Traxxas Summits in Action! 

Thanks heaps mate, I really appreciate all your support and fantastic comments! (0:

Thanks Tybo, yeah I had a lot of fun with nitros back in the day, but also many frustrations. They did almost drive me out of my mind. Luckily they invented brushless and I could continue with the RC hobby ha ha

Thanks for that Torro, it was a lot of fun to make (0:

Yeah they sure do. They are just so reliable, you know you can take it out and run it hard and not have any trouble with it. Thanks Heaps Susan (0:

=) You're welcome.

Susan Millard (0:

Thanks Lola, I'm glad you enjoyed it (0:

Thanks Cedric. Yes if it's radio controlled, then I have to have it ha ha. Have you seen the new dji Mavik Pro? I nearly bought one today, but they are quite expensive. I had to reign in my excitement (0:

Jax Teller RC Yes i saw it, impossible to miss it though lol I don't like it, it's easy to carry but for me it's too small and i don't really trust multirotors on 3S! If i have to buy another multirotors, it will be the Phantom 4 for sure lol

ABMNS PRODUCTION I think it's amazing, it has all the functions and can travel 7kms! and fly for 20mins. I am going to wait and see how it goes

I just sat my slash body on the summit when I was working on the slash and thought; man that looks really cool! So i went out and bought a new slash body and new summit body posts. I had to cut the body posts shorter and drill the holes in the body to suit. I also had to cut the wheel guards to fit the big summit tires. I love it (0: Thanks man

Thanks mate, yeah this is a fantastic place, I have been doing all my vids here lately, even the race drone ones. It's only a 3 minute drive from my house, so I can just go home and grab more batteries or do a quick repair or get a different RC. Lovin it (-:

Thanks mate, I was trying to do the whole video in that super slow motion, because almost all those shots looked great like that, but I just couldn't find music that went with it, so decided to go for a super fast chopped edit instead.

Well it worked. Nice cuts

bdseidler Cheers bud

Thanks heaps Sator (0:

Thanks mate, yeah they are so Cool, love them (0:

Thanks Stephen, glad you liked it mate (0:

Love it mate cool truck

Thanks heaps, I'm so happy you enjoyed my vid (-:

Ha ha, thats so cool mate, wish I was there hittin some big jumps (0:

Thanks heaps Bob (0:

The Slammit loves it, I have put the summit body back on it and have hooked up some fpv gear on top. have been driving it through the goggles, but the footage is way too shaky for a vid. Thanks heaps mate (0:

Yeah I know what you mean about the shaky on board vids. I don't think I'll do anymore of those kind. It's even worse on a 1/16 scale.

R/C Arsenal Very hard to remedy, I am going to try a cheap brushless gimbal

I hope that works! I'm looking forward to seeing how it comes out!

R/C Arsenal I have been watching other peoples vids who have done it and it works for the side to side movement and undulating up and downs, but there is still a lot of gitteriness

Thanks mate, yeah it's been too long. Damn computer!

Thanks man, Yeah I love the Slash body on there. Gives the Summit a whole new life (0:

Thanks Delvis, I'm so happy you enjoyed the vid (0:

Thank you, it was a fun day out (0:

This vid was from a fair while back, my computer has been down, so I haven't been able to do any editing for ages. Up here it's sunny and windless all week, then pours down and is windy as hell on the weekends. This weekend is the perfect example. It's blowing a gale out there ha ha

LOL typical... Thursday it was a good day, breezy but nice and sunny... it was the only good day in ages and prolly for another week but I was rostered on :/

Ken Oath The gods must be crazy ha ha

Thanks Heaps mate. Yeah Summit is my go to car for when I want to just have a great fun day with no breakdowns (0:

Thanks mate (0:

Thanks heaps mate (-:

Thanks mate (0:

Ha ha ha, yeah thats right, bloody pain in the ass those things! Thanks heaps mate (-:

Thanks Jeff, I'm super stoked you enjoyed it mate (-:

Cheers Bro!

Yeah Summits are always a lot of fun, great RCs! I just had to cut the wheel arches quite a lot to allow for the massive tyres. I also had to buy new body posts and cut them down, but very easy to do. Those Slash bodies are expensive though. Cost me $85aus!!

