2014 TRX450ER Dyno pull. Mods: RE CNC Ported Head Stave 2 Hot Cam Stock Size Ferrea Valves Kibble White Valve Springs CP 12:5.1 Piston (Stander 96mm) Monster Shorty Exhaust Carb was bored to 42.5mm RE Air Filter
Whats the target a/f ratio you runnin ? Got basically the same set up on my 08 450R ... curently in the carb tuning procces using a wide band o2 .. just curious about the a/f your set up like !
I personally would suggest is to be about 12:5 from idle to mid theottle and 11:8 at WOT. You can go 12:5 all the way from idle to WOT if you want it won't hurt anything but I have seen a little more power gained at 11:8 at wide opened like I said. Hope that helps!
Would it be safe to say with full dasa exhaust, stage 2 hotcam, and large uni filter with no airbox lid I would be right around 45hp? Just did a fresh rebuild
@@trxtech3010 its fouling plugs.. benn messing with jetting and fuel mixture screw, but think valve seals are bad.. runs fine just after it sits plug is carb up.. bike sat for 10 years before we bought from neighbors
