TP Link Router Recovery Rescue Unbrick Official

Подписаться 177 тыс.

Просмотров 36 тыс.

50% 1

Thank you so much for commenting, contributing, super thanks, subscribing, liking and the very kind words. I appreciate it greatly. All the best.👍😀
(paid links) As an Amazon and Ebay Associate I earn from qualifying purchases. This does not affect the price of the products to you and helps me to bring this content to you.
USB 3.0 Gigabit Ethernet LAN Network Adapter at Amazon(paid): amzn.to/45sWsME or eBay(paid): ebay.us/GN6Hrb
USB C to Ethernet Adapter for Laptop PC Gigabit Ethernet LAN at Amazon(paid): amzn.to/45ryK3n or eBay(paid): ebay.us/6fWVZz
PNY 500GB SDD Drive Used in This Video At Amazon(paid): amzn.to/3uQJZBz Or eBay(paid): ebay.us/LY2Unp
USB C to USB 3.0 Adapter [2 Pack] OTG Cable at Amazon(paid): amzn.to/3eThRZU or eBay(paid): ebay.us/khZocT
Sinstar USB C OTG Adapter, 2 in 1 USB-C Splitter at Amazon(paid): amzn.to/3DmsmOV
or eBay(paid): ebay.us/tFtmuJ
USB C to USB Adapter [2 Pack], JSAUX USB Type C Male to USB 3.0 Female OTG Cable At Amazon: amzn.to/3O7Kxui Or eBay: ebay.us/BIfcfr
My channel / richardlloydusa
SD Card Reader, 3-in-1 USB 3.0 / USB C/Micro USB Card Reader amzn.to/2DK9KvQ or eBay: ebay.to/3fGMVGJ
USB Type C SD/Micro SD Card Reader,USB 3.0 SD Card Reader OTG Adapter for SDXC At Amazon: amzn.to/2X5FUHd Or eBay: goo.gl/ZJNmw8
2.5 inch SATA to USB3.0 UASP Clear Portable Hard Drive Case: amzn.to/31ADvYa Or eBay: ebay.to/3ir7gBU
Sandisk Extreme UHS-I A2 Card 400GB At Amazon: amzn.to/2tk7qDm
Sandisk Extreme UHS-I A2 256GB Card At Amazon: amzn.to/2BM0p31
Sandisk Extreme UHS-I A2 Card 128GB At Amazon: amzn.to/2WXQyjv
Seagate Portable 2TB External Hard Drive At Amazon: amzn.to/2Asn3fT Or Ebay: ebay.to/32qNyRw
Sandisk Cruzer 64GB USB Flash Drive At Amazon: amzn.to/3mjsW5g Or Ebay: ebay.to/3bPVQ8z
Sandisk Glide 128GB USB Flash Drive At Amazon: amzn.to/2s67V3d Or Ebay: goo.gl/wAatgZ
Sandisk Ultra Fit 256GB USB Flash Drive At Amazon: amzn.to/2s5x3Hn Or Ebay: goo.gl/fqUNpM
Toshiba Canvio 1.0 TB USB 3.0 Portable Hard Drive At Amazon amzn.to/2SEh0fd Or Ebay: ebay.to/35trEPm
TP-Link AC900 WiFi Router At Amzon: amzn.to/2pm0Ie3 Ebay: goo.gl/f65q15
TP-Link WR940N Router (Upgraded) At Amazon: amzn.to/2NodxPu Ebay: goo.gl/DJEqCT
TP-Link N300 Router (TL-WR841N) At Amazon: amzn.to/2gdL8h8 At Ebay: goo.gl/wTW2tg
TP-LINK TL-WR841ND Wireless N300 Home Router Detachable Antennas: amzn.to/1GUSvRS Or Here At Ebay: goo.gl/FwoCRW
Cable Matters 160021 5-Feet Cat6 Snagless Ethernet Patch Cable, Pack of 5 (Black/ Blue/ White/ Red/ Green) At Amazon: amzn.to/2gdUg5k At Ebay: goo.gl/XAGhmJ
STANLEY 94-248 65 Piece Homeowner's DIY Tool Kit At Amazon: amzn.to/2SR7ZzS Or eBay: goo.gl/W6z2mX
Amazon Prime Membership Sign Up: goo.gl/ewmAV
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/2P9bazV Or eBay: goo.gl/7WkzYb
Overhead Cam: amzn.to/2E4kiF8 Or eBay: goo.gl/kqeoVv
Handheld cam: amzn.to/2Qmh2e5 Or eBay: goo.gl/KAiZyX
Logitech C270 Desktop or Laptop Webcam: amzn.to/2EaoIsE Or eBay: goo.gl/9jHsJQ
Video Software: amzn.to/2SjNKdf Or eBay: goo.gl/CdWBwG
Desktop Capture: amzn.to/2SgVaxQ Or eBay: goo.gl/LYNC3f
Mic: amzn.to/2KFj43r Or eBay: goo.gl/yC8uMC
Mic Wind Filter: amzn.to/2ScZdes Or eBay: goo.gl/HruSsJ
Lens: amzn.to/2Sj4S2G Or eBay goo.gl/C1z9vE
Lens Filter: amzn.to/2P2zN1n Or eBay: goo.gl/U3psNL
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: goo.gl/wwRtEk
Selfiestick dslr: amzn.to/2TUR4gn Or eBay: goo.gl/Rtzrrd
Tool box: amzn.to/2E3r8dQ Or eBay: goo.gl/houqn4
Laptop stand: amzn.to/2E24dzH Or eBay: goo.gl/ZfXhT3
Studio mic: amzn.to/2Q2FO3w Or eBay: goo.gl/bHnT8Z
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: goo.gl/GfNGGT
Neewer Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: goo.gl/AxonTQ
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: goo.gl/ao5nss
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
02/14/19
FAT32 Format For Windows: goo.gl/puMUhR
SD Memory Card Formatter SD association: goo.gl/5i23B3
www.sandisk.co...
www.sandisk.co...
www.sdcard.org...
www.sdcard.org...
crystalmark.in...
as-ssd-benchma...
TP Link Router Recovery Rescue Unbrick Official

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@matrixantas Год назад

For my "dead" Archer c7V5 helped few steps 1. Hold reset button (when holding reset and then turn off, then you see sign of arrows "WPS" turning green) 2. it's very important to name BIN file correctly in my case "ArcherC7v5_tp_recovery.bin"

@richardlloydusa Год назад

Thank you so much for watching, commenting, the valuable feedback and the very kind words. I appreciate it greatly. All the best.👍😀

@lyleeewang Год назад

how did you bring back your c7 v5 sir? I also killed mine and I've tried this method and all other methods a couple of times and non works.. I'm still getting a solid power led and I can't see my wifi anymore

@Erbaco02 Год назад

I just get the power button light on and the arrows when I reset and power on but no other lights it takes the software but no lights go on and the power light is the only one that’s on any advice?

@richardlloydusa Год назад

Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@richardlloydusa Год назад

Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@jadenstock Год назад

You’re a lifesaver! Just a tip to anyone struggling - make sure to disable your antivirus and maybe reinstall the tftpd program. My antivirus was blocking it before and it was driving me mad!

@richardlloydusa Год назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@92Pony Год назад

I finally got around to trying this on my bricked AC1200. It wasn't without hiccups along the way, but it worked!! Thanks for the video!!

@rayzerx Год назад

Thank you very much for this video, it helped me a lot! Straightforward, informative, and without wasting any time. Greetings from Brazil and much success to you!✌ (I have the same black model)

@richardlloydusa Год назад

@OutlawzOP Год назад

Bless you man and thanks 😊 Even my isp didn't knew what to do but you saved me. I have subscribed

@richardlloydusa Год назад

You're most welcome and thanks for the sub. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Stay tuned! All the best.👍😀

@horizon42q 2 года назад

Hey, I miss your videos on routers. Thanks for posting

@richardlloydusa 2 года назад

You're most welcome. I have been missing doing them too. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@muriluo 2 года назад

Complete and didactic! Congratulations and many thanks

@richardlloydusa 2 года назад

@frankortado3556 2 года назад

Excellent Video, Thanks

@richardlloydusa 2 года назад

You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@svart_kors 2 года назад

I always learn something new here.

@richardlloydusa 2 года назад

I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@loranlukovic1420 Год назад

Hi, excellent walkthrough. I have TP-MR6400 v5 bought used over ebay. When I power on all lights are light up and after sec only power button is blinking fast, no communication seen on tftpd64 log. AntiV and FireW off. Please help!?!

