Troubleshooting Sensor Pairing Issues for TPMS

Подписаться 227

Просмотров 84 тыс.

50% 1

Guide to installing a tire pressure monitoring system (TPMS) including changing pressure and temperature units, swapping sensors between tires, and most importantly performing the sensor pairing.
Note:
You may be able to successfully pair the sensors without taking the batteries out of all the sensors. I believe that you may be able to pair it just by going to the Sensor Pairing menu, pressing the M button twice so that the lower set of numbers blink, and then simply installing the corresponding sensor to the car tire. You can try this first, if it doesn't work you can then try removing the method of removing the batteries from all sensors before pairing one by one.
00:00 Introduction
00:57 Unboxing
02:46 Menu Options
03:48 Setting Pressure Unit
04:43 Setting Temp Unit
05:06 High Pressure Alarm
05:40 Low Pressure Alarm
06:00 High Temp Alarm
06:27 Swapping Tires
07:50 Factory Reset
08:31 Sensor Pairing

Авто/Мото

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 201

@stephenhobbs7892 2 года назад

Instructions with my unit were very poor. Your tutorial is brilliant.

@giovannam925 2 года назад

I know right!

@HighImpactPromo Год назад

FINALLY! Something that utterly clarifies & details all of the inherent mysteries of the External BT TPMS units! It took me far too long to find your video & learn how these sets work. Thank you for sharing!

@roadrangermy4354 Год назад

Glad it helped!

@CptAwilliamse Год назад

You just added more value to this rather cheap gadget. Now we don't have to throw this away if something goes wrong. Thank you very much.

@stackemhigh1 4 месяца назад

AT LAST !!!! Seems like the only person in the whole world that knows exactly what setting 6 means!! Have searched EVERYWHERE to no avail until I found your video..well done sir and a thorough "walk thhrough" of how to pair them..A BIG THUMBS UP to you😊😊😊😊😊

@capicompean 2 года назад

Aside your magnificent explanation, your pronunciation and clear diction makes more valuable your video. Tanks. By the way, I paired the sensors successfully

@giovannam925 2 года назад

I was going to state the same thing! And his voice is pleasant too.

@danielglover33 2 года назад

Best demo of this device I’ve seen. Thank you. Very informative.

@gavenchan 2 года назад

Great demo and explanation. Thank you!

@Sateena911 Год назад

Thanks bro you really save my life i was totally exhausted trying to pair the 4 sensors .. it was giving me low battery symbol but after pairing by your way it finally worked .. thank you very much 🥰

@marcelopacheco4486 2 года назад

Excelente Explanation, with detailed info about the 7 menus

@obicoke1810 6 месяцев назад

Brilliant instructions for pairing your Tyre Pressure Monitoring System. 👏 👍

@giovannam925 2 года назад

Thank you so much for doing this video! I went and checked all my batteries and labels. They were correct. 🙂. The readings for me were off by like 1psi not too bad.

@AriffAffendi Год назад

Thank You .... awesome turorial mate... good job with the crystal clear explanation. been suffering from acute headache for the past 2 hours upon opening the box and now the headache is now gone instantly. keep up the good work. cant thank you enough.. u save me from another white hair 👍👍👍

@hoangduy92 2 года назад

You help me solve my pairing problem. Thank you very much

@hktay7684 2 года назад

Thanks. Very clear instructions.

@johanbenade1948 2 года назад

Nice explanation. Many thanks.

@vijayantgovender2045 2 года назад

Thank you for sharing your wonderful video I am watching from South Africa

@kneebarx Год назад

wow this is amazing ! even the people that sell this and the manufacturers can't explain how to pair The sensors

@daledan 3 месяца назад

This the the tut that i was looking for!!!! The rest of the vidoes on yt were just unnecessary crap!!! Many thanks mate..

