When you add a Billet flywheel and cam to the 98CC

Подписаться 85 тыс.

Просмотров 14 тыс.

50% 1

When you add a Billet flywheel and cam to the 98CC
Installed a Performance cam, 22 lb springs, and ARC billet flywheel in the Coleman 98cc 3hp powered Rascal lite minibike. Tested the bike from 0 to 30 and top speed to see if the parts added any performance.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
___________________________________________________________________
Parts used -
Billet flywheel - affordablegoka...
Adjustable billet flywheel - affordablegoka...
19MM carburetor - affordablegoka...
intake manifold - affordablegoka...
Air filter - affordablegoka...
Performance cam - affordablegoka...
Long header pipe - www.ebay.com/i...
Short pipe - www.ebay.com/i...
Azusa clamps - www.amazon.com...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@thereal_bigchop Год назад

This is the video I was waiting for🦾 Seeing that little thing do 50mph just shows me the real potential of 212’s & bigger motors🤙🏻❕

@AnGryCruizer Год назад

Man I been waiting for this one since JumpStreet💯💪🏼

@crybabylocr4012 Год назад

Love it man coolest bike I ever seen get built 💪

@NVScrapper Год назад

Another great video! I like the see through cover. :) 😎💯💯

@cohocarl Год назад

Another excellent video. Thx.

@julianbloedow9164 Год назад

How did you not throw the rod

@lancedmemes2255 Год назад

Ive always wanted to see these engines with a torque convertor on them, you should test that out!!

@nuada1067 Год назад

They run pretty good if you swap the stock red spring with a green spring in the torque converter

@MaldonadoMoto Год назад

that is one speedy one cyl! ♥

@mr03mach12 Год назад

Oh yeah great video 👍🏻

@duckygang603 Год назад

Is this all ok with the stock rod?

@mikesbarn1858 Год назад

You might consider the head work also. I did that for mine and it’s a rocket now. I really need to get the billet flywheel.

@Black66 Год назад

Did some headwork Video coming soon!

@predator_boiz336 Год назад

Hope you do a decent little bit of detailing when you do a port video! I have never done any porting but wanna try it on one of my 212’s but kinda scared to start just shaving metal off lol

@darrellnichter9894 Год назад

I had a bt200x with a 5/8 shaft thought that was weird. Bike FN scoots

@dabtech7456 Год назад

Some of the old Coleman's are like that . They have a 196cc motor on it

@SDS-1 Год назад

Love it 🎉🎉🎉🎉🎉🎉🎉

@MountainEagle77 4 дня назад

I have been trying to find a billet flywheel for a 98cc engine for a while now. Can’t seem to. The link in the description for the flywheel is no good :-(. I have this exact same engine from GoPowerSports - 98cc.

@Black66 3 дня назад

There are a couple of billet flywheel link options in the description of the video.

@somlysom6315 Год назад

If play around with the back sprocket or put a torque converter on it maybe you'll get more power.

@chrisolvera7904 Год назад

Black66, Please get an RCF Micro Mini. I want to see your take on a micro mini build

@Black66 Год назад

I would like to build one .

@forfashire 5 месяцев назад

@black66 would it be possible to run a build like this with the stock exhaust to keep it quiet? or will that have too much back pressure?

@Black66 3 месяца назад

Yeah sure you could use it but it might slow it down a bit.

@nickbestn4230 Год назад

Oh and where do you get the billet flywheel? i have a ct100u governor bypassed with header and performance air filter and i don’t want my stock flywheel to go kaboom

@Black66 Год назад

Links for the parts used are in the description of the videos.

@houseoffire72 Год назад

I bet an aggressive port job, bigger valves, header & gearing would really open up this motor.

@nowater4you943 Год назад

Yeah but that would be pointless at this point

@roberthavlichek 8 месяцев назад

Hey i have a question about the 98cc im trying to get a performance cam for it but i gotta send the core but the stock cam is plastic. They don't want the plastic cam.. the core is the cam right?. I need help bro.. thanks im robert btw.. i love the videos ther badass..

@nickbestn4230 7 месяцев назад

Hey i’m here to help! I’ve never done it before but i’m pretty sure you have to get a stock cam from a 79cc predator (it’s all metal) and then send it to affordable go karts and they will send it back all ground down

@JVScustoms Год назад

Hey brother, big fan here!!! You think opening up the exhaust and intake runners as well as polishing the exhaust port would do anything on one of these lil 3hp? I was also considering shaving the head down a lil since the piston is so far down in the hole. My buddy and I have a lil contest on who can make there 3 horse the fastest with stock internals lol

@toolman9081 4 месяца назад

You dont need to run a key on the flywheel. You can just line up your timing and torque it down the wherever you want it.

@Black66 4 месяца назад

Yes that is true but the key gives your a reference point to know how much you are advancing the timing. Check out the playlist I have quite a few timing videos

@toolman9081 4 месяца назад

@@Black66 will do. Thanks! Just found your channel yesterday and love what you're doing

@Black66 4 месяца назад

@@toolman9081 Thanks for watching the videos!

@Tokin_Alien Год назад

Man I used to have a lil Coleman ct200u or one of those models I wanted to mod it out but I got rid of it for a bigger grom type bike 😂 😢

@j.finesseflights1403 Год назад

Cool video, working on these smaller engines and all but not worth the money! I assume you are getting these parts for free or heavily discounted! No matter gr8 vid!!

