Triple Neo Speed - Time Lapse Build

Подписаться 11 тыс.

Просмотров 441 тыс.

50% 1

In this video I will show you a time lapse build of the Aeronaut Triple Neo Speed. The fuselage consists of a GRP part combined with a carbon fiber tube. The wings are build as a classic balsa rib construction. The quality of the kit is very good with a fine selection of balsa sheets and a high accuracy of the laser cut parts. As usual for this kind of kits you have some room for own modifications. For example I replaced the original pulltruded carbon tube with a roll wrapped carbon tube to get more torsional strength. The trailing edges of the wings were reinforced with a carbon roving. To have a more carefree handling of the wings during attaching and removing I added 44g glass fiber to the inside of the skin in the area of the inner two rib fields. I strongly recommend to close the brass tube for the torsion rod as shown in the video. This prevents the torsion rod from sliding to one side which in the worst case could pull the rod completely out of the other wing. During flight this would definitely be a catastrophic failure.
All in all I really enjoyed the build and can recommend it for anyone who has some basic experience in balsa building. The good build instructions leave almost no room for mistakes.
Also check out the flight video of my Triple Neo Speed: • Triple Neo Speed - Fli...
Link to Aeronaut: aero-naut.de/
Link to Triple Neo Speed: aero-naut.de/produkt/triple-n...
Specs:
Wingspan: 1810mm
Length: 1200mm
Wing area: 29,5 dm2
Weight (AUW): 990 g (in my configuration)
RC functions: rudder, elevator, ailerons, motor
My configuration:
Motor: Aeronaut actro-N 28-4-880, 28x34mm, 880kv
Prop: Aeronaut CAM-Carbon 11 x 8 folding props
Battery: SLS Quantum 1800mAh 3S 30C/60C (the 2200mAh shown in the video was too heavy to achieve the CG without additional weight in the tail)
ESC: Graupner BRUSHLESS CONTROL + T 35
Receiver: Graupner GR-12 HoTT, 6 channel
Servos: Graupner DES 428 BB MG for elevator and ailerons, Graupner DES 476 BB for rudder
Cover: ORACOVER light transparent blue, ORACOVER black, ORACOVER white
Stickers: d-c-fix black vinyl
Other parts and material:
Roll wrapped carbon fiber tube 10 x 9mm (Seta-Tech 1110 - seta-tech.gambiocloud.com/CFK...) to replace the original pulltruded carbon fiber tube from the kit
Prop adapter 4,0/8 (Aeronaut AN712404)
Wing/fuselage cable connetors: Multiplex MPX M6-50 (MPX 1-01221 and MPX 1-01222)
ORACOVER hotmeltglue (Oracover 960)
Screws for servo attachment to frame: 1,7 x 6 mm (minischrauben.com/blech-holzs...)
Screws for servo plate attachment to support: 2,3 x 8 mm (minischrauben.com/blech-holzs...)
Link to free STL files for 3D printed parts (MPX connector mounts, Servo frame): drive.google.com/file/d/1KMNw...
Note: This video is not sponsored. I only recommend the stuff I used and that worked well for me.
Cutting machine:
BROTHER ScanNCut SDX1000
Cameras:
Sony HDR-CX730
GoPro Hero 4 Black
Microphone:
Rode NTUSB

Опубликовано:

24 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 507

@nestwolfsteiner2292 2 года назад

Great build instructions, lots of technics which can be used in many similar builds. Many thanks for the awesome video!

@bavarian_rc 2 года назад

Many thanks for the positive feedback!

@tallpine67 2 года назад

Fantastic video. I learned new techniques because you showed so much detail in every single part of the build leaving nothing out. As a scratch builder from plans I'm always looking for new true build videos and this is one of my favorites. You are a tribute to the hobby and I am now subscribed looking forward to more videos like this. God bless

@bavarian_rc 2 года назад

Thanks a lot for your kind words. That means a lot to me! I was trying to be on one side entertaining but also able to share my way of building with the community. With every build and every build video I learn more. That is what I really enjoy… well apart from flying of course 😃 I have just started a new build project but the weather is too nice to spend a lot of time with building. So you‘ll have to wait a bit for the next video. In the meantime I will upload a time lapse video of the painting of my foam board Messerschmitt Me-410… probably today! Greetings from Bavaria

@not-fishing4730 2 года назад

Thanks for the video, being an old stick builder from the 60's you showed me a lot of newer techniques I can use although I'll still use my T-pins and wax paper.

@bavarian_rc 2 года назад

I learned a lot of my building skills from my father when I was young (in the early 80‘s). Combining traditional techniques with modern stuff like GRP, carbon or 3D printing is real fun. Still learning something new with every build.

@Ichhabekeinenuser 2 года назад

Extrem gutes Video! Super Sauber gebaut! Verstärkung mit dem Roving und Matte , Klasse! Gerne mehr so toller Bauberichte, Danke.

