Traxxas Xmaxx 8s head to head race. Hobbywing Max6 vs Hobbywing Max5. Big can vs Stock motor

Подписаться 465

Просмотров 3,5 тыс.

50% 1

#rcbashing #rccars #rcmods #traxxas #xmaxx #m2c #vitavon #hobbywing #xmaxx #xmaxx8s
Two xmaxxs with two different motor systems.
How fast is the Xmaxx 8s with a Hobbywing Max5 ESC and an 800kv big can motor with the vitavon mod 1.5 gearing (25t/30t).
V's Another Xmaxx 8s with the preferred combo? Stock 8s motor being controlled by the hobbywing Max6 ESC. with mod 1.5 gearing also (10t/15t).
One is low cost and the other has a high price tag.
We speed test them both and also drag race them.
Which is the best combo 🤔

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@bansheebandithot350 2 года назад

That’s what the people want to know with xmaxx😎😎👍🏻👍🏻

@joseCalderon1976 2 года назад

The stock motor in the Xmaxx is good, but my experience is that it starts loosing speed and torque long term. It's just too small for the Xmaxx. That's been my experience. My Max 5 and 1100kv 5687 motor with 25/35 gearing is still going strong after like two years.

@watersidebashers.9792 2 года назад

That's good to hear. I am happy with my xmaxx motor system with the 800kv for now. I've had no problems except it destroys diffs now 😆 I have got an option to get a vitavon 30t pinion gear or to change the motor to 1100kv. I'm still trying to work out what's best to do. But yeah the max5 combo hardly got hot at all, which I was pleased about. Thanks for sharing your experiences with me 👍💯

@joseCalderon1976 2 года назад

@@watersidebashers.9792 I had to put a shim in front of the outputting drives, put aluminum diff cases from Traxxas (I used the one meant for the center diff), put aluminum diff covers and that has helped a lot. WFO drive cup sleeves are a must on the diffs too. All that was done for my front and rear diffs 👍

@watersidebashers.9792 2 года назад

@@joseCalderon1976 thats great advise. That should keep the gear mesh nice and tight.. ill give that a try. Thank you 😊

@이타치-e3m 8 месяцев назад

Max6 차량은 순정모터에 피니언, 스퍼 기어는 몇입니까?

@4200Shields Год назад

Pardon my ignorance (I’m still running stock)…what is “mod 1.5 gearing”, and what is the appeal?

@watersidebashers.9792 Год назад

That's OK. Mod 1.5 is the pitch of the pinion and spur gears ⚙️ it's the gap between each tooth. Mod 1.5 is the biggest gap which means there chunky and less likely to break. They're a lot tougher than Mod 1 for example. They cope more with putting bigger motor and more powerful motors in. Mod 1.5 gears are noisier though, so you loose the smoothness.

@metoo3918 Год назад

@4200Shields The gear teeth are bigger. This means that for any given material, the tooth is less likely to break. It also easier to get the mesh correct...or should I say, more tolerate to poor mesh.

@4200Shields Год назад

How do you get the gear mesh right on new Traxxas models..will the stock motor pin system still work?

@SolRayz 2 года назад

Now do the HW 1100kv with the Vitavon gears.

@watersidebashers.9792 2 года назад

Nice, ill give that a try. That will turn it into a completely different beast 😎💯

@jonvoogd511 3 месяца назад

That 800 kv is definitely a beast , 55 mph what a beast, I like. Great video

@Sheldinator Год назад

what gearing was on the stock one?

@BuddyBuilt Год назад

Its in the description, just click on video title right below the video and i should bring the description up.

@ingloriousbuddah Год назад

tumble wumble

@maximx963 2 года назад

Cool video, you have to subscribe right away,

@watersidebashers.9792 2 года назад

Thanks buddy. We've been doing this just over a year, we're growing, with many ideas with lots of great content coming. Thanks for the sub you legend 💯🚀😎👍