@richardlloydusa Год назад

The TP-MR6400 is a combo router in that it is both a router and 4G LTE modem so it may have a different rescue procedure. Check these procedures out from TP-Link: www.tp-link.com/us/support/faq/1482/ Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@saddamhussain1101 Год назад

Hi Rihard ; All steps are done but the log viewer is not showing anything my router ia Archer Ax10

@richardlloydusa Год назад

TP-Link changed the rescue procedure recently and your Ax10 uses the new procedure. Here my video for the new TP-Link rescue: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oAsACOAM4DM.html Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@saddamhussain1101 Год назад

@@richardlloydusa thanks ❤️

@richardlloydusa Год назад

Most Welcome.

@gabrielwp Год назад

The best video explanation EVER... Luv ya

@richardlloydusa Год назад

You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@gabrielwp Год назад

@@richardlloydusa flawlessly concise explanation and filled with love and ethic. It was the key to resolve a failed firmware upgrade on my router Great work. Subscribed. Once again, thanks. Greetings from Venezuela

@richardlloydusa Год назад

Thanks again for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀

@johnh10000 11 месяцев назад

Sir being a firmware tech, for buses here in the Uk, I find myself in a somewhat embarrassing situation. I have a TP-Link TL-WR1043ND v3 which was running Openwrt. BEFORE I watched this video, I tried to reflash stock firmware using Openwrt [don't do it folks] it seems to have over written the bootloader, any ideas? I have yet to break in to it, both in software and physically ;) Great video. I like the tftp idea for flashing, going to look into that for work.

@richardlloydusa 11 месяцев назад

This is how we learn. I've messed up a few but have always been able to recover them. Check out the rescue procedure here: openwrt.org/toh/tp-link/tl-wr1043nd You might consider getting a USB to Uart converter and wiring into it. Seeing as you are a firmware tech it may be a handy tool for you to have. Please tell me how it goes for you. Thank you so much for watching, commenting, the valuable feedback and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@airwrecktion Год назад

Thank you for making such a detailed video. Unfortunately it hasn’t worked for me. I have read through the comments for more troubleshooting steps and none of the suggestions worked. The router is an tp link archer C8 v1 . So it’s the dual band ac1750 version. I tried to update firmware using the directions on the website and it failed to reboot after the installation. All the router does now is light up the “USB” led. No other LEDs light/blink/react to anything. I followed your directions, confirmed the correct IP address, verified firewall settings for both private and public settings, eventually turned off the firewall altogether, uninstalled and reinstalled the 64bit version, confirmed my OS is running windows10 64bit, and tried another computer. I cannot pick up anything on the log viewer in the tftpd64 program. I’ve tried resetting multiple times and still no luck. Powered the router down, held down reset/wps button, flipped the toggle switch to ON, counted 4 “Mississippi’s” released. Even tried counting to 5 just in case I wasn’t holding it down long enough, and still nothing on the log. Your help would be appreciated sir. Thank you in advance.

@richardlloydusa Год назад

Which IP address are you using on the network interface? If you're using 192.168.0.66 try 192.168.1.66 and see if you get a different result. You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@airwrecktion Год назад

@@richardlloydusa I’ve tried using both IPs. Neither worked.

@richardlloydusa Год назад

I'm not aware of a serial rescue for it but it might exist. A few more things MAKE sure you are using a good Ethernet cable also try it in every LAN port and the WAN port you never know. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@airwrecktion Год назад

@@richardlloydusa Thanks again sir. I’m attempting to try it again using different ports. Known good cable, still couldn’t make it work. If you’re willing to look at it, I’d be willing to ship it out to you, and even pay for shipping back. 😬 I’m currently in Washington state visiting family, but I live in Virginia for work.

@airwrecktion Год назад

@@richardlloydusa I didn’t find a way to contact you directly. But I really would like your help in figuring out this C8 router I have. At the very least a definite answer as to what is wrong with it, so I may find a solution for it. Like I mentioned, when it powers on, Only the USB led comes on blue. Router does not appear to be booting up and therefore I cannot even connect to it. None of the Ethernet ports/ wan port light up when a cable is plugged in. Plugging in into any of the ports always gives me an “unidentified network” at the Ethernet adapter settings page.

@DhiegoRodrigues Год назад

saved me! HERO

@richardlloydusa Год назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@rajkej3112 Год назад

What will i do..if my led light in archer c80 are auto blink and on-off, including power led

@richardlloydusa Год назад

Have you tried this procedure? Thank you so much for commenting. I appreciate it greatly. All the best.👍😀

@SoCalKevin 2 года назад

Thanks for the great guide! I followed all your steps trying to unbrick an Archer A7v5 thats stuck in a boot loop, but unfortunately it didn’t fix it. In TFTP64, the progress bar pops up, goes about 70%, and then disappears. I get the confIrmation that the file was sent in the TFTP64 log, but my Archer A7v5 is still in a boot loop. In fact, I am wondering if the boot loop is is cutting off the TFTP process. Maybe the bin file is transferred, but isn’t writing to flash? I’ve tried the TPlink factory recovery bin, openwrt recovery bin, and ddwrt recovery bin, and then every other bin I could find. They all result in the same questionable premature progress bar, and continued boot loop.

