Tuning Rc Mono Hull Boats For Beginners - Stinger, Strut & Trim Tab Setup - Fast Electric RC Boats

Подписаться 16 тыс.

Просмотров 30 тыс.

50% 1

In this video im gonna do my best to show how to tune an RC mono hull boat. I will show you each position and prime positions for trim tab, strut, stinger, ruder, and turn fins on your Mono hull boat to get Optimum performance. I'm really gonna scratch the surface of tuning a boat touchbase on each aspect not all boats are created equal so what works good on my boat may not work good on your boat but the principles are the same
I Spent a lot of time making this video a lot of thought went into it, I hope you guys enjoy, please feel free to comment on and any aspects of the Video. If you know something that may help a beginner RC boater drop a comment I'm sure they will appreciate it, if you're new into boating take a look at the comments in this video there may be something in there that will help you out
Thank you for watching IRONCLAD RC a channel where we tinker test and tune everything RC. Don't forget to like comment and subscribe

Опубликовано:

29 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@LifenSantaBarbara 2 года назад

I really like your videos. I got into rc boating about a year ago and I don't know anyone in my area that is involved in rc boats so all my knowledge to date is mostly from RU-vid and some from trial and error. That being said, until I found your videos I've struggled to find good quality tutorial information so thank you very much. Much appreciated 🙏 ☺

@alantaylor353 2 месяца назад

I've just maidened my Vector Sr80 & it was a thrill.! I now see that I have a lot of experimenting & learning ahead of me. I wasn't getting the top speed I was after, probably in the low 30s. I think it's because my turning fins were too far down. I'll be out asap tomorrow to run more packs through it.!! 👍 👍 👍 Thank you for taking the time to do this for us noobies.! Please stay safe out there mate & the very best wishes from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🙏 ❤️ 📻 🕹️ 🔋 🛥

@IRONCLADRC 2 месяца назад

That's an awesome hull, have fun 👍

@alantaylor353 2 месяца назад

I've just maidened my Vector Sr80 & it was a real thrill.!! 👍 👍 👍 I ran 3 packs through it & I'll be out again tomorrow. I now see that I've got an AWFUL lot to learn.! 😉 😉 I wasn't getting the top speed I was after, probably because my turn fins were too far down... That totally makes sense about them only being in the water in the turns. Thank you so much for doing this for us noobies.!! 👍 👍 👍

@sashaV55 2 года назад

Beginner here.. This is a goldmine! Thank you for detailed explanations!!

@kenthorseman Год назад

I’m new to fast electric larger boats, I’ve got a barracuda 43, it’s not been in the water yet, but I’ve got stuff to do, such as trim tabs turn fins, even foam for the hatch. I see to race if monos but here in U.K. a lot of lakes and ponds are banningi c due to noise , but the smaller mono I’ve been borrowing runs differently. These videos have been a god send , I’m learning so much, thank you.

@kamando73 12 дней назад

Love your content ! I'm currently working on getting my Aquacraft SuperVee 27 back in the water after about 20 years ! Waiting for parts to rebuild the drive shaft. I'm considering hoping it up with new tech motor and ESC. It's a 45amp ESC now with NiMH batteries :) ANYWAY, This really opened my eyes to tuning that shallow vee mono when I get it back in the water. THANKS !!

@IRONCLADRC 11 дней назад

Good luck with your rebuild, and maiden. BG4L

@Dokroc78 2 года назад

Good tuning advice , trial and error. I've been struggling to get my Impluse 32 set up, this will definitely help. Thanks!

@jared6072 2 года назад

Great stuff big b! I just learned ive been doing the opposite of what i shouldve been doing with the strut to fix the squirrliness when giving it the beans on my deep v. Ive just been living with it and just not getting it too fast. Thanks man

@galvinbutterfield7071 2 года назад

Thank you very much, I'm about 4 months old into the rc hobby. I have 2 sonicwakes, this will help me a lot especially when I put the adjustable stinger on. Your videos are amazing.

@IRONCLADRC 2 года назад

Thanks brother glad I could help

@LostTribes. Год назад

Im just starting, and I’m more than grateful for this! Thank you!

@TargetingXmod_RC 2 года назад

One word.... THANKS!!

@vincentsanchez8174 Год назад

Awesome tuning video! I’m finally gonna pick up my sonic wake V2 this weekend.. this video is gonna help me out a lot !🤙🏻

@tedshen1716 2 года назад

Thanks you soooo much bro. Excellent tutorial. Will try them out on my next mono run.

