Toyota Landcruiser 200 Series (LC200) Bonnet Scoop Installation using a 79 Series Donar Scoop - Ep 7

Подписаться 14 тыс.

Просмотров 19 тыс.

50% 1

The finished product.
In this series follow along as I install a current model Toyota 79 Series Landcruiser bonnet (hood) scoop onto a 200 Series Toyota Landcruiser bonnet. I used a second hand 200 Series bonnet and a new 79 Series bonnet as my starting point. This DIY series follows the entire process from procurement of the materials through to completion of the project with full costings. In this final installment, I colour sand the bonnet, install the ductwork, and fit the bonnet to the vehicle. I also perform some inlet air temperature testing. If you are new to this series, check out the full project by starting back at episode 1. Click here to check it out!
• Toyota Landcruiser 200...
Feel free to subscribe to catch future build projects and overlanding trips across Australia.

Авто/Мото

Опубликовано:

26 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 166

@paulcavka1375 4 года назад

You may not be a professional but I doubt they could have done a better job. Bro, that looks spectacular.

@JafffaAdventures 4 года назад

Awesome feedback Paul, thank you. One thing I had in my favour was that I have more than a few eyes watching me do this so there was an incentive not to screw it up! Thanks again for your kind words, really appreciate it 👍😎

7 месяцев назад

Pretty awesome. Respect, man. An absolute craft mastership. I doubt if you can expect many professional workers to do it with such care.

@JafffaAdventures 7 месяцев назад

Thanks mate, that’s very kind of you to say. I’m certainly pleased with the results. Cheers👍😎

@craigjameslister290 Год назад

OMG what an achievement and what a great result !! Why, just why, Toyota didn't you have this as an option; I would buy one for my 200 series. Well done Tony !!!

@JafffaAdventures Год назад

I know aye, they would have sold like hot cakes. Thanks for watching Craig😎👍

@andrewrutter2270 4 года назад

Great job! Had me glued to the whole series. Binge watched like a Netflix drama 👍🏼

@JafffaAdventures 4 года назад

Thanks Andrew, really appreciate your kind words and for taking the time to share them. I have a smile on my dial every time I see the Cruiser now so it was very much worth the effort. Go well mate, and thanks again.👍😎

@bigfishfishing-111 Год назад

Awesome series, Terry. I just watched them all, while having a few Rums.

@JafffaAdventures Год назад

The best way to do it mate, thanks for sticking around 👍😎

@stevetaiapa5566 2 года назад

Just watched the whole series. Bloody fantastic job mate. You should be proud of yourself

@JafffaAdventures 2 года назад

Thanks Steve, that is very kind of you to say. I am very pleased with the outcome that’s for sure. Thanks for watching and commenting mate, I sincerely appreciate it 😎👍

@stevetaiapa5566 2 года назад

I also added the door lights as per your video. Now my 200 can be seen from the moon. I’m just going to do what you do. Lol.

@JafffaAdventures 2 года назад

That’s too funny Steve, and yes it’s awesome to have your vehicle visible from the moon😂. Thanks for watching and sharing mate, I sincerely appreciate it 😎👍

@hanshonstatzky961 4 года назад

For someone that's no expert you did a fantastic job. Well done

@JafffaAdventures 4 года назад

Thanks Hans, those are very kind words indeed, I appreciate them very much. I must admit, the result exceeded my expectations, so there must be some luck in there as well👍😎

@ozzyjim 3 года назад

You should be proud of that project. Ups n downs learning along the way and most importantly for the result you are happy and content with.

@JafffaAdventures 3 года назад

Thanks James, I appreciate your kind words. I have a smile on my dial every time I get behind the wheel. Keep the shiny side up mate👍😎

@ralph04ification Год назад

What a great outcome, it looks amazing.....well done that man 🍻

@JafffaAdventures Год назад

Thanks mate, that is very kind of you to say. Still love looking at it as I’m driving, very happy👍😎

@frankpolidano1284 8 месяцев назад

Wow, the last bit was awesome the breakdown hours blood sweat and tears and to say he’s not a professional. I’ll give you a job any day of the week but arm the breakdown with expenses are and Labor open it down. Just wanna confessional should cost around about 4 to $5000 On the high side, worth it every cent thanks for sharing with us Terry

@JafffaAdventures 8 месяцев назад

Thanks Frank, that’s very kind of you to say. I smile every time I get behind the wheel, it never gets old. Cheers👍😎

@tonyh4233 Месяц назад

Brilliant work, your a genius, brilliant work

@JafffaAdventures Месяц назад

Thanks Tony, that’s very kind indeed😎👍

@9kufstein 2 года назад

Absolute fantastic workmanship - very well done!!!