@richardlloydusa 2 года назад

You're most welcome. If you're curious you could get a USB to serial connection and use Putty to have a look at what's going on in the command line interface. You may be able to rescue it that way. This is the interface I use at Amazon(paid): amzn.to/3U51zNx I have videos on how to serial here's a few ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RtqVKNfuxWM.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fme7kwTkttk.html There are many resources available at the DD-WRT and OpenWRT forums too. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@Erbaco02 Год назад

Have a tplink archer C7I just get the power button light on and the arrows when I reset and power on but no other lights it takes the software but no lights go on and the power light is the only one that’s on any advice?

@richardlloydusa Год назад

Have you tried the rescue procedure I show in the video? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@UltimatePopG Год назад

Hi Richard. Do you know if an Archer D9 has the same tftp or serial reflash capabilities? I've been trying to trigger tftp on it but I'm think8ng itay be a different creature altogether since it has the integrated DSL modem. I bad gui flash update the other day and now it is dead.

@richardlloydusa Год назад

Try using 192.168.0.66 and 192.168.1.66 it may be on a different IP address but you may be right it could be that it's a combination unit. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@wsteelenyc Год назад

This meathod doesn't seem to work with a single tp-link ax router. Supposedly there is a way, but tp-link won't tell us. Do you know?

@richardlloydusa Год назад

I think I do, BUT I don't have a TP-Link AX router to try it but here's a link to the procedure: bit.ly/3E4gilJ It will be method 2. Tell me if it worked. Thanks

@ducky0069 Год назад

Greetings Richard Do you happen to know if the Archer C3150 uses similar recovery methods from tp-link support site? regards

@LEE-ty8vq Год назад

HELP plz! I have Archer AX23 and I cant see anything in the logs! I followed your instructions perfectly.. I also checked Openwrt and cant find any information on the device. Please help. I feel like the IPV4 IP is wrong or somthing. I disabked windiws firewall and everything else.

@richardlloydusa Год назад

I believe I know why it's not working. TP-Link has changed their rescue procedure. I've made a video on the new procedure based on your question. It should be ready to post this evening or tomorrow at the latest(Stay Tuned by Subscribing and Hitting the Bell!) . Thanks for asking. Here's a link to the web page I followed on this: www.tp-link.com/us/support/faq/1482/ Thank you so much for watching, commenting, the valuable feedback and the very kind words. I appreciate it greatly. All the best.👍😀

@richardlloydusa Год назад

Here you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oAsACOAM4DM.html Being Premiered right now! Thanks

@TBGGamer Год назад

Hello I have the Archer C6 router, the dual bands light dont show up and the router doesn’t show up in wifi, also while trying to register the log in tftp, there’s no response, tried holding the reset button and switching on the router many times, but the log doesn’t register in tftp

@richardlloydusa Год назад

Here's a good resource for that router: openwrt.org/toh/tp-link/archer_c6_v2 Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@talismanicac 2 года назад

Hi Richard, just a question.. if my computer's ethernet adapter is not reading any signals from LAN cable connected to the router (red X on network adapter), will TFTP client recovery work?

@richardlloydusa 2 года назад

There a few possibilities for failure here; The LAN port on your computer may not bet functioning. You may have a bad Ethernet cable. Try a known good cable. You can do a simple LAN cable test by plugging both ends of the cable into the router. It should light up two ports and that would also tell you the ports on the router are working too. In your case if the two ports don't light up it may also mean that the LAN ports are not working. But make sure first that you know you have a good cable. If you can not get a network connection to your router after you know you have a good port on your PC and a known good cable try every port on your router. Sometimes a single LAN or multiple LAN ports can be blown. Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best. 👍😀

@talismanicac 2 года назад

@@richardlloydusa thanks for the tips. :)

@sudheepsuresh9721 Год назад

@@talismanicac where you able to fix? Im having same trouble on my a7.