@bavarian_rc 2 года назад

Vielen Dank! Freut mich dass es Dir gefallen hat. Die nächsten Projekte stehen schon bereit… aber welches von den vielen soll ich nehmen??? Zu viele Ideen, zu wenig Zeit 🤣

@KetilDuna 2 года назад

What a trove of building tips - thank you so much for this!

@bavarian_rc 2 года назад

Thanks a lot for your feedback! Happy to share my way of building with others.

@KetilDuna 2 года назад

@@bavarian_rc it is both humbling and inspiring to watch. So much joy to build and fly when putting some effort into it. A very productive building season is soon at an end for me, but already drooling over projects for the next spell of cold and dark!

@bavarian_rc 2 года назад

I still have projects in the pipeline… and honestly there is not really a building season for me, I build all year long 😜 But my current project won‘t end up in a video, this one is just for me…

@flymachine 2 года назад

I respect massively anyone who still has the patience and skill to build and cover in this world of ultra ready to fly, I did secretly wish it was a pure glider though but with that speed wing I imagine some high speed passes are in order.

@bavarian_rc 2 года назад

There are the ones who like building and there are the ones who like flying. I like both! So the process of building a plane is something I really enjoy. The Triple Neo would also be a great pure glider but the next slope is more than 20 km away whereas my usual flying area is 2 minutes away from home. So having a motor is the most practical setup. Despite being a light weight build the Triple Neo can get pretty fast. Top speed was around 150 km/h in a dive. But due to the low weight it slows down pretty quickly. So typically I don‘t go too fast but just enjoy the great ability to float from one thermal to the other even over greater distances.

@savxssfan Год назад

Das ist für mich Kunst. Danke, dass du dir die zusätzliche Mühe gemacht hast, es mit der Kamera einzufangen.

@bavarian_rc Год назад

Danke!!! Manchmal hab ich mir auch gedacht „muss das filmen jetzt sein“ aber ich gebe zu ich schau ab und an meine eigenen Bauvideos an… das hat was beruhigendes. Darüber hinaus ist es schön so viel positives Feedback aus der Community zu bekommen. Das motiviert mich zu weiteren Bauvideos.

@Unamatrix01 Год назад

Fantastic build of the Triple Neo Speed.🔥🔥🔥

@bavarian_rc Год назад

Thanks! I really enjoyed the build ... and it flies fanastic!

@genetung8590 2 года назад

What a professional level of construction! Wow

@bavarian_rc 2 года назад

Thanks! The kit is really well thought through and there were only few things where I deviated from the kit or from the build instructions. But that was maybe more due to personal preferences.

@siggy101 2 года назад

What a fantastic video. I too was sure I would skip to the interesting part and then found I had watched every second, even rewound a few places to enjoy your work again! Truly excellent building skills and techniques. Safe landings!

@bavarian_rc 2 года назад

Thanks a lot, that makes me a little bit proud 😊 It is this kind of feedback that keeps me motivated to make more of these videos. In the meantime the Triple Neo had its maiden flight. It just needed 1 click of trim and flew perfect. The 2nd flight was already close to 30 minutes without any thermals on that day.

@siggy101 2 года назад

@@bavarian_rc Well, with that attention to detail during your build, I am not surprised that the maiden was a huge success! Congratulations. I look forward to the next videos of you building the pure glider fuselage and then Thermic and RES wings to complete the set ;)

@bavarian_rc 2 года назад

Before coming to the RES and Thermic I have some other projects on the bench 😜

@mdellertson 2 года назад

Amazing work! I would love to see it fly!

@bavarian_rc 2 года назад

Thanks! Check out the flight video: Triple Neo Speed - Flight Video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5njUNvx_JF8.html

@mitchilito99 Год назад

Best way to spend an hour EVER! I want one. . . .

@bavarian_rc Год назад

Thanks a lot! You just made my day. Happy that you liked it.

@Yngve_Dalen 2 года назад

Wow, fantastic video. Thanks a lot👍👏

@bavarian_rc 2 года назад

Thanks mate! Great that you liked it.

@danmartinrc 2 года назад

You have great attention to detail. I learned a lot of little tricks from this video. Thanks!

@bavarian_rc 2 года назад

Thanks a lot. I am learning day by day with every build and I am happy to share this with the community.

@raymond4191 Год назад

Genius kit - and great build video .. simple and straight forward 😀👍 I gave my old version Speed kit away to a kid and his father .. happy for that - but a tiny regret now. Perfect for a kid to learn building with assistance.

@bavarian_rc Год назад

Thanks a lot. I really love the Triple Neo. Next I will add the Thermic wings… and of course I will do a video about it. I am always happy if people get inspired by my videos or can pick up the one or the other build technique. There is so much that kids can learn from a balsa kit assisted by someone that has a bit of experience … it was the same for me when I was a kid back in the 80‘s when my father showed me everything about building.

