Trying to reach 50 MPH with the 98cc Rascal mini bike

Подписаться 71 тыс.

Просмотров 24 тыс.

50% 1

Trying to reach 50 MPH with the 98cc Rascal mini bike.
Installed valve shims a header pipe and a 19MM slide carburetor on the 98CC Coleman Powered Rascal minibike to see If the bike would reach 50 MPH.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: ru-vid.comfea...
Instagram - Doubledown555Black66
_____________________________________________________________________
Parts used -
Intake manifold - affordablegokarts.com/collect...
19MM carburetor - affordablegokarts.com/collect...
Valve spring shims - www.ebay.com/itm/324725679977
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

19 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@thereal_bigchop Год назад

Hell yeah bro, this is probably one of the videos I enjoyed the most out of the many🤙🏻 that lil motor is putting in some work I might have too get me one😂

@RoadKing65 Год назад

Holy cow ....quiet desert living until one badass mini bike tearing up the road.

@ianfairbanks1318 Год назад

It would be really neat to see the fuel usage difference between the 98cc doing 50mph and a 212cc doing the same speed on the same bike. Just pour a metered amount of fuel into the tank, top out for a solid minute (if you can), shut down, empty gas tank, and measure the amount of fuel left.

@brodrea7664 Год назад

Dude I’ve been watching you forever. I love your stuff

@big420ccboiz9 Год назад

I went from 50 to a 60 tooth sprocket and gain 3 mph I got that from you the 60 tooth sprocket episode thanks man

@NVScrapper Год назад

Great video, I like that little bike. I can’t wait to see what other engines you put on it or maybe even make it into an e-bike! 😂❤

@heathenprojects2639 Год назад

I hit 34 on a stage one kit with this little motor on my 71 skat cat and honestly I'm good with that

@cycleduder7986 18 дней назад

I hit 50 tonight trust me it’s not that different from 38 but it had more to go 😅 I gotta keep testing just curious what some springs and billet rod would do

@crippleguy415 Год назад

AWESOME 😃. You rock 👍🏻

@mikesbarn1858 Год назад

I did custom head and cam with exhaust and intake. Put mine on the Phatmoto. Moves nicely now.

@johnnyphillips9735 Год назад

That engine will haul a66 now its got some serious potential

@rexmontana3058 Год назад

Nice build, do you have any experience with the Lifan 118 cc engine? Got one for my son’s doodle bug build and it’s a nice balance between the predator 212 and the 98cc that came on the doodle bug. I guess it’s a GX120 clone but I haven’t been able to find out much about it as far as what parts will fit on it for mods…..love the channel!

@duckygang603 Год назад

Would a 22mm mikuni carb work? What performace carb would work best? thanks

@curby01 7 месяцев назад

Do you need the 19 mm intake manifold to attach the carb or can it be attached without it?

@nickbestn4230 6 месяцев назад

How long do you cut your throttle cable to for the nipple end on the carb slide?

@hellheart1993 Год назад

I had no idea that 3.0s can get down like this let's go

@HoeLeeFuQQ 2 месяца назад

Will this fit a Coleman ct100u with a stock motor?

@timerickson7056 Год назад

Once I got the string tangled and thought I was going to have to pull the head .

@ayvionrainey6900 24 дня назад

I been wanting to get into this or go karts but,idk where to start or i do have much money can u make a vid about it.

@rustynutz8704 Год назад

I just want to say that the kei hin carbs off the honda atc200 are excellent on these engines. No one seems to use them unlike the mikuni.

@Black66 Год назад

I use the kei hin carbs on a few of the engines on the channel. Check out the playlist. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9KE9e-3KHrU.html

@darintraver4983 6 месяцев назад

Can I put those valve shims on a stock Coleman 200 cc ?

@Exotic_981 Год назад

Love this❤

@cycleduder7986 18 дней назад

I got 50 black66 it had more left too not enough road for the BEAST

@Zared_Airsofter1 29 дней назад

Was it going 42 stock

@Austin_Dixon Год назад

So I was wondering what size sprocket I should get for my ct100u with a predator 212. It has a stage 1 kit and a 12t clutch with a 60t rear sprocket paired with a 420 chain. I wanna go smaller on my sprocket all though the torque is amazing I think I would benefit from more top end.

@Black66 Год назад

Have you seen this video with the CC100X and stock gearing with a Predator 212 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tj8XxfvMbRE.html

@koopsta69 Год назад

needs that billet flywheel and some timing n porting - where are you going to get the medal aftermarket cam ?

@Black66 Год назад

Affordable go karts for the performance cam.

@wickedeagans Год назад

you should show valve shims on a predator 212. thanks for showing like this tho.

@Black66 Год назад

There are some videos using valve shims on the 212 down in the playlist. Thanks for watching!

@miguelpagansr6128 Год назад

Another great video, I have a header pipe for my mega moto 212 pro. I’d like to use it on my stock Honda gx160 engine, you think I should use it or will it hurt a stock application? I’m so tempted to using it.

@user-ru7he6qj2w Год назад

It won’t make it run worse, put it on

@glenalexander4661 2 месяца назад

Where can I find the valve spring shims or washers? What size fits in the area below springs?

