TUNING in 2021 “Resurrection of The CHIP” IS it Still Effective?

Подписаться 37 тыс.

Просмотров 12 тыс.

50% 1

#tuning #foxbody #A9L
This is the software i used to be successful in my foxbody mustang for many years. Yes its like 20 years old but it does work. Tuning on a Factory A9L with Quarterhorse still provides plenty of support!
SMASH LIKE, SUBSCRIBE AND BELL FOR NOTIFICATIONS OF NEW VIDEOS!
SUPPORT THE CHANNEL! teespring.com/stores/neomustangs
JOIN NEOMUSTANGS MEMBERSHIP CLUB!
/ @neomustangs
INSTAGRAM: neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs.restoration
EMAIL: MYBUSINESS01@HOTMAIL.COM.
#neomustangs #turbo #supercharger #binaryeditor #moates #quarterhorse
PLAYLISTS:
TECH CORNER PLAYLIST: ru-vid.com?list...
PROJECT HOTWHEELS: ru-vid.com?list...
BLACK CAR: ru-vid.com?list...
GRUDGE NIGHT RACING: ru-vid.com?list...
DADS CAR: ru-vid.com?list...

Авто/Мото

Опубликовано:

7 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@uknwn3v Год назад

Just picked up a foxbody about 2 months ago so this helps on what I got to look forward to whenever I get some go fast mods

@RPJs-Cuisine 2 года назад

Bad ass video broski!!!! Love it!

@mudfarmer Год назад

I been using the quarterhorse for 12 years. I love it

@sallydafoxfitness 2 года назад

Always so informative Dan… great video as always

@Neomustangs 2 года назад

Ty sally!

@alexgarza2759 2 года назад

Great video boss. Wish I could get to you guys up there

@tracytalbott9259 Год назад

I bought a sct chip about 14 years ago. Same thing as a quarter horse, even uses the same type data link as the quarter horse but you can tune through the data link instead of removing the ecu and chip. They call it a switch chip. It has four tunes you can switch on the fly. I have a daily driver good fuel mileage tune a track tune with harder shifts on my 4r70w and a 105 oct. Tune. 5.0 ,35-250-4 comp cams, ported 3 bar 1.60, 1.94 headers trick flow track heat, only thing stock is the block, 36lbs injector, 1 /58 headers 5.0 f150. It can be returned over and over.

@Neomustangs Год назад

You have an SCT ELiminator chip with a switch thats correct. You can not tune to that chip directly you need quarterhorse and binary editor.

@tracytalbott9259 Год назад

@@Neomustangs yes that is correct, miss spoke trying to fit alot of info with less carrectors, words. Just remember the catch code on the eec 4 ecu. Love the chip of course quarter horse is the first but I'm in Shreveport and Dallas mustang has sct and they tuned it, like I said I love it works perfectly with a turner who knows this style chip.

@jacobhammond4238 Год назад

Wow this was very helpful! Thank you sir

@Neomustangs Год назад

@FoxcastMedia 2 года назад

Very good info, thanks for making this video

@Neomustangs 2 года назад

Ty !

@frankenstanggarage7911 2 года назад

Hey great video! I never really understood what all went into binary editor. Thanks for the content!

@Neomustangs 2 года назад

Thx fir watching man !

@wadestewart901 2 года назад

Glad you made this! I've been wanting somthing for mine and considered the TermyX. But after watching yours and Brew2ls video on it woth Leech MS. Im having second thoughts. I have HCI with 24lb injectors and a c&L calibrated mass air. I really just want air fuel and drivability. Wide open it screams the way it is.

@Neomustangs 2 года назад

Ya you just need a simple chip. Terminator X isn’t a bad idea still for future mods

@jas3118325 2 года назад

Foxbody Grand master!

@texasinnovativeperformance6439 2 года назад

So been trying to buy a fox for a while and your channel has been my guide. No luck buying a fox but bought a 91 Ford ranger and had efi source make me a a standalone harness for the microsquirt. Can't wait to try your tips to see how far I can go

@Neomustangs 2 года назад

Nice !

@GearHead704 2 года назад

The intro music for this one 🤣 Chips and A9L work for sure

@hotrodray6802 Год назад

🔔😎 Thank you.

@lamarrichardson1782 2 года назад

Hell Yeah man!!!! 👍

@Neomustangs 2 года назад

Yes sirrrrr

@b.c4066 2 года назад

Lidio at alternative auto was the man back in the day tuning the stock ecu's

@Neomustangs 2 года назад

Still is i think ? THeres a lot of really good tuners.

@brunoaraujo7750 Год назад

Man!!! This is a great explanation of old school tuning that has been proven!!! I have a question about the SCT flip chips - are they still good, is there a way to tune them at home, or are there shops that actually still tune them?

@Neomustangs Год назад

It depends on the shop tbh.

@SN95Power 2 года назад

Binary editor is user friendly. I've been using tuner pro rt lately. Nobody around here can tune cbaza for SN95 Mustangs so my car has been remote tuned for 4yrs. Great information!

@damonrice8469 11 месяцев назад

Hey Walt, you left Motor city foxfest early. Dan was in a booth with Andrew Hanlon, and Pauldafox and Sally dafox. Good people.❤

@SN95Power 11 месяцев назад

@@damonrice8469 he's the reason why I went with a on3 turbo kit

@out_foxed_gt 2 года назад

I’m waiting for my quarter horse chip and leech is going to help me finish the tune can’t wait 👊🏻 I will give you an update!!

@Neomustangs 2 года назад

Nice !

@en4orser 11 месяцев назад

Holding my breath, turning blue in the face waiting for that update

@edwardmtl 2 года назад

I was about to buy a full pro-m efi system, but I think ill go this route when I do something to my motor or swap it

@Neomustangs 2 года назад

Sounds good !

@matthopkins1107 9 месяцев назад

Man anyone around here in Michigan that’s reputable is like 4-5 months out lol

@Neomustangs 9 месяцев назад

Bring it to NE Ohio

@dustybyram8849 Год назад

Had to go term x A9L had bad capacitors! Guy messed it up

@thatguy83ful 2 года назад

A9l for the win

@Neomustangs 2 года назад

Yep

@thatguy83ful 2 года назад

@@Neomustangs do you have a email address i can ask you a couple questions about the initial setting up of the moates quarter horse.

@ryanbrown.realtor 2 года назад

I've been running the Quarterhorse successfully for 10 years on my turbo car too.

@Neomustangs 2 года назад

@@ryanbrown.realtor boom. I still haven’t opened my TX. I was thinking about maybe putting it on pops car. Just to learn it

@vortecturbo 5 месяцев назад

Hey brother where did you get that case from that your storing your qh and jaybird in..

@sideshow45 2 года назад

I've got 10 second hondas running 28 pin sst chips. Maybe the 440 is just where we know how to get down with what we got.

@sideshow45 2 года назад

You are making me want to get a fox body even more now.... can you use a Moates ostrich with an a9l?

@thefoxchamber 2 года назад

I probably need to get that myself and get rid of this microsquirt.

@raulh802 9 месяцев назад

Is one ECU better than another for HP? For instance, I have a micro squirt but uses batch firing. Idling would be better with sequential.

@adamcartwright6220 2 года назад

I’m getting ready to put a turbo on my stock bottom end and I don’t know anything about tuning. How should I go about getting a tune for my 92 GT stock bottom end with an ON3 kit?

@93_LXcpe 2 года назад

That's where my computer has spent most of its life 🤣

@Neomustangs 2 года назад

Lol

@Foxbodyguy91 3 месяца назад

Good choice of background music. I have the Anderson pms system. I cant figure it out to save my life

@seanraymotorsports2960 2 года назад

Yeah I’m thinking my bama 4 bank eliminator isn’t helping my fox think it’s running lean. Not sure that’s the chips fault still has factory injectors and fuel pressure regulator/ fuel pump.. I’m going to replace my injectors with new 19lbs and Abbi regulator and 255lph hoping that makes it come alive on the big end..I had the same mph after I installed my mods when I recently raced seemed like it was dieing on the big end.. fingers crossed.. and I have a nos question if I run a dry kit and I turn the fuel pressure up with that help or hurt? I would think it would help but I don’t know.. my overall goal is to be in the 12’s right behind the coyotes or ahead lol.

@socios2011 2 года назад

Running old speedbrain ecu and windows mellinium software here anyone else have one..lol

@therealfoxbodyaddicts 2 года назад

When can I bring my fox to you? We all know my car needs some tuning love lol you're a lot closer than Leech

@Neomustangs 2 года назад

Whenever.

@movingpartsgarage5084 Год назад

Would you happen to know any reputable tuners that tune quarter horse with binary located in Ct?

@travisevans7502 2 года назад

I took my 90 lx to get tuned it had a moates chip in it I don't think it was quarter horse they said they didn't have the software to tune with that chip so they installed a sct 4 bank chip and tuned it with that how would that be done

@jaredwhite2140 2 года назад

Any Foxbody tuners In the Houston and surrounding areas?

@austinzielke2347 2 года назад

So I ended up buying a terminator x. Cause there isn't any Reputable shops near me. But you just got me to save my factory wiring harness and ecu for a possible build down the road. Wish I would have known about this going in. Does your tuner tune terminatorx systems? And where are they located?

@Neomustangs 2 года назад

Yes

@knoxaa1 Год назад

Thanks for all the content you put out . Love watching everything. Not sure where in ohio you live. I am from toledo area. I am looking for a good tuner. Dropping in a 347 stroker as we speak. Any help would be appreciated. Thanks

@Neomustangs Год назад

bring it to my shop here in ashtabula. We tune.

@knoxaa1 Год назад

@@Neomustangs ok will do. I will call the shop this coming week and set something up. Thanks

@twinturbotony93 2 года назад

If I ever get the money to build my fox up I might have to bring it up to you for a tune. If you know if a tuner near the dayton area, that would help too. The a3m is pretty much the same thing as the a9L isn't it?

@Neomustangs 2 года назад

Yes and Dayton is only 5 hours. There is a few tuners in Ohio closer to you. I’d just bring it here ..

@hopeandrelax Год назад

Quarter hose website is now closed 11/27/2022

@Neomustangs Год назад

Ya we are aware

@Scrapla1 11 месяцев назад

Whats the best way to clean off a stock J port before installing a chip and do you need to clean the bottom as well? My stock A9L still has the coating on the port.

@Neomustangs 11 месяцев назад

Just clean the coating off. Skotch brite

@BrianSilva-mi8cb Год назад

Any chip you recommend that easy is to deal with now at the moment I can get my hands on ? 1992 foxbody in LA

@Neomustangs Год назад

Theres only one i use. SCT

@Bob-Pye 2 года назад

Watched your live stream very informal best fox channel for the budget fox builder. Question for you, my new combo is stock bottom end stock cam, gt 40 3bar heads longtubes to 3.5 dumps, explorer upper and lower 70 mm tb pro m 75 mm mass air and motorcraft 19 lbs injectors. What do roughly think this combo will run for hp and quarter mile car is wieght reduced 4.30 gear 275 60 15 mt et streets thanks for your input always valued 💪

@Neomustangs 2 года назад

That’s a tough one. Tires are always the determining factor. Slicks probably mid 12s. Probably makes 280 wheel

@Bob-Pye 2 года назад

Thanks for the reply, Iam from Canada, I don't trust anyone around that actually know what there doing can you do custum tunes and mail the chip would that be something you can do?

@Go4BrokeOffroad 2 года назад

Hella funny. I still use a twEECer on my crown Vic and 5.0 explorer. Microsquirt is a much better set-up for na and someone who doesn't need traction control.

@Neomustangs 2 года назад

Nice Tweecer havent heard anyone say that in awhile.

@Go4BrokeOffroad 2 года назад

@@Neomustangs I know, everyone looks at me weird. It was the only thing I knew how to use until about a year ago.

@coreyowens346 5 месяцев назад

So can i use my ecu in my car? Are something just plug in and go something with a good tune! Cause we dont have any one that can tune. I wanna do some heads and cam and intake on my foxbody!