@paulscrivener4307 2 года назад

Love your tutorials bro, keep em coming I'm hooked 🇬🇧

@brandonlent5993 Год назад

Perfect for myself,gotta sonicwake on the way, my first boat ever and stoked to get it especially since starting to watch your vids! really appreciate them,thanks

@nj2033 2 года назад

Thank you for showing what each setting does.... Best video in RU-vid for this

@jimstone5339 11 месяцев назад

Thanks I'm very new to this so new that I've ordered a sonic wake and haven't even received it yet. But you taught me a lot. Thank you

@ebandcamp Год назад

Good job explaining . Used to run the big gasoline boats 23 cc B.H.Hansen motors and others , electric race trucks . So much fun . Your giving me new ideas !

@IRONCLADRC Год назад

Thanks brother, I appreciate gas boats I currently don't own one but my father built a few fast rc gas boats that were a hoot. Thanks for watching

@LifenSantaBarbara 2 года назад

Love all your videos man!!!

@generac43 10 месяцев назад

Great information! Thanks.

@wtfmimshag 11 месяцев назад

Hi mate, your content is great - super informative and highly entertaining. Thanks for sharing your wisdom with us newbies. I dont know what it is about these boats but its super addictive. Maybe because you dont have all the hassle of finding spots to fly planes, or all of the expensive broken bits on the big trucks lol.

@IRONCLADRC 10 месяцев назад

Thanks, brother, in boats!

@nj2033 2 года назад

This is a great video! Thank you!

@MrTetards 2 года назад

Thanks for your advices, very usefull

@IRONCLADRC 2 года назад

My pleasure!

@Dragonewiz 2 года назад

Well done good captain!!! GREAT ADVICE...Nice video ...!!! Thanks ;-)

@Larfinkle Год назад

Great stuff!

@roadstar499 Год назад

this is cool ,watching this video is very helpful....my old sword fish has shims from factory pushing stinger down a bit...its a cheap ass stinger... down the road i may do some upgrades to it... i love improving performance on my boats...

@oktrevor2010 10 месяцев назад

Good video, very helpful. Please tell everyone to disconnect batteries before handling prop, infact never handle a prop period.

@SnapperHeadUnlimited 2 года назад

Once again awesome video, this is exactly what I was looking for! I’ll be sharing the hell out of this video on Facebook pages!

@IRONCLADRC 2 года назад

Hope this helps with the traxxas spartan.

@SnapperHeadUnlimited 2 года назад

@@IRONCLADRC Thanks brother, your videos are always educational and helpful. What thoughts do you have on a video about cooling advice; bigger tube, smaller tubing, using T or Y fittings to run two inlets to a ESC and dual outlets, running a pickup of the strut rather than a dual pickup rudder or both. Id there a such thing as over kill on "too much" cooling? I also see a lot of misconceptions and questions on batteries, specifically weather you should run higher "C" ratings to decrease heat or stress on the ESC between say a 35c, 50c and 100c batteries.

@vitaliy4701 Год назад

Nice and powerfull👍

@ronhodgkinson7683 2 года назад

Thank you for the tips

@IRONCLADRC 2 года назад

Glad I could help

@bequiakt 2 года назад

Great tutorial for the boating community especially the nubie . Will like to see a tutorial on low lift v high lift props..

@IRONCLADRC 2 года назад

Thank you very much, I'm gonna start working on the prop video soon.

@jonathankey1226 2 года назад

Dang 6s would be awesome please do video. Buy the way great video on setting up boat 👍 keep up the channel it's 🔥 ✌️

@richardlandry Год назад

Thanks 😊 👍

@richardlandry Год назад

Thanks👍👍👍

@PMGaming101 2 года назад

hahaha you are the king thanks bro

@chrisweigo36 2 года назад

No one could have explained that better awesome vid mate

@IRONCLADRC 2 года назад

Thanks brother

@MrRitanTech Год назад

Sir your video is halpfull 😘😘😘😘👌👌👌👌👌👍

@MrRitanTech Год назад

I'm your subscriber

@sethw1230 2 года назад

Can you tell me where the turn fins have to be to be out of the water, except for when turning? Thank you. Great video!

@IRONCLADRC 2 года назад

I usually mount them on the inside of the spray rail 90°to the bottom of the boat.

@garybeckwith9045 2 года назад

Sir. Very helpful video. I am an old boater with weadeater experience so all of this stuff is new to me. I recentlly purchased a Vector SR 80 Pro. I live in Japan on a relatively quiet saltwater location in Tokyo Bay. I rarely have the pond smooth water in this video so I'm looking for your opinions on minor chop tuning. Thank you.

