Тёмный

Toyota Camry Major Oil Leak 

briansmobile1
Подписаться 456 тыс.
Просмотров 131 тыс.
50% 1

This Camry with 130k miles came in leaking from the back of the engine. There was sign near the top around the valve cover all the way down to the oil pan. The timing belt was soaked in oil as was everything in the timing cover.
Products used & referred to in the video↓
Gray gasket maker → amzn.to/2CtW8Qy
Indexing pry bar “hero tool” → amzn.to/2CvGVPj
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Jafromobile Engine Coating video → • Oil-Repellent Coating ...
Disclaimer:
DO YOUR HOMEWORK before making a decision based on information you find on RU-vid, or anywhere else when it comes to your car, the environment, or your safety.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and respiratory protective devices when working on vehicles and or with tools seen or implied in this video.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling empowered! And if nothing else, perhaps you had a laugh and were entertained!

Авто/Мото

Опубликовано:

 

30 дек 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 123   
@briansmobile1
@briansmobile1 6 лет назад
They Goods... as promised. Gray gasket maker → amzn.to/2CtW8Qy Indexing pry bar “hero tool” → amzn.to/2CvGVPj Pull a Part Challenge Episode 3 → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Fu4V9I8i6mU.html Jafromobile Oil-repellent Coating → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hw-4Lx353Fs.html
@Muhyedinschannel
@Muhyedinschannel 3 года назад
What is that small pipe sticking out where you are just fixing it my 2005 Toyota Camry kick out to the ground one like that and severe oil leak and oil pan gasket is wide open an leaked all oil down please help
@lyricrylan185
@lyricrylan185 2 года назад
you all probably dont care but does anyone know a trick to log back into an instagram account? I somehow forgot my account password. I would love any tips you can give me.
@wilderlogan5879
@wilderlogan5879 2 года назад
@Lyric Rylan instablaster =)
@lyricrylan185
@lyricrylan185 2 года назад
@Wilder Logan thanks so much for your reply. I found the site through google and Im waiting for the hacking stuff now. Seems to take a while so I will reply here later when my account password hopefully is recovered.
@carlmiller1034
@carlmiller1034 6 лет назад
Great explanation on why and where the oil was leaking from. And great points on what happens if you let your oil go too long between changes. Excellent video Brian!
@billyyoder8171
@billyyoder8171 6 лет назад
Happy New year Brian to you and your family. Thank you for all your videos.
@dfw_motorrad1329
@dfw_motorrad1329 6 лет назад
Jafro shoutout!!! Super quality channel. Highly recommended.
@briansmobile1
@briansmobile1 6 лет назад
Absolutely!
@trued2010
@trued2010 6 лет назад
Ive already seen the jafromobile videos, Its interesting to watch him prep and put the coating on, The interesting part was when he sad it takes a really long time for that stuff to gas out. He also did some test with solvents and cleaners to help identify whats gonna kill the coating. He found a lot of stuff that will kill it too.
@st_us
@st_us 6 лет назад
Having worked on hundreds of cars in Europe, I have yet never Seen an oil pump on the timing belt System. Thanks for showing interesting stuff.
@wyattoneable
@wyattoneable 6 лет назад
Your one of the best Brian. I always forward to your videos. Have a safe year.
@blairguinea6811
@blairguinea6811 6 лет назад
Nice video Brian.........can watch this for ever especially your episodes thanks and A Happy New Year to you and all your eager viewers
@alexanderbarr
@alexanderbarr 6 лет назад
Loved watching jafros videos on glyptal installation and testing. His videos are always fun to watch.
@briansmobile1
@briansmobile1 6 лет назад
He's awesome!
@geologic740
@geologic740 6 лет назад
Well done, Brian. Happy New Year!