@severinallemann 2 года назад

What a awesome build!

@bavarian_rc 2 года назад

Thanks man, great that you liked it.

@donicm4562 Год назад

Mega. Lieg hier so rum nach einer Feier und hab plötzlich Riesen Bock auf einen Zott Sahne Erdbeer Joghurt. Aber im Ernst. Super Video. Auch Nachts um 4. Ich werde mir den Triple als Thermic Version holen. Zwar gebraucht aber Riesen Respekt an die Erbauer. Danke für Ihre Videos.

@bavarian_rc Год назад

Nachts um 4 mein Bauvideo anschauen… wie cool ist das denn? Freut mich dass es Dir gefallen hat. Hoffe Du hast nen Zott Sahne Joghurt im Kühlschrank gefunden. Wenn mir die Becher ausgehen muss die ganze Familie Zott Joghurts essen. Abgesehen davon dass sie lecker sind, sind das die besten Becher. Die halten sogar Aceton aus. Hab mir mittlerweile auch noch die Thermikflächen bestellt. Werde ich mir im kommenden Winter bauen. Aber jetzt muss ich erst mal meinen kleine Puri (aus der FMT) fertig bauen. Video gibt‘s natürlich auch.

@StrangerInAStrange Год назад

That looks like a well designed kit, including the fuselage jigging. Excellent workmanship - it was a pleasure to watch! I too picked up a some building tips that I can use. Great video production quality. Thank you.

@bavarian_rc Год назад

Thanks a lot! The kit is really nice and an absolute joy to build. I will soon start the build of the thermic wings. Will be interesting to see the difference between speed and thermic wings.

@rudypoirier7793 2 года назад

What PERFECTION. 10/10 Excellent Work. Thanks for the entertainment! Rudy in NB Canada. 👍👍

@bavarian_rc 2 года назад

Thanks a lot for your kind words! Great that you liked it. Greetings from Germany to Canada 😃

@bob2161 Год назад

That's a very good looking model. I learned many new things by watching your skills and techniques. Thanks for making such a great video. I subscribed.

@bavarian_rc Год назад

Thanks for your feedback… and for subscribing 😃 I plan to do more builds like this one so stay tuned.

@michelpetrus Год назад

So clean, and very instructive. Many thanks.

@bavarian_rc Год назад

Thanks! I am glad you liked it.

@andyMSH700 Год назад

well done...there is something about building in balsa that is very relaxing and rewarding...it also sticks very well once you know what you are doing.

@bavarian_rc Год назад

Thanks a lot. You are so right about balsa builds! Going back to balsa after many years of foam, foamboard or GRP was my best decision!

@lazer2997 Год назад

Really nice video! It has me inspired to join the ranks again, but more for the love of building. Meditative watching your skilled and exacting build style, thank you.

@bavarian_rc Год назад

Thanks a lot! I am an expensive combination of loving to build and loving to fly… keeps filling my hangar and draining my bank account 😂

@MiceliCreations 2 года назад

Nice plane. Cool build. Bet she flies wonderfully :)

@bavarian_rc 2 года назад

Thanks! Flies fantastic. Have a look at the flight video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5njUNvx_JF8.html

@lookvik610 Год назад

Великолепная работа, Браво! Смотрел на одном дыхании.

@bavarian_rc Год назад

Thanks! Great that you liked it.

@gerdschmidt6196 Год назад

@@bavarian_rc m

@marcoaurelioxaviermoreira4631 2 года назад

Congratulations on a great job, buddy!!

@bavarian_rc 2 года назад

Thanks a lot my friend!

@peter-koester 2 года назад

Erst dachte ich: "Hui, 'ne knappe Stunde, na ja spulst'e halt vor, wenn es zu langatmig wird." Aber dann habe ich es doch komplett geschaut. Super Video und ein gelungener Flieger. Noch eine Anmerkung: Bei der Holmverkastung hätte ich die Maserung senkrecht gelegt.

@bavarian_rc 2 года назад

Danke, das ist das größte Lob das ich mir vorstellen kann. Hatte auch ein wenig Bedenken ob ein fast 1-stündiges Video auch angeschaut wird. Mit der Holmverkastung hast Du natürlich recht, nach allen Regeln der Kunst sollte die Maserung senkrecht sein. So massiv wie die Epoxy Verklebung ist sind die Balsateile aber vermutlich eh nur optischer Natur 😜 Jetzt heißt es warten auf Erstflug Wetter…

@petertrigiani3129 11 месяцев назад

Timing is perfect all things considered!!! Life offers its speed bumps …so we simply need to ease back on the throttle at times!!! Ciao!!!

@bavarian_rc 11 месяцев назад

Wise words!!! Ciao my friend!

@bullybrutusandrob393 2 года назад

Super clean build !:)

@bavarian_rc 2 года назад

Thanks mate!