@glennganuelas7953 Год назад

thanks for sharing this! i’ve been struggling with the pairing

@robertoplowman8888 Год назад

Thanks so much. Great video and explanation 😊

@lmsystema 5 месяцев назад

THANK YOU DUDE...Your tutorial save my live, it works like a charm, after trow 3 of this ones on the trash, for dont know how to solve this problems! Thank you, thank you alot!!!

@MattCarrasco 2 года назад

Great information, Thank you!

@alltimegoldengreats Год назад

Thank you very much you have saved me a lot of time with this video 👌

@lasurvivor47 2 года назад

Thank you. Good explanation!

@tobatcastro171 3 месяца назад

It wasn't cooperating with me when I got it in from shipment so i did a hard reset from the manual but it only made it worse. It's only picking up the front left and rear right. Hopefully your video saved would save me from running it over. Thanks bro .awesome on point tutorial!

@Kimisawadeen Год назад

Thank you for the wonderful video Sir. 👍

@Greenshrekinthemountains Год назад

Thanks! More useful that the instruction manual 👍

@jadsonxavier1300 Год назад

Thank you, it helped me a lot here in Brazil

@rash383ify 2 года назад

Great.. solved my problem. Thanks a lot

@Dr4ke1 Год назад

Thanks for the clear explanation

@yudikristian2323 Год назад

Very helpfull , explain clearly & the problem solved👍 awesome

@dean9548 Год назад

Thanks for the tutorial 👍🏻

@bigwolfmarketing3304 8 месяцев назад

It worked.. thanks a lot. Mine was blank for weeks now fixed thank brother ❤❤❤❤

@adamumar4090 Год назад

Very informative, thanks 👍

@eddymarin9019 Год назад

Muchas gracias, logré vincular nuevamente los sensores de mi moto. Gracias mil.

@lDARKH3ARTl Месяц назад

Very helpful video

@youtubesub4461 Год назад

I was trying to figure out pairing when I came to this video, it didn't work but then I went to my manual and it said drive to 20km/h and they will all auto pair, indeed they did. Good video explaining rest of the features

@razifraser4245 2 месяца назад

How you did that? Can you explain the steps..

@parthachakraborty5475 Год назад

Thank you. Awesome video.

@willwec 8 месяцев назад

You are amazing man, help me more than instruction menu of the product, I'm your fan

@EvanR7028 10 месяцев назад

Muito obrigado! Apenas o seu vídeo forneceu as informações que eu precisava!!

@rudywawrinka8926 Год назад

Thank u, finally I understand all those buttons r made for. Gbu

@atifmahmood2009 Год назад

too good... really trouble shooter... as I could not get the reading... I paired as per your advise and it suddenly it started showing off the reading.. so thank u so much for saving my money as I was about to throw it out of the window...

@roadrangermy4354 Год назад

Happy that I could help!

@micheltorisaen9605 2 года назад

Thank you for this video

@narfnn2111 11 месяцев назад

Very very nice tanks a lot!!!!!

@scottwoodhouse5515 Год назад

Thank you, that made it much easier 😉

@rolandpeter8067 Год назад

Thanks for sharing sir... finally works..

@lukenapier8406 2 года назад

10 mins of working out why three wouldn’t show anything, didnt even think to check the battery’s 🤣🤣 thanks man. helped heaps

@williamhorton9700 3 месяца назад

Thanks for the video. In my case I have the small cigarette lighter reader plus 4 sensors. One of them needed to be replaced and I had a spare but only showing flashing 00

@Maca115070 Год назад

Well done 👍

@muhammadminichemengg Год назад

Very helpful ❤ i reset my Tpms😊

@khunrot8025 Год назад

Well, noted thank you for this video.

@owaiskhan Год назад

Very Helpfull

@zukh5814 2 года назад

This video is super helpful, tqvm! The manual provided sucks!

@tntxxplosive Год назад

Be blessed man !!!

