1509
@Live1509 Год назад
The delayer seems mounted wrong. You don't want to anticipate the opening of the tappet plate but delaying the closing. 🧐 I also won't reccomend to put ball bearing in the piston head because it will add weight, a spacer made of Delrin will have the same function for less weight. Another think to consider is filing down the third tooth for 2/3 of the lenght with a 45° angle.
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Dude sounds like some good advise man, I will try those out for sure! Thanks for the tip really appreciate it!
@ebehdzikraa3855
@ebehdzikraa3855 11 месяцев назад
I have some issues with delayer. It open the nozzle before piston finished its forward travel. Resulting in huge fps loss. Therefore, I cut the forward part of the delayer and leave the end part intact. Thus, it only delay nozzle closing but not prematurely open the nozzle.
@josevaldez8665
@josevaldez8665 3 месяца назад
Hello, I have a question. I have a sig sauer 552 commando. I want to ask if you can tell me where I can buy the parts through the web. I live in Italy or where I could send it to obtain those improvements.
@agostonvona7526
@agostonvona7526 5 месяцев назад
I am planning a very similar tuning on my own 552 in the near future. Could you tell me where you got the 11:14 "clicker spring" from? Also, I learned a lot of new things from your video! You make particularly demanding and relaxing videos! 11:33
@4UADSmartAirsoft
@4UADSmartAirsoft 5 месяцев назад
Thanks man! That came with the jefftron ETU
@geraldooliveira3811
@geraldooliveira3811 Год назад
Another beautiful work. A quick question: why did you shim the spur first? An honest question, just trying to learn!
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Part of the reason I did that first it’s because when it come to electric trigger unit I want to keep my spur gear as low as possible, this way I would have more space to adjust the sector gear, and as for the bevel gear I would push it towards to the pinion gear first assemble the whole thing and see if I like the sound, and if it sounds terrible for a second I will take the whole thing apart and adjust the pinion gear height. Hope this helps :)
@geraldooliveira3811
@geraldooliveira3811 Год назад
@@4UADSmartAirsoftThat really helps, and I will definitely try that next time I open my AEG. I appreciate you taking the time to reply. thank you.
@halo-cn3ku
@halo-cn3ku Год назад
Awesome and I’m curious what company made the Sig you upgraded.
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Starts with an i
@halo-cn3ku
@halo-cn3ku Год назад
@@4UADSmartAirsoft I was just thinking it might be an ICS.
@ksa9vvjxpignc7xr56xv
@ksa9vvjxpignc7xr56xv Год назад
I want to watch it without BGM. Please upload no BGM version.
@jzarlenn
@jzarlenn 11 месяцев назад
Do you have a video on attaching a rail to an AK Dust cover?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
We can see if we can get one going :D
@jzarlenn
@jzarlenn 11 месяцев назад
@@4UADSmartAirsoft please!!! I have AK's that needs some rails... Have you thought about using 3d printed attachments on your airsoft? the ones you print yourself?
@AmateurCaptain
@AmateurCaptain 8 месяцев назад
Really want this ics sig but I think the lack of mid cap mags out there is a bit of a dealbreaker for me.
@4UADSmartAirsoft
@4UADSmartAirsoft 8 месяцев назад
Yah man same here…. I still can’t find the mid caps
@pa86_
@pa86_ 3 месяца назад
MAG brand midcaps. Minor modifications required tho.
@lorismasiero6431
@lorismasiero6431 3 месяца назад
where do you fond the gb QSC ??? it s not on ics web site... Please a link
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
This one I got it before they stopped the production
@user-ot7kp4vj7u
@user-ot7kp4vj7u 5 месяцев назад
I'd love to buy your products. Perhaps someone can tell me who stocks them in the UK.
@user-ot7kp4vj7u
@user-ot7kp4vj7u 5 месяцев назад
Just gone direct to 4UAD via a link above and bought a few different lubes. I watched a great vid of the AAOP1 upgrade and build. I'd like to know where those parts are available...
@556nato_negev
@556nato_negev Год назад
aww GBB Next time?
@aaron4820
@aaron4820 Год назад
Yeah thought this was gonna be on the little talked about GHK SIG552... aww indeed lol
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
Soon we have some interesting ones coming up next
@556nato_negev
@556nato_negev Год назад
​@@4UADSmartAirsoftok i wait. XD
@GabrielLopez-ic5vh
@GabrielLopez-ic5vh 2 месяца назад
bro en que pagina web puedo comprar las armas que enseña este crack ?
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
Sorry man this one is out of stock
@iceboy1053
@iceboy1053 2 месяца назад
Is it okay to use Brushless Motor with ETU?
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
Most of them now days do work with brushless now
@arvo_septus
@arvo_septus Год назад
Did the gear on the motor break off inside the gun?
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
The motor shaft broke…..
@michaelrohrs8
@michaelrohrs8 10 месяцев назад
Where can I purchase this sig 556 ?
@4UADSmartAirsoft
@4UADSmartAirsoft 10 месяцев назад
not sure to be honest since its out of production, but I think cyma might still have some. Good luck!