@mrmanojrs 2 года назад

That's a very clean build. Awesome.

@bavarian_rc 2 года назад

Thanks a lot. Great that you liked it. Cheers!

@eddyromero1192 Год назад

Ce fabricó pero no bolo no lobo Eddy Romero toledo técnico de aviación 18 años de trabajo en la Aviación bibo en Cuba provincia mayabeque San Nicolás de baris

@bavarian_rc Год назад

Sorry, google has some issue translating that and I don‘t speak Spanish

@estern001 2 года назад

Great job! Who would down vote this? The RTF gang? Love the transparent blue. You always get to admire your handiwork.

@bavarian_rc 2 года назад

Thanks a lot! It is always a great sight when the sun is glowing through the transparent blue part of the wing. Love this plane!

@Mountian-Zen Год назад

Thank you, this is beautiful. You are an artist.

@bavarian_rc Год назад

Thanks a lot 😊 Currently I am building the alternative Thermic Wings for the Triple Neo. Video will come…

@Joyplanes 2 года назад

I love this!

@bavarian_rc 2 года назад

Thanks a lot! ☺️

@tuomassyrjaniemi 2 года назад

Sooo nice! Learned a lot from this one. You just made me to think ordering a good old balsa model. 😅

@bavarian_rc 2 года назад

Thanks a lot! Go for it, balsa is really something beautiful 😃

@bf760 Год назад

what a great video. your work is perfection.

@bavarian_rc Год назад

Thanks a lot! I am happy that you liked it.

@ichsonstkeiner7769 2 года назад

Thanks for the video. I'm going to build the same model soon. I built my last model over 20 years ago.😉

@bavarian_rc 2 года назад

Thanks! Also for me it was my first balsa build since my youth… so more than 30 years 😂 You will love the Triple! Been flying it yesterday in quite difficult thermal conditions and still had 1:10 h of flight time. Enjoy the build!

@bron9242 Год назад

I love it, great job!👍

@bavarian_rc Год назад

Thanks a lot!

@davidharrington956 Год назад

That was so awesome dude.

@bavarian_rc Год назад

Thanks buddy!

@Mike-pb5bj Год назад

freaking nice video my friend ! love that 👍

@bavarian_rc Год назад

Thanks mate! Great that you liked it.

@miahb2598 2 года назад

Super Aufbau.Schönes Modell.

@bavarian_rc 2 года назад

Danke! Hat auch richtig Spaß gemacht den Flieger zu bauen

@bigsmokerc 2 года назад

Fantastic video!!!

@bavarian_rc 2 года назад

Thanks. Great that you liked it!

@Leos-World 2 года назад

Sehr schöner Zusammenbau!👍

@bavarian_rc 2 года назад

Danke!!! 😃

@ryszardkasiuchnicz283 2 года назад

Good job, gratulations!!

@bavarian_rc 2 года назад

Thanks, great that you like it!

@pater111 Год назад

Questa mattina ho fatto il collaudo del triple ed è stato fantastico grazie ancora per il tuo tutorial che mi è stato molto utile

@bavarian_rc Год назад

That's fantastic news! I am very happy that my tutorial was helpful. I wish you many successful flights with your Triple Neo.

@free-birdrocker8809 Год назад

We southern boys call a non ARF a box of sticks. Deffo' not a kit for beginners. Good job bro!

@bavarian_rc Год назад

Thanks buddy! After some RTF and foamies it was such a joy to work with real wood and build it yourself. A box of sticks… love that one! Cheers

@free-birdrocker8809 Год назад

@@bavarian_rc I have a box o' Stix Great Planes Electro stick with the WW-1 Red Barron mono Kote paint scheme, and it has a out runner electro motor. I am working up courage to fly it...right now I'm still learning.

@bavarian_rc Год назад

That one will certainly look awesome!

@alanmydland5210 Год назад

Man I love to crash foaming, so easy to glue a to b and c and fly

@bavarian_rc Год назад

Oh yes, did that before. Now I just try to not crash 🤣

@bamboozledbob3298 Год назад

My builds so far usually have consisted only of unpacking a foamie and maybe glueing some servos in. This really makes me appreciate the craftsmanship and experience that goes into building a plane like that.

@bavarian_rc Год назад

Thanks a lot! You really have to try building a kit or something from scratch, it is so rewarding to see the final product fly! I enjoyed it a lot!

@iwontreplybacklol7481 Год назад

I sweat bullets just gluing a foam wing together, lol

@bavarian_rc Год назад

😂😂😂

@DZARO Год назад

You work so clean, my OCD is satisfied from 00:00 to 54:45 constantly at 100% !

@bavarian_rc Год назад

Ha ha, that's great! Always feed your obsessions ... I certainly do when building an RC plane 😂 Great that you obviously liked it. That comment made my day!

@eliseugoncalves767 Год назад

Fantastic, congratulations.