@slinkydonkey 4 месяца назад

Thanks this is a good video. However I had already installed the adaptors onto the tyre stems. Now they seem to be stuck... Also I can only pair two of the tyres I kind of wish I hadn't bothered if it was going to be this much trouble.

@tonykwon9260 Год назад

Glad I found your video.. detailed explanation 👌

@user-jm1xp6vg3d 11 месяцев назад

this was a great explanation on how to use this. I am wondering if you can answer a question.. my unit instuctions says "pressure copes 14-87 PSI". I am wanting to use this for a small tent trailer single axle. (I don't find the range anywhere, however hoping this is possible..) I am about to purchase new tires but I have read that often max PSI for trailer tires is 85PSI (and I have seen at least one that was 90PSI). Does that mean that this unit will not go higher than 87PSI? Therefore it won't work for higher pressure rated tires? Also, when I try to program the low end of the PSI, the highest PSI I can put in is 35PSI which would seem not to help at all with the higher pressure tires. I don't know much at all about tires, but any help you could offer would be appreciated. Thank you for the excellent tutorial!

@cocolandstudio Год назад

thank you so much

@ezhans 2 года назад

Thanks much!

@hcling2765 Год назад

Hi, first off, thank you for making this instructional video. One of my sensors unfortunately suffered from water corrosion and I subsequently purchased a replacement unit. However , after following the steps you showed to pair the sensor it was to no avail. Suspecting that perhaps the battery was faulty I even switch to one of the existing batteries which are in working order but still was not able to pair it. Is there anything else that I can do ? Instead of scanning for it can we manually set the number ?

@GomesStore 2 года назад

Thanks forma Brazil

@EduardoRamirez-ni8il Год назад

Per the manual you go to menu item 7, then press menu 2 times and drive car to for 5-15 mins. to pair the sensors

@sok9san947 Год назад

Thank you

@kevinudian Год назад

Thanks for the video Bro! Mine only couple months old but since day 1 the FR always shows 6 psi more than the rest i took them off today and factory reset it, not the sensor ID are all showing 00.00 and wont pair. Any idea? Pretty sure it's not the battery as it's fairly new.

@bobabooie6389 Год назад

Thanks 👍

@dimuthjayawickrama Год назад

Your video is so helpful. Thanks alot. Can we calibrate the sensors? One of my seniors read 2 psi higher

@roadrangermy4354 Год назад

No you can't calibrate the sensor unfortunately

@rodrigopineros6016 Год назад

Very nice video, helped me a lot, just one question, does the device charges even when is off?

@roadrangermy4354 Год назад

The in-car reader unit does

@scmmotorhomers2386 Год назад

Hi I never explain myself right can you tell me what is the maximum bar or psi does his equipment go because on my motor own it will not take it up to 80 psi thank you for your time

@Jezza1656 7 месяцев назад

Hi just wondering if there is a signal booster as I have a large caravan that they are fitted to and when monitor is in my jeep I donot get updated information?

@donmonasterial1863 10 месяцев назад

What do you think is the matter when the RR pressure on the reader just isn't showing anymore? This is just after about 2 weeks of normal display. What should I do?

@irfansensoy5901 6 месяцев назад

Hello, the measurements of these devices are generally different. Even if all conditions are equal and tire pressures are the same, it shows different pressure values on the screen. Is there a calibration or +/- correction factor for this?

@narainsamygovender6494 2 года назад

Great Explanation Sir. Love it ! I have aftermarket internal sensors. The lighter plug in monitor beeps continuously and only one wheel reads which is also incorrect . Can this be repaired? Or should I just put in a new external one. Thanking you in advance

@roadrangermy4354 2 года назад

Sounds like you might have 1 bad sensor, personally I would replace it with an external type unit since it's easier to take out and check etc.

@primojun Год назад

hi.. just bought the external sensor... and later on bought the internal sensors only . is it compatible with the unit?..