@shirleypark3679 2 года назад

Hi Richard, Thanks for all your valuable vid's. have a question, A router is remote which I can manage but need to over-write the admin password. So even if its back to factory default, the password will be a new one I've created/updated.... NOT the original 'admin'

@richardlloydusa 2 года назад

I'm not sure if you're asking a question or making a statement here but I have never seen a factory reset of a router not reset the password back to the factory default (by design this makes sense). Now you could use third party firmware like DD-WRT which allows you to reset the router and NOT have a factory password at all. If you reset a DD-WRT router to defaults it forces you to change the username and password on the first log in. The only problem with that is that you have to do that from a local machine connected to the internal LAN or LAN ports of the router or WIFI. So this doesn't really solve your problem as you still can't do this remotely but you could have someone who is using the network reset the router and password after which they could load up a default configuration to the router and it would set it back to what you wanted. Another option is to configure two routers identically and if anything ever happens to the primary router you could just swap out the routers and have the faulty one shipped to you for repair. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@Rohambili 2 года назад

Did the same on Archer AX10 V1 ---> Custom firmware (Digi ISP) version, but does not work Any suggestion to replace the custom firmware on this thing? maybe they programed the Ip address to something else as well...? maybe using wireshark? to snipf it? Couse tftpd does not show the messages that router asking the file

@richardlloydusa 2 года назад

Here's a link to an alternative method: www.tp-link.com/us/support/faq/1482/ Try method 2 Try it and report back to me on your results. I want to know if this works so I can consider buying an AX to make a video on it too. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@Rohambili 2 года назад

@@richardlloydusa none of them works... The router address with digi fw is diffrent but i did with both...

@martinpro9773 Год назад

Hello Richard. My Archer AX6000 Router does not load the firmware, it has an endless blue light and I have no connection, the problem started when the internet connection was very slow, so I restarted the router and since then nothing has loaded. I have tried to use your method with this model but it doesn't work, connectivity between the router and the PC running TFTP is never achieved. An additional problem is that, there is no LAN connection between the AX6000 ports and the laptop in any of the 8 ports that this AX6000 has. Any idea of the problem? Thank you.

@richardlloydusa Год назад

I think I know why, TP-Link changed the rescue procedure for the AX series and newer routers. Here's my video on my new procedure: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oAsACOAM4DM.html Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@gkongoli Год назад

Hi i have a zte h108n v2.5 on which i updated firmware to totolink nd300 and cant revert it back. I tried with tftp but seems like router wont enter on recovery mode. Please let me know what to do :)

@richardlloydusa Год назад

This repair is specific to TP-Link routers. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@shelbyv2658 Год назад

God bless you!

@richardlloydusa Год назад

Likewise! Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@zyzo99 Год назад

Just bricked Archer c20i, boot loop, unfortunately tftp rescue does not work ie starts downloading a few bytes but then boot loop again. Countinuous holding Wps button gives no change. Serial link left only..

@richardlloydusa Год назад

Take a look here: openwrt.org/toh/tp-link/archer_c20i Good luck. 👍😀

@zyzo99 Год назад

@@richardlloydusa Thanks, I am aware of that but tftp does not work in his case. Seems i need to solder the pins and try serial/TTL link...,moreover: power button fell apart ))

@richardlloydusa Год назад

Unfortunately I do not have access to a c20i or I could coach you further. Thank you so much again for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@zyzo99 Год назад

@@richardlloydusa Np. Actually ive just managed to solder the pins and got serial link but dont know how to stop the boot loop and prepare for flashing NAND partition/s/, besides there is strange character coding in console/screen, putty/-lots of rubbish or overwritten memory?..

@richardlloydusa Год назад

The garbled characters usually indicate noise from a poor connection or a cold solder. The stop command is "usually" CRTL-C or tpl. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@albertgabi22 2 года назад

I am not getting anything while trying to catch the error in log viewer. What should I do in this case?

@richardlloydusa 2 года назад

First make sure you have set up the IP address EXACTLY like I show in the video. If that is correct and it still does not work unistall and reinstall the TFTP software. Be sure to handle the firewall questions correctly. If all the above does not work you can try turning off the Windows firewall or whatever firewall you are running and see if that works and if all that fails try it in a different computer and again make sure you let the TFTP server access through the firewall. The firewall is the usual reason for no response on the log veiwer. BTW which router are you trying to rescue? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@pr470m8 2 года назад

I've tried but the tftp seems to not fetch any data, tried using a different version and still failed

@richardlloydusa 2 года назад

That's usually caused by the firewall settings, antivirus or incorrect IP address configuration. Try it again and follow my directions exactly and if you still have an issue try it again on a different computer. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@theleoalagar 2 года назад