You pay a premium for bodies in Australia

***** Everything is expensive here

Thanks man, I'm glad you enjoyed it (-:

Jax Teller RC for shure!

Cheers for that, I'm glad you enjoyed it (0:

Thanks Shaun I appreciate it mate (-:

Thanks mate (0:

Thanks mate (-:

Thanks mate (0:

Thanks mate (0:

Thanks David, I appreciate it mate (0:

Cheers mate, I was trying to make this whole video a super slow mo one but just couldn't find music to match. Most of the shots in this vid looked great slowed right down. Oh well it works as a super fast edit ha ha (-:

Thanks mate, it was a lot of fun (-:

Jax Teller RC i bet =)

Thanks Heaps Asplenia, I always enjoy making vids with the Summit. Always looks great and is easy to work into a decent edit. Cheers bro (0:

Thanks mate (-:

Thanks mate (0:

Thanks Lorenzo, I appreciate that mate (0:

Thanks heaps Kevy (-:

Thanks bro!

Cheers bro (0:

Thanks mate, yeah I bought a new set of mounts and cut them shorter and just drilled the slash body to suit, also cut the guards on the body a bit as well. But very easy to do. Kept the original mounts so I can put the summit body back on when I want to, I have an FPV set up on it and drive it with my goggles, it's fun, but the footage is way too shaky to make for a good youtube video ha ha Thanks heaps for subscribing, and I'm stoked your enjoying my videos (-:

Summits are truly amazing RC Vehicles, nothing will stop them and they are a ton of fun in crawl mode or high speed mode. Close up views and slow motion works great for RC videos, easy with crawlers, not so easy with fast cars ha ha Thanks heaps man (0:

Jax Teller RC ye closeups aren't so easy with my E-revo lol. Gopro mounted is my next ambition, hopefully don't go breaking that.

***** I have tried mounting the gopro to the car, it's usually too bouncy and the footage is horrible to watch. I put the gopro on the bottom of my TX an get down on my knees and follow the car as it goes past, works really great, or put the gopro on your head and same get right down close to it and follow it as it goes by, you need to think like a tripod though ha ha

Jax Teller RC Think like a tripod, be like a tripod Haha. I really appreciate all your help! I have stuck my Gopro onto my drifter on a smooth car park and that has gathered a few views. Trial and error I guess.

***** Yeah smooth ground is fine, I have an FPV setup on my summit, which is ok for driving with the goggles, but the camera footage is horrible ha ha

Yeah good idea but you will need to get steel axles, those plastic uni joints just can't take those big tires. The car in this video is actually a Summit with a Slash body on it (0:

Thanks mate (0:

Thanks mate!

Thanks heaps mate, it is totally stock, except for the slash body and it's running on 2 x 2S

It's a Summit with a Slash body. I had to stiffen up the shocks a lot so that the tires didn't travel so far upwards as much. I had to buy a new set of body post mounts and cut them down to suit the slash body profile and I also cut quite a lot of the body around the wheel arches, I think it's great. I have the original body posts so I can still put the Summit body back on whenever I want (0:

Jax Teller RC thanks!

Lego God (o;

It's definitely my go to truck, that I know won't break down and I can just have a great day out with! Thanks heaps mate (0:

Thanks mate, yeah it's a Slash body on my summit, I call it a Slammit (0:

:-)

Thanks Marty, I appreciate it mate (0:

Thanks heaps mate (-:

Ha ha, thanks mate (-:

your welcome try some 40 foot gapped jumps on it😉

Riley Plummer I did some pretty big jumps with it a couple vids back

Oh cool what's the biggest jump you have ever done with an rc?

Riley Plummer Probably the one in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iOPq5VbI1lI.html

I put a Slash body on my Summit, so I called it a Slammit, mainly because Summash sounded a bit silly ha ha

Hi mate, yeah I bought a new set of summit mounts and cut them shorter and just drilled the slash body to suit, also cut the guards on the body a bit as well. But very easy to do.It is a Black Mike Jenkins body, I don't know what code number, any 4x4 slash body will do

Thx mate 😊

ROBERT .G TIBELL JOHANSSON No worries

Awesome brother, I hope you enjoy my channel. I subbed you back (o:

Please,jax (0:

Thanks mate, this is in Perth Western Australia about 3 minutes drive from my house (0: