Toyota Sequoia\Tundra Ignition switch ring LED light 

anytime time im glad I could help! You will love the transformation it will look like a new truck

More to come!

will do I upload every other week and thanks for the support

thank you so much glad you like it

im glad I could help

Any time! and you will love it!

Thank you for the support!

thank you

@@MoWahidi been following your work to make my Sequoia 02 has good has yours keep up the good wk

im glad I could help!

thanks

Any time!

thanks for the support!! I have a 2007 sequoia limited and I think at the end of the run they made the dash lights SMD so they are already LED and not conventional bulb. but there are plenty of really good videos on how to change them.

@@MoWahidi ohh i see. I have an 02. So I’m going to be changing all my bulbs to led. Keep the vids coming

anytime and I think for the 02 they will take t5 bulbs I think its 5 bulb for the background light and if you do get them make sure they have 3 points/led chips so you do not have dark spots.

@@MoWahidi after I watched your video with the climate control led 3point swap. I clicked then link and ordered 20 of them to get started! Thanks to you! Much appreciated. I’m glad I stumbled on to your RU-vid channel!

im glad i could help and thanks for the support!!

Thank you! and the rear window switch and heated seats are a Neo 3 it is a 3mm bulb. you can get them at Superbrightleds.com

@@MoWahidi thank you for your help and the awesome vids!

I am glad I could help!

there are for the climate control bulbs and some of the instrument cluster watch my video on the climate control it will show you how to do it. and some of the instrument cluster is going to use some of the NEOx bulbs from www.superbrightleds.com/moreinfo/miniature-and-subminiature-bulbs/neox-led-bulb-high-power-instrument-panel-led/221/ www.amazon.com/Nanpoku-Chipsets-Dashboard-Instrument-Replacement/dp/B08BF59BQV/ref=sr_1_10?dchild=1&keywords=t5+white+led+bulb&qid=1613834806&sr=8-10

@@MoWahidi thank you so much dude

glad I could help!

mine came from factory with LED

Hi Jay. those bulbs are soldered in the cricket board im not sure exactly about the bulb numbers they are very small. i am sorry if i couldn't be any help.

@@MoWahidi Thanks Mo

what year is your sequoia\tundra? mine is a 2007 and it is different than the older models for some reason.

@@MoWahidi I have an 07 as well, Limited

that's what I have too

2003 limited drive lights out just like the rest of us lol

@@appleguy6708 for the drive lights i think they are a NEOx bulb not sure.

they are T5 bulbs

@@MoWahidi Thanks again brother. Is that the same size bulb is by the foot break? (Parking 🅿️)

yes most of the bulbs are T5 and for the buttons they are NEO3 from superbrightLED.com the T5 are from amazon get the 3 points ones works better

@@MoWahidi got Instagram?

yes its Mowahidi5

everything should fit as far as the bulb sizes for the interior lights

yes t5

this should work on all Sequoias

my sequoia is 2007 1st gen and yes it will work on your 2002

yes most of this stuff should fit the tundra

it should be

i ordered 20 T5 bulbs but if you are doing the gauge cluster you need more about 30. and for the regular bulbs they are T10/168/194 bulb i ordered 20 of them and have plenty left

@@MoWahidi thanks for the tip nice turn out

anytime!

yes you can but the odometer is not going to be the same

I have an 05, you have to go pre-face lift for the option to replace cluster bulbs

@@Skyzdalimit68 even if you don't have the SMD?

@@MoWahidi best I can tell, the cluster bulbs are only replaceable in the 01-04 sequoias, they changed the cluster apparently with the front grille lol

@@MoWahidi I was just gifted an 05, bought all the bulbs I was gonna need and BLAM! Not replaceable....

all of them should

yeah I do but it is a different kind of bulb you have use a soldering gun and its just too much work

@@MoWahidi I managed to remove it out of the cigarette lighter finally. Which bulb did you use to solder it in ?

@@Mxctezuma amzn.to/3LQWZhw

no i have not it is more complicated than just changing the bulb

Yup it’s a PIA. After messing around with it I told myself it’s not worth it lol. There’s also this tiny light in the ash tray.

@@petergreco6010 yeah i found that out later but i didn't replace it

yes you can sequoia and tundras are mostly the same

My 2006 tundra doesn’t have a light in the rear glass switch, 😢

if I got this translated right I think the ones on the floor board are T5

@@MoWahidi gracias pero en en los relojes de velocidad y el de las revoluciones es el t5 pence q eran mas grande 👍👍

@@robertosequoia if they are bigger than t5 they should be t10 I hope this is help full

@@MoWahidi gracias campeón

I have a factory SMD gauges they are LED from the factory or I would have made a video on how to change them out.

I may have a bad ecm.ill check this weekend as i work 24 for 2 weeks and have 2 days off every other weekend.just got my Sequoia last week.ill explain later.

alright just Let me know what I can help with I will try my best to answer any questions!

@@MoWahidi Do you know if the 05 & 06 Sequoia's have this cluster also or is it just 07?

@@AdrianR84 I think they do but I don't know what trim came with white led the o5-06 have the same style and shape but I've seen them green