@IRONCLADRC 2 года назад

I'd try running your battery back (CG) farther back in the boat so she doesn't nose dive in the chop. You can also put a little positive (up) angle on the strut/stinger to plant the boat a little more? Hopefully this helps. The adjustments should be minute in small increments according the the water conditions

@garybeckwith9045 2 года назад

@@IRONCLADRC Thank you. Inexpensive boat so adjustments are minimal, Roger on the trial and error.

@garybeckwith9045 Год назад

@@IRONCLADRC Thanks.

@heinekendino Год назад

Could you provide any setup info for catamarans “Veles 29” trim taps and turning fins? Are these ok to use on catamarans?

@IRONCLADRC Год назад

The veles does not need trim tabs or turn fins. You use props and weight distribution to tune a catamaran

@6-Iron 2 года назад

Are there struts and trim tabs available that have incremental markings? This would allow you to log you settings and make tuning a lot easier.

@IRONCLADRC 2 года назад

I use a scribe to mark my strut when I hit a sweet spot

@goodlove7732 5 месяцев назад

Hey man I have a question I have a big Apache 84 inch v hull boat that weighs about 55 lbs what size motor do you suggest for something like that Electric

@IRONCLADRC 5 месяцев назад

Wish I could help, I don't have alot of experience with larger boats of that size.

@bobhoyer 2 года назад

I looked on Horizonhobby monohull ... they have Impulse 32" or Sonicwake 36" ... which would be closes to Venom so we can mimic your work to see the same performance?

@IRONCLADRC 2 года назад

Both boats are amazing, impulse 32 is fiberglass and has more power than the sonicwake. Sonicwake has a the self righting feature which make it a little more user-friendly. If your looking for performance I'd get the impulse 32. Hope that helps?

@bobhoyer 2 года назад

@@IRONCLADRC Yes it does ...

@bobhoyer 2 года назад

I also had another question, its about the flating of the V-hull mid boat to stern, Can this be done on these fiberglass boats and repainted or reglassed then primed / painted. Your thoughts?

@williamwise3050 Год назад

Can you do a video on the ft 011

@IRONCLADRC Год назад

One of these days

@kalacakra14 2 года назад

Hii sir... I want to ask, how to setting flexshaft n pipe shaft water cant insert it? Tell me plz ok. Make a tutorial video 🙏🙏🙏

@IRONCLADRC 2 года назад

Ok I will try to make a video in the next couple days

@kalacakra14 2 года назад

@@IRONCLADRC thx sir... Coz my boat always inserted water from pipe shaft 😭😭😭.

@bjornej1 2 года назад

Hi I'm building me an 31" 80cm arowanna monohull and I'm a totall noob it's my first built. I have an issues with what type of prop I'm going to use. Specs China made 120A esc China made 1900kv motor 9kg servo 5s 5600

@IRONCLADRC 2 года назад

Check out Paul Cooper on youtube he is building an arowanna

@andrewcantoria347 2 года назад

I want to build my own rc boat but here in Philippines battery and motor is much expensive

@stefanvujic3102 Год назад

Which esc are you using?

@IRONCLADRC Год назад

I've got a rc boat bitz 175a esc in it right now with a rocket 4074 2000kv

@petrosmosxopoulos3730 2 года назад

What rudder is this?where can I buy it?

@IRONCLADRC 2 года назад

Ose dual pick up rudder www.offshoreelectrics.com/proddetail.php?prod=ose-83347

@UppfinnarAXEL 11 месяцев назад

What’s your cg on this boat?

@IRONCLADRC 11 месяцев назад

Just a little forward of 1/3 from the transom

@vincentlee3434 2 года назад

What about turn fins? You didn’t cover too much on that. Thanks

@IRONCLADRC 2 года назад

I have an old video about turn fins full install and test. AL about turn fins. I will include the Turn fin Install & test linkru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v1G_9Oiz7n4.html. Turn fin test explained ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R7p3D0cQZ1o.html

@MrRitanTech Год назад

Sir I'm from Indian boy

@MrRitanTech Год назад

Sir please halp me 😊

@zeeek1 9 месяцев назад

....

@robertschmidtrcmodelboats6483 2 года назад

How do you get advertisements on your channel? I have an RC Boat scale RU-vid channel Robert Schmidt RC Model Boats

@IRONCLADRC 2 года назад

Minimum 1000 subscribers & so many hours of watch time to get Monetized Once monetized they add Adds to your channel so you can get paid thu youtube partner program.

@IRONCLADRC 2 года назад

Whats the name of your channel

@robertschmidtrcmodelboats6483 2 года назад

@@IRONCLADRC Robert Schmidt RC Model Boats