@CherrypieAndal-xd8cv
@CherrypieAndal-xd8cv 11 месяцев назад
Ah sir how much if I buy this from you? I'll purchase it even if it's second hand.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
haha thanks for the love but this one is not for sale :D
@Nicolas-bo9ps
@Nicolas-bo9ps Год назад
你这样调gearbox,问题蛮多的,首先一个就是伞齿,需要先与电机之间调整咬合间隙,而不仅仅是在变速箱内调整,第二个就是你使用的延时器型号不当,会造成诸多问题,例如推弹嘴无法归位,auto档位降低初速(因为这个形状的延时器会造成提前解锁推弹嘴)
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
如果大哥不介意看13個小時的ASMR 我很樂意讓哥看調整的過程:),但感謝大大的提醒~如果大家覺得48分鐘可以調好還能順順打~~這都是幻覺不是真的xD
@T0578702
@T0578702 Год назад
工法不同~手法就不同....別把你的觀點去看人...全世界arg/GBB係技術向 RU-vidr各個都不同 先去把日 韓 美 歐 東南亞各個技術向 RU-vidr看過一輪再來說:)
@Nicolas-bo9ps
@Nicolas-bo9ps Год назад
@@T0578702 ???你看不出来最后连射的时候扫齿了吗?
@kionmkionm
@kionmkionm Год назад
大大你好 这个的拉机柄不能够跟着联动回膛吗?
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
要是能我可就開心壞了
@kionmkionm
@kionmkionm Год назад
@@4UADSmartAirsoft 哈哈哈,因为我个人比较喜欢玩电枪,而且我自己改的电枪bolt机片是能够回膛和无弹后定😂
@IGET2MAIL
@IGET2MAIL Год назад
請問鋸螺絲的 工具叫甚麼?線鋸嗎
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
珠寶線鋸,專門切割金屬。 會用的話可以做很多東西喔。珠寶材料行就有了,這把我從高中用到現在:)
@supersonicboom4990
@supersonicboom4990 3 месяца назад
What brand is this gun ?
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
Ics
@eljfica
@eljfica Год назад
And now build AEG with such a expensive part no point you pay like 130€ for motor, gears like 30+ leviathan(or gate 150+) will cost you 100+ , piston set like 20+ if cheap and some time you will buy aluminum gearbox 100+, why? Or just buy hpa 400 and you got reliable gun with high rps instant trigger response and silent, and on AEG if something will brake you will pay even more total 💰💰💰
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
That’s part of the fun, it’s like why bother using HPA when you can hop on your computer and do some FPS games? It’s even more accurate isn’t it?
@pingpong808
@pingpong808 11 месяцев назад
High speed built AEG’s can be very reliable if built right with proper parts, and not abused like constantly dry firing. I built quite a few 12:1 and 13:1 400-440 fps guns and have put thousands upon thousands of bb’s through each of them with no problems. But like 4UAD said, the build is part of the fun.
@emotiondamn1079
@emotiondamn1079 Месяц назад
I use google to translate. I have a sig sg 552 (Airsolf gun) that I received from my brother. But it doesn't have a magazine and battery. I live in Thailand. Can you send it to me if I order?
@4UADSmartAirsoft
@4UADSmartAirsoft Месяц назад
I’m sorry man it’s not going to work since it’s out of production, I don’t have it either
@emotiondamn1079
@emotiondamn1079 Месяц назад
Thank you
@derbeste4400
@derbeste4400 2 месяца назад
can I buy it?
@4UADSmartAirsoft
@4UADSmartAirsoft 2 месяца назад
Nope it’s out of stock
@montazerahmed23
@montazerahmed23 Год назад
ما هو اغلى واقوى بندقية في العالم هل يوجد فاعل خير
@LeagueCritic
@LeagueCritic Год назад
what is the orange magnetic dish at 20:00 ?
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
It’s a pin puncher
@luiswen9437
@luiswen9437 Год назад
It’s a pin punching pad, and it’s not magnetic
@LeagueCritic
@LeagueCritic Год назад
@@luiswen9437 link? cant find it
@kirihikoazuma8045
@kirihikoazuma8045 11 месяцев назад
I don’t think people should refer to Airsoft guns as Toys since they can hurt, injury or worse a person same with Airgun / Pellet Guns.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
Why people refer airsoft guns as real guns? They are different too….
@youngtony2375
@youngtony2375 Год назад
Are you a Chinese RU-vidr?
@T0578702
@T0578702 Год назад
No it's TaiwanRU-vidr not mainland China
@4UADSmartAirsoft
@4UADSmartAirsoft Год назад
I don’t think I’m at the level to be called RU-vidr. I’m dr. Nobody lol
@eljfica
@eljfica Год назад
Come on man, 2023 and you still use full 14 metal tooth, you don't build dmr and if something will go wrong you will break expensive gears not a 5€ piston
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
And yet it still works~ any suggestions genius?
@user-ey9eh7wc2q
@user-ey9eh7wc2q 11 месяцев назад
Could you tell me which company is the product of SIG?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 месяцев назад
ICS, but it went out of production. I think cyma still have those
@user-ey9eh7wc2q
@user-ey9eh7wc2q 11 месяцев назад
@@4UADSmartAirsoft Thank you for your answer
Далее
Incredible magic 🤯✨
00:53
Просмотров 4,6 млн
FARUX RAIMOV AVJIGA CHIQDI - JAVOHIR🔥
01:01
Просмотров 916 тыс.
КАКОЙ У ТЕБЯ ЛЮБИМЫЙ МАРМЕЛАД?
00:40
Making another pickproof lock (but better)
15:14
Просмотров 2,9 млн
Firearms Expert Reacts To Rust’s Guns
18:26
Просмотров 6 млн
Modeling a character BaseMesh in Blender (Tutorial)
2:28:21
Toy Gun ASMR - GHK G5 + SRU Bullpup kit
39:43
Просмотров 68 тыс.
Mike Glover Returns - Danger Close with Jack Carr
2:59:45
Firearms Expert Reacts To Isonzo’s Guns
24:02
Просмотров 797 тыс.