Tractor Supply Store T-Fence post puller. Review and tutorial. 

Pulled a couple by hand and decided to purchase this tool. Best money spent. Pulled several post with very little effort.

Got mine yesterday. Worked well, had to do a little angling on some but I got em all out. Whole lot better than digging and wiggling for 30-45min a piece. The base does tend to sink into the ground, but it was $50 well spent. Pulled up 15 posts in close to an hour

i worked on a ranch for several years, we had one very similar, worked like a champ! most of the time we just wiggled and pulled and they came out pretty easy!

Just bought one Yesterday and pulled 50 posts with it. I have no complaints very good product

We are 70. Finally got one for our farm…have hundreds of tee posts…thought we would get a tool, after rocking them out, using shovels, even our tractor bucket. First attempt on Ga clay…can’t budge it…neither of us. Possibly one of those post we have to dig out with pick and shovel…and yes, we waited till it had rained a while…unless you have normal soil…it isn’t helping us.

Great video! This video showed me that it is worth the $80 ish to buy this product instead of trying to make my own from wood and cinder blocks❤

Thanks for the video demonstration. I'm buying one today. I should have bought one years ago.

I used this when I replaced all the fencing on the ranch. Advice for all posts keep the device close and keep the post straight. I use a cheater bar when needed be careful of your using a chain it can slip. I removed 4-6 inch round posts and up to 10 inch square posts some buried 4' deep. Don't angel the bar so high you get better leverage about chest height. When pulling big post and older tposts have a second person push the post to keep it straight. When I pulled the deeper round and square posts pull straight up then push the post at and angel so it doesn't slide back down the hole then when you begin pulling again straighten posts. Posts with cement whether wood or pipe remember the whole you made isn't always perfect straight up and down sometimes the cement is fatter st the bottom or the middle. I have never had a posts on the property I couldn't pull just take some common sense and testing what works best with this device.

Mine is square tube and a t-post fits in it to make a perfect cheater bar. Probably the best 50 bucks I've spent outside of Mexico. LOL

The place where I work manufactures this. We sell it for 16.37 cad per piece to our Canadian supplier

Dangerous. At about 1:35 the post nearly did a 'headshot'.

Excellent, thank you for sharing. Thumbs up 👍👍👍

Thanks brother! Very helpful, maybe now I can get mine out of our New Mexico mountain caliche 👍

Great video, thank you for sharing this. Now do a 4"X4" please?

Thanks for the instruction, my Amazon tool had no info. 2600' of fence posts!

Put it as close as you can to the bottom of the Tee post, it works better.

Simple and smart

Thanks for the video!

I currently purchased this very item. It works well, but only if the T-Fence post is buried up to about the top of the steadying blade (that's riveted ~12" up from bottom of post). AND, if the post is worked back an forth, side-2-side (loosening the soil near its top) prior to pulling. My posts I've had buried by 24"-34" deep, the soil well compacted & somewhat dry, clay at bottom, and placed ~15 yrs+ ago. For this puller to work, I had to dig out as much soil as possible to reach down & expose to the top of the steadying blade, then rock them manually, (back & forth, side-2 side) loosening the soil about the top of the post, and then the puller worked nice. But with a chain (using the nice hook that's supplied with this puller). (I'm working within confined space, as these posts are within an area of arborvitaes, posts used to steady said trees when younger). Suggestion: this tool could use an additional hole in the upright portion, moving the fulcrum closer to the chain hook/C-grip, thus multiplying the applied down force on the lever, giving it much more mechanical leverage.

Thank you for sharing.

Thank you!!! So helpful.

Thanks for the video.

Will this work to pull out a 1.9" OD dock post pipe?

i would set the puller on a piece of old plywood for support, i see a lot of theses vids where the base sinks into the dirt considerably.

worksa a lot better if you put the base up against the post

Are you satisfied with the gauge of metal in it? Never mind, I'm heading to Tractor Supply tomorrow and see it for myself! Good video. Thanks for sharing!

...in some parts of the country, soak the ground before removal.

Elizabeth L. Johnson said, Thanks so much! I knew I needed help. Would this work adequately on my t post that is in the ground 18 inches?

The tool you use to drive the t pole takes it out of the ground faster and all you need is a block if 2x4 to do it. And it's even faster.

Will this pull out large tent stakes?

Will it work on chain link fence posts?

The T posts I have don't have any of the ridges, just smooth steel. Will this still be able to grip It?

Any idea how I would get a piece of angle iron out of the ground?

Boght one of these today I'll know if it works in a few weeks.

You have to very carefully because you can hurt your hand.

There are instructions?! 😂

I usually just wiggle the shit out of it until it comes up

this is not suited to pull broken wood post