@JafffaAdventures 2 года назад

Thank you mate, you are very kind for saying so. I still smile every time I get behind the wheel, so the love is still there! Cheers

@scann13 4 года назад

Mate, that looks tuff as!! Well done! And you completely nailed it with the decal colour, looks mint!!

@JafffaAdventures 4 года назад

Thank you for taking the time to reach out and share your thoughts, I sincerely appreciate it. I was trying to get a colour that was subtle and blended well, while still being able to be seen. I think it worked too, thanks for letting me know. Cheers😎👍

@jarminkhan2457 3 года назад

Wow what a journey!! Thanks, I really enjoyed watching your bonnet build from start to finish. You've done a fine job i must say.. I really liked the way you explained things in detail. You made this kind of back yard job seem like an easy job. Your bonnet came out looking factory made!! Definitely a very great motivational video.. Again, thanks mate 👍🏻

@JafffaAdventures 3 года назад

Thank you for watching and taking the time to comment Jarmin, I sincerely appreciate it. It was quite a big job, but sooo worth it in the end. I have a smile on my dial every time I get behind the wheel. I’m building an FJ45 restomod ATM and will be fitting the earlier 79 Series scoop to that one. Stay tuned for that if you need another bonnet scoop fix😂. Keep the shiny side up mate😎👍

@fishernick2447 15 дней назад

👏👏👏 what an achievement, love it

@JafffaAdventures 15 дней назад

Thanks mate😎👍

@defenderoff-road 4 года назад

Bonnet looks great and has made the car look Awesome well done Terry

@JafffaAdventures 4 года назад

Thanks Mike, I am stoked with how it turned out and it exceeded my expectations. I appreciate you following along on the build. Cheers👍

@kellsy1978 4 года назад

Absolutely brilliant job mate. It looks MENTAL.

@JafffaAdventures 4 года назад

Thanks for the kind words Mark, I am wrapped with the finished product that’s for sure👍😎

@rjochheim 2 года назад

That’s such a great outcome mate… Well done 👍

@JafffaAdventures 2 года назад

Thanks for watching and for the kind words mate, I sincerely appreciate it 😎👍

@MrPeterkonstantouras 4 года назад

Absolutely love it mate, well done, couldn't of come out any better, now I just got to do mine.

@JafffaAdventures 4 года назад

Thanks Peter, I must admit it exceeded my expectations. Good luck with your project mate, you won’t be disappointed 😎👍

@6wilbur9 4 года назад

Wow. Absolutely incredible mod. Toyota should do this to all 200s. Looks amazing (oh yeah, & has a nice side effect of lowering temps)!

@JafffaAdventures 4 года назад

Thanks for the kind words and I agree 100%, Toyota should have done this from the get go! I appreciate you following along and taking the time to comment, it means a lot. Cheers😎👍

@gtb4 Год назад

Impressive! Thank you for sharing.😊

@JafffaAdventures Год назад

Cheers mate, that’s kind of you to say 👍😎

@fvlok 3 года назад

That looks bloody superb !!

@JafffaAdventures 3 года назад

Thanks Fred, you are very kind❤️😎

@glennvaughan3125 3 года назад

Superb job Terry, and looks absolutely fantastic. Not sure about the amateur status either, as I think you may struggle to find as good as a job from some professionals, plus the satisfaction of doing it yourself. Also binge watched the series like some of the others

@JafffaAdventures 3 года назад

You are very kind Glenn, thank you for taking the time to share your thoughts. I still can’t keep my eyes off it every time I climb behind the wheel, absolutely love it! Thanks again Glenn😎👍

@bladebibes Год назад

Looks awesome. You've inspired me to have a go

@JafffaAdventures Год назад

Good stuff Justin, you won’t regret it mate. Cheers😎👍

@BrycePurden 4 года назад

Looks awesome. And practical as well. Top job. 🇨🇦

@JafffaAdventures 4 года назад

Thanks for following along Bryce, I appreciate you spending some time on the channel. More trips, build videos and product reviews to come 😎🇦🇺🇨🇦

@grayzbildz 3 года назад

Loved the final result mate, I think I will do the same for my 200. Only one gripe, PPE. Especially 2K clear coat is deadly.... you should have used an organic P2 filter AT THE LEAST along with a full tyvek suit (It's BAD BAD juju to absorb into skin as well). Please for any following Terry's excellent work, please do the research and use the correct PPE whenever using 2K paints. Cheers,, Andy.