Sir, I have Deco Mesh M5 who have a problem on the Mesh itself. Ot was stock in steady YELLOW LIGHT. Can you make a tutorial how do I unbrick the Deco Mesh M5? Thank you

@richardlloydusa 2 года назад

Have your tried the rescue procedure I show in the video? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@theleoalagar 2 года назад

@@richardlloydusa Yeah. I also do that but the Deco Mesh don't have any response after the process. I got the same error which is in STEADY YELLOW LIGHT

@richardlloydusa 2 года назад

I don't have a Deco Mesh M5 in a bricked state (I wish I did so I could make a video of how to rescue it) Here is what I would try: community.tp-link.com/en/home/forum/topic/267182 Follow TP-Link's suggestions on this and please report back to me on how it went. Thanks.

@ssquare4603 Год назад

All steps are done but log viewer is not showing anything . My router is TL-WR940N

@richardlloydusa Год назад

Triple check your IP configuration matches the video. Follow my video exactly , step by step. Try all the LAN ports. Try a different cable. Try a different computer. Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@ullas1thomas Год назад

Hi Richard. For me, I have TP Link Archer C50 and All lights are blinking. When I connect the network cable, it doesn't recognise in the laptop. What do I do? TP Link support just says I am out of warranty and they cant help me.

@ullas1thomas Год назад

I managed to get the file transferred. now there's only one power indicator light solid without blinking. but I am not able to go into the console.

@EntesharulOhee 2 года назад

I can't see anything written in tftpd64. I would follow your step perfectly but can't work. Router name: archer c6 v2

@richardlloydusa 2 года назад

It might be your firewall settings. If you can turn off the firewall do so, If not uninstall completely the TFTP program and reinstall it. Make SURE to answer to allow, I believe both check marks in the firewall questions, the TFTP program to pass through the firewall (See the video). Also double check you have the IP address set correctly as I show in the video and last but not least make SURE you have a good Ethernet cable connected to the router in a LAN port NOT the WAN or Internet port and make sure you have a good connection to your computer. Another thing you can try as well is do the whole procedure on a different computer. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@EntesharulOhee 2 года назад

@@richardlloydusa thank you so much

@richardlloydusa 2 года назад

My pleasure. Good luck!

@MohamedOmar-yx6yp 2 года назад

hello , my router is td-w9960 . tftp doesn't respond . tried all expected ips + disabled firewalll + tried 2 devices ! what should I do ?

@richardlloydusa 2 года назад

I would check with TP-Link support to see if they have a quick fix for you prior to trying anything listed below. Try this procedure: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k0J00ksC92M.html Now I don't own a TD-W9960 so I can't verify if the above procedure works but you don't really have much to lose by trying it. BTW I would just try the stock firmware in the rescue mode first without editing the firmware with the hex editor. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@FireWizardRB Год назад

I did it on my C6 vs eu and it downloaded the files, i let it set up everything trough the night, so i didnt check the leds. On the next day i could see that the power led is just on and i couldnt connect via the internet to the router. Any help?. But great Video

@richardlloydusa Год назад

All I have for the C6, I show in the video. Try the procedure again on a different computer if you can. Check this site for further information on the C6: openwrt.org/toh/tp-link/archer_c6_v2 Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@Daniel-ki6wg 2 года назад

please help ...rescue mode archer AX10...not booting after firmware update

@richardlloydusa 2 года назад

I'm bidding on an AX10 on eBay so I can do a rescue video on an Tp-Link AX model. Stay tuned. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@abusaleh4444 2 года назад

I need to build vmlinuz CPE520 v1.1 TPLink

@richardlloydusa 2 года назад

This is all I could find on that: community.tp-link.com/en/business/forum/topic/541160 Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@imithrellas Год назад

This doesnt work for me, my router, Archer vr300, got stuck in booting after a factory reset. The power LED keeps blinking and nothing is happening for multiple hours. I have tried your method, followed it exactly step by step and nothing shows up in the log viewer. Do you have any tips?

@mandyodd Год назад

Please help me with following, i bricked my tp-link c-60 up uploading zip file instead of bin by accident. now the router not able to communicate with TFTP software. let me know how to get out of the mess. thanks

@richardlloydusa Год назад

Sometimes it's the firewall on Windows that stops it. Turn off the firewall and try it again. If that fails try it on a different computer. If you don't meet with success you try these suggestions: openwrt.org/toh/tp-link/archer_c60_v2 and here for the "Debricking" discussion: forum.openwrt.org/t/help-in-unbricking-tp-link-archer-c60-v3/62642 Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@SH-FX 2 года назад

Can i know how to unbrick Dlink Dir 816 router after wrong firmware update? I already tried reprogram the chip and with TFTPD like ur video but no luck. Now my router is only power led on and no respond at all.