@danilomolleno8678 3 дня назад

Tried your tutorial but still same problem tpms is not pairing with the sensor. Also tried to check the batteries with voltmeter no problem all all are reading 3 volts. What seems to be the problem. Thanks

@jeremiahheredia3190 2 месяца назад

what is the trouble shooting for 3 sensors showing 0 psi and one showing the actual psi? are the batteries going low?

@ianredondo6524 3 месяца назад

Hi. I lost a sensor, and got a replacement which i bought online. Is there a way to sync/pair the replacement sensor to the host?

@vijaymohan2932 2 года назад

Great video! Does this device switch on automatically while driving or need to switch it on manually everytime?

@roadrangermy4354 2 года назад

I personally turn off my in-car display unit if I park at home or if I park anywhere where there is no sunlight because keeping it on while there's no sunlight drains the battery fast.

@user-yu5sn7re5q 5 месяцев назад

Can we plug all the 4 sensors first on tyres, after that we do pairing one by one?

@shri1081268 6 дней назад

How to change the pressure value shown at the display

@colinomalley5573 Год назад

Love the video, as we have installed this on my caravan the signal is too far from the dash to the sensors do you know if I can get some sort of signal booster.. thanks again for the great video

@roadrangermy4354 Год назад

Aha mate, these cheap ones don't come with a booster or a repeater. You might want to consider getting one from TyrePal (www.tyrepal.co.uk), it's more expensive but they make ones that are specific for for caravans.

@colinomalley5573 Год назад

@@roadrangermy4354 thanks I will try them

@nickaxe771 7 месяцев назад

I have the same sensor but on a motor cycle so only 2 sensors and a small main display....the front sensor will not connect with the main unit.....the battery reads 3v on my battery tester.....any ideas guys.

@rfkees 8 месяцев назад

Hello, thanks for the great video. Is there a way to set the low pressure alarm below 17 psi. I wanted to use this on a vehicle with tire pressures around 12-15 psi so the alarm constantly goes off.

@roadrangermy4354 8 месяцев назад

I'm not sure if this is possible, the lowest number it shows is probably the lowest it goes to

@lmh-mv3ec Год назад

Hi, thanks the video where can i get this?

@djdonpillai Год назад

I’ve follow ur steps and did factory reset but after that not able to pair … it doesn’t pair even after removing and installing the batteries

@dnee Год назад

How to get back to reading sensor from the setting menu?

@andrewtoh2990 Год назад

Thanks for the excellent video..I have the same uniy for 2 years and has been working perfect until recently when the auto sleep function doesn't work. So the unit will run out of battery really fast. Now I have to continuously charge the unit in order to use the unit . Is there a way to enable the auto sleep mode back?

@roadrangermy4354 Год назад

I didn't know that it had an auto-sleep function, mine runs out of battery too so I usually switch it off when I'm parked

@andrewtoh2990 Год назад

@@roadrangermy4354 Im not sure what I did, but the auto sleep function is back. I leave it on the dash for solar charging and it never needs charging by USB anymore.

@MegaMoon888 Год назад

But when I go to menu 6, my device behave little differently. When I press menu it starts blinking the code below with respect to the tire number...and it doesn't stop blinking...I can switch to next tire by right key...it can go to rest of tires...the code.below each tire keep blinking...it doesn't stop...or pair the way you have shown on screen...

@orangeduc3129 Год назад

Available in Ghana?? Please thanks for your kindness

@alexjofra День назад

Front left sensor one not responding

@hamza49483 5 месяцев назад

2 of my sensor showing same identical identifier? What is wrong here. Im talking about the option 6 in the menu . Tire 1 and 3 has the same identical identifier.

@babarkhalid2746 5 месяцев назад

in menu no. 6, My device is showing all zeros at bottom, it doesn't even show pressure, what could be the issue?

@smartunnel 2 месяца назад

I have the same brand but mine cannot be reset. It can't go thru those 7 menus. Is there any other way to reset it?