@JafffaAdventures 3 года назад

Good advice Andy! Thanks for watching and commenting mate, I sincerely appreciate it 😎👍

@rockfossil9006 4 года назад

Wow I’m actually impressed

@JafffaAdventures 4 года назад

Lol, good stuff mate 👍😎

@maxgermasi3302 4 года назад

Great Project mate! Enjoy it. As for me.... the were the best 7 beers I ever had. Would I do it? Not so sure. Would I watch it again? Bloody oath I would! Thanks Jafffa great job! On the bonnet and on the videos, please keep 'em coming

@JafffaAdventures 4 года назад

Amazing feedback Max, thanks so much I genuinely appreciate it. Seven beers is a great incentive to watch the series again, in fact I think I’ll give it a try👍😎. Will definitely have more vids coming, trips and build stuff just around the corner. Again, thanks for reaching out mate😊

@kjoy064 4 года назад

Great job!

@JafffaAdventures 4 года назад

Thanks for the feedback and support, I really do appreciate you following along👍

@outtarangetouring2677 3 года назад

Mate, great job

@JafffaAdventures 3 года назад

Thanks you mate, I appreciate you taking the time to comment😎👍

@davidoconnor6051 2 года назад

Looks like a beast.

@JafffaAdventures 2 года назад

I love it David. Just got back from a month long trip at Cape York and smiled every time I got behind the wheel. That epic trip will becoming out a bit later (and no, it was not on the Overland Telegraph Line!). Thanks for watching mate 😎👍

@andrewmorgan4306 Год назад

Great job Terry ,i,am a V8 Nissan owner that do,es look good well done.

@JafffaAdventures Год назад

Thanks Andrew that is very kind of you to say mate👍😎

@janethall148 4 года назад

Absolutely awesome Terry, Mines the lighter silver next time you do one lol. Great vid series look forward to your next adventure. Cheers Eric and Janet SA.

@JafffaAdventures 4 года назад

Thanks guys, really appreciate you following along as I know you can spend your time anywhere, and you chose me for part of it. Very humbling. I’ll keep the content coming, build stuff, reviews, and trips now that the summer heat wave is coming closer to an end. Cheers❤️👍

@DiHandley 3 года назад

Okay then...Holy shit Terry, you just wrecked it! But I’m willing to keep watching. Wow! 👍

@JafffaAdventures 3 года назад

Lol, keep the shiny side up mate👍

@thebogan364 3 года назад

Mate , absolutely brilliant. Lol , I'll take one in silver thanks. Very professional, crazy skills you've got. A bit (alot) beyond my diy capabilities.. I love my 200 , but that is definitely a horrible design fault. Thanks for sharing the project.

@JafffaAdventures 3 года назад

Thanks for your kind words mate, I sincerely appreciate it. I still get a smile on my dial every time I get behind the wheel and see that big whopping bonnet scoop hump. Keep the shiny side up 😎👍

@newforest8969 4 года назад

Really great result. Looks they way they should be. Wish I had the skills to do the same. I want one

@JafffaAdventures 4 года назад

Thanks for your kind words and for taking the time to share them here, I sincerely appreciate it. I could not agree more, why Toyota did not come out with this in the first place is a mystery to me! Enjoy the content and keep the shiny side up😎👍

@nebegama1 4 года назад

Amazing job. WOW. Awesome.

@JafffaAdventures 4 года назад

Thank you Benji, really appreciate your kind words👍😎

@zoezoe610 4 года назад

Great job matey

@JafffaAdventures 4 года назад

Awesome, really appreciate you taking the time to reach out, thank you😎👍

@VeeZeeSS 3 года назад

Well done !