@bavarian_rc Год назад

Thanks! Great that you liked it

@_namenloses_4593 2 года назад

Jetzt hab ich was cooles anzuschauen bevor ich schlafen gehe 🙃

@bavarian_rc 2 года назад

Viel Spaß beim schauen ... und ja nicht einschlafen 😉

@christophostrowski3382 2 года назад

Was für eine schöne Arbeit

@bavarian_rc 2 года назад

Vielen Dank!

@garryperrin2408 2 года назад

Super video!

@bavarian_rc 2 года назад

Thanks 😃

@spikejones8684 Год назад

Thanks,perfect work!👌🇨🇿👋

@bavarian_rc Год назад

Thanks a lot, great that you liked it!

@funflyergermany1014 2 года назад

Top gebaut, wirklich 10/10 so sauber und perfekt... Die Qualität vom Video ist auch sehr gut und hochwertig. Weiter so;)

@bavarian_rc 2 года назад

Danke! Der Bau hat auch richtig Spaß gemacht. Weitere Balsaflieger sind in Planung ... wieder mit Video. Nachschub ist also in Sicht.

@funflyergermany1014 2 года назад

@@bavarian_rc Da freue ich mich schon drauf! Ich hab auch noch einen Luxx von Aeronaut zu bauen, allerdings ohne Querruder:/ ob das Spaß macht?

@bavarian_rc 2 года назад

Bauen macht immer Spaß… und beim Fliegen kann man ja mit ordentlich Power nachhelfen 🤣

@Flybrei 2 года назад

Schönes Teil und super Video 👍

@bavarian_rc 2 года назад

Danke! Aktuelle Windstärke ist halt nix für den. Da müssen eher Flisel ran 😜

@Flybrei 2 года назад

@@bavarian_rc 😆👍

@flaperon35 Год назад

Fantastic video

@bavarian_rc Год назад

Thanks a lot mate!

@KAJBS 2 года назад

Awesome video

@bavarian_rc 2 года назад

Thanks man, great that you liked it!

@apollo2k615 2 года назад

Respekt, hätte nicht gedacht, dass das Modell so viel Arbeitsschritte benötigt 🤯

@bavarian_rc 2 года назад

Ja, das ist was für „Holzwürmer“ die gerne bauen 😜

@kowinator1 2 года назад

Wunderschön 😍

@bavarian_rc 2 года назад

Danke !!! 😊

@oldamech4954 Год назад

Moc děkuji krása

@bavarian_rc Год назад

Thanks, great that you liked it!

@sorryimajerk735 Год назад

GOOD THING YOU COULD JUST DESOLDER THE SERVO CONNECTOR HEY BUDDY!!!! LOL. THANKS FOR SHARING SUCH A NICE BUILD

@bavarian_rc Год назад

Not sure you could desolder a crimped servo connector 😉😂 Happy that you liked my build!

@grzegorzskowronski2034 2 года назад

Piękny model! Zdziwiły mnie tylko zawiasy sterów i lotek z taśmy klejącej!!!! W filmie pominięto moment sprawdzania położenia środka ciężkości.

@bavarian_rc 2 года назад

Thanks for your comment. Sticky tape is a quite simple and efficient way to make hinges. They are quite long lasting and if need be can be easily replaced. There was nothing magic to the CG checking so I didn‘t put it in the video. Basically I assembled the plane before glueing the battery support plate. By moving it forth and back with the battery strapped to it I figured out where to put it to balance without adding weight. I can focus a bit more on this step in my next build video.

@ioannisbatas1614 2 года назад

Superb !!!

@bavarian_rc 2 года назад

Thanks! Great that you liked it

@rcsrcc3382 2 года назад

Good video!!! A balsa or wood airframe that is carefully built over time will fly well. I hope we don't end up with only styrofoam or EEP airframes.

@bavarian_rc 2 года назад

Thanks a lot! I loved the build process and will do more balsa builds in the future!

@allanmou Год назад

Superb video. 👍

@bavarian_rc Год назад

Thanks a lot 😊

@raulgarciagarcia288 Год назад

El arte de las manualidades. felicitaciones..

@bavarian_rc Год назад

Thanks a lot. Happy to see that you liked it.

@Mehrnikou Год назад

Hello. The King Model Airplane Buider... Bravoooo👏👏👏🌹💐🌹💙💚❤️🏆🏅🥇

@bavarian_rc Год назад

Thanks, that is too kind 😊 I try to learn with every build and share it with the community. Happy that you liked it!

@lextek595 2 года назад

Fantastic craftsmanship. Learned a lot. Beautiful plane.

@bavarian_rc 2 года назад

Thanks a lot! 😃

@Liveisbeautiful2008 2 года назад

Elaborate work of art.

@bavarian_rc 2 года назад

Thanks!

@iwontreplybacklol7481 Год назад

What a flippin' master! Wow.