@Neomustangs 5 месяцев назад

Yes

@erickubish9842 Год назад

I am in Willoughby Hills, and my fox needs tuning/diagnosis. It has a 342 long block stroker motor with a built T5. I run at Kuhnle Racetrack and barely get in the 12’s. I know my car is faster, don’t think its getting enough fuel. Help!

@Neomustangs Год назад

Email me. We can set something up

@sethbeck9815 11 месяцев назад

Hey i know this is a old video but do you know if this applies to the 94-95 stangs? i have a 94 gt and i want to get into tuning it but im not really sure where to start, thanks

@Neomustangs 11 месяцев назад

Yes.

@Wonderboy205 Год назад

How does that chip interface with the cars ECU??? Like you just throw it in that cutout hole? Does it actually connect to the ECU lol?

@Neomustangs Год назад

Yes it connects to the board thru the Jport....

@brokentoolgarage8609 2 года назад

Awesome! Thanks for the info. Will Megasquirt stuff be upcoming?

@Neomustangs 2 года назад

Probably not I’m gonna be honest bud. I don’t get into that one at all

@brokentoolgarage8609 2 года назад

@@Neomustangs Thanks! I like the intro classical music!

@zerofoxgiven89 2 года назад

Maybe someone on here can help so I have a 89 lx 5.0 5speed car ran fine I did a top end swap on it but I noticed when I was adjusting the valves the car was acting like it wanted to start with the key off I was using the silinond to crank it over. When I go to start it now I get no fire at the plug but I can hear the injectors firing. Could it be the tfi module needs replaced?

@T-bird_Johnny 2 года назад

Could be a lot of things, I would start checking all the ignition components and move on to the wiring if no issue was found. How were actuating the solenoid?, could you have damaged it or shorted the surrounding wiring? But I would start with basics check all the ignition components if you're not getting spark. Hope this helps, just my $0.02.😅👍

@blindabinda1234 Год назад

Where about is your tuner located? I'm in New Hampshire

@Neomustangs Год назад

We tune in North East Ohio

@chrisbeekley1887 Год назад

Apparently you cant buy a quarter horse anymore. Any other suggestions for a chip.

@Neomustangs Год назад

You can still get a chip tune at the Dyno

@trailerpark187 9 месяцев назад

I have a 91 explorer intake and gt40 iron head with a b303 and it doesn't run really good. It kinda bogs under acceleration. Is my combo not good together, should I get a tuner? Idk what to do to make it feel right

@Neomustangs 9 месяцев назад

Tuner

@trailerpark187 9 месяцев назад

@@Neomustangs quarter horse unobtanium. Megasquirt?

@Neomustangs 9 месяцев назад

@@trailerpark187 terminator X call Donny B at Anderson ford Motorsport. Tell him I sent you

@Bob-Pye 2 года назад

Would you mail a custom tune iam for Canada? and thanks for the reply on my current combo mid 12s I like for a 2200 dollar car . 13.74 all stock at 103mph with front skinnys dumped exhaust stock gear last yr

@Neomustangs 2 года назад

We only do custom tunes as start up tunes for customers coming to the shop

@Nitro-fu7rv 2 года назад

So do you just need the L shaped chip? Or a burner as well? I heard someone say you need both

@Neomustangs 2 года назад

If you have quarterhorse and a license you don’t need a burner. A burner is for those that tune and people that don’t wanna buy moates just want a chip. The tuner burns it

@Nitro-fu7rv 2 года назад

@@Neomustangs gotcha. Thank you for the reply! Oh and I bought a H.O throttle body from you and it has been perfect so far

@ppamitch9005 2 года назад

I have an 88 speed density car, if I do the gt40 top end and a cam. Can I tune it this way to make it run fine without going mass air?

@Neomustangs 2 года назад

@ppamitch9005 2 года назад

No way to cam without doing mass air swap?