@richardlloydusa 2 года назад

What part of the recovery process failed? Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@SH-FX 2 года назад

@@richardlloydusa My router is chinese version and no recovery mode. I press reset button than power on but nothing happen and TFTPD software not showing any log as ur video. So i reprogram chip using CH341A but same result. To try with serial connection but i don`t have serial connector so i using CH341A programmer as serial connector but CH341A driver show as USB not a COM port so i don`t know how to connect it to putty software. I can only test ping from CMD and i get reply.

@richardlloydusa 2 года назад

The good thing is that you're getting a reply there's hope. Have you tried the TFTP procedure in a different computer? Sometimes the firewall settings do not allow the connection. Thanks

@SH-FX 2 года назад

@@richardlloydusa Yes, i already tried it sir... Main problem is my router does not support or cannot enter into recovery mode when pressing reset key. So TFTP software no respond at all. And official firmware come with img extension not a bin so some debrick tool not working too bcoz almost all tools need bin file and my firmware is img extension. Last night i tried with seial connection and i got some unreadable character on putty CMD interface and cannot type any command. I got respond from putty CMD interface everytime i turn on/off my router. On pc internet protocol it was always showning unidentified network. I already tried reprogramming IC, jumping IC, Serial connection and TFTP too. Still no luck so i just give up on that router and really appreciate for your reply sir. I wish u r in good health and can make a lot of video sharing....

@richardlloydusa 2 года назад

Try reversing the TX and RX lines to the router and make sure the connections are good. Other people have had some success with removing the ground wire from the serial connection and trying with just the TX and RX wires. Thank you for watching, commenting and liking. I appreciate it greatly. All the best.👍😀

@eddiemajcic7383 Год назад

Richard. Great video but no luck. TP-Link AC1200 v1.0. TFTP server connection successful. renamed downloaded bin file to name indicated in log viewer. Upload recovery file transferred successfully. However on reboot the original firmware still running.... tried it twice with different firmware even with OpenWrt I suspect this is an ISP issued router and it's locked somehow. Any ideas? Thinking to try serial...

@richardlloydusa Год назад

Are you using the oldest possible firmware from TP-Link? I find the original issue of the firware works best. BTW which firmware is it running? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@eddiemajcic7383 Год назад

@@richardlloydusa can't remember all the detail but it's (EU). The TP-Link firmware I tried was (US). So you're saying if I get the old possible DD-WRT or OpenWRT firmware and try that?

@richardlloydusa Год назад

Give it a shot, not much to lose at this point. Once you get it up and running you can work on reverting it back to whatever state you wish. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@profesorfernandocresta1334 2 года назад

hi Richard, I have a 841hp(es) and I put a wrong firmware, after that, I followed your steps, but It can´t works, all lights are blinking. What can I do? Thank you!

@richardlloydusa 2 года назад

Where does the process fail? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@profesorfernandocresta1334 2 года назад

@@richardlloydusa Hi Richard, it seems charge all the file firmware ( renamed first with "tp_recovery.bin"), afther that all de leds are turned off, but suddenly all the leds blinking. I tried with several files, but doesn´t work.

@izuxvlog Год назад

All steps are done but the log viewer is not showing anything my router is Archer MR 200

@richardlloydusa Год назад

The archer MR 200 is a combination of a cellular modem and a router this makes it a more complicated device. Here is a link to more information on this device: openwrt.org/toh/tp-link/archer_mr200 Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@technicalsohil4063 Год назад

@@richardlloydusa bro please tell me process for archar c20 (us) v5

@yeashuherold4016 2 года назад

can u make a video on TP LINK Archer C6 v2(EU)

@richardlloydusa 2 года назад

This procedure should work on your router. Give it a shot. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@yeashuherold4016 2 года назад

@@richardlloydusa All the procedure is done as shown in Video but in the end my Tp link archer C6 V2(EU) Doesn't starts it remain same......plz help

@richardlloydusa 2 года назад

Have a look at the solutions mentioned on this page: openwrt.org/toh/tp-link/archer_c6_v2 Thanks again.