@bavarian_rc Год назад

Thanks! 😊

@iwontreplybacklol7481 Год назад

@@bavarian_rc you got me wanting to build a plane for the second time (first time was a disaster, never completed). Im wanting to get a Kaos streamer wing. What glue is best, white wood glue or CA? Any one better than the other or just personal preference?

@bavarian_rc Год назад

Go for it! The Kaos looks nice. Concerning glue I think there is a lot linked to preferences. For glueing balsa wood I usually use white wood glue. It gives you more time to perfectly align your parts and it doesn't make the wood hard (like CA), which makes the sanding a lot easier. On the other side CA allows super fast progress. As you have seen in this video I also use CA in some cases and some other builds like the Puri, Shaka or Venice were mainly done with CA. Some combinations work better with CA, for example wood on carbon. Wood with metal (like the brass tubes of the Triple Neo) require epoxy. I hope this helps.

@iwontreplybacklol7481 Год назад

@@bavarian_rc awesome, fantastic advice from an experienced master. I value your comment highly! Thanks! Maybe I'll make my own video of my build and maiden and share it :)

@bavarian_rc Год назад

If you have questions during the build just ask. Would love to see your video 👍🏻🤩

@kev4354 2 года назад

Thats very nice Thank you

@bavarian_rc 2 года назад

Great that you liked it 😃

@rodrigobethonico Год назад

Very nice 👏👏👏

@bavarian_rc Год назад

Thanks a lot!

@stevegascoigne1482 Год назад

Wonderful.

@bavarian_rc Год назад

Thanks a lot!

@Bianchi77 Год назад

Nice info, thanks:)

@bavarian_rc Год назад

Thanks, I am happy that you liked it!

@Toscanto 2 года назад

Très bien vidéo super bel avion

@bavarian_rc 2 года назад

Merci 😃

@powerofone1645 6 месяцев назад

45:30 if only it was this easy.. Nice build.

@bavarian_rc 6 месяцев назад

Yeah, I have been training this snip, snip …. Wing trick for years now 😂 Happy that you liked the video!

@_f_ Год назад

what a build

@bavarian_rc Год назад

Thanks buddy!

@Argosh Год назад

You can actually use oracover as hinge as well. Works like a charm on my F5J Inside.

@bavarian_rc Год назад

Never used Oracover as a hinge but will definitely try. Thanks for the tip 👍

@clockmakerify Год назад

Чудовий літачок, та дуже акуратна робота. Форма крил та хвостового опірення, як у сиаричка Spitfire, класику не обманеш.

@bavarian_rc Год назад

Thanks! The eliptical "Spitfire" wing immediately caught me when I saw this plane. Despite being very light it can also go very fast (~160 km/h) in a dive, but you have to be careful not to overload the structure.

@jimjasper9851 8 месяцев назад

Proper job mate, you have me hooked! Trying to find if this model is available in Oz. Jim

@bavarian_rc 8 месяцев назад

I hope you can find it in Oz. I really love this plane in both configurations with its speed and thermic wings. The flight video with the Thermic wings will come soon. The video shooting is already done. Now comes the lengthy part to edit it. Bye Robert

@greenvlogs1219 Год назад

Wow amazing your video super

@bavarian_rc Год назад

Thanks, great that you liked it!

@gregsutton2400 2 года назад

thanks!

@bavarian_rc 2 года назад

Thanks as well!

@payushka6488 Год назад

Big inspiration.. I have Aeronaut R.E.S. and Speed... both with the wood fuselage and V tail. But the technic of building wings is the same I suppose. Thank you a I wish you nice fly!

@bavarian_rc Год назад

Thanks a lot for your feedback. I think the wings are completely identical between the normal Triple Neo with wood fuselage and the Triple Neo. I will soon start the build of the thermic wings. It‘s really a wonderful plane. Happy flying to you as well!

@payushka6488 Год назад

@@bavarian_rc Hello, only one question. Its neccesary to put glass under the balsa cover of the middwing? In classic Triple Speed is no note about it, or its your idea for more solid wings?

@bavarian_rc Год назад

It is not necessary but I wanted to make the wing a bit stronger in this area. The instructions don‘t require it. Same for the carbon roving at the trailing edge

@giannimoscotto7386 Год назад

Molto bello 🤗

@bavarian_rc Год назад

Thanks a lot!

@valerisamoshkin949 Год назад

Просто и понятно. Браво! Бис!

@bavarian_rc Год назад

Спасибо … Thanks!

@darrylwindle5331 2 года назад

mate if that thing flyies as well as it was built it must be awesome!!!!

@bavarian_rc 2 года назад

Thanks buddy! I can tell you it flies great!

@shauntaylor9251 Год назад

Great to see a build rather than buying a polystyrene clip together

@bavarian_rc Год назад

Yes, balsa is back!!! At least for me. So much more rewarding than this ARF or RTF stuff.