@JafffaAdventures 3 года назад

Thanks Jason, I’m wrapped with the finished product. Puts a smile on my dial every time I get behind the wheel👍😎

@disturbunce2335 4 года назад

Great job. I would love to have those skills.

@JafffaAdventures 4 года назад

Thank you kind sir!

@johannvanschalkwyk2141 3 года назад

Terry thank you for the 7 episodes... Great work and it looks stunning.... I will be adding this to my list :)

@JafffaAdventures 3 года назад

You are very kind Johann, thank you for saying so. I must admit I do smile every time I look at it. I think a large part of it is the fact I did it myself. Definitely pushed my skills boundaries on that one!! Keep the shiny side up mate, cheers😎👍

@XploringOz 4 года назад

Mate, that is awesome work. Thanks for sharing with us and appreciate the analytical data at the end!

@JafffaAdventures 4 года назад

Awesome feedback, thank you for taking the time to share your thoughts. I was very much surprised at what a difference the 79 scoop made on the IAT’s. Thanks again 👍😎

@4bnewb969 4 года назад

I have a bonnet scoop on my ‘13 Hilux...not quite as impressive as yours. Great job👌👌enjoyed the series. Cheers...

@JafffaAdventures 4 года назад

Awesome feedback, thanks for reaching out. It’s a pity most manufacturers just plop something on the bonnet almost as an afterthought. I’m not just looking at Mr Toyota, they all do it. I appreciate you taking time out of your schedule to follow along, thank you.😎👍

@thebogan364 3 года назад

Suprised to see photos of the new 300 series.. looks like they didn't learn from that design fault. No scoop again.

@JafffaAdventures 3 года назад

I saw that too. I’m not sure if the photos I saw were real or fake, but it reminded me of a cross between a 200 and a Y62. Time will tell I guess 😎👍

@kymbloffwitch3728 4 года назад

Great work it looks awesome definitely sets it apart What fog lights are those in the bar?

@JafffaAdventures 4 года назад

Thanks for taking the time to comment and of course for the compliment Kym, I do appreciate it. The lights are just eBay specials, LED to replace the crappy ARB incandescent bulbs. I sold the glass ARB lenses and paid for these with change to spare. The LED’s work great, however I try to avoid night driving anyway. Cheers👍😎

@harbuds 3 года назад

Great job mate looks awesome what year is your cruiser and what year 79 series bonnet did you use I'm looking at doing the same to my 2017 sahara just need to know what bits to sorce.

@JafffaAdventures 3 года назад

Thanks Geoff, I really appreciate your words. I think I detail that in the first episode but it depends on what style scoop you want. The bigger hump ones are on Aug 2018 to current 79’s I believe. The lower profile scoops are pre Aug 2018. I went for the larger bolder humped scoop and I think it works. Cheers👍😎

@blairjoyce3778 4 года назад

Sounds excellent and keep it up .🇦🇺😉🙂👍

@JafffaAdventures 4 года назад

Thanks Blair, appreciate you following along.😎👍

@blairjoyce3778 4 года назад

That bonnet scoop is more idea for that 200 LC in future. 🙂👍

@LimestoneCoastCustoms 2 года назад

Brilliant Terry! I'm starting to think you have a past life you are not telling us about??

@JafffaAdventures 2 года назад

Well I did have a past life, but it had nothing to do with anything automotive. I studied chemistry and microbiology and worked in those related industries for years. I learned my panel beating by having a go and failing a lot🤦‍♂️. Thanks for the kind words Rod, I sincerely appreciate it 😎👍

@trevorhoareau7203 4 года назад

That is a great looking bonnet mate. Well done . I’m generally not a copy cat . But I think I am this time mate . Lol

@JafffaAdventures 4 года назад

Good stuff Trevor. I trust it might create a roadmap and perhaps a bit of inspiration. It was certainly a fun project for me. Thanks for watching mate, I appreciate it.👍😎

@Super-trucker-T909 4 года назад

g'day mate, top job, does your side rails hit every now and then on the snorkel?