@richieschmidt6225
@richieschmidt6225 5 лет назад
For anyone else doing this job, you may have noticed it’s a PITA to get that spaghetti gasket to stay on the block while you install the oil pump cover. What I did was liberally apply petroleum jelly (Vaseline) the the galley in which the gasket sits, and then i pressed the gasket into place and it stayed long enough for me to install. No issues so far, and IMO cleaner than RTV for future maintenance. Good video though as usual, Brian!
@bdrichardson403
@bdrichardson403 6 лет назад
Great info! We just bought an '03 Camry that doesn't leak now but I'll know what to do, thanks to the Super B.
@mostlymoparih5682
@mostlymoparih5682 5 лет назад
Thanks this video saved me the time of finding the oil leak on my son's 89 Camry. I changed the timing belt, idler pulley, tensioner, and water pump while I was in there. That right side motor mount with 47 pieces was a real pita so I didn't want to have to go in there again. Thanks again. Great video.
@briansmobile1
@briansmobile1 5 лет назад
Welcome!
@cossee
@cossee 3 года назад
Excellent video very helpful. Cheers
@spelunkerd
@spelunkerd 6 лет назад
Another excellent video, Brian. I've only seen one high pressure oil leak before, this one adds to the list. What version of RTV are you using when the seal is between steel and aluminum, or steel against steel?
@kengamble8595
@kengamble8595 6 лет назад
Yeah, believe you earned an atta boy on this ! 😊👍 Thanks for sharing and take care.
@hunting447
@hunting447 6 лет назад
Diagnosed one of these today. Same problem haha every time I watch a RU-vid repair video I see it myself within the next week
@jonomatic2000
@jonomatic2000 6 лет назад
Great video bud. Way to mention 4g63 man jafromobile.
@vinniecampaniello4841
@vinniecampaniello4841 3 года назад
Hey I have a question so do I have to drop the pan to change it because my gasket loos fine on the pan and I can remove the oil pump without dropping the pan right?
@montestu5502
@montestu5502 6 лет назад
Did my 1999 Camry last year only to have the shaft seal to leak. Must not have lubed it good enough. Did you pack the oil pump with petroleum jelly when you put it back together?
@devonblaine
@devonblaine Год назад
Very helpful. Thank you. Have you noticed a dry oil filter between oil changes?
@amunderdog
@amunderdog 6 лет назад
Happy New Year Keep doing what you do thru 2018 and beyond.
@lightshine6044
@lightshine6044 5 лет назад
Can you tell me exact name of grease that you put on the shaft of oil pump? Thanks
@thetwig187
@thetwig187 6 лет назад
Those "GLOVEWORKS" orange (or green) gloves are fantastic! they are hands down (no pun intended) the best gloves I have ever used. They are super strong and I often can use the same pair 3-4 days without tearing them...and they are ribbed for her pleasure lol so when your hands are covered in grease or oil you still have some gripping strength.
@genaroaviles8555
@genaroaviles8555 4 года назад
Thank you for you video;I have a toyota camry 2.2 Lt
@D6Spanky
@D6Spanky 6 лет назад
I know this car! 😊 Awesome vid Brian, as usual. Loved the behind the scenes bonus footage!
@Ottonic6
@Ottonic6 6 лет назад
Hey Brian, I noticed those gold nitrile gloves look like they have a reinforcement threading in them... Where do I find some of those?.. Another great video, by the way...
@CubasAutomotive
@CubasAutomotive 6 лет назад
It's one of the most common leaks on the older Toyotas. I try to do them every timing belt replacement.
@juanrodriguez-ry6yt
@juanrodriguez-ry6yt 6 лет назад
we must be related happy new year to you
@klc317
@klc317 6 лет назад
next time I pull a seal I'm going to be thinking "Ibis" Good video!
@rwbishop
@rwbishop 6 лет назад
Thats a 'Gerotor' type pump if anyone is interested. They work well and have been around for eons... do a Wikipedia search on gerotor for more.
@briansmobile1
@briansmobile1 6 лет назад
Thanks!