@christopherleveck6835 Год назад

@@bavarian_rc I agree. I've been doing this for over 40 years. The first 30 of which they were all like this.....

@billmorris2613 2 года назад

Good morning to all from SE Louisiana 20 Jun 22.

@bavarian_rc 2 года назад

Hey there! It is a bit later in good old Europe 😜

@albertogreiffo9556 Год назад

From Brasil!

@bavarian_rc Год назад

Greetings to Brasil 😃

@1Mazeppa 2 года назад

Excellent build video, thank you for going to the trouble of publishing it. I have recently purchased a Speed wing kit and the pod and boom fuselage. I'm sure this tutorial will be of much help to me. What is the wall thickness of the CF tube you used for the fuselage? Greetings to all from Harrison, AR, USA.

@bavarian_rc 2 года назад

Thanks for your feedback! The wall thickness is only 0.5 mm but due to the fibre orientation in 2 directions it can handle the loads quite well. Even though I have to say that the tail looks a bit shaky. But the old rule seems to apply: things that bend don‘t break. The shop where I purchased the CF tube is specialized on such gliders and they recommend this tube for tail designs like on the Triple Neo. Had no issues so far during all the flights. Enjoy your build!

@MrSoarman 2 года назад

Nice to see a build rather than all foam plane.

@bavarian_rc 2 года назад

It was my first balsa build since years … basically since I was young. Enjoyed it so much. Will do more balsa in the future!

@MrSoarman 2 года назад

Awesome, my first build was when I was 10 yo, that was 67 years ago, so sad to see all foam in hobby shops now adays.

@bavarian_rc 2 года назад

Yes everyone is looking for ready to fly but forgets that the build can be a very rewarding part of the hobby. My first balsa build was at the age of 14. that was „just“ 37 years ago 😜. Here in Germany I have the feeling that balsa has a bit of a renaissance. But the amount of foam is still huge…

@MrSoarman 2 года назад

@@bavarian_rc I started with control line flying in a circle, I mostly flew combat, where you chop a ribbon off you opponents tail, at the age of 11 I won 2nd place of mostly adult flyers, if that doesn't get one hooked, but thrill and enthusiasm for the next build to improve and better ones self. As time going from control line to radio and soaring nothing Flys better than a well built and human tuned BALSA airplane, they should be called float planes, love your channel, love watching a expert build, and my goodness, must mention the quality of laser cut balsa parts, perfect.

@bavarian_rc 2 года назад

My father often told me about control line flying. He is 82 now and still has some of his old control line planes that he built when he was a boy. He was the one who taught me most of the building skills and thinking back to the time where we both worked together on planes these are truly some of my most precious memories. Today I am trying to give the same to my kids … with limited success as the girls don‘t really care about RC and my boy is interested in too many other things… but he is just 8… time will tell. Thanks a lot for your kind words and following my channel. I am working on a balsa build at the moment (small flying wing). There will be again a build video… so stay connected. Good bless

@MrAaa9271 Год назад

nice

@bavarian_rc Год назад

Thanks. Great that you liked it!

@GregorMima Год назад

You should try carbon fibre at some point instead of fibre glas ... more durable . Excellent video!

@bavarian_rc Год назад

Thanks! Carbon is magic but you always have to make a trade off between price and effect. Maybe on one of my next builds I can try.

@klausochs7006 Год назад

Klasse Bau Video . Da bekommt man direkt lust drauf auch einen zu bauen. Ich finde den Pepper gut .nicht zu klein u groß . Klasse formen ( Design )

@bavarian_rc Год назад

Danke! Der Pepper sieht nicht schlecht aus. Wie Du sagst nicht zu groß und nicht zu klein. Könnte mir auch gefallen… aber halt, ich hab schon so viele Projekte in der Pipeline, da kann ich nicht noch eines starten 🤣

@klausochs7006 Год назад

@@bavarian_rc Hab mich für den Trippel Neo Speed entschieden . A, wegen meiner Gelenke ( Werfen) B , Da weis ich was ich hab . Ich mach hn wie du vom Design her aber dann Rot Weis 😊👍 Hab dich Abonniert 👏😉

@bavarian_rc Год назад

Das ist bestimmt kein Fehler. Macht wirklich Spaß der Triple Neo Speed. Ich hab mir jetzt noch den Bausatz für die Thermik Flächen bestellt. Die werden bei mir dann auch weiß-rot. Tipp noch für den Bau: schau dass die Leitwerke so leicht wie möglich werden. Sonst kommst du vorne nicht ohne Blei aus. Bei meinem Bausatz war das Balsa für die Leitwerke sehr weich und leicht. Damit hab ich den SP gerade so ohne Blei hinbekommen.

