TURBO'D ROTARY MINIBIKE - Finishing Touches! | Episode 3

Подписаться 178 тыс.

Просмотров 100 тыс.

50% 1

RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
If you would like to get a turbo of your own as well as helping our channel, use the link above!
ROTARY POWER MERCH - teespring.com/...
This is episode 3 of the Turbo Rotary Minibike, and we finally addressed some of the problems and shortcomings of our previous setup. We saw your comments (special thanks to Bart on Instagram) and fixed our oiling system by switching the inlet in outlet and adding a larger drain tube. We finalized the “charge pipe” and replaced the old rubber “boost tube” with some proper steel. The wastegate had to go due to space and in this application, it won’t be making enough boost pressure to activate it. We cut apart the old turbo go-kart exhaust to create a custom exhaust for the minibike and then started it up and tuned it! It’s sounding great!!!
Thank y’all for watching, stay safe, and be sure to stay tuned for the next episode, the FIRST DRIVE!
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/...
--------------TOOLS------------
RogueFab Tubing Notcher
www.roguefab.c...
Pro-tools Tubing Bender
pro-tools.com/...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com...
Optrel Grinding Mask
usa.optrel.com...
---------MUSIC --------
Music - Background and Montage Music Is From Endemic Sounds
www.epidemicso...
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
-----PARTS-----
RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
Pulse Pump- www.gopowerspo...
Seat - www.gopowerspo...
Chrome Shocks - www.gopowerspo...
Chrome Wheel - www.gopowerspo...
Inner Tubes- www.gopowerspo...
Tires - www.gopowerspo...
Gold Chain - www.gopowerspo...
Fenders - www.gopowerspo...
¾ Lock Collar - www.gopowerspo...
Brake Band- www.gopowerspo...
Brake Band Pin- www.gopowerspo...
Brake Cable and Lever- www.gopowerspo...
Jack Shaft Sprockets - www.gopowerspo...
Jack Shaft Lock Collars- www.gopowerspo...
Jack Shaft (10 inch with lock nuts and key) - www.gopowerspo...
Grips and Throttle - www.gopowerspo...
Clutch - www.gopowerspo...
RLV Muffler - www.gopowerspo...
Weld On Tabs - Amazon affiliate link: amzn.to/2XOoIIv

Авто/Мото

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 244

@ratherBweldingChris 3 года назад

FIRST!!!! The mini bike looks and sounds amazing guys👍

@BuildBreakRepeat 3 года назад

You win lol. Thanks man, been loving your electric minibike series!

@inspireonex 3 года назад

I'd like to see a collab here. That would b epic.

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BoIgEsijfbEh.htmlehe

@esqueue 3 года назад

@@Hitycooking I'm going to start reporting your posts as spam.

@sr2Xvet 3 года назад

Ya to bad it’s the same as the last video minus a metal charge pipe and eliminating the wastegate that should of been done last video and this should of been a test video. To much wasted time.

@mflbikes1870 3 года назад

Change the oil ratio to 40:1 so everything in there stays lubed up.

@aaronkessler315 3 года назад

I was thinking 50:1 but that should work too

@mflbikes1870 3 года назад

@@aaronkessler315 thats less oil

@aaronkessler315 3 года назад

@@mflbikes1870 I know but my 2 rotor engine recommends about a 75:1 ratio typically

@mflbikes1870 3 года назад

@@aaronkessler315 thats with an omp

@Recklessford 3 года назад

Make sure the waste gate valve is closed tight. Even the slightest leak will affect its ability to spool up.

@SuperRon 3 года назад

Boost pipe looks fantastic, great work doing it in one piece!

@kennethmoles4643 3 года назад

That is certainly over the top and should win the "Pure Wicked Award"!!!

@jameswarren1871 3 года назад

One of the coolest things I've seen in a long time.

@shaunpc2512 3 года назад

Congratulations guys it’s sounding so so much better than it was before and thanks for taking the advice and going to solid boost pipes.

@Tampaboys 3 года назад

It’s sounds so cool guys great job you can hear that lil turbo spooling up so sweet this is such a great build got to share this on my page

@BuildBreakRepeat 3 года назад

Thank you, feel free to share!

@Tampaboys 3 года назад

Build Break Repeat great job guys really cool stuff your building I bet that is a blast to ride can you feel the turbo spool up

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BoIgEsijfbEh.htmlwhw

@Tampaboys 3 года назад

Hity Design that’s sweet

@bighomieJ5X 3 года назад

0:38 bald eagle approved 😂😂🦅🇺🇸 cleetus would be proud .

@esqueue 3 года назад

Cleetus uses the sound of a Hawk. Ever heard how a bald eagle actually sounds?

@bighomieJ5X 3 года назад

@@esqueue yeah worked at a zoo for 3 yrs they do sound similar .

@Rattus-Norvegicus 3 года назад

Cleetus is trash

@NorthernPerformanceGroup 3 года назад

I think rob dahm Approves more

@levihutchins8467 3 года назад

I’d put that wastegate back on. Any turbo has the potential to over boost and that wastegate at spring pressure is always a fail safe. Cool build tho 👌🏻

@drgibs347 3 года назад

Thank you for taking my advice on the not fuel rated boost plumbing.

@mopedmessiah 3 года назад

Well, that kills my plan for supercharging my scooter then 😂. Would a rubber tube work if it was fuel rated?

@BuildBreakRepeat 3 года назад

Thanks for the advice!

@Jan-ny8hn 3 года назад

I dont recommend it, but you can try it with some steel reinforced rubber lines. Gasoline resistant PVC pipes do also exist, that could work pretty well and is easy to work work with.

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BoIgEsijfbEy.htmleye

@mopedmessiah 3 года назад

@@Jan-ny8hn my main worry is fuel atomization. Im using a smog pump to create a draw through system. Id only need maybe a foot of rubber intake to go from the output to the intake on the motor, so idk

@AtariBoogie 3 года назад

My favorite intro of any channel

@tylercarte3170 3 года назад

Hell yea!!! I can't wait to see that thing rip!!

@ggggggg4327 3 года назад

you are pros, my heroes, i hope one day i could walk the steps you stepped. I really need to save money for those days, wish me luck ! :)

@misterdeedeedee 3 года назад

the wastegate actuator also has the job of holding the wastegate closed while below its boost threshold, so by removing it youre allowing the wastegate to do whatever it pleases and exhaust is going to push it open and kill any spooling. be sure to jam it all the way closed if you want any chance of building boost.

@minor0confusion 3 года назад

glad youfigured it all out, comming together niceley. now to put a bolt in that wastegate so it doesnt blow open :D

@Peters202 3 года назад

if using a bit of 2-stroke olie in the gas will help lifetime a lot

@Hamsteren91 3 года назад

If you want more turbo air volume you could add a plenum chamber to the boost pipe. It's a rad little bike.👌

@minor0confusion 3 года назад

its wet charge, this will create SO much more lag than the gains it produces

@Hamsteren91 3 года назад

@@minor0confusion Because of the indirect flow path or? I can see the problem, but I would think the pressure could compensate for that.

@minor0confusion 3 года назад

@@Hamsteren91 the larger the charge area, the more innacuracey the fueling will have throughout the boost build period. wet charge or drawtrhough will always create rich lean issues and increasing the area is literally adding more dead space of incorrect fuel mix. itl spike all overthe place and be rich as hell when not on boost just to stay in a nice range full throttle full boost. id be tempted to run the boost signal from the wastegateinto the overflow of the carb itself. this should equal bowl pressure with boost pressure altho fuel pressure wouldbe required even if only 1 or two psi. i thinkthe lads are doing well to do this the easiest way possible. the shorter the distance between the carb and the inlet port the better in this case. altho wuith a dry charge you areabsolutly right. the plenum only holds air.. not air and fuel.

@400sbccamaro 3 года назад

Yall just turbo things for the SOUNDS OF THE SPOOL

@noahpaulette1490 3 года назад

This should actually increase performance by a good amount so it's not completely pointless.

@400sbccamaro 3 года назад

@@noahpaulette1490 of course but did u see their last turbo build it was gutless. This will be no different they are just using the fame of turbo because its the trend they wont actually make it perform well

@ethancoy9237 3 года назад

@@400sbccamaro actually it should work a good bit better on the rotary because of how they work, a rotarys actual displacement is about double what is written in specification plus this probably revs higher and works kinda like a 2-stroke, which means more exhaust gas to flow through the turbine compared to a single cylinder 4-stroke

@400sbccamaro 3 года назад

@@ethancoy9237 I'm not saying it cant be done but I dont think THEY will make it work

@ethancoy9237 3 года назад

@@400sbccamaro I'm sure it will be fine, they will figure it out, it's less complex than the last so there's not much to go wrong

@awright9183 3 года назад

Awesome job guys, ive been looking for one of these engines for years but there not easy to find Down Under in Australia. Hope alls well were you are, keep up the awesome builds... Truly inspirational. 😉👍

@coops3834 3 года назад

These little Sachs rotary engine are out there. They come up for sale on trade me New Zealand🇳🇿

@shredder_mang3211 3 года назад

Check eBay

@awright9183 3 года назад

Thanks for the replies and advice... ive been searching ebay, gumtree, facebook. The only complete sachs engines I've found are almost $4,000 and as much as i want one, thats just way to expensive considering whats out there for a quater of the price. Ill just have to keep looking. Cheers 😉👍

@simonyun1883 3 года назад

Ayyyy, I'm glad that it works!! I'm anna get a pulse pump for mine after u guys ripped it around for another video, cuz I want to see if the turbo starves of oil when working for a longer time.

@capttom7772 3 года назад

I never doubted it! I might be old..........but I wanna ride it!

@billthetaxman89 3 года назад

Both of you seem like honest solid dudes. Don't see much of that nowadays Love the content ✌️

@orangefoxx9939 3 года назад

I see you guys have your brake system mounted to the clutch, while it works it would be safer to have one on the rear wheel. With the current setup if the chain falls off you no longer have brakes either. Just something to consider. Very cool and well done build so far!

@ryanschanfish279 3 года назад

I haven't seen one of y'all's vida since the rotory cart. Those locks tho bro!!!

@ryanwade6700 3 года назад

Exhaust side of the turbo should be same diameter as the turbo exhaust housing it’s pushing all of that air into a tiny pipe, open it up less restricted more flow

@lead5s 3 года назад

man i love the suspension on that sucker

@trentschaefer6693 Год назад

These guys are good bro. Good work.

@mRnIcO-ro7nw 3 года назад

Dope intro

@xSiC84 3 года назад

Very cool build. I would like to see a boost gauge lol. Either way thanks for the work guys.

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BoIgEsijfbEh.html2u2

@oliverscorsim 3 года назад

Still needs a real oil pump but I'm very glad to see you guys listened to the blow through advice but here's some more knowledge throw that air filter off it won't flow 10hp well and throw a 180 main jet in to start. Should rip pretty good but I would try to redo that charge pipe so its down hill from the turbo and it can idle for a while without loading up. Don't try to hit boost with that tiny main in either it will get lean and last that carb looks tiny for the application 😂 I started with the same thing basically but quickly learned a 36mm mikuni really freed up power up top and made hitting boost faster and easier. It also made boost matter alot more and started to actually make power I was expecting but idle quality went way down hill.

@Turbowagon 3 года назад

I would throw a short section of rubber on both ends of that intake pipe. When things get warm and move its going to leak

@PHUSII 3 года назад

This will be awesome!

@DougL12 3 года назад

That is the coolest mini bike.

@jittfromtbc5699 3 года назад

Heck yeah guys that mini bike is sounding good

@CainSample 3 года назад

Your the man jitt👍✌

@jittfromtbc5699 3 года назад

cain sample heck yeah bud trying to be

@ashleywalker8988 3 года назад

Awesome, but with the carb unlevel the float won't act properly and it will starve itself of gas when you hammer down on it. Great work tho! Keep it up!

@TTime685 3 года назад

9:36 What is going on with that hair? 😂 You look like my sister

@randyhertzberg7549 3 года назад

what's with the girlie ass head band ? ...you look like TTime's sister

@scottmcneil4598 3 года назад

Still being a bully? And on the computer even LOL nice work dude

@TTime685 3 года назад

@jason crigger Since when do guys have hair like that? 😂 You're just a modern day kueer

@capttom7772 3 года назад

@@comediccommentator4663 ; You FUNNY !!! ...LOL...(seriously)

@gwgillham 3 года назад

Nicely done guys. Looks good. Look forward to seeing you guys rip it up.

@IllegallyAcquiredKIA 3 года назад

With small carbureted engines they are really sensitive to the length of intake pipeing youll notice performance loss with even slight changes your turbo could make up for the loss but not increases from how it was before the turbo.

@hollycheater858 3 года назад

I’ve been waiting FOREVER

@brandonhewitt2386 3 года назад

Been waiting on this!

@discontinuuity 3 года назад

Y'all should put a blow off valve on that charge pipe, because if you don't then it will turn into a pipe bomb when the engine backfires (which rotaries are known to do). Happened to a friend of mine with his supercharged racecar.

@maxhammontree3169 3 года назад

Dude, loose the hair bow thing!

@louiew1752 3 года назад

this is the coolest thing I have ever seen

@Nitewatch-xc9yz 3 года назад

Awesome job guys,,,, can’t wait to see the first rip

@RAWRMotorsports 3 года назад

This thing is dope yo !!

@jow4040 3 года назад

Intercooler and MORE BOOST!

@coaxialgyro 3 года назад

I bought some of those engines that were being sold with some turbos and Walbro23b carbs , hadn’t bought the turbos but carburettors are all position good and diaphragm pumped . It was from an abandon production project , they sent them in the flying in sky like rockets . I was going to try using a Garret12 with mine.