@obsoleteprofessor2034
@obsoleteprofessor2034 5 лет назад
A comment about string. When I used to work on airplanes,.. The crankcase on many airplane engines is split vertically. The repair manual says the parting face is to be sealed with cotton string and a permatex shellac type sealant. It works!On my Camry, I put a string on the sealing face on the thin area between the oring "stain" and bolt holes, using Gasketcinch to hold the string in place. The o-ring is installed in the block as usual. It seems to work. I would agree with the comments that say they could change the seal every time they change a timing belt.
@SurvivalInFlames
@SurvivalInFlames 6 лет назад
I order an oil pump seal kit every time I do a Toyota 2.2 timing belt. They are very a common failure.
@andersonrodriguez8258
@andersonrodriguez8258 4 года назад
Did u lose a lot of oil in less then a week when that problem happen to u ?
@SurvivalInFlames
@SurvivalInFlames 4 года назад
Anderson Rodriguez it usually pours out
@andersonrodriguez8258
@andersonrodriguez8258 4 года назад
In Motion Automotive see no licks on mine no blue smoke coming out nothing oil is clean so weird change the oil 2K miles ago
@VictorRodriguez-vt1gy
@VictorRodriguez-vt1gy Год назад
Going to fix my leak. Great video
@adamsorell4851
@adamsorell4851 6 лет назад
You did all the work and didn't change the oil pump ?? Did you happen to notice the grooves in the oil pump shaft you put back in? It going to eat the seal up and will be leaking again shortly.
@YouTubeCertified
@YouTubeCertified 4 года назад
Thanks for the vid
@windycitystevo2689
@windycitystevo2689 6 лет назад
Love your “new kids on the block”🎶(Right Stuff) grease...you closet Fan...LOL👍👀
@skydivenutta
@skydivenutta 6 лет назад
The kinetic energy of a liquid coming out of an impeller is harnessed by creating a resistanceto the flow. The first resistance is created by the pump volute (casing) which catches the liquid and slows it down. When the liquid slows down in the pump casing some of the kinetic energy is converted to pressure energy. It is the resistance to the pump's flow that is read on a pressure gauge attached to the discharge line. Note!!! A pump does not create pressure, it only creates flow! Pressure is a measurement of the resistance to flow.
@carabela125
@carabela125 6 лет назад
Ok that is like saying the Sun does not cause plants to grow. It just creates heat and light. The heat and light cause the plants to grow. The sun does NOT cause the plants to grow. Now back to the pump, if that pump breaks, then there is NO pressure. No pump, no pressure. Maybe the pump was creating the pressure ? It's all semantics anyway.
@Dankyjrthethird
@Dankyjrthethird 6 лет назад
weaver ...wut? What fluid dynamics book did you read this in? Not trying to rag on you just want to understand this concept better
@kevinbrislawn5918
@kevinbrislawn5918 6 лет назад
finally a camera guy who got it a close up and clear so i can figure out that i don't need to drop the pan! oil pump..i need to do a timing kit replace1
@NebukedNezzer
@NebukedNezzer 6 лет назад
Happy New year!
@briansmobile1
@briansmobile1 6 лет назад
HAPPY NEW YEAR!!!
@sillenHDsportster
@sillenHDsportster 6 лет назад
Nice to see Bleepin Jeep !
@chadharmon5716
@chadharmon5716 6 лет назад
New sub love your videos
@charlierhiger7478
@charlierhiger7478 4 года назад
Did that car have oil spraying up on the bottom of the hood?
@mrsemifixit
@mrsemifixit 6 лет назад
Does the type of grease used on the shaft when installing the seal matter? Like will a certain type degrade the seal or it won’t matter since oil will be splashing around on it anyway
@petersachs764
@petersachs764 5 лет назад
I watched this video too late and only oiled (not greased) the shaft. :-/
@Dziugenonas
@Dziugenonas 5 лет назад
Going to be changing this gasket on my Celica tommorrow! Hope it fixes the leak.