@klausochs7006 Год назад

@@bavarian_rc Oha danke . Wenn ich den dann baue und ne frage hab ,wende ich mich an dich.Aber ich denk das ich das geregelt bekomme . Allso wennst den holst Kommt bestimmt ein Bau Video 😁hoffe ich . Wie hast du das mit der Cam gemacht ? Würd mich interessieren .Starke Optik die ich bestimmt mit der Mobius auch hin bekomme 😁👍👏👏👏

@bavarian_rc Год назад

Bei Fragen einfach melden. Von den Thermik Flächen werde ich natürlich wieder ein Bau Video machen. Ist was für die kommende Winter Bausaison. Als Kamera hab ich ne RunCam 2 Split und ne Insta 360 One X drauf geschnallt. Dazu hab ich den Rumpf oben mit GFK abgeformt. Auf die GFK Schale dann eine 3D gedruckte Halterung drauf geklebt. Das ganze mit Klebeband auf dem Rumpf befestigt. Schau mal auf meinen Instagram Account (bavarian.rc) da sind Bilder von der Befestigung.

@anthonylong601 Год назад

Very helpful video thankyou. Is there an optimal ratio of thixotropy powder, microballoons and resin ?

@bavarian_rc Год назад

Thanks! I usually mix thixotrophy powder and microballoons 50:50. If I want the resin to stay where I put it and not run away then I add thixo and micro until the resin has a consistency where the little spike that you create when pulling out your mixing stick from the resin is staying as it is and not flowing back. You can see it at 03:51

@R.B_B 2 года назад

Great tutorial. The kit comes with those 3 wings material and plans? And a see a acetone can for what you use?

@bavarian_rc 2 года назад

The kit comes with one set of wings. You can choose which one. The other wings can be ordered separately. There are no plans, just the build instructions. I used the acetone to wipe off the expoxy that spills out when gluing the magnets

@benammons7687 Год назад

I never thought that custom printed stickers could be so pimp. Kudos. The fact that you're holding a wing just kicks it up an uber notch. 54:14 If that was made from a real pic, what model wing are you holding?

@bavarian_rc Год назад

Thanks, great that you liked it. That sticker was indeed made from a real pic. My YT channel logo shows the real pic. I am holding a Flite Test Spear in my hand.

@user-ni9nu1si3m Год назад

製作很精采。

@bavarian_rc Год назад

谢谢你 (Thank you)

@teslastellar Год назад

That was a great build, thank you. Was that just regular tape you used to attach the flaps, elevators and the rudder? Does it hold? What's the name of the plastic you used to cover the wings?

@bavarian_rc Год назад

Thanks! Yes it was regular Tesa clear tape. It is quite durable and strong. I had no trouble ever. The wings are covered with Oracover (white and black) and Oracover light (transparent blue). You can check the video description for more info.

@petertrigiani3129 Год назад

HI Robert, Very well done time lapse video of the Shaka design!!! I have made a 3-D print-out for the aero-naut servos. I had to remove about 0.5mm on either inner side of the bracket for a near perfect fit. So if tolerance allows, perhaps increase that measure by 0.5mm or 0.6mm on each side??? the holes for attaching the servo to the bracket are near perfect as is. Hence i am questioning if it is worthwhile widening the measurement or just simply filing away the excess material in order to have a perfect fit. If you do make a modification to the STL file i will certainly give it a trial in having a 3-D print made. Peter Have a Merry Christmas and may all the best wishes touch your life and your loved ones!

@bavarian_rc Год назад

Hi Peter, thanks for having a look at my Shaka video! Coming back to the servo frames I have a little issue when making the adjustment you proposed (0.5 increase of the space for the servo body on both sides). When I do this it intersects with the holes for the screws (actually cutting them open). Do you think I could increase the distance between the holes also a bit, like 0.5 on both side? I wonder why they made the holes so close to the servo body. In any case I made a new Version V1.1 (drive.google.com/file/d/1bao89wBdQm8YX4Qxk9BGyOjg_ymPBROb/view?usp=sharing) with a wider space for the servo body (0.5 on both sides). Mounting holes moved outwards by 0.1mm. Small doubler (or patch) put next to the holes which you can file down as needed (a lot easier than filing down the whole surface). I hope this works. Also to you and your loved ones all the the best and a merry Christmas. Robert

@OliveiraX 2 года назад

Outstanding! Great build! Just one question: What model is that Brother printer/cutter? That is marvelous. You feed in special vinyl paper (what kind paper is it?) and it cuts decals ready to apply?

@bavarian_rc 2 года назад

Thanks! It‘s a ScanNCut SDX1000. I use vinyl adhesive decoration foil. Nothing special. It‘s a German brand called d-c-fix from the hardware store.

@OliveiraX 2 года назад

@@bavarian_rc one other thing: what is that eliptical template you used for the wing? Did it come with the kit? Did you make it yourself? What is it made of?

@bavarian_rc 2 года назад

This thing is made of 3mm Depron and was part of the kit. It is used to align the spar and the skins. A quite clever solution that the manufacturer Aeronaut uses in many of their kits.