@rajkej3112 Год назад

My router dont connect , not showing in wifi network, because power led is going auto on/off repeatly

@richardlloydusa Год назад

Have you followed the procedure exactly as I show? Thank you so much for commenting. I appreciate it greatly. All the best.👍😀

@yonatanabate1755 Год назад

my tp link C7 AC 1750 version 2 sun light stack (stay on sun llight) and 5ghz light on but there is no wifi name list showing how to fix this proble anyone help me please

@richardlloydusa Год назад

Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@danteam29 2 года назад

my archer c20 v5 router kept the wifi and internet led on, it does not reset, can i fix it with this method?

@richardlloydusa 2 года назад

Most TP-Link routers have this rescue feature. I would give it a shot. It may work for you too. I have many router rescue videos here: ru-vid.com/group/PLnxXRLSlmSVOlfKcSSQm8VeXKAN3-_urP Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@user-Ali984 Год назад

good work >>>>>>> I have wr 940 n tplink router after upgrade no wifi or plug work or detect and router flash blue orange repeatedly ? how can fix it please

@andrewholanda994 2 года назад

not booting after firmware update. tplink 4300

@richardlloydusa 2 года назад

You're in luck! I have a video on rescuing the 4300 router using using a serial connection if this TFTP method did not fix it. Here is the video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t35Pei_eb6o.html its in two parts here is part #2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wCwBvoueBG4.html Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@imrmr1 Год назад

My computer and tftp program don’t detect the router no matter how much I try 😢 help please

@richardlloydusa Год назад

It may be the firewall settings and sometimes does not reset. Try the procedure on a different computer. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@pritammukherjee3048 Год назад

This video is an eye opener. However I am still hesitant to apply this method on my TP-Link Archer C60. Can you enlighten me on this specific model? My Wii router went dead after a firmware update and right now only the power light signal is green. I cannot even access Tp-link router page from my browser. Regards

@pritammukherjee3048 Год назад

Thanks Mate! it's working after 12 hours of struggle (mostly because of my own lack of knowledge, and the fact that I am using linux mint made it all the more difficult). This and other videos of your channel are very detailed and well explained for a novice like me to get back my modem. Regards,

@richardlloydusa Год назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@pritammukherjee3048 Год назад

@@richardlloydusaThank you... I am following you here now. Looking forward to more such videos :)

@richardlloydusa Год назад

You're most welcome. All the best.👍😀

@county02723 Год назад

I have a C8 that Im unable to rescue any ideas?

@teach_ex1 Год назад

I have tp-link TL-WR941HP, no luck! the funny thing is that when i switch it off it gets connected to PC but when i switch it on it connects once and then disconnects forever then nothing 😅but the lights keep blinking crazy🫡🤣.

@richardlloydusa Год назад

Try 192.168.0.66 and 192.168.1.66 for IP addresses and see if that works. Thank you so much for watching, commenting, the valuable feedback and the very kind words. I appreciate it greatly. All the best.👍😀

@oryen09 Год назад

Que hacer si no carga el archivo ?

@richardlloydusa Год назад

Asegúrese de haber descargado el archivo correcto para el modelo de su enrutador y la versión de firmware correcta. Si no coinciden, su enrutador no permitirá la operación. Gracias Make sure you have downloaded the correct file for your router model and the correct firmware version. If they do not match your router will not allow the operation. Thanks

@sirius368 2 года назад

Help me in archer c20 us v5 Router

@richardlloydusa 2 года назад

Have you tried the method in the video. It should work with this router. Here is a webpage on that router openwrt.org/toh/tp-link/archer_c20_v1#:~:text=Connect%20your%20device%20to%20the,the%20router%20will%20reboot%20itself. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@umarmunir361 2 года назад

Hello sir how i am bricked my tplink router plese help me bricked router thanks

@umarmunir361 2 года назад

Sir help me how i am bricked my router

@richardlloydusa 2 года назад

Have you tried the procedure in the video to rescue your router? Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@iscriptonleague 2 года назад

50 minute fking video i swear

@richardlloydusa 2 года назад

You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@iscriptonleague 2 года назад

@@richardlloydusa Your video has helped me fix my router, its good that you provided explanation to what you do, you also operated on a router i used to have back a few years ago which was nice. I was just frustrated with that router stuff not working and indian tutorials with same length not providing proper solution and wasting my time fueling the frustration. As an apology i have liked the video + also commended for the algorightm Keep it up! :)

@richardlloydusa 2 года назад

Apology accepted. Thanks again. I appreciate it. 👍😀