@ghettobikelife8833 3 года назад

Sachs Km48 engines like this?

@gta5grindzxb145 3 года назад

Love the band brake setup, probably gonna copy it on my 212 predator three wheel bike build I'm looking forward to doing. Right now has no rear brakes. Going on a Worksman 20 inch trike.

@MrThunderCunt 3 года назад

It would be cool to get an RX 7 Powerwheels body and build a rotary powered RX7 go kart.

@SiR2Dean 3 года назад

For the love of god boys, just bloody take it out for a spin

@hillonwheels8838 3 года назад

This is sweet but I think the exhaust is to small diameter for the air you are pushing through it. Rotary engines like lots of air in and even more out to be working at there best.

@griffinoneal1856 3 года назад

Scrappy Brappy

@nicholasself8161 3 года назад

Let's put a juggernaut from gopowersports on that bad boy!!!!!!!!!!!!!!!!!!!!!!!!

@jtothefx 3 года назад

Burp burp burp burp love that sound!

@samsgarage1716 3 года назад

Nice job it looks like it’s going to be fast.

@dandil 3 года назад

no wastegate? UNLIMITED BOOST! XD def consider a throttle body post turbo instead of pre turbo...

@geegeealin 2 месяца назад

So awesome

@Llyduramax 2 года назад

Yes

@FabFiend 3 года назад

Looks sick should be quick. Only thing is I hope the chain don’t break cuz you won’t have any brakes

@shredder_mang3211 3 года назад

No chain means no go my guy

@luke_sw7657 3 года назад

Hey this is prity huge, you need to weld the wastegate flap closed or your not going to get any boost

@deamoneater357 3 года назад

Sounds amazing!

@leoboy191 3 года назад

I wanna ride that bike 😀 sounds sooo good. Great job guys.

@richa9719 3 года назад

Awesome job!

@rydplrs71 3 года назад

Awesome job, you’re going to need a bigger bike to really rip it.

@Hellsong89 3 года назад

Yeap and could potentially get second engine and make two rotor wankel out of this!

@braptasticfilms3791 3 года назад

What mixture are you guys running? Make sure it’s got plenty of oil, would hate to mess up that motor

@koekcoek 3 года назад

sounds freaking amazing love the idle

@averagecarguy420 3 года назад

One rotor braps

@LS_Jo 3 года назад

been waiting on this 🔥🔥

@finishinglapis608 3 года назад

Y'all need to make a 4 rotor mini bike

@BoogalooShrymp 3 года назад

Sic!

@Mikedesign01 3 года назад

muy buen proyecto, hermoso motor felicitaciones, saludos desde argentina!!!

@gooberclese 3 года назад

I want to see that motor and turbo set up put on something bigger like a old dirt bike . Then give us a top speed run on a road.

@melted_pistons 3 года назад

I still don’t think the clutch mounted brake is a good idea

@aaron71 3 года назад

whyzat

@melted_pistons 3 года назад

aaron71 if you’re meaning to say “why’s that?” proper English would be better. I say that because if the engine runs away, that brake will be overpowered compared to brakes on the wheels

@shaynegadsden 3 года назад

@@melted_pistons that's isn't a worry engine run away isn't really an issue and the brake is more than enough how ever i do agree it isn't the best spot mainly because there is 2 chains so twice as likely to have 1 fail and if that happens there is no brake

@larrybl 3 года назад

@3:44 Dude get a hair cut!

@crybabylocr4012 3 года назад

I like it 😎

@justincollier9769 3 года назад

Where did you get the engine

@JulitoPapitoo 3 года назад

Ebay I believe

@kevinwiebe4136 3 года назад

So its not going to make boost unless you weld the waste gate valve closed

@brmotoren9889 3 года назад

But like a small lever on the handlebars that manually actuates the wastegate for BOOST!

@M1R00TJ3 3 года назад

this is so dope

@_elation_ 3 года назад

brap brap brap brap

@raphrath8561 3 года назад

to be real you guys should really get it fuel injected somehow. mechanical fuel injection would probably work fine

@catfish_lude 3 года назад

id make an FR Go cart with this

@lewisheilig988 3 года назад

All I can honestly tell y'all is I'm jealous as f*** and where did y'all get that motor from man eBay or something and what's the average price on them please do let me know thank you

@kontrolledkhaos4853 3 года назад

Do you have all the information on the turbo

@stevenhaworth9 3 года назад

he looks like a girl from the 90's with that hairband

@Rattus-Norvegicus 3 года назад

Haters gonna hate

@BUILDNIGHT 3 года назад

Steven Haworth I couldn’t even hear what Daniel was saying because I was so focussed on that girly hair band! I like the channel, but he’s GOTTA cut that hair off!