@turboman351w3 2 года назад

hey neo i need your help, i have a 2003-2004 cobra t56 10 spline, i bought the quick time bell housing for my 351w fox 157tooth , do i use regular t-5 cluthes right 10.5 clutch 10 spline right, please help

@Neomustangs 2 года назад

Yes. You follow the flywheel

@turboman351w3 2 года назад

Dude you just saved the day, I almost made a 1,000 dollar mistake thanks brother

@turboman351w3 2 года назад

@@Neomustangs I almost made a 1,000 dollar mistake thanks brother, you saved the day

@thatgreenrcsb 2 года назад

Quick question, who's your mad scientist tuner friend? I know several tuners in Ohio that tune with a binary editor. I'm just curious.

@Neomustangs 2 года назад

Dave Dalke

@thatgreenrcsb 2 года назад

That was one of the two names I was thinking. Awesome. Love your videos!

@jamiepearce4626 2 года назад

Anyone in the columbus area tune with BE

@Neomustangs 2 года назад

Just bring it up here

@ccchicken8889 2 года назад

Does it only work for MAF? No speed density?

@Neomustangs 2 года назад

Pretty much. There’s some files tho for da1 and DC Ecus out there with NA combos

@Riffs_Garage 2 года назад

Do you ever use tunerpro?

@Neomustangs 2 года назад

No but that’s another one to use for quarter I do believe

@Riffs_Garage 2 года назад

@@Neomustangs that's what I cut my teeth on when I first started tuning with a QH. I still have my B.E dongle. But im actually in the process of installing a terminator in my Capri. I hope it's not a mistake switching over.

@jasoncostello9709 2 года назад

Is there any way to know what factory stock tune is in a fox ecu if the labels part number tags have been removed.

@Neomustangs 2 года назад

What do you mean? You jport is open?

@jasoncostello9709 2 года назад

I installed a vortec s trim on my 1993 cobra many many years ago when I was young and didn't know any better. I had it chip tuned at a local shop and it has been like that for years. Decided to pull the s trim, 36 pound injectors and big maf off and put it back to stock. With the cobra meter and injectors that I saved. Went to pull the chip out and noticed the eec is completely missing all the tags to I'd it as an x3z cobra computer. Dont know if my ecu was replaced because I did not think those labels would fall off that easy.

@Neomustangs 2 года назад

@@jasoncostello9709 yep betcha you don’t have an x3z

@jasoncostello9709 2 года назад

So I am guessing the binary editor cant read the program on the internal chip to I'd it as an x3z if it was plugged into the eec that I have.

@Neomustangs 2 года назад

@@jasoncostello9709 what probably happened is the previous owners didn’t have a good x3z or got rid of it when they went to a super charger. So they bought a reman Ecu to tune that charger

@mikebrett2422 2 года назад

who are you using for tuning

@Neomustangs 2 года назад

Myself ?

@mikebrett2422 2 года назад

@@Neomustangs If you use me myself and i you can get it done 3 x as fast. Just wondering as I just got a quarterhorse for my car and looking for a tuner

@Neomustangs 2 года назад

@@mikebrett2422 been tuning for years.

@gmed9532 6 месяцев назад

new to foxbodys but is a a9l from an auto or manual

@Neomustangs 6 месяцев назад

Manual

@gmed9532 6 месяцев назад

okay thanks i didn’t think you’d respond due to how old the video is. but i am doing a t5 swap on my fox from auto. how come some people say me running the auto computer once the car is swapped to a manual that it’s better

@Neomustangs 6 месяцев назад

@@gmed9532 I try to keep up with all questions

@gmed9532 6 месяцев назад

@@Neomustangs have you ever ran into the this problem when buying a alternator bracket kit and the bolt they sent doesn’t fit in the head

@gmed9532 6 месяцев назад

the bolt worked on my stock heads but not on my 351w heads

@jpp9846 2 года назад

Would if you're rolling with a Da1 still? 😂

@Neomustangs 2 года назад

Lol

@angry408w7 2 года назад

old technology still works. but unfortunately you're at the mercy of the tuner and the availability of the dyno. this is one of the reasons I chose Pro M EFI.

@Neomustangs 2 года назад

Yes that’s the bottleneck