@Black66 Год назад

I say anything is worth the money if you have fun with it or you enjoy doing it. Can't take it with you.

@IBEW44 Год назад

Is it better to have mini bike with coil springs.

@kb3188y Месяц назад

Whats the maximum rpm have you driven the 98cc?whats the safest max rpm you think the connecting rod can take regularly?

@Black66 26 дней назад

Not really sure. I have reved it as fast as it would turn with the aftermarket cam and 22lb springs with no issues so far.

@thomasjames7353 Год назад

I got an rt200 with a 10 tooth in the front a 50 tooth in the back and I want more torque if I go up to more teeth in the front would that be better for what I'm looking for

@Quinn-fp3zc 27 дней назад

If I threw a fly wheel and aftermarket air filter and cam would it blow the stock moter in a Coleman cc100x

@Black66 27 дней назад

Anything is possible. This stuff has no guarantees but mine has lived with no issues so far.

@Quinn-fp3zc 27 дней назад

K thanks

@Quinn-fp3zc 27 дней назад

Would I need the valve springs or could I get by with stock springs and a cam

@rodricbeauregard1053 Год назад

Isit too be inline with the back sprocket? Anyone can ansewer, it takes a village😊

@AnGryCruizer Год назад

Geeeesh u think the extension gonna reach boss 😂😢

@Nanook236 Год назад

I am doing the same job on my rascal lite can you telll me what the torque was on the flywheel? 25lbs? Or if anyone knows

@nickbestn4230 Год назад

You should get a bigger tooth clutch to help out with the top speed

@Black66 Год назад

Check out the playlist on gearing. The 3hp doesn't really have the torque to pull much gear. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xV8i59aGUao.html

@albertmichall5732 Год назад

wow

@samuelkleiber1299 Год назад

Would you be able to put a link to the short header exhaust?

@OpAfAnx Год назад

What where did you get these parts for it I've got one of these 3hp laying around.

@paulfuller2167 Год назад

So just to clarify, you can use a stock 79cc Predator cam on a 98cc engine from gomotorsports? (Trying to just eliminate the plastic cam and use heavier springs to eliminate possible float due to intake and exhaust mods.) (No flywheel or cam grind mod)

@frigglebiscuit7484 Год назад

i would assume. i think he just sent it out to get reground into a bigger lobe and duration.

@ReelSituations 6 месяцев назад

@Black66 Please help me out. I'm currently making my mini bike street legal and also modifying for performance. I'm having problems with charging coils to recharge the battery. How or where can I get a flywheel that can handle higher rpms in a de-governed 196 engine with 26lb valve springs, and billet rod? Or are there coils that I can upgrade to that will charge in a billet or upgraded flywheel? I would be extremely grateful for your feedback

@charityc1322 3 месяца назад

Go power sports has it all

@wesleyd.A10 6 месяцев назад

@Black66 Is there a billet con rod for the 98cc? I was just wondering?...

@Black66 6 месяцев назад

Not that I know of but the stock rod is very strong in the 98.

@wesleyd.A10 6 месяцев назад

@@Black66 Thank you for your reply. I appreciate it! 👍🏼🙂

@OpAfAnx Год назад

Oh nevermind you say it in the vid

@332ARA Год назад

so that is a reground hf 79cc cam?

@jacksonnunery1446 9 месяцев назад

How fast does it go with the 98 cc engine totally stock?

@channel444. Год назад

I have one of those valve covers and rode with it and it leaked a lot, dose yours do that?

@RowansTalkShow 3 месяца назад

Your cam link isn’t working! Where can i get the cam?

@Black66 3 месяца назад

The link still goes to Affordable go karts. I don't see the cam in his parts list any more on the web site. You might contact him to see if he still grinds them.

@RowansTalkShow 3 месяца назад

@@Black66 how?

@Delo_drives Год назад

What does the sting do?

@raw_og5771 3 месяца назад

Where can I find a billet flywheel for a 98cc ?

@Black66 3 месяца назад

Check out the 98cc billet flywheel video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TASIlWl5K8k.html

@kb3188y 2 месяца назад

How hard have you driven the 98cc.do you think the connecting rod will survive high rpm for long durations?@Black66

@samuelkleiber1299 Год назад

How would I be able to aquire the same cam as you, if not similar?

@samuelkleiber1299 Год назад

I know you mentioned it but I'm not understanding it quite as well as I intended

@Black66 Год назад

The link for the cam is in the description of the video..

@samuelkleiber1299 Год назад

@@Black66 so there's not any extra steps like purchasing one and sending it on to be modified, I can just purchase that one

@isaiah6541 26 дней назад

What are the valve springs out of?

@Black66 26 дней назад

22lb springs.

@isaiah6541 14 дней назад

Wander if the 79cc predator flywheel will work on the 98cc? If so would the billet one work. @@Black66

@georgecypher4568 6 месяцев назад

You put that pretty flywheel on it and you only went slower...... the whole idea when you do upgrades is to make it faster ...NOT SLOWER ! Here ya go ...wind up the rubber band a lil bit more and it should go a lil bit faster .....lol