@JafffaAdventures 4 года назад

Thanks for the kind words Derek, I appreciate it very much. Yes, the side rail contacts the bottom of the snorkel from time to time. Not too dramatic though, not even enough to scratch the paint. Cheers👍

@brendonashmore4040 3 года назад

Hi bud, Looks awesome. Can you please advise who you purchased the scoop from? Thanks in advance

@JafffaAdventures 3 года назад

Thanks for your kind words Brendon. I did not purchase the scoop on its own, I purchased an entire 79 Series bonnet and cut the bits I needed out of that. See episode 2. I got it off eBay but the dealer was actually not that much more expensive. Could not find a second hand one anywhere, that was my first choice. Cheers😎👍

@XploringOz 4 года назад

Hey mate, would you be able to let us now what software you're running to access the Air temp (turbo) or charged air temps? Thanks.

@JafffaAdventures 4 года назад

Sure can mate, it’s Toyota Techstream I go into it a little bit in my Tools to Carry video. Cheers

@XploringOz 4 года назад

Jafffa Adventures Thanks mate 👍

@robdotcom71 4 года назад

Now that my friend looks seriously cool...... have the orders started coming in?

@JafffaAdventures 4 года назад

Thanks for the comments, I agree it came out awesome and I am stoked. Yes, the orders are flowing in and my order taking book of zero is completely full😂. I appreciate you following along, thank you👍😎

@MudducksTouringAustralia 4 года назад

Mate its still not too late to do one for me lol, PS Im going to the Brisbane 4wd show 28th March if you like to catch up and say hi. Cheers Steve

@JafffaAdventures 4 года назад

Thanks Steve, would be great to catch up for a yarn. Let’s catch up closer to the day. Thanks for following along mate 👍

@MudducksTouringAustralia 4 года назад

@@JafffaAdventures When you get a chance Terry, goto my RU-vid channel, grab my email add and email me please. We will be at Drifta Brendale for part of Saturday 28th March, if that date works for you.

@kaya7934 4 года назад

That's a job well done!!! I've been looking for someone to carry out the work can you recommend some ?

@JafffaAdventures 4 года назад

Thanks for the kind words, I appreciate them very much. Rory Bramwelll from Bramwell Auto Group can sort you out. I'm not sure where you are located but they are in Qld, 45 minutes out of BNE. You can check them out on FaceBook and message him from there if you are interested.

@soccerdad7115 4 года назад

Jafffa Adventures where can I source one ?

@ryantierney9757 2 года назад

Recon it could be easily done on a n80 hilux ?? This looks unreal you got the knack for it mate

@JafffaAdventures 2 года назад

I don’t see why not Ryan but I would photoshop it first to see how it looks. Thanks for watching and commenting mate, I sincerely appreciate it 😎👍

@paulsteen5485 2 года назад

Great job enjoyed the videos I have a 2009 Sahara would you do one for me ? I am in Sydney

@JafffaAdventures 2 года назад

Thanks Paul, I appreciate your kind words. It’s a one off mate, but you have the instructions on how to do it yourself😉. Have a great weekend mate😎👍

@jimprovan8866 3 года назад

Hi bloke, I see in the video the vehicle had more power with the bonnet protector off, why put it back on?

@JafffaAdventures 3 года назад

Hi Jim, great question mate. I spent a crap load of time getting the finish just perfect on the bonnet. I wanted to try and protect it because that leading edge cops a flogging, especially with the dirt and gravel work I do. It’s still running cooler with the scoop plus protector when compared to the factory setup, so I’m getting a good compromise of protection plus cooler running. You are correct in you’re observation however, if you want max cooling run without the bonnet protector. Thanks for watching and commenting mate, I sincerely appreciate it 😎👍

@bob100079 4 года назад

In a heartbeat...? So my 2020 is arriving in June. When do you want me to bring her over to your place?

@JafffaAdventures 4 года назад

Although taking an angle grinder to a brand spanking new bonnet is enticing, let me think about that.....yeh nope😂😂. Thanks for following along, I sincerely appreciate it.😎👍

@rayarmstrong5374 2 года назад

Thanks Terry What a great series Binge the whole lot What a great job you have done Great skills I really like the decal Where did you buy it from I am going to do mine I will send you a picture when completed I hope it turns out as good as yours Cheers Ray

@JafffaAdventures 2 года назад

You are very kind with your words Ray, thank you I appreciate it very much. I would love to see a picture when you get going on yours and it’s great that you are having a crack mate. I got the decal that I used as a template off eBay. Just do a search there and heaps come up. Have fun with the build mate, the results will more than pay for your hard work. Cheers😎👍

@rayarmstrong5374 2 года назад

Hi Terry The finished product Thanks again for your great videos Cheers Ray

@rayarmstrong5374 2 года назад

Hi Terry Sorry I cannot add a photo Cheers Ray

@JafffaAdventures 2 года назад

I have an email address that you can find on my channel home page. If you send it to that address I will get it. Looking forward to checking it out mate👍😎

@JafffaAdventures 2 года назад

Thank you Ray!