@user-le5qy7rf3f Год назад

What is the way to add a new sensor in the event that one of the sensors malfunctions, please. We are your followers from Jordan

@GJoseph Год назад

If I need to pairing only one (RR) of the sensors, do I need to remove the battery of the 3 sensors (FL FR RL) that already pairing?

@roadrangermy4354 8 месяцев назад

No you don't actually need to do that.

@kaelangel9520 9 месяцев назад

Hi sir, why my RL the number still not chnage eventhough i alredy fill in with air

@zaiedulhoque9487 Год назад

Thanks a lot for this valuable explanation all over the whole internet I was looking for. Now I would like to add a query which might help others too and it is a bit tricky and exceptional requirements. My scenario is, I've used external TPMS sensors previously and after a year, the main machine was useless so I bought a new TPMS with internal option. Now anyhow one of those four internal sensor got battery discharged which I came to know after disassemble the sensor. Now at this moment I have those old external sensors fine but the old TPMS machine was faulty, in this case "Can I synchronize any of my external tire sensor with the Internal TPMS machine anyhow which can help me to sustain few more days with a complete TPMS setup ?" If so, please guide how. It will be really helpful and thanks in advance.

@roadrangermy4354 Год назад

You might be able to use the internal sensor's reader machine with the external sensors because I think that all these are manufactured by the same company in China, but I can't tell you for sure whether or not it will work. Give it a shot and see if it works.

@zaiedulhoque9487 Год назад

I have tried to do it and it works. Just what I did is, at first reset the device as DEFAULT as your advice but that option I found in menu serial 6.

@CesarGarcia-dv9yd 10 месяцев назад

Good evening, the video is very good. Thank you for giving us your knowledge. a query, perform all the steps but the sensors do not send a signal to the screen, what could it be?

@roadrangermy4354 8 месяцев назад

Have you checked the battery on the sensors? It could be that you have a bad reader unit or the reader unit is not getting enough electrical power. You can try by connecting to USB instead of solar. Remember - these are cheap electronics that aren't really super high quality, so you may just have a bad unit.

@CesarGarcia-dv9yd 8 месяцев назад

@@roadrangermy4354 Good night I changed the batteries and everything is ok, thank you very much for the response, greetings from Peru

@DamianYesiolow 9 месяцев назад

I have the 2wd version for elecric scooter, working ok but shows wrong pressure. When tires are inflated to 4bar it showing max 3.1 for front and 3.5 bar for rear tire. Is this possible to recalibrate? Maybe sensors are broken :/

@roadrangermy4354 8 месяцев назад

These sensors are not accurate, you can use them to tell you if there's a puncture but don't rely on them for accurate pressure measurement.

@jonjonmd Год назад

do you have a tutorial on how to replace the internal battery from the main panel? mine is not charging from solar or usb anymore

@roadrangermy4354 Год назад

Hey jonjonmd, no I don't, I've never opened mine up before. The batteries are not meant to be replaceable inside the receiver unit but I reckon that it most probably uses a cheap 1-cell lithium ion battery in it. You could probably get a similar battery from eBay or Amazon and solder it in yourself but I would advise against it because if you don't get the battery specs exactly right, you could risk an explosion when the solar tries to recharge the batteries.

@malulo Год назад

I inflated my 4 tires to 36 psi. 3 sensors agree but the RF shows only 31. I haven't paired the sensors but if I install the RF sensor in another wheel it keeps showing 31 psi whilst the original sensor showed 36 psi, therefore I concluded that the sensor is defective because being the accuracy 0.1 bar= 1.5 psi it is way out of range. Now if I buy a replacement sensor from another supplier which shows an almost identical monitor, would it work with my kit?

@roadrangermy4354 Год назад

Your mileage may vary with this - these aren't super stringently manufactured devices and many of them are just different factories copying from one another. It might work or it might not work - it's really not possible to say.