@platinumassasin5979
@platinumassasin5979 2 года назад
How it go
@Dziugenonas
@Dziugenonas 2 года назад
Can't remember the specifics, but I changed the gasket successfully and still no leaks two years later :)
@amineboughachiche9274
@amineboughachiche9274 3 года назад
What is the problem with the explosion of the oil filter in a Toyota car
@budtaz11
@budtaz11 5 лет назад
is correct 2001 and 2002 are same design ????
@NebukedNezzer
@NebukedNezzer 6 лет назад
You are the kind of mechanic I would go to if I lived in your area. Oil soaked timing belt. some of the new ford engines run the rubber belt Inside the engine in the oil. I wonder how that will last?
@mauriciodiaz6890
@mauriciodiaz6890 6 лет назад
Saludos maestro desde chile
@mdkzztop
@mdkzztop 2 года назад
I just had my pulley get wollered out! Why did that happen?
@martin323guerrero
@martin323guerrero Год назад
Any one who can help me with videos on 1990 Camry Dx I have multiple oil leaks . Transmission and motor oil .
@krugerblue
@krugerblue 6 лет назад
Little 2.2 liter :). We call it big over the pond. Just teasing you :))))
@HolyDriver-lz4jh
@HolyDriver-lz4jh Месяц назад
Yesterday I used a thick rag and channellock pliers on the oil pump gear to hold it.
@moneygeewtee
@moneygeewtee 6 лет назад
Hey Brian, you any relation to Ron Howard? Man ya'll look JUST ALIKE!!!!
@kismofer1
@kismofer1 5 лет назад
i think i will buy the whole part...it comes with the gasket
@dbfcrell8300
@dbfcrell8300 3 года назад
A bit of trivia.... that type of 2-pc positive displacement oil pump is called a "gerotor pump". Very common on cars and aircraft b/c it's cost effective, simple and stupid reliable
@josemercado4702
@josemercado4702 4 года назад
Don't you have to pack the oil pump with Vaseline?
@Questchaun
@Questchaun 6 лет назад
That valve tick holy!
@briansmobile1
@briansmobile1 6 лет назад
That's crank. Listen to the frequency at idle. Brutal. Last month I watched one blow up on the freeway on my way home from a shift. It was 2am and about 14°F. I think I got it on dash cam. Gave the lady a ride home.
@Questchaun
@Questchaun 6 лет назад
briansmobile1 wow!
@dharmi44
@dharmi44 6 лет назад
Long Bolt inserted into a short hole is technically speaking known as “bottom knocking”
@brizadv763
@brizadv763 3 года назад
U know about the price it would cost
@mrpartridge8765
@mrpartridge8765 4 года назад
that engine sounds like its about to die. they end up dying from that oil leak. thankfully i found mine just in time while checking for an exhaust leak. it not as bad as that though I end up using 2 quarts of oil a month. i'm gonna replace it when i change my timing belt.
@kenoplayr
@kenoplayr 2 года назад
Why do they die from a oil leak like this? Not keeping an eye on the oil level is all I can think of.
@rentrofmij
@rentrofmij 6 лет назад
Engine sounds hammered. Probably never changed the oil and the gaskets hardened and cracked. Oil changes are cheap. Engines not so much.
@Veikra
@Veikra 6 лет назад
no face reveal for Chrisfix lol
@steamwalker
@steamwalker 6 лет назад
Which is odd considering his face has been shown before.
@jamesu
@jamesu 6 лет назад
usually revealed in the mirror of the car he is working on.
@dc5723
@dc5723 6 лет назад
He was revealed on the SEMA trip last year with Eric the car guy et al
@topherd1011
@topherd1011 3 года назад
Change your oil.. every 5,000.. no matter what.. and you likely won’t have these issues. On that engine tho.. once you get 150K I would just go ahead and plan on adding the cam, crank, and oil pump seals to your timing belt procedure. But again.. a simple 30$ oil change is going to save you expensive headaches in the future.