@Black66 Месяц назад

Links in the description of the video. Thanks!

@dallasjohnson1552 Год назад

You should build a 225 tillitson on m5 methanol

@paulfuller2167 Год назад

So helpful! So have you found a steel cam so you can beef up the springs? Also, where can I find those shims? I am going to do this same set up on my 98cc Rascal project...

@Black66 Год назад

Thanks! Video on the after-market cam and springs out today at 4:00 p.m

@paulfuller2167 Год назад

@@Black66 SWEET!!!

@greenkeeper448 Год назад

Are heavier springs available or are shimmed stock springs fine as they are?

@Black66 Год назад

Heavier springs are available. New video coming out in a week or so.

@nico2635 Год назад

hey man i was wondering if i can get a link to the flat air filter please

@Black66 Год назад

Here is the link www.amazon.com/dp/B096B1L6TZ/?coliid=I1VDYCMH1QZJ29&colid=A752D7JJVC0B&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

@Itshajjj Год назад

Will adding just exhaust and slide carb to my completely stock engine blow my engine or is it safe to run this carb without any inner mods

@duckygang603 Год назад

Your fine as long as you dont keep your motor pinned for long. Running a performance carb is also fine on a stock block.

@we3cho349 11 месяцев назад

Where can I get a flat air filter like that one ?

@Black66 11 месяцев назад

You can pick them up on Amazon . Links are in the description of the videos.

@Chef_Fiend138 Год назад

Can you add a link to that slide carb please? Im building on the same 98 from gopowersports and the bolt holes are 36.5mm apart, not the regular 48 and im having the hardest time find one!!! Also, the manifold if you could please.

@wrenchitrico4762 Год назад

PLEASE HELP US IM HAVING THE SAME ISSUES!!!!!!! @black66

@timmason2556 11 месяцев назад

Got mine of Amazon and it fit just fine

@koopsta69 Год назад

18lb honda springs work

@jonathanruiz6039 10 месяцев назад

Where can I get a shorter air filter

@Black66 10 месяцев назад

I picket this one up on amazon. Check the description of the videos. I usually put the links for the parts used in the description.

@ridingtom9891 Месяц назад

I’m copying your build. Can you please tell me what valve shims you used and where you purchased them. What thickness. Thanks. Awesome little bike

@Black66 Месяц назад

Links in the description for the shims. I used the .072 shims. Be sure to check out the other rascal lite videos on the channel. I added some billet parts and a cam to the engine.

@Google_chan1 Год назад

what do you use to track your 0-30?

@Black66 Год назад

A Dragy performance meter

@fafanair7737 Год назад

Hey black66, where can I get the 19mm slide carburetor for the mini bike?

@Black66 Год назад

Here is the link www.gopowersports.com/carburetor-pz19/

@fafanair7737 Год назад

@@Black66 Thank you so much black, so when i connect it to the mini bike i have to connect the fuel as well?

@wrenchitrico4762 Год назад

@@Black66we need the manifold!!

@tylerslate269 6 месяцев назад

Where did you get the shims from

@Black66 Месяц назад

Links are in the description of the videos.

@robertbailey2342 4 месяца назад

You prefer tourqe converter or straight chain?

@Black66 Месяц назад

Torque converter on the bigger bikes like the CT200U-EX and straight chain on the smaller bikes .

@geefim2144 Год назад

Do you have the link for this header pipe ?

@Black66 Год назад

Yes, there are links to a couple different pipes in the description of the 98cc performance cam video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TASIlWl5K8k.html

@geefim2144 Год назад

@@Black66 thanks ! Nice list.

@Wee714 Год назад

What state you live in ????

@Black66 Год назад

@Wee714 Год назад

Dam if you ever come to cali you can come ride my 2002 harley davidson softail electric ⚡️ i built and do a review on your youtube that would be dope ive built a few bikes on my channel and i love your builds bro and quality of content is good also something im lacking on lol

@Black66 Год назад

@@Wee714 I saw that bike on your channel! It looks sweet!! If I get down there Ill have to check it out for sure.

@bradenyoung5501 Год назад

Hey black66 I have a pocket bike that uses a #25 chain but the problem is it keeps on bending,is there a special chain to use?

@WooCrisp Год назад

I think we are on the 6th pin??

@tylershg Год назад

rip

@koopsta69 Год назад

please say were you will be getting the cam

@Black66 Год назад

Affordable go karts.

@koopsta69 Год назад

@@Black66 120$ ouch

@Black66 Год назад

@@koopsta69 Actually more than that because you have to have a core out of a Predator. You cant use the nylon core out of the 98cc. Unless of coarse you already have a 79cc cam lying around to trade in for the core.

@koopsta69 Год назад

@@Black66 i figuered that .. a bit rich even after buying the 165$ flywheel lol the whole engine i got was 85 buks lol

@Black66 Год назад

@@koopsta69 $5 engines are the best kind! Just as much fun as the expensive stuff IMO

@big420ccboiz9 Год назад

What's your gearing

@Black66 Год назад

Its a 12/75