@heathholland2319 4 года назад

Hi Terry Well i couldn't put it off any longer. I have the bonnets in the shed, 79 bonnet has been cut and ready to weld together, then cut out the 200 bonnet. Thanks again for the inspiration to do it. If you don't mind answering one question please. The bulge assembly for the 79, did that come as a complete assembly with the rubber seal for the intercooler or was it two seperate sections. Thanks again and any info will be greatly appreciated. Cheers Heath

@JafffaAdventures 4 года назад

Well you are a legend Heath, I take my hat off to anyone willing to have a go, and you sir are one of those individuals! Re the bonnet bulge, I assume you are asking about the bits that I bought from Toyota? There are two main parts. The bonnet insert which is the scoop you can see from the outside, and the ducting itself. The ducting plastic takes the air from the scoop to the inter cooler. The rubber seal is part of the assembly. If this is not what you were after just let me know and I’m happy to help in any way I can. Thanks for reaching out mate, I sincerely appreciate it.😎👍

@heathholland2319 4 года назад

Thank s for getting back to me so fast. I didn't really make that all that clear. I have been to Toyota and they have quoted me two separate assemblies for the 79 intake assembly. The top inset as you mentioned which you see from the top and the second from underneath. Just wondering if you got this as one assembly or was it sold as two? As you have mentioned it's near impossible to find any 79 bonnets with these attachments. Thanks again.

@JafffaAdventures 4 года назад

Understood Heath. I’m not sure why Toyota quoted two underside sections. Mine came as one, and included the rubber gasket that mates to the face of the intercooler. I had to buy some clips and fasteners separately but that’s about it. I could dig up an exploded view of the parts for you if you think that would be helpful. Cheers 👍

@JafffaAdventures 4 года назад

And yes the top and underside are sold as two units👍

@heathholland2319 4 года назад

@@JafffaAdventures Hi Terry, If it's not too much trouble to have a look and take you up on the offer. If you have the part number from Toyota when you got yours that would be greatly appreciated, i'll go and see them in the week and get that sorted. Cheers Heath

@Kuderize 4 года назад

Вот это я понимаю, тачка👍

@JafffaAdventures 2 года назад

Thanks for commmenting!

@Mr105. 4 года назад

Looks awesome. Let me know when you wanna try it on a GU bonnet 😉

@JafffaAdventures 4 года назад

Thanks for the kind words and for following along. Re the GU, that’s a great project for you to post up me thinks😂👍

@shaandrew4650 2 года назад

I want one 😩😩

@JafffaAdventures 2 года назад

I know, it is very cool😎👍

@jgdavidson90 4 года назад

This is like pornography. Also love the data breakdown at the end that just capped it off

@JafffaAdventures 4 года назад

Very kind words James, thank you. I appreciate you following along and please subscribe as I will try and keep the content coming!👍😎

@disturbunce2335 4 года назад

I reckon Prado’s are more like arseholes myself. Thankfully LC is still less popular as mummie mobiles

@JafffaAdventures 4 года назад

Yep you are spot on there mate😂

@tierandonnelly1420 3 года назад

shut up and take my money!. would you consider doing one for my 200 series id pay handsomely. looking forward to hearing from you.

@JafffaAdventures 3 года назад

Thank you for taking the time to reach out and comment, I sincerely appreciate it. Unfortunately I’m not in the market to make another one. I’ve moved onto a new restoration project that is taking all my time now. Stay tuned for that one in an upcoming video. Cheers😎👍

@tierandonnelly1420 3 года назад

@@JafffaAdventures that's a shame. mate that bonnet looks amazing i would really love to put that on my car. your right mr toyota should of definitely done that from factory. if you every change your mind or sell your car please and i mean please get in contact with me. keep the vids coming

@JafffaAdventures 3 года назад

Will do mate, and again thanks for the kind words. Cheers 😎👍