@Super6-Four
@Super6-Four 4 года назад
Migh as well replace the oil pump
@Gordon302
@Gordon302 6 лет назад
+brianmobile1, I thought that synthetic oil was known to deteriorate rubber gaskets?
@shanebrunette4399
@shanebrunette4399 6 лет назад
Don't use the dorman part on it
@sabujpattanayek8799
@sabujpattanayek8799 4 года назад
i'll be so glad when we're done with all these parts with oil
@oby-1607
@oby-1607 2 года назад
Also, if you try to ram your bolt in the hole too fast and you miss, there are consequences.
@jamesu
@jamesu 6 лет назад
I have found this leaking when servicing timing system on these engines and reseal it at the same time.
@kdmq
@kdmq 4 года назад
I learned today how to make a Dodge truck reliable.
@mikerobo2112
@mikerobo2112 3 месяца назад
Only leak on mine is the power steering.
@subarutime5089
@subarutime5089 6 лет назад
I like your Subaru video's I won't be around a Toyota car there🤔
@briansmobile1
@briansmobile1 6 лет назад
Toyota is or at least has been a major owner and influencer of Subaru. They aren't identical twins, but they're definitely cousins and continue to be more so.
@subarutime5089
@subarutime5089 6 лет назад
briansmobile1 true I found that Toyota changes the engine configuration a lot more make them harder to do part swap mostly why I like Subaru so much
@g6qwerty
@g6qwerty 6 лет назад
The Oil pump leaking was the first leak I thought of when I saw the tittle of this video.
@donallenpererajayatilaka9843
@donallenpererajayatilaka9843 5 лет назад
. . ....
@skydivenutta
@skydivenutta 6 лет назад
There is no pressure side to a pump. Pumps create flow not pressure. Pressure is created by resistance of a oil gallery or an appliance
@Bleachanna
@Bleachanna 6 лет назад
weaver you are contradicting yourself 🙄
@Veikra
@Veikra 6 лет назад
you need more thumbs up
@Veikra
@Veikra 6 лет назад
he's not
@Bleachanna
@Bleachanna 6 лет назад
weaver yeah he is, if the output side is under pressure / resistance then it is the high pressure side. It's not hard. Saying that it's high pressure side isn't exactly valid but isn't it lower than the intake side? Making it the high pressure side 🙄
@skydivenutta
@skydivenutta 6 лет назад
As I said there is no pressure created by a pump only flow the is no pressure side no low no high there is only flow created the pressure on both sides of the pump will be equal. The circuit is an open type atmospheric pressure system the only pressure that is created is wen the oil flows to a given area the area creates pressure due to the restriction of oil galleries
@ankersman
@ankersman 3 года назад
If it isn't broke don't fix it. The shills here who say replace this or replace that, actually some of them have a financial interest, like spare OEM / china-crap parts brings food to their table. With 5sfe engine I am quite happy to leave timing belt until it breaks or performance gets bad. If you not happy to DIY yourself,. you can put a little aside each week so the repair bill isn't such a trauma.
@smcic
@smcic 6 лет назад
All you youtubers hang out a lot?
@Usmanthemecano
@Usmanthemecano 6 лет назад
1st
@briansmobile1
@briansmobile1 6 лет назад
B-ravo!!! B-mobbed it!
Далее
3S/5S Oil pressure mod
15:55
Просмотров 12 тыс.
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
кукинг с Даниилом 🥸
01:00
Просмотров 491 тыс.
Ouch.. 🤕
00:30
Просмотров 6 млн
CHEAPEST OIL LEAK FIX THAT WORKS
7:39
Просмотров 2,3 млн
Всегда проверяйте зеркала
0:19
Every car need this.#car #carhack #shortsyoutube
1:00